recovery of the password of the administrator, with lost password

Similar Questions

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• How can I change the setting in the administrator with the password in Windows XP?

  How can I parameter string in the admin with the password in windows xp professional

  You can not.

  John

• Unable to connect to the administration with FMS4 on Amazon EC2 console

  I can start an instance of Flash Media Server 4 on Amazon EC2, using the public FRIEND of Adobe, and I am able to view the vod and live samples of media with no problems.

  I can't SSH into the running instance, and I also bring to the top of the web page Admin Console for this instance in a browser. However I was not able to connect to the administration Console.

  Before you try to connect to the administration Console, I modified /opt/adobe/fms/conf/fms.ini insert a username and password, and then I saved the modified file.

  I've also updated my security group to add a custom TCP rule for open port 1111.

  On the login page Admin Console fields, I kept the name of default server 1 server.

  For the address of the server, I tried both localhost and also address public DNS my EC2 instance.

  I used the username and password I put in fms.ini.

  But I still can't connect to the administration Console.

  Help, please!

  [I looked at old point http://forums.adobe.com/thread/678832 , related to this topic, but that has not helped to solve the problem.]

  By default: Admin Server is not running on the EC2 instance. You must manually start after you have added the user name and password in fms.ini. I see that you have entered the user name and password - but I suppose you couldn't start Admin Server and therefore, you are not able to connect. Do step to start admin server on EC2 instance below

  PuTTY session you EC2 instance

  Go to/opt/adobe/fms

  Run the terminal command >. / fmsmgr adminserver start

  To make sure you please run: ps f | grep fmsadmin - this will let you know if admin process is running or not

• Partition problem after the recovery of the system with a single key 6.0

  I need your help!

  My Lenova Ideapad Y430 not more start and I had to restore the system with the recovery CD I burned with a recovery key 6.0. The restore process showed no defects and no error has occurred.

  Now, after restaring the system I only 0 with a C: partition (all program files, vista, drivers etc.) 104 GB and the 'part of recovery for a key' 14.75 working. D: partition where all my documents, pictures etc. are stored are listed, but idle and not accessible nor editable with the tool Vista Diskmanagement.

  No idea what I can do?

  You can download EASEUS partition manager. It will help you to reformat the D drive.

• Delete the database with lost initdb.ora

  Hi guys. How can I remove database with file init lost? I just want to recreate the database (with recovery or restoration of the process)
  
  1. I can't start because I do not have init.
  2. I can't delete the database because I can't start.
  3. I can't recreate database using dbca as the same name somewhere is:)
  
  Published by: America on January 18, 2009 12:03

  When you run "dbca" you can select "delete the database" and find the old name of the database?
  If find... You can select and delete... dbca will ask... But you and click on remove in any case.

• "Dell Backup and Recovery" asking the upgrade with the inspiron 15 model

  Hello

  I'm new to this forum and also started to use the Dell laptop. I bought Dell Inspiron 15 (model 3521) 01-Jan-2014. I am trying to take backup of my laptop on a DVD. When I clicked on 'Backup and restore of Dell' app in app Manager. I try to click on backup system option 'Dell backup and recovery' section, its upgrade premium or enter key. Its not that allows to create backup DVDs.

  What may be the issue? Because when I bought it, seller said that his original one.

  It's part a scam from Dell.  I've got 5 Dell portable computers/computers / tables all have this software on it with a VERY limited useage then weekly or if I get a pop window op offering the upgrade at a special price which, in the end, is the same price as if you would have just bought or 'improved' (like Dell likes to call it) the program to a regular price which IS : 39.99.

  What I hate about businesses, in particular, the one that I spend a lot of money with it, is when they think they can put a quick access on me or in my case 5 times that I have 5 of these upgrade special offer windows popping up each week.

  You're better off getting programs like Goodsync which will back up your computer or synchronize your files on an external hard drive, and that you can use on all of your computers for only $29.99.  I use it on my servers and my offices.

  Otherwise good luck with Dell and their implementation to special day called 'offer' that is the price of retail, after all.  NOT COOL DELL ALL!

• remove the administrator with another administrator user account. How to restore the former.

  Initially, I created an administrator account on new computer dell laptop. I created another account to administrator subsequently and deliberately deleted the old user account without keeping the files. But now, I noticed that I lost my important files and folder with photos etc please help me to restore my account like administaor and its files as well. window 7 Home Basic operating system.

  Yes. I can see the folder "satya".

  OK, now you can try this to restore your lost files:

  1. Reboot the computer.
  2. Log in under another account admin as "satya".
  3. Open Windows Explorer.
  4. Navigate to the c:\Users folder.
  5. Right click on the folder "satya".
  6. Click "restore the previous version.
  7. Follow the prompts.

  It would be a good time to review your backup strategy. A lot of people don't bother on the safeguarding of their irreplaceable files until they are suffering from a major disaster. In this way on the need to back up files regularly to a media independent learning can be extremely painful.

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Computer Dell laptop, they put as administrator with password created now says access denied need to log on as an administrator. But I did not log Administrator icon

  I've had my laptop by dell. on their return, I was signing the administrator with password created. It was working fine until I got the blue screen of death, and then in the mist to restart on the desktop, the windows 7 installation began as I receive it. Well, I got a few documents and photos that I had and they are no longer under one account I created. Also, now I can't print it said access denied need to log on as an administrator. But I did not log Administrator icon more. Help, please!

  I could do this:

  • Reference Dell request the logon credentials.
  • Plan in advance and create, test and document a spare, even admin account that you have a spare House key. Relying on a single unique administrator account is far too risky!

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• cannot log on as administrator with the password and open a user button session sends to the temporary profile.

  cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk.  She lost all access to his information.

  Original title: cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk. She lost all access to his information.

  Hello

  • Remember to make changes to your computer before this problem started?

  However, you can access the link below and follow the steps mentioned in the article and check if it helps you to fix the problem, and connect you to your normal user account.

  http://support.Microsoft.com/kb/947242

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am an administrator with a password but win 7 refuses to perform a file saying I don't have permission, I have to do something more to be recognized by the system as admin__

  I am an administrator with a password but win 7 refuses to perform a file saying I don't have permission, I have to do something more to be recognized by the system as admin?

  rtzill,

  To activate the full administrative privileges with a normal Windows 7 user account:

  Open an administrative command prompt (right click; Run as administrator)
  Type "net user administrator activate: 'Yes and press ENTER."

  That should help him.

  Kwame Danquah Jr. V.P. [InfoTech - Infrastructure, comm., & security] | Bison MicroSystems Limited | #1 4th link Samoa | CF Estates | Box a 12685 | Accra - Ghana. | www.bisonmicrosystems.NET | InfoTech solutions |

• I have a problem with the connection to the computer after you forget the administrator password.

  Original title: Windows administrator password

  I forgot my password for windows 7 on a HP Pavilion laptop. I use the fingerprint reader to log on now (Administrator). I do not have the password reset disk also. What should I do to reset the password?

  Thank you...

  
  

  Here you go:

  1. Start the computer with your CD to repair Windows.
  2. Select "Repair Mode".
  3. To set Windows to a point before you changed the password, use "System Restore".
  4. Sign in with your old password.
  5. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

  It is available, you have an installation CD or created a CD to repair.

• I have a problem with the connection to the computer by using the administrator password.

  Original title: RESET MY ADMINISTRATIVE PASSWORD!

  I read a LOT of reviews Q & A on this website that attempt to explain how to change a password administration windows 7, but none have helped. I wanted to put parental controls on my account initially in order to avoid the display of some sites on my browser. Of course, I didn't understand that this control is defined in the internet options. In my ignorance, I went for the parental controls in Control Panel but found that I couldn't put parental controls on my account because it was the only account and, therefore, the administrator. To set up parental controls, I created a new account. Later, I changed the settings of the account on both accounts. I changed the new administrator account and changed the original account (use the Everyone account) to a standard user. Therefore, I have contiunued to try to put in place controls, but I was interrupted by a completely random computer restart! I DID NOT HAVE IT! I was pretty confused, but I decided that I would forget the reboot and connect to my new administrator account to continue with the configuration of the parental control. Do not forget that I have not set a password for this new account yet, so I wasn't surprised when he asked for a new password. So I typed in my old password from my previous account, (who had been the administrator password), typed the password twice and you press on enter. He said it was the wrong password. I typed in every password I've ever had in and since then I have not had administrative access to my own computer. I tried to access the cmd and as an administrator, but it NEED THE ADMINISTRATOR PASSWORD! PLEASE HELP ME!

  Here you go:

  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point before changed your account details.
  6. plan in advance and create, test and document a spare, even admin account that you have a spare House key. Have a single administrator account is taking a huge risk.