the paper size, and paper also prints the profile color inkjet

Similar Questions

• HP 4520: Eprint and all in a print module won't let me pick the paper size I want to print 5 x 7

  EPrint and all in a print module doesn't let me choose 5 x 7.

  Hello

  Are you referring to the eprint & all in one apps for android?

  Please make sure you have the right selected and that all other paper size and paper type settings are correct.

  Another option is to download the plugin from HP for android (you must also enable it in Settings download afte) and try to print that way. Once downloaded and activated, you should have the ability to print photos directly without going through the applications.

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Officejet 6500 Paper Out status on the computer but the paper loaded and test page prints

  We have a HP 6500 CB815A, which works well for almost a year. As of today, we get "Paper Out" status on the computer, but there is paper loaded in the tray... the same high quality paper as we always use. The test printer utility reports the same status. However, the printer can print a test page and fax without printing problem status.

  I unplugged for 30 seconds to reset, but we get the same status.

  Someone has had this same problem and solved?

  Thank you

  Dave

  If you have not tried to reboot your PC, I would. If this does not clear the issue, I would follow the following steps:

  1. Click Start-> Control Panel
  2. Select uninstall a program (it's the heading programs)
  3. Find your driver HP software; Select it by clicking on it once, then select Edit. If the change is not available, select uninstall/change.
  4. Select repair and then follow the prompts for your software repairs itself.
  5. If your software does not have the repair option, it may be advisable to download the latest drivers from support.hp.com site. Uninstall the drivers for your printer, and then reinstall them using.

  If these steps do not work, please post and I can continue further with troubleshooting.

  Good luck

  Brent

• How can I add paper to the profile sizes 'print' in Illustrator App?

  Hello, when I searched for "new document profiles" - folder, I found only .ai - of the files to a volume. But there are a few sizes, for example in the profile 'print '. Where can I find the file to add custom paper sizes? Thanks for the help.

  You cannot add sizes to this menu. It is dug somewhere in the code of the Illustrator.

• Office jet 6500 has HP cannot load the paper to print.

  HP officejet 6500 has failed to load the paper to print. I tried with just a sheet all the way to a full attack, but the machine can pick up a sheet to print. It's fixable?

  I remove the tray paper completely from the printer and make sure that it is not a piece of paper caught in the entry in the printer rollers.

  So, check the steps in the document found here for steps solve problems when a printer won't come from paper.

  I hope this helps.

• What damage would result of the use of inkjet paper in a laser printer

  The subject says everything really. If you accidentally use glossy inkjet photo color laserjet, it would harm the printer?

  If this would be how it would hurt it? This replacement parts would be needed.

  Conversely if the paper shining laser for example HP Paper Photo Professional 200 is used in inkjet, it will damage the ink jet printer?

  Thanks in advance,

  Steve

  Glossy paper using ink jet lying in a laserjet damage the laser printer certainly because coated inkjet paper is not designed to handle the high printing laser, especially the roll of oven temperatures.  In a bad case (maybe worse?) coating would be falling apart on the roller, causing damage to the roll and requiring a repair.

  With the help of photo paper designed for laser printing to an ink jet printer should not cause damage, but the results are likely to be poor, lose the impression.

• Office has increased in size and the print size is almost double.

  Original title: Hi, my office decided to increase in size - how to decrease (printing is almost double than it should be).  Thank you.

  Printing has suddenly increased - how I reduce to normal size please?  Thank you.

  Hi GlenisRhodes,

  1. What is the brand and model of the printer?

  2. This occurs when you try to print from a specific program?

  3. when the problem started?

  4. did you of recent changes to the computer?

  You can try to change the resolution of the screen and check.

  Change the screen resolution

  You can also try to print a test page and check.

  Print a test page

  Hope this information is useful.

• HP M4555, mailbox 3 bins stapling (CE736A) - does not sort the paper during printing of z/os.

  Hello

  Shortly:

  Printing from z/os on HP MFP with stapling Mailobx joint - does not sort the paper. All the paper goes to an output tray, instead of outputb different locations, depending on the configuration of the printer settings.

  With more details:

  1 device (HP LaserJet Enterprise M4555fskm MFP printers):

  2 mailbox HP stapling 3 bins of 900 sheets (CE736A)

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA3-2888EEE.PDF

  Our Organization has Mainframe, where the documents are printed (ESF printing system, language PCL).

  We have 3 print queues in Windows print - P1, P2, P3 server. All 3 have the common TCP port - at the end, there is multifunction print device: HP M4555, where we tied - sorter of stapling to the 3 bins 900 leaves HP (CE736A) and configured in this way:

  1 P1 queue prints to: upper left bin.

  2 P2 queue prints to: average left bin.

  2 P3 queue prints to: lower left bin.

  When I print the test page from windows server to P1, P2 and P3 - ir printed paper properly in appropriate output tray. But my problem is that these print jobs, coming from the Mainframe to these queues - are not sorted by bin (P1 to P2 - in the Middle, P3, Upper - Lower) - the paper goes to a location, for example - Upper (or if not configured device in Control Panel mode mailbox - Lower).

  I have fought with this problem too long and cannot be resolved.

  Driver, that is used:

  HP LaserJet M4555 MFP PCL 6.

  P2/properties/Device Settings:

  Accessory output bin: HP 3 stapler/stacker - Mailbox Mode:

  

  Output:

  

  I already tried to change the settings to:

  1 Windows print queue server settings;

  2. from the device settings (side of built-in web server);

  3. the side HP jet admin web.

  Nothing happens. For me it is too difficult, which is priority 1, 2. or 3. option, see above?

  Location:

  

  Impatience on your part.

  Andrejs Sobolevs

  Service Desk COMPUTER team

  This problem has been resolved the side Mainframe, VPS printing system. Administrator has made the installation program there. There is no need to do it on the side of the unit.

  Solved.

• hp6100 keeps ejecting the paper when printing

  HP6100 keeps grabbing and ejecting the paper during printing.

  Although it may not still be interference, the rolls could act up because they are a little dusty.

  Please try this document and let me know if this is useful to all

  http://support.HP.com/us-en/document/c03115694

• My Epson NX125 printer goes through the paper without printing anything

  "What is required of ' Print Preview ' or 'Print' for my printer through the paper without printing anything.  Last few times he has done this, ink levels were low and I have renewed their but now they are all full and it will not print even though she goes through all the motions.

  See the printer manual or here

  http://files.support.Epson.com/PDF/nx125_/nx125_qr.PDF

  on cleaning the ink in the print head nozzles. In your case, the purp [ose of the exercise is to reload the path of ink and the printhead with ink.

  Tom Ferguson

• Printer settings do not match the settings of document. Page orientation and size settings do not match the page size and settings in your document.

  I have updated from Windows 95 to Windows XP Home Edition, after that my hard drive crashed on my old computer. I had a rarely used, but more recent computer wiped and had XP reloaded with works for Windows 95.  Whenever I have print in Microsoft Works 4.5 of the window, I get the 'documents and settings of the printer do not match. Size and orientation of the page for your printer do not match the settings in your document and the size of the page.  Looks like there will be a simple way to solve his problem. Please notify. I am able to print. But after 3 weeks of this message, I final received a fatal error of Microsoft works just after printing. I think it came from this problem. Not sure. I'm not a technical person. Please note the computer I'm talking doesn't only do not have access to the internet.

  You have posted to a group of win7, but seem to be using Windows XP

  There is an article about this err, usually caused by the used printer, especially Epson printers drivers

• Trying to increase the size and a printing of tiles.

  Hello

  I have a file with the work plan in 8 "high by 36" wide. It's 1/10th the final size (its going to be a huge mural where 1 "= 1'). In any case, to get an idea of what the text will look like when printed full size, I've been printing out parts of the file to be 1000% increased scale and tile and glue the papers together. It worked perfectly until I saved the file in PDF format (to the size of the artboard of 8 "x 36"). Now, when I load my file HAVE original and try to scale, of tiles and print... I can't. The TILE option is completely grayed out, unselectable.

  Someone knows why this happens? I closed and reloaded IT and I'm working on a Mac.

  Thank you

  Chris

  You are on CS4 and your document has several plans work? If that's the case then select ignore the work plans of the print dialog box

• I want to restore the size of normal printing for everything on my computer. I tried using the page (text size) and it did nothing, can you help me?

  text size problem

  I'm not sure what means 'normal' - I assume that means you had recently but has changed.  Do a system restore to a point at the time the text was the right size and format you want - BEFORE it changed to what you don't want.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days worth of restore points.  If this does not work at first, try a previous restore point or two.  NOTE: You will need to re - install any software or updates installed between now and the point of restoration - but you can make updates through Windows Update.

  As an alternative, you can go to start / Control Panel / customization / display settings / and set the resolution to a different setting.  Click on apply, and it will ask you if you really want to change based on what you see now.  Click on your answer and either output or try another setting.  It is a more difficult way to do a system restore because it is difficult to choose the same size you had before.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• How to change the orientation of the page of a file pdf size and margins of page? Are there tools available to do this?

  We're converting Lotus Notes documents in PDF format by exporting (printing) to PDF using a PDF writer but found that some contents are truncated or cropped. Must manually reprint in pdf format using a different page/paper settings in order to capture the content correctly. Are there other methods or tools that can automate this step? Would it not possible to change the PDF properties to adjust the size of the page, etc.?

  Hope that there are some useful tools available as there are thousands of documents that have this problem. Thank you.

  Page size options are limited, but are in the crop tool. If there are no tags or other markup, you can also print to a new PDF and adjust the size of the printer - sometimes the simplest interface, but normally not recommended. The rotation can be made in the menu document and then saved. The rotation, which is usually on the toolbar are only for the current view and does not record with the PDF file. Many of them you can use a batch process to solve (in AA8 which is under the advanced > Document Processing). The best method is to set up your printer Adobe PDF to create the correct page size and orientation to the future. You can configure to develop in general for the installation, select a paper size, and have set parameters for auto-rotation. The latest is based on the text that is on the page. The elimination of the margin is also part of the crop tool. I hope that gives you at least a few things to look at. Unfortunately, tools moving with each version, so you have to get the tools.