Recovery of the trial process.

Similar Questions

• 3011G satellite freezes the recovery running during the formatting process

  I work in a computer shop, but I think it's better to try to post here and hope for the best, but to send the computer. I'm working on return to Toshiba as DOA.

  Basically, the problem is, when I run the restoration, the computer crashes during the formatting process to 'Progress' 23-11 minutes from the end.

  Since it is not the first time I have a problem with this particular model, I wonder if someone more clever that I had found a workaround... The operating system is Windows Vista and I use original CD to start the recovery.

  Any help would be appreciated.

  PS Excuse the bad English, I'm typing this with my left toe (figuratively). A lot of work today, huh.

  The Satellite 3011 G is unclear to me. Are you sure you typed the series of laptops good?

  In any case, the installation should generally run smoothly, without any functioning anomaly.
  The HARD drive has been formatted in the wrong way or HARD drive could malfunction.

  So in any first you have to format the HARD drive and remove all partitions on the HARD drive
  I noticed several times as HARD drive partitions a bad may have a negative influence on the installation of the OS since the recovery CD!

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• I ended the trial of recovery vista window and the credit card was not credited back

  I ended the trial of window vista recovery program has been removed from the computer and my credit below was not credited back

  Hello

  Windows vista recovery is Malware

  Contact your credit card company

  Read about it

  Windows Vista Recovery is a program of analysis and optimization of fake computer that displays false information in order to scare you into believing that there is a problem with your computer. Recovery of Windows Vista is installed via Trojan horses that display fake error messages and warnings of security on the infected computer. These messages will state that there is something wrong with the hard drive of your computer, and then suggests that you download and install a program that can solve the problem. When you click on these alerts, recovery of Windows Vista will be automatically downloaded and installed on your computer.

  As this program is a scam do not be scared by buying the program when you see its alerts.

  read removal steps below to make sure that it is totally deleted

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Vista-recovery

• I created an adobe account and I am currently trying to install creative cloud to be able to try the trial version of photoshop and lightroom, however I can get insofar as the process of checking e-mail and adobe is sending the e-mail to my nephews one em

  I created an adobe account and I am currently trying to install creative cloud in order to try the trial version of photoshop and lightroom, but I can't get insofar as the process of checking e-mail and adobe is sending the e-mail to my email from hotmail to nephews who is not associated with this account.  He used my iMac in November but I only created this adobe account this week.  His e-mail address is not linked to this account anyway... help.  I really need to try out photoshop and lightroom and do not want to buy the monthly where the same problems occurs.  Thanks in advance.

  > He used my iMac in November

  What you need to do is to get him to sign with the cloud on your computer, uninstall and clean all Adobe, then login with your account

  Disconnect the TWO accounts... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to YOUR account... Reinstall

• I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. an error message will appear saying "need help."

  I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. a pop error message saying "we met the following problems Installer failed to initialize. "Please download Adobe Support Advisor to detect the problem" I click on 'Get Adobe Support Advisor' and then I get here. Can you help me? I use the Mac operating system. I also run Adobe Photoshop CS6 unistall and cleaner, but now when I try to install it again it gives the same message

  Hi Ashish,

  Please follow the solution 2 in the link below.

  Error: "unable to install". Creative cloud office

  After that, you can install the application by following the instructions on the link below.

  Download and install Adobe Creative Cloud apps

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Black screen occurs on laptop computer after Microsoft Office Professional Plus uninstall the trial has been interrupted.

  My Compaq Presario F500 uses the Microsoft Vista operating system.  I tried to install the trial version of Microsoft Office Professional Plus 2010.  The installation failed and began to 'undo changes' after that that we discovered the previous versions of the trial had been detected.  During the uninstall or process "cancel changes", I unplugged my laptop.  It was powered by the adapter, no battery.  Now, when I start my computer, it goes to Windows Recovery screen.  Once I selected "Boot mode safe" or any other option, including the BIOS screen, it goes straight to a black screen and stops.  My computer was purchased with Windows Vista preloaded.  Any ideas on what is causing the black screen does not?  My files on this computer has not been saved.  Independent repairers are load and arms and legs.  Y at - it an easy solution to this problem that I was able to help out so that my laptop will boot and go to my Windows screen and normal office?

  Hello

  Method 1:

  I suggest you do a start-up repair and check whether the problem is resolved. Follow the steps mentioned in the article below.

  a. start in the system recovery options. Follow the steps mentioned in the article below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  b. then do a repair on the system and check if you're able to boot the system normally.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  If this does not help then, I suggest do a system restore in recovery environment and check if you are able to start the system normally.

  I suggest you to return the items mentioned below.

  How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

  Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

  My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

  Hello
   
  ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
   
  In order to eliminate that your computer allows you to try these methods.
   
  Method 1:
   
  If it is installed in C:\Program Files, you can uninstall using programs and features.
   
  Do follow the link provided below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2:
   
  Try disabling Services "ArcSoft Connect Daemon" service before you start.
   
  To do that you must follow these steps:
   
  1. click on the Start button.
  2. type services.msc in the search field.
  3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
  Now, restart the computer and check if the problem is resolved.
   
  Method 3:
   
  If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
   
  For this you need to follow the links below.
   
  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301
   
  For cleaning and installation you can go to the link mentioned below:
   
  http://support.Microsoft.com/kb/923100
   
  Add this link to download the Windows install cleanup:
   
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Satellite L670D - issue of recovery on the new HARD drive

  Hi all.

  I actually sent this support Toshiba has a few days ago, but still have received no response and thought I would try this forum.

  That's the problem; the hard drive of my laptop is a failure, I had warnings to create a backup and replace the drive hard as soon as possible. I have done this and have mounted with success the computer with a new brand Hitachi 500 GB hard drive, with no problems.

  Then, I entered the program installation and makes the dvd the first boot drive. The first disc of recovery in the drive and it starts perfectly and started the process. I then went through the recovery procedure with the DVD 3 x on my computer, it seemed to work flawlessly, and after inserting all 3 disks in the order as requested, I was instructed to remove the final support.

  I have reset the boot hard drive and windows started normally until I got to this point. "the installation program starts services. Then comes a pop-up window saying; "windows could not complete the installation, to install windows on installation, this restart of the computer.

  Of course I tried to start in a few other ways to the f8 advanced boot options, but he always does this same thing.

  I can't imagine what the problem is that everything seems to go well until this?

  Hope you can help me solve this problem.
  Thank you
  Malc Fisher

  Hello

  Only thing I would say is that you need to install recovery image again. Please try it out and post comments.
  It will be interesting to know if the same thing will happen again.

• Satellite L305-S5955 - gel of the boot process

  Toshiba Satellite L305-S5955
  Once it froze early in the boot process - until windows starts, indicating (to me) it must be material.

  John

  Hi John,.

  You have already reinstalled Windows with Toshiba Recovery disk (factory settings)?

  If Yes, it could be a hardware problem, otherwise, it looks like a software problem or driver.

• Dangerous change in the approval process for iBooks

  you remember long time for approval of new iBooks users author books that publish their books on the iBook Store since the beginning. Originally, it was WEEKS, sometimes even months to get through the approval process. Fortunately, which improved considerably over time and now it's down to a period of 24 hours. remove your book from the store.

  I have published more than 17 books so far since the beginning of the iBook Store, and certainly, I look forward to this improvement. However, I just found out the hard way that this improvement comes with a terrible price.

  The new procedure:

  Is the approval process faster (not only) not due to more staff to go through the comments. Instead, it is due to an approval procedure has changed as it has been explained to me by the customer support. Now, the examiner spends less time going through the books to get quickly to the store. I don't know the details, but I guess they check the side more art if works and not actually reading it Word by Word.

  With this first less carefully past obviously comes a new stage. The Department for approval now takes books later (perhaps if they have more time or something) and check for any errors and delivers a ticket while your book is already on the iBook Store. In fact, at that time, that is not on the iBook Store more and this is the great potential disaster you should be aware of. If you get a ticket issued, your book get ripped the store until you propose changes and he crossed successfully a new review process, which could take days. It's wrong, really wrong, and he just happened to two of my books.

  Out of the blue, I got a ticket of the iBooks team for my book 'Logic Pro X - how it works', which lies on the line store since 2013 has been updated (and approved) last September. On one page, I had misspelled the name of "iBook" Store instead of "iBooks Store" and on another page, I got a link to the page of my book by asking readers to write a comment Amazon if they like my book. Of course, it was also a no-no (a multi-billionaire company referring to a competitor of billions of dollars with a link).

  I made the changes immediately and has the new version uploaded in an hour. But the review process took over 2 days, after I contacted support and recovery from the case. And here's the reason:

  At the moment they have issued the ticket, my book was not available on the iBook Store more, nothing, not even a mention that it is "temporarily unavailable" like Amazon. The visitors couldn't find the book, all the links from my Web site, twitter, facebook and other sites related, everything was made immediately a dead link. Not only did I lose money, I had to deal with customer e-mails explaining why they could not find the announced book. Last week, it happened with another book when I was in town for a week and had no files with me. And even once, it took 3 days to review the correction that I added 's' to the iBook Store.

  It is mind-boggling that the Team did iBook ' t think that through

  Why not keep the booking online during the update

  Why not give priority to the presentation (check two typos took longer than the initial review of the book).

  I asked the support team to issue feedback on this subject, so they can correct this procedure. In the meantime, you better watch for potential new tickets, or someone had the same problem already?

  HI Edgar,

  It's really good to know. Thank you

  Difficult to have a work around for this.

  (Got a ticket) Right now, I'm waiting for approval,

  After correcting a few minor problems.

  I hope this will get fixed soon.

  I like your idea to keep the original "approved."

  live version, until the update is approved.

  Should be a simple and logical

  changes to the procedure.

  Kind regards... Thomas

• What happened to the recovery of the Options software Dfault factory to win 8.

  We recently bought a C50 - B Satellite laptop for one of our boys to use at school (since they decided that the laptop replaces the need for text books) and needed to be implemented. It will be his only machine and it will also use to play games and surf the net. Past experience with his games, he done always something that slows down the system and finally makes it almost unusable, a State that I can't leave because it is necessary for school. I thought I would dualboot, one system for school only and the other for its games so that if its OS is messed up games he can still do his school work on the other OS.

  Microsoft say that, since the OS will be installed on the same computer twice, but that an installation can be run at any time that it does not violate their license agreement, so no problem with legal issues.

  System recovery, in Win7 under "Recovery of Factory Default Software" has three options.
  1 get out-of-box state.
  2 recover without changing the hard drive partitions.
  3. recover a custom size partition. The memory option 2 or 3 allows a 2nd installation of the operating system even though I think as the BCD needed some changes to both work.

  My problem is that the C50 - B comes with Windows 8.1 and the recovery procedure and options have changed. Win 8 / 8.1 seems not to have option 1, or an equivalent, as it says Win 8 s reset is similar to the recovery of Win7s, but this removes the partitions and the existing operating system, so I can't get two operating systems on the computer by using this method.

  Does anyone know a way to dual boot to help to win 8 / 8.1 recovery partition?
  OR is it possible to modify the script to allow options 2 and 3 of Win7?

  Win 7 was not ideal for this, but the deletion of these two options, it is difficult to use other operating systems such as Ubuntu, Linux etc.

  I would like to see the recovery for the other operating systems partition, do not assume that it will be the only OS that requires the user on the machine.

  Help with this will be appreciated.
  Thank you.

  Windows 7 recovery option is different of options of recovery available in 8 Win / Win 8.1 but of course possible to use a dual boot system (Win 7 / Win 8.1) on a laptop computer.

  Here are a few beautiful /TSB FAQ I found on the Web from Toshiba site on the process recovery running Win 8 / Win 8.1

  How to recover a portable device or Tablet from Toshiba with the HDD recovery procedure
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Windows Recovery 8 & repair
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Steps to install Windows 7 on a unit of Windows 8
  http://APS2.toshiba-tro.de/KB0/TSB2B03EX0002R01.htm

• Satellite A660 - question of recovery of the system and Windows software

  Hi all

  I recently bought a new Toshiba laptop and created a set of disks for backup use Toshiba Recovery media creator.
  Now, this laptop is proved to be defective and was exchanged by another.
  There was a slight difference in the software, what the faulty version was preloaded Office 2010 starter and the new Office 2007 trial 60 busy days.

  As I have already created backup discs of the defective model (i.e. same spec/model number) can just recover the system using the device backup discs?

  The reason why I want to do is that I prefer the Office 2010 Starter version (as opposed to the trial version). Software recovery disks that you create on this computer in particular connected serial number is or can I use them on the new machine to replace the identical specifications?

  Thank you

  Generally you can use it if the two laptops have the same part number (model number PAxxxx).

  Before that, you create an original DVD for the machine, you now have. If something goes wrong, you can use the original disc.

• Recovery of the Satellite A200-TH1

  Because I met a frequent problem with my Satellite A200-TH1 of starting recently, I was told to use the disks of recovery by the seller. When I use it, after the two initial instructions (F12 / enter setup /F9), nothing happened. I chose the CD drive, and then press F9.

  Can someone help me to complete the process to get my computer recovered fully?

  Hello

  Your computer is trying to boot from CD or what exactly is going on?

  Have you tested different bootable disk to check if the recovery disk works properly? You can use a Microsoft Windows disk to test it. If this disc works, your recovery disc is scratched/damaged, otherwise, it might be a problem with your CD/DVD drive.