Rectangles of drawing on paper of printing in LabWindows

Similar Questions

• All-in-one Officejet 5610: computer said paper jam, printer does not respond

  We had a paper jam, which we is allowed. The printer says there is no jammed paper and printed successfully a self-test.  The table of edge devices and printers said that there is a jam paper and attempts to print just to sit in the queue.  Clicked on the HP Solution Center and it says printer is ready. The printer is okay.  Only the OS seems to have a different opinion.

  Not tried them: (1) open the back door and look for debris. (2) open the Feeder and locate debris.  (3) open front (involves opening door cartridge, unplug the printer and remove the trays) and search for debris.  (4) self test printing.  (5) restart the system.  (6) unplug the printer while and leave unplugged for 60 seconds to force the delivery.  (7) repeat steps 1-4.  No SOAP.

  Have you tried what is obvious.  Turn on the computer and the printer off both.  Now, unplug the printer from the computer.  Turn on the computer and then turn the printer back on.  Now reconnect the printer to the computer.  This assumes that the printer is connected to the computer via usb.  Alternatively, you can try to plug the usb cable into a different port.

• Office jet 6500 has HP cannot load the paper to print.

  HP officejet 6500 has failed to load the paper to print. I tried with just a sheet all the way to a full attack, but the machine can pick up a sheet to print. It's fixable?

  I remove the tray paper completely from the printer and make sure that it is not a piece of paper caught in the entry in the printer rollers.

  So, check the steps in the document found here for steps solve problems when a printer won't come from paper.

  I hope this helps.

• no lights after paper jam, printer does not

  no lights after paper jam, printer does not

  John, thank you very much, found that when the paper through the printer offline mode, I put on the line, then reconnected to electricity, and she came back.

• Photosmart C3150: Check paper/Check print cartridge

  I replaced both ink cartridges; However, the "check paper/check print cartridge" lights continue to blink at the same time and there is an 'E' in the box next to "Copies". While the printer is not new, it has barely been used and still in the box. Can someone please advise about other options I could try to solve the problems? Thank you

  In the paper here troubleshooting steps can help solve the lights flashing Photosmart c3150 printer.

• hp6100 keeps ejecting the paper when printing

  HP6100 keeps grabbing and ejecting the paper during printing.

  Although it may not still be interference, the rolls could act up because they are a little dusty.

  Please try this document and let me know if this is useful to all

  http://support.HP.com/us-en/document/c03115694

• My Epson NX125 printer goes through the paper without printing anything

  "What is required of ' Print Preview ' or 'Print' for my printer through the paper without printing anything.  Last few times he has done this, ink levels were low and I have renewed their but now they are all full and it will not print even though she goes through all the motions.

  See the printer manual or here

  http://files.support.Epson.com/PDF/nx125_/nx125_qr.PDF

  on cleaning the ink in the print head nozzles. In your case, the purp [ose of the exercise is to reload the path of ink and the printhead with ink.

  Tom Ferguson

• I would get a single image appears 4 times on a pice of paper to print? How could I go about this?

  I would get a single image appears 4 times on a pice of paper to print? How could I go about this?

  Hi raymondp,

  You can duplicate the layer several times (right/control click on the layer and choose Duplicate Layer) and then move the layers around using move tool you want to that they will organize.

  Kind regards

  Claes

• the paper size, and paper also prints the profile color inkjet

  I intend to use an inkjet printer to print at least one (or more) copies of a drawing of YOUR CONTINUOUS created in Ps CC 2015. I have several questions about the TYPE of DOCUMENT and the ADVANCED OPTIONS:

  
  

  1 Wkind of hat of paper do I need to buy, and should I use one of the presets U.S. PAPER?

  
  

  2. If I don't want to design to BLEED on paper, should I create the design that is smaller than the HEIGHT and WIDTH I choose (e.g. would allow a larger size such as 8.5 x 11 for the margins between the edge of the paper and the design itself)?

  
  

  3. is it true that inkjet printers are usually set to 240 and, therefore, the image of RESOLUTION must not exceed (eg. something higher is too much data for the printer to process in a reasonable period of time and there is no difference in quality anyway)?

  
  

  4. should I work in RGB mode and CONVERT them to CMYK when I finish the design?

  
  

  5 should I use the default PROFILE of COLOR RGB (sRGB IEC61966-2, 1), Adobe RGB (1998), the "color management this document" option, or some other?

  You'll want to experiment with the printer.  Save copies of the file in separate RGB profiles as I explained in my post.  You will be surprised on the different color prints, you will be able to achieve.  As you work in a workspace 'closed circuit', you can print RGB strictly.  This will allow a wider range through the barrel.  Certainly use color management in the print driver.  For what is the resolution of the image, use the 140 to 150 pixels per inch.  No interest to enter in the halftone screening technology platform.  Suffice it to say, 300 pixels per inch is unnecessary and too much data for inkjet.

• Photosmart 7510: Errors of inconsistency of paper photosmart printer 7510

  I am trying to print my 7510 by using custom paper sizes and get paper mismatch errors.  I use Word for Mac v. 14.4.8 on a Mac under OS X 10.10.2.  I went through all the tips in the HP support pages to try to fix this problem without success.  There is no firmware upgrades or updates of available driver I can find support/HP.  This error is more annoying.  I have not had this problem on my old printers I've foolishly got rid of upgrade to the all-in-one printer. Can you give me any help other than suggests to use the information on the support pages that did not work.  ! have created various paper formats customized in word to see if I could find a magical Assembly which will print and have had no success.  If someone cannot help me solve this problem, it will be the last HP printer that I buy.

  Full of hope for some real help.

  Hey @oldgt!

  Thanks for getting back to me!

  If you see only the media and the quality in the dialog box print, then that indicates that you are using the Apple Airprint drivers and not the pilot series Photosmart 7510.  If the printer does not have the correct drivers, it may not work properly from third-party programs such as Microsoft Word or Adobe Reader.

  To remove and re-add the printer using its drivers:

  1. Click on the apple icon in the upper left corner of the Mac
  2. Click on System Preferences
  3. Click on printers and Scanners
  4. Select the printer and press the minus (-) signs below the list of printers
  5. After removing the printer, click the plus (+) sign below the list of printers
  6. Click "add another printer or a Scanner.
  7. In the add a printer window, select your printer
  8. In the drop-down list 'USE' make sure you only select the series Photosmart 7510 and NOT Airprint
  9. Add the printer and try to print again

  

  

  If please, after back and let me know if this worked for you!

• Excel gives only the Photo paper as print option

  I just switched to a Mac and most of my documents have been moved from my old computer, but the problem also occurs with new documents generated on the Mac: the only book listed as an option to print in Excel is HP Premium Photo paper.  Plain paper or normal paper is gray and cannot be selected.  It takes forever to print a single page, even if you have the option to set printing and plain paper, quick project as default for the printer.

  How can I get rid of Photo paper or at least be allowed to choose the other qualities of paper?

  My printer is a HP Officejet all-in - One Pro L7680.

  Hello

  Just a quick thought, check the paper size is set to letter and not "without borders".  Also, in the change of Print & Fax settings to account for this printer is not "last use"

  Thank you...

• Photo paper jams printing

  I use a HP Photosmart C5140 all-in-one printer and have had zero problems with it since purchase 6 years, but today I was printing to 4 x 6, three prints photos and then the paper began to jam.  I did all the things normal, firm, re - align, choose photo paper, stack the book perfectly, I think that I did everything possible, but the ongoing book to get stuck at the back as it rolls around the roller printing.  Any thoughts on what could happen?

  Thank you for having responded to my call for help!  I think that the cleaning of the rollers made the difference. Thank you.

• HP Photosmart C309A wrong size paper to print wireless from Mac OS 10.7.5

  We connected our HP Photosmart C309A AllinOne printer on a wireless network to our Mac computer running Mac OS 10.7.5. Almost whenever we try to print from any propgram he respnds with the following error message:

  Paper size error: paper selected in the printer driver does not match the paper size in the printer input tray.

  I have reset the size of the paper to the printer to letter 8.5 x 11, updated all the software of the computer and checked all the preferences.

  What should I do next?  The printer worked fine with 10.6.

  Thanks for your suggestions.  We are VERY frustrated.

  Hi amwsin,

  I suggest to reset the printing of your Mac system. Then readd the printer printing & scanning and test again to print.

  This documents contains steps to reset the printing system: Macintosh: reset the system of printing from Mac OS X

  It will be useful.

   

• maximum weight of the paper for printer F4480

  Sometimes I would like to print on thicker paper, such as 67 books.  My F4480 printer will handle this without causing problems?

  Hello

  Here is the list of supported documents:

  Paper weight
  Plain paper: 75 to 90 g/m² (20 to 24 lb)
  Envelopes: 75 to 90 g/m² (20 to 24 lb)
  Cards: Up to 200 g/m² (110 - lb index maximum)
  Photo paper: Up to 280 g/m² (75 lb)

  Kind regards.

• DeskJet f335 all-in-one: deskjet f335 all-in-one, says no paper but prints a sheet of test without problem

  DeskJet f335 all-in-one does not recognize that there is paper in it.  Prints a page of test very well.  Will not print a document.

  So far, I disconnected and detached, has released the ink cartridges, expected 5 minutes, then restarted the computer, plugged into the printer and attached the usb between the 2.

  The message on the screen of the computer has changed to "error: no more paper" to "on paper."  Otherwise, no change.

  Any suggestions?  I think there is a secret combination of buttons to push, which will operate - as pressing undo while pressing the color printing prints a self-test.  Anyone know the secret?

  Hello @eac510!

  Thanks for posting on the HP Forums!

  I see that your computer displays the printer's paper when you print a document.  You also mentioned that the printer is successful when you make a report self-test.  If the printer is able to print a self-test report then the material works correctly and you are probably looking to a software problem.  Unfortunately there is no combination of buttons on the printer to solve this problem.

  The first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup

  To download the HP software, click here: HP Deskjet full feature software and drivers

  Please post back and let me know if this worked for you.