Recovery USB disk does not

Similar Questions

• Recovery USB disk is not bootable

  Hello

  With HP Recovery Manager, I created a recovery USB disk. FWIW, on a SDHC card that is connected via a USB card reader. Verification of the media after creation of Recovery Manager would have as much success. However, the disc seems to be not not bootable. Another bootable SD card I have (with stock image Windows on them) starts very well through the same USB card reader.

  What I did wrong, and what are my other options?

  P. S.
  By pressing F11 (with attached USB recovery disk) does not work on startup as well: a regular OS from the HARD internal disk boot is started. Although, I don't know if the F11 is supposed to work now - the recovery partition I already deleted, via the Recovery Manager itself.

  Thank you
  Konstantin

  Hello

  I contacted HP Support to request for a media alertnate recovery disk as described in their documentation. Contrary to their claim that they keep the versions of recovery media for this event - I was told that they do not provide these media recovery media.

  So I did the next best thing - downloaded a utility called TestDisk. After review of my USB - it seems that everything is in place (she spends the creation of media after all verification stage). The partition is marked primary and Bootable. However, I suspect that the MBR was not written. What else is there to conclude if the disc does not start - so I used the MBR version provided by TestDisk - and walah - disk can start now.

• Toshiba Recovery - 2nd disk does not work

  Hi all

  I wanted to recover my original Windows I created 2 DVDs when I bought the laptop.
  the first DVD worked OK and erased everything, so he will not read my second DVD although it seems in good condition for me and can be read on other devices.

  is there a way I can recover my original windows?

  I tried pressing 0 at startup but no use.

  Thank you very much

  Hello

  It is a very bad situation now. All you can do is try again. Make the second DVD clean and try again.
  I really hope that it works somehow. If this isn't the case, you have a big problem.

  Before recovery image installation starts any HARD drive will be formatted so there is no chance to start installation of disk recovery HARD from the HARD disk (using 0 at startup).

• Acer Aspire M5 w/Windows 8 - e recovery system disk does not start

  My M5 of Acer one-year-old has failed and now I have a blue screen that says "the Boot Configuration data file is missing some required information, File: \BCD, error code: 0xc000000d.» I ordered an e recovery disk that was supposed to solve the problem. The instructions say "Insert system disk labeled disk," "restart the computer and press F12...» "When I do this, the tracks of the disk of the system for a minute or two, stops, and a minute later the laptop stops. I don't think the system disk is accessible to all. My Acer is two months out of warranty... it's so frustrating. The advice is much appreciated!

  Just an update... Blayn was very helpful and directed me to the Acer support. The problem has been resolved by directing the bios to boot from the hard drive instead of the hard drive. It was a little difficult to achieve... I couldn't have done it without the excellent guidance and support from Acer. My Acer has worked very well since, and I appreciate help in this forum!

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• HP ENVY 17 - 1190nr l 3D: recovery disks does not not for HP Envy 17 - 1190nr

  My main HARD drive died. Toshiba 500 GB MK5056GSY was the 'C' drive factory installed. The laptop also has a "D" drive, which was the same exact brand, model and size.  (secondary HARD disk does not work at all. Long story, but I think it is a driver or a hardware problem with the motherboard)

  I overwhelmed the secondary HDD at the location main, reformatted and reinstalled the operating system with the set of recovery DVD 7, SUCCUSSFULLY disks.  But, since I can't have a second HD to wor, I decided to spend the primary HARD disk capacity, so I installed a Seagate 1 TB HARD drive.  Now, I have reinstalled the operating system using the recovery discs 7 DVD and when the 7th finished disc, a window open warning that says "Recovery manager cannot restore your computer using the original image. "Please contact the HP support (Yes right, it's a joke) error code: 0xe0ef000e.

  I also tried to install the operating system with the recovery of a 240 GB SSD disks. Same question.

  BUT, the original secondary drive allows the operating system recovery 7 DVD image reset goes to work.

  WHY?
  
  Finally, if I install a stand alone Windows 7 OS for the new Seagate 1 TB drive, it works fine.  The problem is that all additional drivers, programs etc. provided with the laptop originally are net, just a light version of Windows 7. The works of the OS, but the wireless, the blueetooth, readers of cards, etc. do not work. And missing a few programs that comes with the original image (some are too expensive to buy when I wouldn't need it again).

  Thanks for any idea on this issue.
  HP makes me very angry today.

  Hi there -@Bob,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your recovery discs do not work on your HP ENVY 17 - 1190nr 3D Edition Notebook PC.

  • What is the model/product of the Seagate 1 TB HARD drive?
  • You can enter the BIOS?
  • Can you see the HARD drive in the BIOS?

  If you can, please:

  • Restore the BIOS
  • Press F9 to change the boot sequence to reflect the new hard drive.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• Creating recovery USB disk

  I'm doing the recovery usb disk and it will not be exceeded the stadium to choose between creating DVD or usb drive.  I use a new usb key.

  Hello

  It may be down to the type of flash player, you have.

  If the flash drive is listed as "Windows compatible 8" may not be used - the reason is that the creation of HP recovery media software is seeking a device marked Win 8 compatible show as internal drives flash drives and external .

  In the example below, the 32 Gb flash drive USB 'Dave G' shows as a drive hard internal who can not be used, while the USB flash drive "Removable disc H" would work.

  

  Kind regards

  DP - K

• Windows 8 How to recover without a recovery USB disk or a disc?

  Hello, about a month ago, I rebooted my computer in windows 8, caused by viruses, and I did it without creating a recovery on a USB drive. Also, I bought the computer from best buy so I have not received a disc of 8 recovery of 64-bit Windows is restarted. Trying to repair and restart, the computer turns on, but head to the blue menu screen and tells me that I am missing the drivers. Is it possible that I can download a recovery on a different computer from windows disk 8 and use it to mine? If this does not work, is there a way to download a recovery on the windows site drive? Thanks I hope you can answer my questions.

  Most computers come with an internal partition on them with the recovery information.  This allows you to go back to "factory fresh" conditions, as a new installation.

  How to go to you it's different on different computers.  My Sony Vaio all-in-one PC that I got from BestBuy last year with Windows 8, has a small pin hole I have to press with a paper clip to enter recovery mode.

  If this does not work (or your computer does not have this option), you will need a recovery disk.  The recovery discs are unique to the computer, so you should get from the manufacturer.

  I helped a friend a few weeks ago and Dell sent him a DVD disc of free recovery, the next day Fed - ex.  But my Sony Vaio here, (which just returned after the internal hard drive field itself of pasta), Sony wanted me to pay 60 million dollars for a CD. I can't use anyway because this computer has no CD drive (then they were told to go buy a lol... but that's another story).

  My recommendation or you is so ask the manufacturer or get with BestBuy.  In my case, because the computer has been less than a year when this Vaio hard drive died, BestBuy geek squad made replacement under warranty on it for me, free.  I had no recovery either by car (although it would not have helped because the internal hard disk was physically dead).

  When I came back today, do you think better :), I created a recovery USB disk

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• Toshiba Recovery Disc Creator does not work on my Satellite P300

  Hello

  I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
  I tried before, and he had a problem with the core files, saying he was corrupt.
  So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
  Cheers for any help
  Mikey

  Hello Mikey

  The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

  If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
  Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

  If you want you can test. Try to start the installation of HARD drive recovery.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support