(Redirected) T5810 - Configuration of HDD / Expansion
Does anyone know the configuration specific to the hard drive bays T5810 with respect to the total capacity of the disks 2.5 and 3.5? Sale and manual doc is a bit ambiguous. Plan would be to order with a G 256 SSD as boot drive, then add an additional 480 G SSD, plus 1-2 3.5 "drives of the machine spinning it would replace. What I think, based on what I see, is the berries can accommodate up to 4 drives, either 2.5 or 3.5, but the specs say 2 3.5 drive bays only... Looks like one of the optical bays can be used for additional disk drives, but referred to an "adapter" (reference?) . Told me the total, based on slots SATA on the MB, is 4. I won't order the raid card, so...
Also, if ordered with 1 single drive, the SATA and present for the full expansion of power connectors? It does not allow to order a configuration for 4 hard drives without buying 4 hard drives... bad luck it's true...
Thanks in advance.
Thanks in advance...
Hi snoylekim8,
Please repost this is the forum for faster assistance office.
http://en.community.Dell.com/support-forums/desktop/
Tags: Dell Products
Similar Questions
-
(Redirected) T5810/hard drive Configuration Options
Does anyone know the configuration specific to the hard drive bays T5810 with respect to the total capacity of the disks 2.5 and 3.5? Sale and manual doc is a bit ambiguous. Plan would be to order with a G 256 SSD as boot drive, then add an additional 480 G SSD, plus 1-2 3.5 "drives of the machine spinning it would replace. What I think, based on what I see, is the berries can accommodate up to 4 drives, either 2.5 or 3.5, but the specs say 2 3.5 drive bays only... It seems that one of the optical bays can maintain disks 3.5 or 2.5 (possibly with an optional adapter, I see not listed). There are enough connectors SATA on the MB, and I'm not going to add a hardware RAID card.
Also, if ordered with 1 single drive, the SATA and present for the full expansion of power connectors? The configuration in order to specify a configuration of hard disk without also ordering the hard drives as well, that won't be necessary in my case.
Thanks in advance.
Thanks in advance...
Hi snoylekim8,
Please repost this in the forum faster assistance office.
-
Portege M700 - Ultra Slim Selectbay HDD expansion?
Hello
I tried for a while to buy an adapter for my Ultra Slim Selectbay HDD in my M700-139. I can't find a buy in the United Kingdom who said that it is compatible with the M700.
Does anyone know if it is possible to buy an adapter for this Bay - and if you can, any idea where to buy from?
Thank you very much!
Hello
I found this:
http://www.shopbot.com.au/pp-Toshiba-slim-SelectBay-HDD-adaptor-pa3408u-2etc-price-93894-3626292.htmlBut look, man. all compatible parts and Portege M700 supported parts can be ordered from the ASP in your country.
Maybe contact the guys then you would ask this adapter.
Welcome them
-
Hello. I am about to receive a brand new k410 lenovo as beginning of this anniversary to my parents to replace a worn on asus and just wondering if the k410 has a capacity of an ssd to climb?
What I want to do is to install a secondary ssd for ability to dual boot on windows 7 with storage game to increase the already massive 2 terrabytes that the Office has
This main card that has the ability to expanasion like its big brother the k330?
Hi prowlus,
Welcome to the Lenovo Forums.
The K410 Lenovo has an optional mSATA to card converter SATA you can insert an mSATA SSD (see spoiler). Open your chassis (refer to page 25 and 26 of the hardware maintenance manual) to verify if you have this expansion.
-
Configuration optimal HDD and software settings
I do a reload of the system installation, one of my systems to be
dedicated to editing video and effects. My equipment is:
- MB: P6t Deluxe V2
- Operating system: Win7 64 bit
- CPU: I7 920 (Stock # no OC)
- GPU: Nvidia 285
- RAM 12 GB @1600
- HARD DRIVE 1: 500 GB 7200 RPM
- HARD DRIVE 1: 500 GB 7200 RPM
- HARD DRIVE 1: 1 TB 7200 RPM
- HARD DRIVE 1: 1 TB 7200 RPM
- HARD drive 1: 1. 5 TB external USB for backups only
Software I have user first Pro CS5, After Effects CS5, SoundBooth CS5 and Photoshop CS5. My question for the software is how to better set up. I've seen many configurations of caching / Scratch and various allowances of CPU Ram and honestly I'm a bit confused by the latter. Also make it Performance vs that memory seems to make no difference visit once. It is better to select on the other? I use dynamic linking a lot so I don't know if that makes a difference in what either.
I know that all these information is found in various discussions in the forum, but I get conflicting info I read through them.
One last question. Do a restart before exporting? I could spend hours doing effects and cuts, and I fear that the RAM is a little full, so I reboot before I did because it gives me a warm fuzzy, but is it really necessary?
Thanks in advance... TJ
Have a look here: Forums Adobe: generic guideline for the installation disc and look at the installer of three discs.
How is it that would translate to your situation:
a. get a disk of OS boot & small enough programs, such as the Samsung Spinpoint F4 320 GB. It is then the C: drive in the overview.
b. use the two raid0 1,000 discs. It would be the D: drive in the preview.
3. use the two 500 discs in raid0. It would be the drive E: in the preview.
No need to reboot before the export. Prior to export is wise however to save the project.
-
Strange Desktop / Start Menu redirection problem
Hi all I have a very strange problem on a field of 2012 server using Windows 7 desktop computers.
When a user connects for the first time the office menu and start to not redirected and I have the following error
You cannot apply policy and redirect the "Desktop" folder to "\\SVR\Desktops$".
Options of redirection = 0x1000.
The following error occurred: "unable to generate a list of known subfolders.
Details of the error: "the system cannot find the specified file.
".However on 2nd session opening the desktop and start menu are redirected properly.
Description:
Applied with political success and redirected folder "Desktop" to "\\SVR\Desktops$".
Options of redirection = 0x1000.This seems also only affect the recent HP Prodesk computers, we started to use.
Desktop and startmenu redirects are configured for a group of users and permissions are the following
Share permissions - full control everyone
Folder permissions - UserGRP Read and Execute only
Any help would be appreciated
Hello
Thanks for posting your query in Microsoft Community.
Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.
Please post your question in the TechNet Forums.
-
Hi guys. Before somewhere I red on USB redirection options. I want unilateral redirecting USB configuration. The customer to only light VM or block of VM USB redirection for thin client. Is this possible?
Environment: vMWare vSphere 5, vMWare View 5. Version 8 of virtual equipment.
Ah, I understand now. You probably want to look into something similar to the following: http://communities.vmware.com/thread/300141
There may be another option, but I have not heard of him. I hope that someone will be able to shine more insight.
-
Portege M300: Is the protection of HARD drive only for the brand of Toshiba drives?
Hello
I am trying to upgrade my Portege M300 with a hard drive bigger, as seen on the Portege forum, I posted the thread after that two hard drives from samsung does not similarly, shortly after the installation of the new.
I just want to know if the protection of Toshiba HARD drive utility is simply made for Toshiba hdd or if it can work on any other brands of hard drives of brand. As I say, I want to upgrade a 60 GB to 160 GB and 2 new hard drive failed. I've since updated my bios to the latest version and I also consider not to install this hard drive protection feature, just in case where it will cause problems once more with my 3rd HDD replacement of same nature.
I appreciate any thoughts on this.
Thank you very much
CHello
Usually it s any manufacturer is.
If the HARD disk supports the CHIP so it should be possible to use this HARD drive.
The HARD disk protection tool verifies the parameters of the HARD disk.
But the settings are configured by HDD manufacture then it might be possible that the HARD disk will not work if the tool would not choose the settings correctly. -
What Toshiba preinstalled programs are safe remove in the form of my laptop?
Hello
This is probably the question most google on Toshiba laptops, but I can't get a clear answer so I thought I'd come to a forum. I have a brand new Toshiba Satellite P870 and startup is very slow, and the overall performance of the computer could be better.
In the list of stuff pre-installed below, I would like to know if there A) would make a difference in performance/speed and B) that I should really delete thePrograms:
Toshiba Assist
Toshiba Config Free
Toshiba Disc Creator
Toshiba Eco utility
Toshiba face recognition
Toshiba hardware configuration
Toshiba hDD protection
Toshiba HDD/SSd Alert
Toshiba Media controller
Plug-Controller Toshiba in Media
Toshiba PC Monitor health
Toshiba Advanced shift control
Toshiba Recovery Media Creator
TOSHIBA ReelTime
Toshiba Remote Control Manager
Resolution of Toshiba and Plug In for Windows Media Player
Toshiba Service Station
Speech of Toshiba systems Applciations
Toshiba Speech system SR motor (US) version 1.0
Toshiba Speech system TTs Engine (US) version 1.0
Toshiba supervisor password
Toshiba Value Added PackageI don't have not really met/used one of these yet and want to know which are worth keeping around, and that I can do everything right on remove.
any advice would be greatly appreciated, but I tried the Decrapifyer program and it really helped a lot.
Hi and welcome to our community.
If it is no longer question of google I really hope that we will find the final answer here. ;)
At first, I must say that each of us has a perhaps different view of this. Some of us want to use a tool of some and some of us don t like some of them is not possible to give a precise answer to your question.
In any case I'll start with my personal opinion, but first some general information. Toshiba recovery image contains many specific tools Toshiba and public services, as well as some additional software. Toshiba-specific tools and utilities are designed to help the user with full control for laptop and also the laptop owner to get useful information on updates.I repeat again, what I write here is my personal opinion and I want to just describe what I do.
I delete after clean install of OS of the system
TEMPRO, Toshiba ReelTime, Toshiba Service Station, and other things like links to eBay, or other stuff that is completely useless to me.
Toshiba listed specific tools are OK, but I put t need them. They start with laptop and sow in commissioning. TEMPRO and Toshiba Service Station are monitoring tools inform you about the new BIOS or driver updates. As I wrote it is very nice, but if the system works perfectly don't change anything.I'll go trough your list and write a comment short for each listed programs.
-Toshiba Assist very useful tool where you can find shortcuts to all the important of Toshiba and utility tools. Leave the shortcut on the desktop
Toshiba - Free Config - very useful tool for the monitoring of the network but not must be started with the OS. Don t he remove the disabe just in the starting System. You can start it when necessary.
-Toshiba Disc Creator useful, but not so important. Depends on the owner of the laptop. I put t use it.
-Toshiba Eco utility useful but for me personally not so advantageous. I removed it from the system. When I want to save energy, I just use the power of Eve plan Windows.
-Toshiba Face Recognition - nice tool to play but I don t use. It is removed from my system.
-Hardware configuration, one of the most important tools of Toshiba Toshiba. Check it out and don t he remove it from the system. -
Portege M700 - protection of HARD drive problem
Hello world
I searched the net for a full day now try to find answers to this.
Note, I am an accountant and not a computer geek.I have a laptop Portege M700. I am updating from Vista to Win7.
Here's the problem:
-Initially tried to uninstall Toshiba HDD Protection via Control Panel and got the message error "internal error 2753 setupftc.exe.
-Then searched the Internet and realized that I had to stop the service first. Note that I does NOT initially stop the service in the Service Manager.
-Now went in the Service Manager to seek Protection of HARD drive and it is not at all.
-Returned east to configuration-Toshiba HDD Protection Panel is listed as a program. It will not always uninstall it... the activiates Assistant uninstaller, and after a few seconds, he simply says the same error message is ' «internal error 2753 setupftc.exe»»-a search on the internet about this error does no useful result. They underline that the registry cleaner programs. I have NOT installed the registry cleaners.
- then I went to the registry and created a backup of the registry.
Then tried all the items containing 'HDD Protection' and started deleting them hoping that it would work.
Then I tried to uninstall.
The computer popped up a message stating that a restart is required.
Tried to restart and got a blue screen.
Then restared in safemode, reloaded the old registry file and VOILA the computer is back to normal again.BUT...
I can not even uninstall HDD Protection. Get the same bloody error.-then downloaded the site Web of TOSHIBA HDD Protection file.
Try to install this file... I get the same error, i.e. "internal error 2753 setuptfc.exe.Ok.. now, I'm ready to give up.
Really, I didn't wipe my comptuer clean to do a fresh install, because it's such a big hassle. And I'm an accountant, not a computer expert so I don't know what to do for a new installation.
For the time I've wasted on this already, I probably just to find instructions on the net and then made a complete new installation.All the advice to fix it, pleeeeeeeeeeeease! : ??
Thank you.
So clean Toshiba HDD protection tool didn't help installation then some registry entries must be screwed to the top.
Believe me, best you can do is to install the OS to aid installation of HARD - disc of recovery http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm recovery mode or use if you have a.
After a clean install of Vista, everything will work correctly, and then you can start with the Win7 upgrade procedure. -
Drivers Windows XP for Satellite L650 - 1 M 6 installation sequence
Hello!
I bought laptop Satellite L650 - 1 M 6, but without an operating system installed.
Then I installed Windows XP.
But I do not know the sequence of CORRECT installation of Windows XP for Satellite L650 - 1 M 6 drivers.
The drivers have been downloaded here
http://ru.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/QUESTION: What is the CORRECT SEQUENCE to install the drivers for Windows XP on the laptop Satellite L650 - 1 M 6?
Thanks to adnance!
The downloaded drivers are:
(1) assist
(2) update the BIOS
(3) Bluetooth Monitor
(4) Bluetooth stack
(5) Bulletin Board of
(6) assistant Bulletin Board of
(7) card reader controller
(8) utility, ChipSet
(9) Sales Manager
(10) common module
(11) Config Free
(12) controls of
(13) display driver
(14) DVD player
(15) Eco Utility
(16) facial recognition
(17) hardware configuration
(18) HDD Protection Utility
(19) AlertUtility SSD HARD drive
(20) Hotkey Utility
(21) EngineInterface of Intel management
(22) driver LAN
(23) Media Controller
(24) Media controller Plug-ln
(25) modem driver
(26) device registry tool network ID
(27) information product online
(28) PC Diagnostic tool
(29) PC Health Monitor
(30) play Ready PC Runtime
(31) power Saver
(32) rapid Storage Technology driver
(33) patch recovery
(34) real time
(35) registry patch
(36) gas station of
(37) smooth view
(38) sound Driver
(39) supervisor password utility
(40) TEMPRO
(41) touch Pad Driver
(42) start-stop of touchpad utility
(43) the mode technology
(44) public services
(45) value Added Package
(46) Webcam driver
(47) Lan Wireless driverHello
Order to install right WXP for your laptop model is as follows:
Windows XP Sp3
Synaptics Touch Pad Driver 15.0.8.1
Realtek 6.1.7600.30111 card reader
SW 9.1.1.1024 Chipset installation utility
Intel Management Engine Interface 6.0.30.1203
Driver Intel Rapid Storage Technology 9.5.7.1002
Display driver
Driver Intel Turbo Boost Technology 1.1.1.1007
Conexant Audio Driver 3.80.0.0
ATI HDMI Audio Driver 5.18.0.5502
Atheros LAN Driver 1.0.0.36
Battery Bluetooth for Windows by Toshiba v7.10.12 (T)
TOSHIBA Software Modem 2.1.77 (SM2177ALD07)
Conexant 7.80.2.0 Modem driver
Wireless LAN driver
ConfigFree 5.90.18
Common module TOSHIBA v1.0.0.6
TOSHIBA Power Saver 7.06.00.U
TOSHIBA Hotkey Utility v1.0.0.1
TOSHIBA v3.37.4300 controls
Utilities TOSHIBA V1.0.0.3
Utility TouchPad On_Off v1.0.0.1
TOSHIBA HDD Protection 2.3.0.0
Smooth view TOSHIBA 2.0.0.25According to your list, you also downloaded stuff from Win7.
For example: where did you find package of added value for WXP?Please be careful with this stuff.
-
Aspire windows oem recovery 8 v3 - 571g
Hello
Please I need help with the recovery of windows 8.
the problem is that once I have partitioned my hard drive to 500 GB in 4 drives I not was able to make failure to backup through management of acer (not default configuration of HDD) recovery or use Bios acer D2D (nothing happens when you press alt + f10) to reset my computer.
Recovery Windows, button Reset (13,78 GB) partition is intact. I can't make active probably due to TPG. yesterday I played to find a cure and got my bootloader corrupt and spent the whole day he recover. If someone wants to know how to fix it go to this link http://www.qliktips.com/2012/11/fix-windows-8-boot-issue.html.
So if anyone can help me to use this partition to reset push button and link it to the recovery of windows, it will be great.
PS .around two years back I used a toshiba satellite l-655 and inserted intall.wim file somehow in the recovery environment and got the default settings and recovery works, so there may be a way to do that too.
Please reply if anyone knows a workaround solution.
I found the ground after a lot of digging in the files from partition reset button.
Use diskpart to rename the partition PBR than R and its type like ebd0a0a2-b9e5-4433-87 c 0-68b6b72699c7. now, you can restore the system and can make a recovery disk. do not know D2D.
-
My lap top began to play up with the updates of some files windows service pack 3.5 have been introduced, and I tried to speed things up with the removal of some two files old service pack. He struggled with the race, the trash/delete was misplaced, files have disappeared behind a fictitious system restore. I tried to run Mr. Fix it and get the icon cache is indicated as an error of changing icons and does not repair. I'm doing Defrag disk to re - configure the HDD without losing valuable records and continue to get a size of insufficient volume of about 12% to reconfigure the hard drive. I tried to remove some files more since then and things are run faster by removing a lot of material from google. But the restoration of the system was not available to provide an overview of available programs. Is it because that the guest user is the amount of space drive, help or I may need to get a different system not running windows?
Hi studiosSorohan melodeon,.
Follow these methods.
Method 1: Run the fixit of the article.
Difficulty of Windows system performance slow computer problems
http://support.Microsoft.com/mats/slow_windows_performance/
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Startand then click run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article.
Maintenance tasks that improve performance
http://Windows.Microsoft.com/en-CA/Windows-XP/help/Setup/maintenance-improve-performance
-
My Windows XP SP3 will not start. Since the installation of SP3, I have installed all MS suggested updates. My W - XP SP3 has worked fine until
After I installed (the 01/05/11) a set of updates to 8 MS, who are KB: 2296199, 2423089, 2436673, 2440591, 2443105,.
2467659, 2443685 and 890830.
Once the 8 updates were installed, I allowed my computer to restart. The bios load, but Windows introduced the error message:
"NTLDR is missing. Press CTRL + Alt + Delete to restart. "I did it. The bios is restarted, the W - XP loading screen appeared, he flickered
Once, the screen went white for 5-6 seconds, the heads of the parked hard drive, hard drive, quit spinning and the computer
restarted. This same sequence - the bios boot, load W - XP and flicker, white screen screen appearance of 5-6 sec., HDD arrested, and
restarting the computer - resurfaced and he continued this process cycle until I turned off the computer. I am referring to what the
'cycle start abandoned.' It happens every time I try to start on this hard drive; It goes indefinitely until I power off of the computer.
I use two hard drives. The primary drive ("HDD320") is 320 GB. It has a partition to the boot/system/application files and 3
partitions for the data files. The secondary drive ("HDD80") is 80 GB, and is used only for data backup.
Here's what I tried to correct this anomaly:
1. last checked - it has not corrected the fault.
2. start in SafeMode - many Safe Mode files, the system stopped for 6 to 8 seconds, and abandoned start-up cycle began.
3. disconnect the secondary drive - I disconnected HDD80 and changed HDD320 jumper on the "single" position, then changed the
BIOS accordingly. The abandoned start cycle began. (Of course, whenever I make changes in the HARD drive, I always: Turn off the power; variation)
Configuration of HDD jumpers and cables; "and after turning on the power, change the bios to match changes in the HARD drive).
4. boot from the CD W - XP and start the Recovery Console, I started the repair feature. He did his thing and restarted the
computer. The abandoned start cycle began.
5. change hard drives - I disconnected HDD320, installed a hard drive 2.5 GB ("HDD2.5") and then to install W - XP on HDD2.5. W XP
has HDD2.5 successfully started.
6. check the defective HARD drive: I connected HDD320 as slave and rebooted. All the folders and files shown in the indexer (Explorer) as they
must and data files, which do not request additional s.w., open in a satisfactory manner.
7 uninstall updates of 8 MS - I uninstalled KB2296199 and KB2423089 by invoking the spuninst.exe executable in each
\WINDOWS\$NtUninstallKB*$\spuninst\ file two updates. Windows found time uninstalls as successful, but I don't have
find out if they were really effective, because the updated files to uninstall weren't on the C:\ drive, i.e. were spuninst.exe
wait until they are. The updated files are on HDD320, which, as a slave, is listed as drive F:\.
I uninstalled KBs, 2436673, 2440591, 2443105, 2467659 and 2443685 manually, in accordance with the instructions in the file spuninst.txt
in each folder to uninstall. It has been/is no uninstall for KB890830 folder, and I makes no attempt to change this update.
8. I disconnected changed HDD2.5 HDD320 Single, then restarted. The abandoned start cycle began.
9 research - I changed HDD2.5 - Master and HDD320 - Slave discs, and then I went to the MS site and found the two descriptions of
the issue instructions to correct. I followed the instructions in the thread
MalkeleahMVP, Moderator, on Friday, July 23, 2010 12:13. They are (in part):
> To correct the error "NTLDR is missing", boot from the XP CD and make R for Recovery Console. At the command prompt, type:
> COPY D:\i386\ntldr C:\ [Enter]
> COPY D:\i386\ntdetect.com C:\ [Enter] [a file that may be also missing] and then rebuild the boot.ini for boot configuration file oftype:
> Attrib-h-r-s C:\boot.ini [Enter] [if not found pass the following line]
> DEL C:\boot.ini [Enter]
> BootCfg /Rebuild [Enter]
>
> Remove the XP CD and hopefully start Windows.10. I disconnected changed HDD2.5 HDD320 Single, then restarted. This time, I got an error of Boot.ini file.
11. change of disks, had Boot.ini and BootCfg info.
12 fix Boot files - disconnected HDD2.5 and HDD320 changed to Single, began with W - XP CD and accessed the recovery
Console. I ran Bootcfg/copy and Bootcfg/rebuild.
13. restart the computer to start from HDD320. The abandoned start cycle began.
14. I've changed disks HDD2.5 - Master and HDD320 - Slavic, and then copied the HDD2.5 boot.ini file to HDD320.
15. I disconnected changed HDD2.5 HDD320 Single, then restarted. The damned start abandoned cycle began.
I'm out of ideas. Please guide me in this mess of a fastening so that I can boot into W - XP SP3 of HDD320.
try running a chkdsk /r and fixboot and fixmbr via the recovery console.If no joy, then you will simply need to maybe reformat the drive and do a clean install of the OSso if your backups are viable, you can update your system with them.However, if the problem you are experiencing is the result of malicious programs, then you will have to give up your backups as they have checked the infections.
--
db·´¯`·...¸><)))º>.)))º>
"MarcoSolo" wrote in message news: 0dbef24a-73d 1-4254-a6da-a8a248a4933c...My Windows XP SP3 will not start. Since the installation of SP3, I have installed all MS suggested updates. My W - XP SP3 has worked fine until
After I installed (the 01/05/11) a set of updates to 8 MS, who are KB: 2296199, 2423089, 2436673, 2440591, 2443105,.
2467659, 2443685 and 890830.
Once the 8 updates were installed, I allowed my computer to restart. The bios load, but Windows introduced the error message:
"NTLDR is missing. Press CTRL + Alt + Delete to restart. "I did it. The bios is restarted, the W - XP loading screen appeared, he flickered
Once, the screen went white for 5-6 seconds, the heads of the parked hard drive, hard drive, quit spinning and the computer
restarted. This same sequence - the bios boot, load W - XP and flicker, white screen screen appearance of 5-6 sec., HDD arrested, and
restarting the computer - resurfaced and he continued this process cycle until I turned off the computer. I am referring to what the
'cycle start abandoned.' It happens every time I try to start on this hard drive; It goes indefinitely until I power off of the computer.
I use two hard drives. The primary drive ("HDD320") is 320 GB. It has a partition to the boot/system/application files and 3
partitions for the data files. The secondary drive ("HDD80") is 80 GB, and is used only for data backup.
Here's what I tried to correct this anomaly:
1. last checked - it has not corrected the fault.
2. start in SafeMode - many Safe Mode files, the system stopped for 6 to 8 seconds, and abandoned start-up cycle began.
3. disconnect the secondary drive - I disconnected HDD80 and changed HDD320 jumper on the "single" position, then changed the
BIOS accordingly. The abandoned start cycle began. (Of course, whenever I make changes in the HARD drive, I always: Turn off the power; variation)
Configuration of HDD jumpers and cables; "and after turning on the power, change the bios to match changes in the HARD drive).
4. boot from the CD W - XP and start the Recovery Console, I started the repair feature. He did his thing and restarted the
computer. The abandoned start cycle began.
5. change hard drives - I disconnected HDD320, installed a hard drive 2.5 GB ("HDD2.5") and then to install W - XP on HDD2.5. W XP
has HDD2.5 successfully started.
6. check the defective HARD drive: I connected HDD320 as slave and rebooted. All the folders and files shown in the indexer (Explorer) as they
must and data files, which do not request additional s.w., open in a satisfactory manner.
7 uninstall updates of 8 MS - I uninstalled KB2296199 and KB2423089 by invoking the spuninst.exe executable in each
\WINDOWS\$NtUninstallKB*$\spuninst\ file two updates. Windows found time uninstalls as successful, but I don't have
find out if they were really effective, because the updated files to uninstall weren't on the C:\ drive, i.e. were spuninst.exe
wait until they are. The updated files are on HDD320, which, as a slave, is listed as drive F:\.
I uninstalled KBs, 2436673, 2440591, 2443105, 2467659 and 2443685 manually, in accordance with the instructions in the file spuninst.txt
in each folder to uninstall. It has been/is no uninstall for KB890830 folder, and I makes no attempt to change this update.
8. I disconnected changed HDD2.5 HDD320 Single, then restarted. The abandoned start cycle began.
9 research - I changed HDD2.5 - Master and HDD320 - Slave discs, and then I went to the MS site and found the two descriptions of
the issue instructions to correct. I followed the instructions in the thread
MalkeleahMVP, Moderator, on Friday, July 23, 2010 12:13. They are (in part):
> To correct the error "NTLDR is missing", boot from the XP CD and make R for Recovery Console. At the command prompt, type:
> COPY D:\i386\ntldr C:\ [Enter]
> COPY D:\i386\ntdetect.com C:\ [Enter] [a file that may be also missing] and then rebuild the boot.ini for boot configuration file oftype:
> Attrib-h-r-s C:\boot.ini [Enter] [if not found pass the following line]
> DEL C:\boot.ini [Enter]
> BootCfg /Rebuild [Enter]
>
> Remove the XP CD and hopefully start Windows.10. I disconnected changed HDD2.5 HDD320 Single, then restarted. This time, I got an error of Boot.ini file.
11. change of disks, had Boot.ini and BootCfg info.
12 fix Boot files - disconnected HDD2.5 and HDD320 changed to Single, began with W - XP CD and accessed the recovery
Console. I ran Bootcfg/copy and Bootcfg/rebuild.
13. restart the computer to start from HDD320. The abandoned start cycle began.
14. I've changed disks HDD2.5 - Master and HDD320 - Slavic, and then copied the HDD2.5 boot.ini file to HDD320.
15. I disconnected changed HDD2.5 HDD320 Single, then restarted. The damned start abandoned cycle began.
I'm out of ideas. Please guide me in this mess of a fastening so that I can boot into W - XP SP3 of HDD320.
DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann
-
WRT320N and internal VPN server
I just bought a router Linksys 320N to replace another competing router.
I am trying to connect to my VPN server from outside my network. I have the external IP to my network. I install the new router 320N, like the old router.
the dmz ip value the vpn server's internal ip address
set forwarding port in 1723, the two, internal ip address of the vpn server
I have a way to test the vpn when I'm inside my network. So I can look at the VPN server to connect and see the request to come in the server happens to expire with the Linksys 320 N hung.
If I have the old router plugged, the vpn connects.
The above settings are the same settings I have on both routers.
Help, please.
I don't think that the problem is CHAP. I think the problem is the GRE tunnel. Check with a sniffer network on the server and the client can help see if the ACCORD is sent at one end but never received at the other end.
1 make sure that the options under the Security tab of passthrough are all turned on.
2. try different forwarding configurations, for example only the DMZ host configuration but no port redirects. Configure the single forward TCP 1723 port and no DMZ host. See if it makes a difference.
Maybe you are looking for
-
Satellite C660 - 1J6 Win7 installation failed - disk HARD disabled controller
IV received a toshiba satellite c660-1j6.The problem is that the hard drive has been deleted (including the back upward). I don't have any of the Toshiba backup disks, but I have new copies of win 7 home prem and xp pro. However when I try to install
-
Portege Z830: Keys to eco, presentation and on / off do not work
Hello on my new Z830-10J, key Toshiba for eco, presentation in power does not work - no reaction. Thanks for any helpful answers.
-
Problems starting Tecra S3 - cannot find HARD drive
Toshiba Tecra S3 runnning windows XP fully updated last week. I tried to restore my S3 with a picture made using Acronis, but whenever I start using the disk of the computer is unable to find the hard drives. After several failed attempts, I opted to
-
Update <; CLOSED >; andriod lollipop
I want to have the e test of impregnation for my 1st gen of motorcycle!
-
Hi all I want to get the list of Classes of the classifier color file. I used IMAQ classifier read of color, but it does not give the list of Classes. I'm using Labview 2011. Help, please. Thanx