Red screen + with driver_irql_not_less_or_equal blue screen

Hello

From may, I get crashes on my computer. The first significant accident was when I was playing a game of Warframe where I got a red screen in which nothing is present in addition to the entire screen being red and my computer restarts automatically. I thought it was a face game question so I reinstalled the game and have not so far received a red screen. I received two red screens and between the two red screens, I got a blue screen (I never got before).

After I reinstalled the game, I had no crashes, pilot at all, not red or blue screens screens. After two weeks, I get another blue screen with error driver_irql_not_less_or_equal. I have not changed a lot on my computer in the past months, so I don't know why it happens.

What can I do to fix this error? If any other information is needed, I'll do my best to provide.

Thank you

Corey Chen

Hi Corey,.

Results verified by WinDBG. DumpCHK and BlueScreenView.

The Bug_Check were USBXHCI CAUSE D1. SYS which is the driver of USB 3.0 and a game controller
Windows which means something other than the conduit in error.

BugCheck D1, {18, 2, 0, fffff8800683e73e}

Probably caused by: USBXHCI. SYS (USBXHCI! TransferRing_StagingDataFind + 36)

Very often, it is a combination of software and hardware even that creates instability in the system
and that's the case here.

1. check with ASRock Support, their drivers and documentation online and ask in their forums
on known problems. Update the BIOS, chipset of low-level driversand on-board major
and drivers of different devices (see previous message above for driver update methods). Do not forget
to search for the updated drivers for all USB devices.

BiosVersion = P1.00
BiosReleaseDate = 17/10/2012<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset ="" and="" the="">
device embedded and separate drivers.
BaseBoardManufacturer = ASRock
BaseBoardProduct = 970 Extreme3 R2.0

ASRock - Support
http://www.ASRock.com/support/index.asp

ASRock - Forums
http://www.ASRock.com/support/forum.asp

ASRock - downloads
http://www.ASRock.com/support/download.asp

2 check any USB 3.0 device you installed. Remove to see if the problem persists and
Try them in ports USB 2.0 as a test. Check with the support of their Creator for known problems.

3 use ALL other methods in the previously posted answer above.

4. AFTER all the above (especially updates BIOS, chipset and driver) if the problem persists
Run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier methods during the previous
answer above - updates and other methods it is first, or it will find that the same
info).

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

    When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

    This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

    Russ

  • My laptop stops with a blue screen

    Hello
    I'm french.

    My computer randomly with a blue screen stop.
    The error is BCCode: 3B

    It reboot.

    Hello

    Can you give us more details please?
    What laptop you have exactly? What operating system you are using? Have you already searched here in the forum to find answers?
    What is the exact code of BSOD?

    I think that without this information, we can t help you but generally it of still worth a try to reinstall Windows with Toshiba recovery disc. ;)

  • Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

    Hello world

    I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

    It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

    Can someone give me advice? Thanks in advance

    Klaas

    Hi Klaas,

    It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

    To disable the auto restart: -.

    1. right click on 'My computer' icon and then click on "Properties".
    2. click on the "Advanced" tab
    3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
    4 uncheck 'automatically restart '.

    Please post again all the details of the blue screen error message.

    concerning

  • Re: L635 - 10 p - stuck with the blue screen and system repair

    I'm stuck with black repair screen of windows startup with the able to move mouse cursor. The normal windows startup ends with a blue screen:
    "unmountable boot volume".

    Unfortunately, there is no recovery disk. hope someone can help me here,

    1. how to operate again?

    2. How can I get the files in the desktop?

    Jin

    > I'm stuck with black repair screen of windows startup with the able to move mouse cursor.
    > Normal windows startup ends with a blue screen:
    > "unmountable boot volume".

    How did you start problem start? I mean if you have installed any driver or application or smth like that... In your place, I would like to reinstall Os than to try to fix it.

    > How can I get the files in the desktop?

    If you have important files smth on your hard drive, you can use Windows live cd to move them to a usb drive.
    By the way, have you tried to enter safe mode?

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • Computer stops with a blue screen with error fatal when the iPhone is connected

    I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

    First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

    My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

    I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

    Thank you.

    Hi 1980ckc,

    1. have you tried to connect the iPhone to a different USB port?

    You can check out the apple support link and check if it hleps:

    iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

    http://support.Apple.com/kb/TS1502

    Also check out the apple discussion link:

    http://discussions.Apple.com/message.jspa?MessageID=10339681

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I stop my computer with a blue screen coming up and crashing

    Hello

    my computer keeps crahing with a blue screan befor, I ran anti spy wear and its projection up to nothing. When it reboots it says. from what I can tell, it's the same thing all the time.

    help please

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.0.6001.2.1.0.768.3

    Locale ID: 3081

    More information about the problem:

    BCCode: 50

    BCP1: 9131EB99

    BCP2: 00000001

    BCP3: 886F7C45

    BCP4: 00000000

    OS version: 6_0_6001

    Service Pack: 1_0

    Product: 768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\Mini080812-03.dmp

    C:\Users\ricky g\AppData\Local\Temp\WER-440422-0.sysdata.xml

    C:\Users\ricky g\AppData\Local\Temp\WER204C.tmp.version.txt

    Read our privacy statement:

    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Hello

    Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    To BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer
    See my answers, if this thread - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if you make them available at the SkyDrive or other
    file sharing sites (such as MediaFire). If you have problems downloading the minidumps
    Copy it to the desktop or Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------------------------------------------

    BCCode: 50 0 x 00000050

    References to Vista also apply to Windows 7.

    Have you recently added any hardware? Have you updated any drivers just before these
    has started? (Check control panel - updates of Windows to see if all drivers have been updated
    all the time this started) guilty likely hand are video driver, other drivers,.
    memory and antivirus/antispyware/security products could be at fault, but also in car
    questions.

    Use the troubleshooter below and refer to the following message for pilots and memory
    When you get these sections and then back to the resolution of the problems according to the needs.

    BCCode: 50 0 x 00000050

    Cause

    The BCCode 50 usually occurs after the installation of the defective material or in case
    failure of the hardware installed (usually associated with a faulty RAM, either main memory,
    Cache L2 RAM or video RAM memory).

    Another common cause is a defective system service installation.

    Antivirus software can also trigger this error, as can a corrupted NTFS volume.

    Solve the problem

    Solve a defective hardware problem: If the material has been added to the system recently,
    Remove to see if the error recurs. If existing hardware has failed, remove or replace
    the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    Fix a defective system service: Disable the service and confirm that this
    resolves the error. If so, contact the manufacturer of the service on a possible system
    Update. If the error occurs during the system startup, restart your computer, and press F8 to
    character mode menu that displays the choice of operating system. As a result
    Windows Advanced Options, select last good known Configuration option menu.
    This option is most effective when a pilot or a service is added at a time.

    Solve a problem of antivirus software: Disable the program and confirm that this fixes
    the error. If this is the case, contact the manufacturer of the program about a possible update.

    Fix a corrupted NTFS volume:  Run Chkdsk /f /r to detect and repair disk
    errors. You must reboot the system before the start of the analysis of disk on a system partition. If
    the hard drive is SCSI, check for problems between the SCSI controller and the disk.

    Finally, check the system log in Event Viewer for additional error messages that might help
    identify the device or driver that generated the error. Disable the cache in memory of the BIOS
    could also resolve it.

    BCCode: 50 0 x 00000050<-- read="" this="">

    * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue
    Screen info that would help. Such as ITC and 4 others entered at the bottom left.
    And other information such as codes STOP error and info such as IRQL_NOT_LESS_OR_EQUAL
    or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My computer restart itself and come up with a 'blue screen '.

    What could be?
    How do we prevent it?
    How did I get it?

    I have absolutely no idea about it so I can't give much info, but as far as I know is it turned off my computer, and then comes up with a blue screen and restarts my computer.
    It happens on a regular basis or not at all in a day. I want to stop now so it doesn't happen in the future.
    Please a little help... It happened for about a week and a few days now and I want to stop it.
    I did not have a chance to read what is said on the blue screen, but I've seen the word "pen-drive" used and I have no idea what it means. I'm not a computer genius, but I hope that you are!
    Thank you very much
    Zoe.

    It can help to look at the files minidump against accidents with a debugger.

    Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

    The following link has information about the use of Windows Live SkyDrive:

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

    In addition, you do not necessarily have compress the minidump files, you can download one at a time.

  • I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

    Hello.

    Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

    Here's what happens:

    Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

    I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

    Root Cause found.

    Unknown bug control: one error checking.

    Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

    After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?


    Thank you in advance for your help!

    Hello

    Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
    page will show you how to get them.

    How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
    Stores) can help to give a proper diagnosis of the machine.

    You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
    way off the machine. Then re-install Windows that "might" help if the problem is software partner.
    Of course, you will need to reinstall your programs and restore the data in the machine.

    Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
    reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
    do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
    the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

    Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
    What update because they will often rollback then repeat the installation until the correct version appears), modem
    and all of the other major features, you could have as 3rd party mouse or keyboard.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    NOTE: Often restore audio drivers to check the version after installing and restarting is
    see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
    several tests according to the recommitments how much he makes.

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Receive error "Error of FBI!" with a red screen when you try to restore my HP back to Windows 7.

    What is an FBI error! __

    I tried to install / restore windows 7 Professional on my hp computer that came with win xp pro and win 7 pro. But I get this error message after windows copies the files and start the installation.

    The FBI mistake!
    Summary: Spawn program () fatal timeaction
    Info of the UIA. 945, FBI preos processing error.
    You must shut down the system and return to the command.

    with red screen...
    I tried 4 or 5 times without success... ill be and tired of this _ microsoft, time to switch to mac...

    Any help is appreciated.

    I solved the problem!

    I think that the provided HP recovery partition is small to restore windows 7 and office 2007 (as it is predicted for xp)

    When installing with the restore cd, she lays on the partition that you want to, you can select 1 partition, or score 2 or 3 etc... selected .i 2 partition with 50% of space in each partition and continues the restoration, which has solved the error of the fbi. I installed since January 2010 as it much win 7 hp pcs downgraded win xp (preinstalled). HP have not corrected the problem and yet!

  • Computer laptop crash with the Blue error screen, locale ID: 4105, BCCode: 4A

    Original title: screen blue Usb_bugcode

    NEED HELP!

    Hello world. Could someone help me please! My phone hangs with the Blue error screen, and it does on a daily basis. I tried to find a solution online but nothing seems to work. Here are the details:

    I have a laptop with Windows 7 Edition Lenovo Home premium (Service pack 1). RAM: 4 GB. 64-bit OS. Intel Core i3-3217U CPU @ 1.80 Ghz

    And here's the problem:

    Signature of the problem:

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.768.3

    Locale ID: 4105

    More information about the problem:

    BCCode: 4A

    BCP1: 0000000074EC2E09

    BCP2: 0000000000000001

    BCP3: 0000000000000000

    BCP4: FFFFF88002A84B60

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\043015-13057-01.dmp

    C:\Users\Jimmy\AppData\Local\Temp\WER-855899-0.SysData.XML

    Can you please put step by step directions? I'm not very good with computers, and it's really frustrating! I tried to remove and reinstall the usb drivers but that didn't do anything. I read the other threads on the similar error but couldn't find a solution. Thanks for your support!

    Could this be something to do with a monitor Samsung that I use?

    KD > lmvm sports

    start end module name

    fffff880 '075da000 fffff880' 075e2000 SPORTS (postponed)

    Image path: \? \C:\Windows\system32\Drivers\SSPORT.sys

    Image name: SSPORT.sys

    Timestamp: Fri Aug 12 00:07:32 2005 (42FBDA34)

    Sum: 0000D 894

    ImageSize: 00008000

    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

    SSPORT.sys 32-bit Port claim Driver of Samsung Electronics

    Samsung ML-1430 series Samsung ML-1430 series USB001 unavailable

    You need to update or remove a SSPORT.sys. Zig - zag pointed out to you earlier. Please uninstall this printer and related software.

    Type device manager in the search above the Start button box and press ENTER. Find and right-click on the device and click on uninstall from the drop-down list. Restart your computer.

    Select the hotkey Windows key + R, type Appwiz.cpl and press ENTER . Place the cursor on Samsung, right-click and select Uninstall from the menu drop down. Restart your computer.

  • Need help with the Blue error screen.

    I'm having problems with the Blue error screen at startup which said "less than or equal Driver_IRQL_not. He entered the State of memory dump & black screen after that.  Nothing was abnormal after checking all the drivers in windows 7 Edition Device Manager Home premium. I'm really lost as to what causes it? My computer is a toshiba satellite laptop computer P840 pourrait-someone ' a please advise me on this matter. Thanks in advance for your patience.

    Dear Zigzag3143,

    I finally managed to fix the problem by the chance. I had discovered that this problem was caused by the sypnatics of the laptop touchpad driver. Uninstalled A & reinstall it with the correct driver from the laptop manufacturer websites. Did not expect that it is the cause of all the problems. Thank you for your valuable advice.

  • Black screen with a blue glow on screen 55 "

    I'm having a problem with the 55 '' LCD Cisco monitors where they randomly have a black screen with a blue glow at the bottom (hanging vertically).  Their power off, then bring him back the photo.  The DMP continues to play their content, and they are not connected by RS232, so I don't know that it is not orders this way.  We have two side by side, and it is never both at the same time.  It is one or the other, and they seem to alternate.  Last week from the other two, who are in another building and in separate rooms in one room on the other hand, started having this problem also, but they have been in service for a few months more.  Last week, it was one, which is just in front of the person to me, and this morning it was the other.  The oldest of them is just less than a year in the service.

    Any suggestions?

    Hi Michael,

    I know a couple of back issues of customer with 55 '' screens goes black after a while. Best option is that you open a service request in the TAC of revision of the exact firmware running on LCD screens and see if they match a known problem that can be corrected - since I do not believe that there is a patch available in general release.

    Best regards

    Marco

  • I have problems with random blue screens - 1st BC Code - of the suggestions?

    I have problems with random blue screens - 1st BC code - all others are zeros.  6_1_7601 OS version, produced 768_1.  Any suggestions?  My computer is a model of HP P7-1235.

    Thank you.

    The minidump files showed two errors blue screen, an error KMODE_EXCEPTION_NOT_HANDLED (1e) referring to the amdxhc.sys and an error SYSTEM_SERVICE_EXCEPTION (3B) referring to the usbfilter.sys:

    Bugcheck 1E, {0, 0, 0, 0}

    WARNING: Unable to verify timestamp for amdxhc.sys
    ERROR: Module load completed but symbols can be loaded for amdxhc.sys

    Bugcheck 3B {c0000005, fffff8000f4770c5, fffff880085feb10, 0}

    WARNING: Unable to verify timestamp for usbfilter.sys
    ERROR: Module load completed but symbols can be loaded for usbfilter.sys

    The amdxhc.sys is the AMD USB 3.0 driver and the usbfilter.sys is the AMD USB filter driver.

    The amdxhc.sys is dated January 3, 2012 and the usbfilter.sys is dated November 16, 2011.

    Two of these drivers should be updated to the latest version to ensure compatibility with the motherboard and between them.

    HP has an available Update for AMD USB 3.0 driver but I do not see an AMD USB filter driver available for your computer updated.

    I might suggest to try to get the package of motherboard chipset from AMD for versions newer and compatible to the two pilots.

    You can try the "AMD Chipset drivers' starting from the following link which should update the two drivers.

    http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

    I recommend to create a System Restore Point before installing the new motherboard drivers.

Maybe you are looking for

  • iMac 5K has stopped working

    I was with my imac and suddenly the screen went black, then I tried to turn it on and all I hear is just a "click", nothing else happens. the screen even turns. I checked the power cord and it was fine. What could happen? (The iMac is 2 months old)

  • SyncToy error

    Why do I get "Exception during preview: cannot create provide" message when you try to run the Synctoy 2.1.0.0 software Using Synctoy since 2009 with no prolbems Operating sysytem: WIN XP Prof   [Moved from comments]

  • I'm stuck on my computer

    I was on the computer looking for yahoo, and they me shot because they were told I had already signed on somewhere else. My password no longer works. I had norton scan earlier and he said that he blocked a person to surrender. Although Apparentley so

  • remove an e-mail account in the mail application

    I have two e-mail accounts linked to my Mail application. How can I delete one of them?

  • Mail application does not display photos - it just says: photos, but the text does not appear, how to correct?

    Separated from this thread. My operating system is windows 8.1 - when using the mail application the photos appear not - it just says: photos, but the text appears. Photos open in Outlook. Can you help me? John