Recovery of Windows 7 with new HARD drive

Similar Questions

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• How to install Windows without recovery disc - Satellite A660 with new HARD drive

  Hey,.

  Portable 500 GB HDD of my friend Toshiba Satellite A660 seems to have died.
  I tied him to my laptop on a sata dock and runs a data recovery program because nothing has been saved. The recovery takes forever, however, and she really needs his computer to work.

  Because the hard disk may be damaged in any case, I am considering buying a new hard drive and install in the Toshiba.

  How can I do this without a recovery disk, though?
  The old drive was a partition recovery on it, I think, but this seems useless with a new drive.
  Operating system is Windows 7 64 bit home edition.

  The product key is on the bottom of the laptop.
  I live in Turkey and so I don't think there is a Toshiba store is close.
  There are individual computer stores, so I'm confident, I can buy a new internal hard drive (I could find the sata dock here), but he must know what to do to install the software, etc.

  Thank you!
  Chris

  > How can I do this without a recovery disk, though?

  You either have the recovery disk or you are going to install the system using the Microsoft Windows disk.
  The necessary drivers are in internet on Toshiba UE page.

  The recovery disc can also be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• How to transfer windows on a new hard drive

  How can I transfer all my system windows on a new hard drive

  Hello

  There are different ways to do

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought, if you decide in different ways:

  1. If vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new hard drive

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

  _________________________________________________

  and read this on how to back up your data and also make a complete pc backup

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• How to install windows on a new hard drive

  I lost my hard drive and buy a new.  I do not have my disk but have a product code valid for my computer.   How to install windows on a new hard drive

  OT:

  Windows 7 home premium edition

  You will need to borrow a disc of Windows 7 Home Edition Premium or borrow a disk upgrade or full version retail and create a bootable copy with option to select Windows 7 Home Premium during installation. To learn more:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive. He is now not letting me turn it back on.

  original title: activation problem

  -I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive.  He is now not letting me turn it back on.  What should I do?  I don't want my computer or Microsoft thinks I use a version of Windows

  It is Windows 7 Home Premium, and I my here in front of me activation code.  But it is to say that it is not valid.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• HP TouchSmart 420 - 1000 t CTO: need help with the installation of windows on a new hard drive for HP TouchSmart 420-1000 t CTO (bought in 2012)

  My hard drive is failng in my computer I get the message that "the failure of hard drive" is imminent for several months now.  I did just recovery disks after I bought my computer and that you have ordered a new hard drive.

  I thought that the part of the setup of windows on a portion of the current hard disk that I need to replace.

  I want to just make sure that if I can restore the windows completely and that all programmes provided with the computer are on the recovery discs I want to do it myself - so I need to know I'm doing it correctly!

  Thank you very much.

  Kimberly

  PS I found this web page below and I want to just make sure that it applies to me:

  http://support.HP.com/us-en/product/HP-TouchSmart-420-1000-desktop-PC-series/5146292/model/5155758/d...

  This link in the post seems to apply to the situation.  If you have already completed the defined recovery disc then it should just be a matter of running the recovery disc after the new hard drive is installed.  The recovery disk set will be "restoring windows completely and all programs included with the computer".  Be aware that all other items that were installed or personal data will not be restored.  When replacing the hard drive, do not buy a disc exceeds the limit of 2 TB, such as published in the SPECS for TouchSmart 420-1000 t CTO.

• Will be produced recovery disk works with new HARD drive?

  Hi guys,.

  HARD drive failed the other day so replacement is on the right track.

  Always the product recovery disc, it will work on the new hard drive or is mapped to the old cd?

  Thanks in advance!

  Hello

  Of course, the recovery disc will work with the new HARD drive.
  It s not severe as a new HARD drive. The recovery disk it reformatted at first and install the operating system, drivers and tools

  Simply said, you will get the same software as on the first day of purchase.

  See you soon

• Installed Windows on a new hard drive with an old processor, the video controller, there are no drivers

  I have an old optiplex Gx280 dell and she had a damaged hard drive. I didn't need anything out of it so I got a new hard drive from Seagate internal tb and install a new copy of Windows 7 ultimate on it. I have updated all drivers for obtained with the exception of my video controller. Since then, I've used about 200 GB of space on it from the information that I want to keep, but apparently the drivers because this computer does not exist for windows 7. What should I do?

  Standard-Intel915G/915GV/910GL VGA graphics card
  Hardware acceleration is completely upward
  Dirctdraw, Direct 3D is not available

  If you can't find a driver update, you can try installing the driver in compatibility mode ' old'.  Simply right click the Installer do > properties > compatibility mode > choose OS

  Good luck

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• Pavilion p6230y: how to reinstall Windows on a new hard drive

  Hello

  Recently, I had a hard drive failure. The drive is about 7 years so I understand he lived a life busy for a long time, and I plan replace it. Unfortunately, I wasn't able to make the recovery discs and I don't have a windows CD, because it is installed on the disk hard when I bought the computer. If I had to buy a new HARD drive, how would I reinstall Windows on it without re-purchase a copy? I was told there would be a product key on the chasis somewhere but I couldn't find the model and serial number for the bureau, nothing to do with Windows. I also searched HP website to see if I could order recovery disks, but this option is not visible anywhere. Help, please!

  Thank you, Alex.

  Alex, welcome to the forum.

  Unfortunately, because you did not the system recovery media when you bought the computer, you will need to buy a full copy of Windows 7.

  Here's a guide to help you try to order the HP discs.  However, I believe that it is very unlikely that they are always available from your computer is more than 7 years old.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• The drive on my Acer Z5610 is overheating and stop. How can I transfer my Windows 7 on new HARD drive

  Would appreciate help from the members of the Forum.

  The drive on my Acer Z5610 is overheating and stop unexpectedly. I bought a new 1 TB WD HARD drive. I tried loading the Acer recovery CD 3 I initially created in order to load all applications touch etc, but received a message to say that I got at loading Windows. The computer came pre loaded with Windows 7 Home Premium, so I did not all Windows disks. My question is: How can I transfer Windows 7 on my new HARD drive so I can begin to rebuild the PC?

  Hello

  I think that you have created the driver & application backup, if this is the case & * if the old HDD is still detected & boots you could create a factroy restore discs, if not then you might even get to store.acer.com.

• How to recover HP Recovery Manager after replacing a new hard drive

  Recently I have lots of BSOD saying Bad_System_Configuration_Info and I ran a boot hp test and my hard drive failed the short DST test, so I looked online and it says that this means that my hard drive has failed.

  IM planning to buy a new hard drive. I don't have a windows disk to recover my windows 7, so I tried to copy the recovery partition hp from the old drive to the new. I don't know how do it, I wonder if anyone knows. I have no recovery disks and I don't think I can order a so I want to restore my new hard drive without the use of drives and using the my old hard drives at hp Recovery Manager

  I bought the computer to the United States, but I moved to China so im assuming I want to buy a new HARD drive that is not Hp? I don't know if it will work yet cause I hear it must come from a drive HARD hp to work

  Hello

  You can choose the relevant HARD drive of any manufacturer you want, but if you want to re-create the recovery Partition, you need to do a "Factory Reset" with a set of recovery discs - if you don't have these, you will need to order them from HP.

  However, there may well be a workaroud allowing you to reinstall the operating system without having to buy these discs.

  Can you post back with what follows.

  1. the complete model number and the laptop Nr - see here for a guide to the location of such information.

  2 version full of operating system provided with your laptop (that is, Windows 7 Home Premium 64-bit).

  3. can you still read the activation key product of 25 characters on your COA label (don't post back with it, just to confirm if it is still readable) - an example of a COA label can be seen here.

  Kind regards

  DP - K