"redemption code" not recognized

Similar Questions

• CD/DVD getting not recognized with error code 0 x 8007003

  Original title: Windows Media Player

  my lap top will not come CD dvd I used microsoftxit as fair, he told me that it can not detict cd dvd and error code 0 x 8007003 can do everything what it means please

  Hello

  • What operating system is installed on your computer?
  • You did changes to the computer before the show?
  • What Microsoft fixit did you use?
  • What is the full error message that you receive?
  • What is the number and the model of the laptop you are using?
  • Should be restricted to any particular CD/DVD?

  Try the suggestions in the link and check if it helps:
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

• DVD player not recognized code error (Code 19)

  I do not see my dvd player
  When I go into Device Manager, the CD shows a yellow watch marker.it also this below...
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  Help, please

  Try the steps mentioned in this article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  http://support.Microsoft.com/kb/314060
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

• Hauppauge HD PVR device not recognized / Code error 10

  From the beginning, I bought a Hauppauge HD PVR about four months ago and, to my delight, it worked flawlessly out of the box on my laptop Toshiba in Windows Vista and my laptop Windows 7 Sony. I had saved a good part of my X - Box 360 images when, one day, the device has mysteriously stopped working on my Windows Vista laptop. Whenever I plug it into the laptop Toshiba, it registers as an unknown device or with a wrong code error 10 device. Sometimes, maybe once in ten when moving from one port to another, it will come to the top and works correctly, but if I dared to turn off the computer, turn off the PVR or unplug the USB cable it immediately returns to what is not recognized / 10 state code.

  The laptop is a Toshiba Satellite A305.
  The processor is an Intel Core 2 Duo T5800 2 .00GHz
  There 4.00 GB RAM
  The display adapter is an ATI Mobility Radeon HD 3470
  I am running Windows Vista Service Pack 2, 64-Bit.

  The device in question works perfectly on my other laptop. I tried another USB cable. I uninstalled and reinstalled the USB controllers repeatedly. I tried to uninstall and reinstall the drivers, as well as trying to do multiple versions of the drivers. The device works without error on the Sony laptop, but refuses to work correctly with the Toshiba.

  Any help you could offer would be great.

  Hi ZeroAlex,

  Because you are always faced with the question, I suggest you do an InPlace Upgrade\Repair installation.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  To perform an upgrade in-place, follow these steps.
  a. close all running applications.

  b. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  c. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  a. click go online to get the latest updates for installation (recommended).

  b. type the CD key if you are prompted to do so.

  c. in the "Windows Installer" page select the operating system you want to update or Inplace.

  d. click Yes to accept the Microsoft software license agreement.

  e. on the which type of installation you want? of the screen, click upgrade.

  f. when the installation is complete, restart your computer.

  For more information, please see the link:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Once the upgrade has completed, you must activate your copy of Windows Vista.

  For more information about how to activate Windows Vista, see the following article:

  How to activate Windows Vista.

  Hope this information is useful.

• Microsoft 2000 not recognized wireless mouse - code 43

  wireless mouse worked for 4 days - so not recognized and recommended to change the device - problem with the code 43 - it is brand new - 2000 microsoft wireless mouse.

  It's the same thing with my previous microsoft mouse.

  I am so frustrated with this - strangely, I bought a wired mouse to my local supermarket (Asda) for £6 and it works perfectly.

  Hello

  Run the troubleshooter from the link below and check if it will help: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  You can also try the steps listed in the link below: troubleshooting failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

• USB not recognized on the computer. Error code 43.

  Printer was working fine and then - after Microsoft updates have been installed - USB not recognized-Code 43

  Have you tried the new usb - port, nothing works

  Thank you

  We uninstalled the printer and then tried again the USB and it worked

• DVD player not recognized; error code 10

  Our Museum has a Dell Optiplex 745 on which the XP operating system has been replaced by Windows 7 Professional.  The DVD drive is not recognized, and the error code 10 stipulates that the driver could not be loaded.  I tried upgrading the driver online, but I was told that the driver installed is the right one for this player.  If I remove the drive with the machine on, uninstall the driver, stop and then restart and then restarting to reinsert the DVD, the computer recognizes the drive and install it and it works.  When you restart the computer the next morning, the car disappeared again.  Would appreciate any help I can get!

  Thank you!

  Werner Horlbeck

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• ("My CD or DVD drive is missing or is not recognized by Windows (Code 39)")

  My CD / DVD is missing or is not recognized by Windows. My driver Version: 6.1.7601.17514, OS is windows 7.

  I received the following message:

  • Windows encountered a problem installing the software driver for your device
  • Windows raise driver software for your device but encountered an error trying to install it.
  • Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I tried several ways to follow the steps that says on the website of Microsoft, as with the help of the hardware and peripheral troubleshooting tool, but it didn't work.  I also used a new external device and was not recognized by windows as well. By the way

  Can you still collect my DVD player?  How can I solve this problem? Thank you

  Run these set the then restart.

  http://support.Microsoft.com/kb/982116

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/316529/

  http://support.Microsoft.com/kb/314060

• Hercules dj mp3 e2 is not recognized, error code 43

  When I connect my hercules dj mp3 e2. He said: usb device not recognized. When I troubleshoot it says error code 43.  What can I do to fix this

  Hi special k,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked?

  ·         You are able to access the other USB devices?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try to use the USB device to a different USB port and verify.

  Method 3: Try to use the USB device on another computer and check if the problem persists.

  Method 4: Uninstall and reinstall all USB controllers, follow these steps:

  (a) click Start, type Device Manager in the start search box and press enter.

  (b) expand Bus USB controllers.

  (c) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (d) restart the computer and reinstall the USB controllers.

  (e) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  For reference:

  Tips for solving problems of USB devices (Applicable to Windows 7)

• Redemption code does not work

  Hello

  I bought Lightroom in 2013 and you just moved to a new laptop. IV downloaded the software on my new laptop, but when I enter my redemption code/serial number says Lightroom "code is not valid, please try again."  I bought the license online and have retained the original e-mail with confirmation and the redemption code. How am I able to fix this without having to buy a new license?

  Thank you

  A redemption code is used only once to acquire the serial number.  The serial number is what you should keep and use all of the facilities/activations.  If you have registered your software when you initially installed, then the serial number may be available through your Adobe account online.

  If you can't find your serial number but always have the software on the old machine, you might be able to find the serial number by using one of the tools below...

  If it's a Windows machine, and then try running Belarc Advisor

  http://www.Belarc.com/free_download.html

  For a Mac, you can try:

  https://Mac-product-key-Finder.com/

• Lightroom 6 not install, put the redemption code in, no serial number required?

  I bought Lightroom 6 in detail, store, put on CD, put in the redemption code, does not download.  How can I get it work?

  Hey johnc,.

  Use the below link to exchange your product, once you have done, you will get a serial number which would need to activate the software.

  https://redeem.licenses.Adobe.com/getserial

  Now, download and install the product using the link below.

  Install Photoshop Lightroom

  Let us know if that helps.

  Kind regards

  Mohit

• Tried to use the Redemption Code - go to the download and Page not found

  Just bought Adobe Photoshop elements 14 Best Buy.  Came home and implement Adobe ID.  Went to redeem with the code and he agreed, but when I try to download it says: Page not found.  I read the forum and tried another link - same result.  HELP PLEASE!

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

  or

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Product code reinstall CS4 is not recognized

  My hard drive crashed on my iMac. I managed to restart on and external with El Capitan 10.11.4. However the product code is not recognized on my CS4. Help, please.

  Graham

  first of all, How to open third-party developers not identified in Mac OS X applications ' Mac Tips .

  then, find the serial number of your product Adobe quickly

• I entered the Redemption Code and message says page not found for photoshop

  Unable to install Photoshop. It says 'Page not found '.

  Hello

  Please visit https://creative.adobe.com/redeem to use the code for Photoshop Creative Cloud.

  See also the article: https://helpx.adobe.com/x-productkb/global/redemption-code-purchase-help.html

  Please write if it helps.

  Kind regards

  Shelly

• Can not find the redemption code

  I use a student code on a new computer, tried to redeem my code and it wouldn't let me I am looking for a redemption code. It leaves me only have a 30 day free trial.

  You are allowed to use a code once, and when you do, this enables your cloud account

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "