Red light battery

Similar Questions

• HP Z620 workstation: HP Z620 Workstation - WS displays video & Fans Spin loudly or fails - red light with 8 beeps

  Hello
  
  I have a HP Z620 workstation.

  My processor is an Intel Xeon E5-2660 SR0KK 2.2 GHZ 20 MB 8 GT/s LGA 2011 8 - Core CPU.  More correctly, it's a category of Xeon E5-26xx (dual processor), 8 cores, frequency 2.2 GHz, turbo 5/5/6/6/7/7/8/8, 8 × 256 KB L3 cache 20 MB L2 cache, 95 W TDP, Socket LGA 2011, i/o bus 2 × 8.0 GT/s QPI, × 4 memory DDR3-1600, release date 6 March 2012, CM8062107184801 part number.  This is version 1, not version 2, which is good because the card in my system startup block date 20/12/2011.

  I am using Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Server Memory.   (J'ai également essayer écarter un problème de mémoire utilisé FUREUR de Kingston HyperX 8 GB Kit (2x4Go) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8)) as well as herself, to see if that makes a difference.)

  I don't know how to identify my system board other than the one she reads only numbers as "FMB-1102" and "PBLNV0GCY4N0TF" and "such as #618264-001 REV 0 G'.  He has "hp (copyright symbol) 2012 ' and"E93839"and"FXN1"written on it as well.  (After some searching I guess it's card mother 618264-001.  Which differ a card system like 619559-001 - a model later?)
  
  My graphics card is a XFX R7 240 780 MHz 4 GB DDR3 HDMI DVI VGA graphics card.  (I also try out a video card problem used an EVGA Nvidia GeForce GT 620 1 GB DDR3 SDRAM PCI Express 2.0 x 16 video card to see if it would make a difference.)
  
  Regarding the power supply, the power supply standard HP Z620 computer PC 800W Power Supply S10-800P1A 623194-002 717019-001.  (I have more than one and who have tried also.)

  With respect to the hard drive, I have formatted and reused a WD Blue 500 GB Desktop hard drive - 7200 RPM SATA 6 Gb / s, 16 MB Cache 3.5 inches - WD5000AAKX.

  My problem:

  1 regardless of what video card I use, if I use the FURY of Kingston HyperX 8 GB Kit (2x4gb) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8) memory and starts, I get a blue light, no beeps, no code of message I can say.  However, no tension of the video card (fans not spin) and no power is supplied to the drive hard (do not load and run).  I get a blank screen and can see nothing.  Back fans begin to turn in very strong and turbo mode.

  2 regardless of what video card I use, if I use the Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Memory Server, I get a red light and eight beeps which means a kind of ROM BIOS/CMOS-problem problem problem.  To this end, I tried pressing the button Clear CMOS without result.  I removed the CMOS battery for a sufficient period of time and again.  Nothing changes this situation.  It only happens when I put this special memory in the computer.  If I stick a USB Thumb Drive with file BIOS (BIN) in it which is 3. XX or higher, it will boot to the BIOS on a limited basis.  I also had to understand that I couldn't do anything with a USB keyboard, I could only select options using a PS/2 keyboard - maybe it crashes on some USB devices at this point?

  3. I understand that if I let the rider of recovery from crisis on the 2nd and 3rd pins rather than pins 1 and 2, that it will load from a backup and I can actually do things.   On this basis, I was able to install Windows 10 education 64-bit and a host of programs and otherwise, use the computer normally.  But I can't start unless I have keep that crisis rider of recovery set to pins 2 and 3 and so he can start in the operating system normally by pressing F1.

  4. I while on Windows, updated the BIOS to the latest version, HP Z420/Z620 Workstations system BIOS 3.90 Rev.A (August 8, 2016) using sp77058.exe (19 MB).  I've also updated other drivers as I could with the HP SoftPaq Download Manager (SDM).  None of this changes the problem at initial boot upward.  At the start he complains front chassis fan does not turn, but this is not a problem I have printing allows to stop a boot to the top, it would give just a warning and still boot normally.

  Well my computer works and does that as long as I keep this crisis recovery jumper on.  But I feel that I should be able to solve the problem and he can begin without interference and without resorting to a measure as drastic.  Suggestions anyone?

  Thanks in advance for your time.

  MR. J.

  Juggerknight,

  Keep the rider of recovery of block starting on pins 2 and 3 of E15.  It's 'off' because the 3 pin is not connected.  Put the jumper to pins 2 to 3 "parks" the rider.  Put the jumper on pins 1-2 active boot block recovery mode, and the system does not start with the jumper in this position 'on '.  (You have already discovered this)

  In addition, do not mix unbuffered and registered in the same system memory.  Use either one or the other.

• Strange red light

  For the last two days, I had a strange red light at the top of my phone. This is not notification of light, I even left my phone down to 5% battery to ensure. This seems to be one of the sensors to the right of the speaker. I tried voltage, battery pulls and hides same wipes. No matter what I do I keep turning right when done reboot. my phone is currently in charge of 80% and its still on. If I lock the screen, unlock the screen and its still on. Ive gave these details to help with troubleshooting. If anyone has any ideas on what this might be or how to fix this problem, please let me know.

  The red light (proximity sensor) can also be triggered if you have detection of faces on or if you have any application this movement reqiures in front of your phone. For example, the 'Waze' application uses "Swip hand on screen" feature and sound always on when I have this application running.

• UCS B service health profile: inoperable and my front-end server of red lights.

  Hi all

  UCS B service health profile: inoperable and my front-end server of red lights.

  Description: health: inoperable

  ID; 225695

  type equipment

  cause: equipment inoperable

  Code: F0317

  I do this, the major is not OK. but the server is good work

  fltComputePhysicalInoperable

  Error code: F0317

  Message

  Server [id] (see service profile: [assignedToDn]) health: [operation] Server [chassisId] / [slotId] (see service profile: [assignedToDn]) health: [operation]

  Explanation

  This error occurs generally when the server has encountered an error diagnostic.

  Recommended action

  If you see this error, perform the following actions:

  Step 1 If the error occurs in the Cisco UCS Manager GUI, capture one or more screenshots of the error message and to other related areas.

  Step 2 Check the results of the POST to the server. In Cisco UCS Manager GUI, you can access the general tab for the server POST results. Cisco UCS Manager CLI, you can access the POST results via the post command show under the scope of the server.

  Step 3 Though theserver.

  Step 4 If the actions above has not resolved the problem, run the command of technical support see the and contact Cisco Technical Support.

  fault doct

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/TS/faults/reference/UCS_SEMs.html

  What theis question?

  Hello

  Please open a TAC SR to get replaced for server 1/1 CMOS battery. After that you replace, alerts inoperable see service profile would also get cleared out.

  Padma

• Blackberry Curve 8520 Smartphones BlackBerry turns on, no red light

  Hi guys, yesterday evening I took my SIM card and put a new back in my phone (replacing a defective) and when I went to back based on what I have got a red light solid for 2 minutes then nothing else.

  I watched it on here and saw a response on "Raise" (2 hours plugged, remove the battery for the refit of 15 minutes and leave for another 2 hours) but no, it does not work, tried to change the batteries, nothing also tried to plug into the PC using the desktop software and nothing comes up to be there  :'(AIDER!)

  Thanks for your Post... !!

  Hope USB cable you are using is correct... !!

  Please get that he checked the nearest Blackberry to a qualified service center, because it seems that material related question...!

• BlackBerry Blackberry Storm Smartphones - does not light (red light)

  Hi all

  Recently, I dug my Blackberry Storm out of his box and tried to use it again. Unfortunately, it not light.

  I can plug it into my computer (Mac) and the red light comes on. He will stay on until I open the Blackberry Desktop Manager how the phone starts a cycle of rebooting. Every now and then it stops on a symbol of the battery with a slash through it (are there no battery in the phone), but the second, I try to connect to it via the Blackberry software it restarts again.

  I tried the JML encoder or whatever his program called and every time it tries to connect to the phone, the phone restarts.

  This is as far as I know:

  Carrier: Verizon

  Phone: Blackberry Storm (to 2008)

  Computer: Mac

  Program: Blackberry Desktop Software 2.4.0 (Build 17)

  My phone is out of warranty and since he began to send me in trouble in 2009 I switched to Android. I've never had a problem with Android, so I forgot to go back and see what was wrong with my Blackberry. I hope someone can help out me. I can't really 'take to verizon' because their solution is swap out today just for a working one, but since it's out of contract. / warranty, they will tell you simply throw me. I live in Los Angeles, perhaps someone someone actually knows phones Blackberry of PATCHES. I know it's a new idea.

  Thanks, I hope someone can help!

  In your situation, a 507 is actually a good thing... 507 means that the BB has no OS installed in it, but at least it turn on now.

  I don't know how do to recover it through MAC... all of the stuff I know applies to the PC. You might find some MAC-specific help in our MAC-specific forum:

  • supportforums.BlackBerry.com/T5/Desktop-Software-for-Mac/BD-p/blackberryformac

  Everything what I've heard, none of the stuff to get over this is for MAC, so if you have access to a Windows PC, you can perform the following procedure, which removes as "automatic" search/download OS that fails on your MAC and replace it with what you control:

  1) uninstall all the BB OS packages from your PC,

  (2) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/apps-software/desktop/?lid=us:BBsoftwareesktopSoftware & Cal = us: bbsoftware

  (3) download and install to your PC, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  4) remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• Turned on, the red light flashes twice used to blackBerry Bold 9700 Smartphones

  Hi all

  Last night during the use of my bb bold 9700, it comes went away, came back and then my bbm (messenger) has been removed, so I tried the update of the OS which proved a failure, unplug my bb from my cell phone minutes later, it exploded and the red light blinking twice, charge all night and symptoms persist. can someone help me please.

  Thank you

  Remove the battery and leave it out for about 2mins. Insert the battery and see if works. If this does not work, you can try the update of the new OS but this time with the battery. When the process gets to "Loading Applications" insert the battery and let it go through to the end.

  I hope that you have a previous backup, you won't be able to recover your data

• Screen blackBerry Smartphones Black, red light flashing

  I was downloading an application when a screen message told me to reboot to continue the installation. I pressed the Off button, but now, despite pressure on the Start button, the phone will not come alive, even if she was recently charged. There is just a black screen and the little red light flashes from time to time.

  Hi HarryTyrrell

  Welcome to the BlackBerry Support Community Forums

  By pressing the button Off is not the correct way to restart our BlackBerry device, please perform a battery pull reboot as this device while is powered on remove waiting battery for a min. and then reinsert it wait until the device take a long restart. See if that helps.

  If this isn't the case, then try to start your machine in Safe Mode and in Safe Mode uninstall your downloaded recently or that you think is responsible for this.

  KB17877 How to start a smartphone BlackBerry in Safe Mode  

   

  Try it and tell us.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• BlackBerry smartphones after 3 days my flashlight died - red light shows but does not illuminate.

  I got my flame long enough to set up my e-mail account and run the battery down (about 3 days). I put the phone to charge for the second time and were not able to next turn to the since then.

  I use AT & T and have the Torch 9850.

  I received Dec 25 and not really turn on or start together until Dec 28 and used 28 Dec - Dec 30 when he ran down on battery and close.  I've loaded and charged and charged and I see the red light at the top right, but nothing happens. New years BB Bold 2012 ads just rubbed salt into my new year!

  Any suggestions on how to get this restart or do I have a lemon for Christmas?

  1. remove the battery

  2 - Set your phone on the charger with the battery removed

  3 reinsert the battery

  bottom white-4 with a clock as the picture shows (not a problem)... after a while, that he will be gone and you can reuse your blackberry

  5 - let it get completely reloaded

  hope that it works because my friend had the same problem after that the battery has been completely drained!

• BlackBerry Smartphones my BB Curve turns on; the red light blinks

  My bb 8330 curve will not turn on, charge or do anything other than flash the red light to me. I tried removing the battery and tried to reload, but nothing seems to help. Any ideas?

  Nevermind, I solved the problem by removing my memory card.

• Smartphones blackBerry BLACKBERRY DO if ON - SOLID RED LIGHT - HELP!

  About 2 days ago my blackberry had a dead battery until I fell asleep and I thought that I would let load until the morning (because my charger to wall button/doesn't work properly). When I woke up the battery had drained completely, because my charger did not work properly, I decided to charge via USB on my PS3. After leaving it loads for an hour, I checked it and it had not yet charged 1 bar? I had to leave to go out so I took it out and while that use it empty battery again once. Now, I tried to load it via computer and a solid red light appeared stuck.

  I then tried another battery friends in my phone and realized it was working, so I thought to buy a new battery would solve the problem.

  I then went to buy a new battery for an asain man (an unofficial) downtown, went home loaded on my ps3 and have full battery and it was working fine, then suddenly in the night the battery started to drain very quickly, when he arrived at the yellow on battery, he went to a white screen off and empty. tried to load again on my ps3 and it showed the solid red light and does not turn on...

  Help?

  The original is the best to use because it lasts longer than the Chinese even if the price of an original is too high. As for the charging via USB, that there is no problem, mine I load via USB to the office and use the wall home charger.

• Smartphones blackBerry 8320 death with a flashing red light

  I had my 8320 for 5 months now... everything was fine until today.  I got a white screen with a hourglass... so I removed the battery and put it again after 30 seconds.  Then 'bam' nothing... no screen at all... just a flashing red light.  I came home and plugged in the charger, thinking that would solve it. Maybe the battery was dead, but he charged for six hours and then I got a green light, but no screen.  Help!

  Hi and welcome to the forums!

  If you have only had the phone for 5 months, you should be able to take back and get a new phone.

  I hope you made a backup and you can restore your data. If you are unable to return it, you will need to reload the operating system of the device.

  In my opinion if it can you should resume.

  You want to try to return or to load the operating system?

  Please let me know.

  Thank you

• BlackBerry 8900 smartphones will be no more power up and a red light blinks!

  I have a new 8900 and put in place all OK.  It now will not power and all I have is the red light flashes intermittently. Have tried removing the battery but no joy.

  Someone at - it ideas please?

  If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life.  Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• BlackBerry smartphone red light flashing

  Hi, every so often, I hear a notification tone on my phone and the red light blinks, I check my sms, mms, email and there is no new messages. The only way I can get the light constantly flashing is a battery pull. Someone might know what causes this, and why I have to remove the battery to get the light to stop flashing?, any suggestions are greatly appreciated. Thanks in advance.

  I think I know why this is happening now. (not for sure tho) It possible mast than when someone sends me a message on Facebook, or responding to any of my messages.

• Smartphones blackBerry phone lights. the red light.

  So my blackberry was fine when I went to sleep. woke up and it was off a reason any. I tried to turn it on and it wouldn't. I removed the battery, it reintroduced after a bit and the solid red light came. After a while he went off... then nothing... nothing on the screen.

  HOW SHOULD I DO?

  Before you do anything else, do the following:

  Leave the appliance to charge 2-3 hours and then, still connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

  If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.