RedHat Enterprise 2.1

Similar Questions

• PCI-Gbspecifications installation on Redhat Enterprise Linux 5

  Hello

  I tried to install the beta version of the software for the PCI-GPIB on Redhat Enterprise Linux 5 card.  Has anyone managed to do this?   I get an error message indicating that I need to install the package kernel-source to continue.  I did it by installing the package kernel-devel and kernel-head, but still receive the same error messages. I also tried to make a version of Redhat of the answer to Q5 in the Readme for this software, but again without success.  Someone can please help me out (and don't forget that I'm still pretty new to linux administration).

  Hello

  The actual error message said I'd need the kernel-source package to continue (I thought I had).

  In fact this morning I turned on the computer and just tried again, and it worked.  So somewhere between the kernel-devel/kernel-header download, try suggests SUSE difficulty in the readme file, and install the complete kernel as non-root sources (suggested by another linux forum), fixed it.

  Thank you very much!

• RedHat Enterprise 5 VMware Tools

  Think this is the right forum...

  Question:

  Have installed Redhat Enterprise 5 and vmware tools.  Since this is a server x-Window has not been installed, so it is impossible to start vmware-toolbox.

  I want to assure that this guest is logged with the host.  How can I access vmware-toolbox w/o X Windows being installed?

  / Cheers

  You can not.

  But if you talk about time synchronization, check the invited .vmx file. "If there is a line"tool.syncTime ="TRUE" ' then time synchronization is enabled.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• RedHat Enterprise license

  I have difficulties to find the answer to this, so maybe you guys can help.  We are building a new environment on blade material HP, some physical running RHEL 5 AS and some virtual ESX running.  Of course on the physical aspect, there is no doubt about the licenses of Redhat, you either pay unlimited 2 Sockets or sockets.  However, I can't find an answer on the virtual machines.  Each VM requires a separate license of RHEL or is it more like Server 2003 Enterprise where you can run multiple copies (up to 4?) licensed in an ESX environment?

  Any help you can give would be appreciated and if you find the information online please let me know the source because I couldn't find

  Thank you

  Grahame

  Hello

  Each VM requires a separate license. I would contact your representative commercial RedHat to explore options.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• How to install redhat enterprise 2 disk images 6

  The installation package for Red Hat Enterprise 6 64-bit is available in 2 iso images, one to boot from and the other and most importantly, has the rest of the installation of the files. Start with the boot image is fine, but then he called for the second disc and the question arises. How to direct the process of watching the second iso image to continue the installation?

  Just to be clear, it's an installation disc, that is to say, iso images are on the hard drive.

  Thanks for your help.

  The virtual machine has a CD-ROM drive.  That's what you use to connect the ISO image to the virtual machine to install the operating system.

  I do not know the exact clicks, menus, icons, etc. for the merger... I know that desktop and Player under Windows.  But the tasks remain the same.

• Clone the volume mounted on ' / boot ' doesn't have a machine of REDHAT Enterprise 5

  Hello

  I downloaded and installed Voncerter Standalone Client 4.0.0 on a Machine virtual Windows 2003.

  I tried to convert a physical Machine to RedHat 5 in a Virtual Machine (esx Server 3.5).

  The following error occurred at 3%:

  Error: Impossible to clone the volume mounted on ' / boot ' of 'ComputerName '.

  No one knows what to do here?

  (I have not all additional configurations except those proposed in the Wizard)

  Kind regards

  lmayr

  Another customer recently had a similar problem where the 1st volume cloning failed because he used a partial host name and had not configured DNS suffixes for the static IP settings of the VM assistance network.  Please check that.  If this does not solve your problem, then please upload the logs of the task (the "export logs... ("link just above the lower-right event log.)

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Root password for Redhat Enterprise Linux 5 by VSM download

  Where can I find the default root for rhel5 for vsm password?

  Hello Ritchie,

  Try again with 'secur4u' this will be the password for root. Or try again with the username: "localadmin" and password: "secur4u" in CLI.

  Then try to reset the root password.

  (localadmin) # sudo knew.

  (root) # passwd root

  New password:

  Confirm the password:

  Then the password for the root user got reset. Try this and let us know how its going.

• What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

  Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.

  Hi all

  We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.

  I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.

  can anyone share the ID document or information related to it.

  If OS RHEL 6 update 4 to 6-7 update patch

  (1) is it compatible

  (2) bugs or problems reported

  (3) in addition to the binary link again than the DBA to perform any other

  Thank you

  Hello

  6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4

  Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)

  -Jonathan Rolland

• What oracle versions redhat linux and takes in charge the JSK?

  Hello

  I try to install JSK on Oracle Linux 7 server, and when I run the runme script, show me the terminal

  "Error: only Oracle Enterprise Linux or RedHat Enterprise Linux are supported.

  "Action: use JumpStartKit on a supported Unix environment.

  So can someone please show me what version of oracle linux I can use?

  Best regards!

  Hello.

  As specified in the Certification Matrix, WebCenter Portal 11.1.1.8 is not certified with Oracle Linux Server 7 again.

  http://www.Oracle.com/technetwork/middleware/downloads/FMW-11gr1certmatrix.xls

  Kind regards.

• RedHat 5 video failure using stand-alone converter

  I'm running a 64-bit Redhat Enterprise Server and P2V trying it.

  Converter using Stand Alone Client 4.01. Build 161434

  Server ESXi Version 4.1.0

  She will run and do not reach 1% with the "FAILED: methodfault.summary" error.

  On the server, it registered the fault as:

  Warning message on RedHat: insufficient video RAM. The maximum resolution of the virtual

  machine will be limited to 1176 x 885. To use the configured maximum resolution of 2560 x 1600,

  increase the amount of video memory allocated to this virtual machine by setting svga.vramSize = "16384000"

  in the virtual machine configuration file. WARNING 11/29/2012 14:30:08 RedHat root

  When this does not work it will remove the virutal machine and there is no file settings to update.

  Any ideas how to make this work?

  Thank you!

  If you have a Windows machine, you can try to use the converter 5.0.1.

• After update to FF 30 I am no longer prompt proxy credentials

  I use FF behind a corporate firewall/proxy that requires us to enter our user credentials when you access most of the Internet sites. I've just updated v30 this morning, and immediately after the restart of all these sites were blocked with a message 'Access denied' proxy saying he lacked my credentials. In the past (and other browsers) FF popup would be a prompt asking you for my credentials. Since the v30 update prompt is no longer displayed, I don't have the ability to authenticate and proxy blocking my access.

  I tried to clear all caches, cookies, passwords, saved reset FF, and I even amazed my profile dir. Nothing seems to work. Advice, suggestions, etc. would be greatly appreciated.

  Thank you.

  Linux - RedHat Enterprise customer v6.5
  FF v30

  There was a change for Mac, but maybe the same change affects Linux? If please see this thread from yesterday and let me know if anything seems relevant to your operating system: "You are not authorized to view this page".

  Edit: By clicking on through the article on DND, the same issue affects users of Mac and Linux, so the workaround may well help you.

• Satellite Pro L300 - installation of Linux RHES4 cannot find HARD drive

  Hello

  I have a Toshiba Satellite Pro L300 and it comes with preinstalled Vista, I loaded the XP due to the fact that I was going to see if I could load linux Redhat Enterprise 4 and dualboot both operating systems at the same time but discovered this "DOUBLE BOOT" means that you can have 2 operating systems but can only bott one or the other...

  Anyway, my problem is that I want to just install Redhat Enterprise 4 linux on my laptop, but when it comes to partition the hard drive I get an error message saying "cannot find the hard drive to create file systems" then click OK and restart.

  Any ideas people?

  Chris.

  Hello

  I m not a Linux expert, but I think that the reason is missing SATA drivers.
  Normally, on each notebook with SATA HDD, you need SATA drivers to recognize the HARD drive before installing OS.
  If you install Windows XP or Vista, you need storage for this Manager. The drivers can be loaded with an external floppy drive.
  But I put t know how it works on Linux

  An alternative you can change in the mode of AHCI Compatible HARD disk BIOS. Then, you don't need drivers and your disk should be recognized correctly.

  Otherwise, I recommend this thread: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14

  Welcome them

• No material listed in Labview 2010 Linux DAQ

  Hello

  I have a problem with DAQmx Base 3.4.0 under Linux:

  mxbaseconfig shows my NOR-6009 device to the USB port. I can also create tasks corresponding to the nor-6009 in there. When I try to create a task in Labview 2010, one of the constant I/O are always empty. Dropdown menu arrow is grayed out. If I get the name of the device directly in the constant, he through me an error :-( Do not know Semms like Labview, which DAQmx Base instruments are connected...

  With devices VISA, I don't have this problem. All VISA devices are displayed in the dropdown of the constant and work correctly.

  lsdaq gives me:

  --------------------------------
  Detect of National Instruments DAQ devices
  Find the following materials:
  NEITHER 6220: "Dev1" (PXI1::4:INSTR)
  OR USB-6009: "Dev2' (USB0::0x3923:0x717B:0119B3BD: RAW)
  --------------------------------

  I use

  RedHat Enterprise Linux 5.5

  NI - 488.2 - beta - 2.51 b 1

  NI-VISA - 5.0.0

  NOR-DAQmx Base 3.4.0

  LabVIEW 2010

  All installers worked well...

  No idea how to access my OR-6009?

  Felix1234 wrote:

  It the device port ID is connected by a string variable to the Vi DAQmx Base... also works perfectly for me. But I do not know why the variable I/O noit work...

  DAQmx Base does not have controls that LabVIEW as DAQmx done [1]. Because the driver does not use background services, it cannot be said LabVIEW what devices and channels are available on the system.

  [1] NEITHER-DAQmx Base tasks and physical channels are not listed in the task of LabVIEW and string constants and controls
  http://digital.NI.com/public.nsf/allkb/57393FEDF313E99B86256F0B0010AD2D

• gpibprt compilation error. Ko

  Installation program:

  Using redhat enterprise 5 on a dell 64-bit workstation.  LabVIEW 8.6 Professional fresh install.

  I need to get NIVISA running/configured to communicate with instruments to test on a local network using a VXI - 11.

  Didn't have not a GPIB - all communication/control will be on a LAN/TCPIP.

  Problem:
  Impossible to run utilities VISA because the gpibprtk.ko module is not found.

  Forums to search, this seems to be a matter of 64 bit / 32 bit.  UpdateNIDriver running and watching me do this output:

  ..........

  MV objects/gpibprtk.ko / bin/objets/gpibprtk-interfaceFile.ko
  LD - r items/gpibprtk - interfaceFile.ko items/gpibprtk - processed.o - o objects/gpibprtk.ko
  LD: relocatable connecting with relocation of format elf32-i386 (objects/gpibprtk - processed.o) to format the elf64 - x 86-64 (objects/gpibprtk.ko) is not supported
  make: * [objects/gpibprtk.ko] error 1
  ERROR: gpibprtk.ko failed
  gpibprtk.Ko could not be updated.
  WARNING: unable to unload the nipalk memory module
  / usr/local/natinst/nation/SRC
  updated nipalk.Ko to date.
  Failed to update the drivers of National Instruments.

  ...........

  It would seem that the module is 32-bit and will not be a link to a 64-bit kernel.  I'm not the expert on the compilation and link, but the link

  error seems to be the central problem - no link = no module only = no workie.

  So, I guess I need this add-on charge to get my VXI-11/LAN stuff to work even if I don't use a GPIB - not least the hardware interface.

  I've attached the output to updateNIDriver for reference.  All software from the CD - workstation doesn't have external access - although I can 'Sandalenet' of things on the system.

  Any help appreciated.  I'm a little google on at this stage.

  Thank you

  Steve.

  Sammy,

  Thanks for the reply.  I was able to solve the problem, as shown below (post of the linux users group).  I had also posted the question in the Group of linux users.  I've marked as answered it, but I forgot to delete it here.  In any case, I found that you need to install BOTH versions updated to NIVISA and NI488, so I ran updateNIDriver to compile the module.  Who could have redundent, but the updateNIDriver returns the results to the terminal so I can see is it compiled, or wrong on.

  Steve.

  --------------------------------------------

  Update #2.

  I downloaded and installed ni4882 - 2.5.4 b 1 - version.tar.gz.  This contained the source for ni488k.ko who compiled and installed OK.

  Interactive utility of VISA can now talk to a LXI instrument on the local network, so it seems that we are upward

  I guess the new version of NI-VISA now ni488k.ko calls to load if not there rather than gpibprtk.ko.

  I would have thought the pilot would have been included in the package of NI-VISA 64 bit ISO updated because I think it's orginal source 488 files came from, but apparently, you need both - perhaps because the 488 driver is still in beta?

  So it turns out that I answered my own question - installing updates, but I leave here in case, it is useful to someone else.

  Since the workstation is autonomous, automagic editing approach is not an option - the old way to read the msg of error and resolve is needed here:.

  -------------------------------------

• Updates on the limit of 2 TB on MD3000 VirtualDisk size?

  Hello

  I just string a MD1000 with disks SATA 750 GB to a MD3000 and it seems that this limit of 2 TB VirtualDisk still exists. Are there updates on nicreasing this limit?

  Thank you.

  There is now an available upgrade, called generation 2 for the MD3000 (and incidentally MD3000i) available on the support.dell.com site storage array allowing > 2 TB and RAID 6 virtual drives (and other features).

  MD3000 1 includes all the generation (and MD3000i) releases to date, it should be noted with the 06.xx.xx.xx RAID Controller Module firmware version. 2nd generation RAID Controller Module Firmware version is 07.xx.xx.xx.

  PLEASE NOTE: The upgrade of the Module of generation 2 RAID Contorller is an offline OPERATION, thus all i/o to the storage Bay must be STOPPED PRIOR to the download of the update.

  The MD Firmware Cross Generation Upgrade Utility should be used to upgrade the firmware of the controller RAID 1 from generation to generation 2 Module. The utility is installed with the latest version of the Storage Manager MD as part of a selection of Management Station installation.

  NOTE: Microsoft Windows 2000 and Redhat Enterprise Linux 3 as a host what OS are not supported by the generation 2 upgrade.

  Here are the steps to apply the upgrade of the generation 2:

  -Read the applicable documentation

  -Stop all i/o to the upgraded storage array

  -Back up all data on the storage array

  -Install the upgrade of the management generation Station 2 Modular Disk Storage Manager on the management station

  -Install the upgrade of the generation 2 Modular Disk Storage Manager host on all host servers that connect to the storage array

  -With the help of the MD Cross Generation Upgrade Utility storage array Firmware upgrade to the generation 2 RAID Controller Module Firmware

  The CD of MD3000 Documentation generation 2 can be found at:

  The generation 2 MD3000 Resource CD with the Station management software and server host are:

  The generation 2 MD3000 RAID Controller Module Firmware are:

  Please report if you have any questions.

  Dave