Reference cell transform in value when submitting with Smartview

Similar Questions

• Open FPGA references change to no. target when compiled with executable in time real start

  Hello again you useful forum fans!  I have a problem that I hope someone can give me a hand with.

  I have a project that has a Windows component and a component of the target in real time, that are running on a hypervisor type NI PXI-8110 system.  Communication both sides between them using shared variables.

  On the real-time side, I have four FPGA targets who are reading and writing various analog and discrete inputs and outputs.  I several periods loops which opens a reference to one of the FPGA targets during the first call, then pass this reference in several subVIs that read and write to panels prior to the FPGA.  The loops the FPGA reference thus made available and reuse it in the next iteration through the shift registers.  Each FPGA target has only a single reference open to him.  One of the loops is using the FPGA reference directly and does not pass it in any subVIs.

  It all works very well in the development environment, I can read and control inputs and outputs FPGAS via the front panel of the application of the side Windows.  It also works very well if I start the game real time in the development environment, and run the code of windows as a stand-alone executable file.

  However, when I compile the code in real-time in an executable startup and deploy it to the target, it does not work.  I enabled debugging on the executable, and when I connect to it via the operation-> debug executable in the menu, I see an arrow broken at execution.  Further investigation shows that each of the four open screw reference FPGA is now empty, the text under them is "no target" and the thread for reference on their part to my first Subvi is broken.  I need your help to understand how to operate as it does in the development environment.

  I followed the instructions of these two knowledge base articles to compile and download the bitfiles FPGA on the FPGA target and execute on start or restart:

  http://digital.NI.com/public.nsf/allkb/39795847AC67296D862575FB0046944F

  http://digital.NI.com/public.nsf/allkb/BC513C2A0DC29C89862574BF0002B0B9?OpenDocument

  Open FPGA reference screw are configured for the FPGA to build specifications that I created for each target in the LabVIEW FPGA project.

  I called technical support, NO phone, and yet were able to determine this one out, so additional "brownie" points if you do!  I would offer you the same no detailed screenshot that I have (I can't give more detailed code out because its owner, unfortunately), but apparently the forum doesn't like my image file, as I can't seem to load.

  Please let me know if you have any ideas regarding what is happening!  I appreciate it.

  Jon,

  I'm always up for the challenge.  Have you tryied recompile the FPGA VI that accesses the RT VI?  I also suggest to try and open the bitfile instead of the FPGA VI.  You run in dynamic mode (this is not a suggestion, it's just a question)? There is no difference if you try to open the FPGA VI reference outside the while loop, then past the reference to use inside the while loop without shift registers, then close the reference to the FPGA VI outside the while loop?

  Let me know if these suggestions makes no difference.

• How to export data from the table with the colouring of cells according to value.

  Hi all

  I use jdeveloper 11.1.1.6

  I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?

  You can find us apache POI-http://poi.apache.org/

  See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

• Transform problems of effect when used with the depth of the 3D layer

  Here is my set upwards.

  I have PreComp with graphics any illustrator with active continuously rasterized layer.

  This graph has a reflection in it. I was thinking by applying the effect processing, offset setting to-100 and by setting the anchor point.

  Regarding the graphics move from left to right (X, Y) there is no problem and anchor point is in its place.

  As soon as I do the 3D layer and start changing the values of depth thinking begins to jump around.

  My guess is - it happens that point because of anchorage is a constant value and because the thinking is based on its value it does not follow the base of the graphics. Purhasps it is a snippet of code to be used to bind the value of the anchor Point to the Zoom value? Adjustment of the values of anchor with keyframes turned out to be too difficult.

  In other words, I like to keep thinking at a constant distance from the base of the graphic part and once the relocation of graphics on or in the reflection does not follow.

  I précomposé this graphics and it imported into the new Compostion and applied movement XY and Z using the camera and Null layers. It was the same effect and reflection did not stick to the base of the graphic.

  I need to keep the collapse processing enabled on all consecutive Comps/PreComps to ensure that the vector art makes to high quality.

  What would be a good way to make a reflection of a 3D/preComp layer in the model where the movement controlled with layers of continuously active camera and Null, with the Transformations of rasterized/reduce?

  I'm with Mylenium on it. Your concept is inappropriate and you do it is much too difficult. Just put the anchor at the bottom of your reflection, then resize it to 100 in y [100, -100] can do the two 3D layers and implemented a matte degraded on the reflection layer.

• How to ensure that the value of a control (for example double) initializes the last value when the VI has been closed?

  I use a cluster as a control. I would like to double in this control to automoatically values to fill their last values set when the VI is opened or accessed for the first time. It would be great if someone could point out for me. Thanks in advance!

  In my opinion, the configuration files are the easiest method and the best.  Simply save your last values to the file when your code ends.  At the beginning of your code, to read the file and fill in the controls with the values read.  With the configuration files, the section name can be the name of the cluster, and key names can be control names.

  I know OpenG has some pretty nice to do, but I prefer to use the native functions OR when I can.  When porting to a new system, there is no need to copy any additional screws library (OpenG library).  The native DV come with Labview.

• What does "PAGE_FAULT_IN_NON_PAGED_AREA" usually mean when associated with a BSOD?

  The question is in the title:
  That the following sentence usually means, when associated with a BSOD?
  "Failure of Page in the nonpaged area".
  Since the very little I know of free software, this would mean that a pointer memory was bad, it refers to a location memory wrong. Is it so?
  Thanks in advance,
  concerning

  Hello

  It was an accurate description of the BCCode: 50 error you encounter.

  Get rid of the RAID will probably do the trick. Good plan. However why we try to solve
  a problem on a computer you can is no longer trying to fix yourself?

  BCCode: 1st 0x0000001E

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory Inc. of the Windows Driver Kit.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  Hardware incompatibility. First of all, make sure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.

  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  Good luck.
  

  Rob - bicycle - Mark Twain said it is good.

• change the values of 'choiseListe' with javascript

  Dear Sir

  Is it possible to change the values of 'choiseListe' with javascript.

  Example they have a choseListe:

  Country / / / values

  United States us

  France fr

  Sp Spain

  When he clicks in a botton I whant to change this choceListe:

  Country / / / values

  My Morocco

  PT Portugal

  ............

  Thank you

  Hello

  Drop-down lists and drop-down menus can be scripted against without much to safely.

  You would need something like that in the click event of the button:

  listbox1.rawValue = null; //clear previous choice
  listbox1.clearItems(); //clear the list items
  listbox1.addItem("Moocco", "ma"); //add new list items
  listbox1.additem("Portugal", "pt");
  

  Hope that helps,

  Niall

• How to compare, present value: block.text_item with the value of data

  Hello
  Could you please tell me
  How to compare the current value: block.text_item with the corresponding database column value.
  I use form 10g
  
  It has block and there is a text element in this block.
  When I run the form and query the block (in a table), the: block.text_item show me any value it in the database.
  Now I add value in the: block.text_item to the existing value.
  
  now
  the: block.text_item contains the old + new added value
  While
  the database table contains the value 'old '.
  
  Now, with a click of button, I want to know what value I added
  
  Please can you me, is it possible without writing a select query?

  Hello

  Now, with a click of button, I want to know what value I added

  So you're saying always user will bring added value to the existing value. Because it will fail in a case. Let's say that
  Database value is = ABCD
  The user opens the form and he took the D and write E and now value is ABCE and length is always the same 4. There is therefore no need to add.

  In any case, you can know that the value of database at run time, there is a property for the element called DATABASE_VALUE. She gives the value that is in the database while you run the form before save. and you can use it like that...

  Trigger = WHEN-MOUSE-DOUBLE-CLICK on item level
  DECLARE
    vItemValue DATATYPE; -- Set the data type according to your desired field.
    vValueAdded DATATYPE; -- Set the data type according to your desired field.
  BEGIN
    vItemValue:=GET_ITEM_PROPERTY('ITEM_NAME',DATABASE_VALUE);  -- It will return you the database value in vItemValue variable.
    IF LENGTH(vItemValue)>LENGTH(:FORM_ITEM_NAME) THEN  -- It mean something change or added
      vValueAdded:=SUBSTR(:FORM_ITEM_NAME,LENGTH(vItemValue)+1);
      MESSAGE('Added value is : '||vValueAdded);  -- It will show you the added value.
    END IF;
    -- now suppose you want to show the old and new value in message not the added one
    -- Then no need of IF condition. You can just use message like this
    -- And i would prefer to use like this way
    MESSAGE('Old Value : '||vItemValue||'  New Value - '||:FORM_ITEM_NAME);
    MESSAGE('Old Value : '||vItemValue||'  New Value - '||:FORM_ITEM_NAME);
  END;
  

  Hope that's clear.

  -Clément

• The text element values value when the user clicks a report line.

  The text element values value when the user clicks a report line.
  
  I have a report based on the EMP table and two elements P911_EMPNO, P911_DEPTNO. When I click on one of the lines the EMPNO and DEPTNO is copied to the text elements.
  It works fine if I leave the EMPNO and DEPTNO as SHOW report, but if I then these clear values are not retrieved the report form (my javascript is very limited).
  
  I need a method to retrieve the data hidden in the report and display in the text without the reposting of the page elements.
  
  Also, would be nice if the line was highlighted until another line is clicked but especially is my priority.
  
  Elements
  P911_EMPNO, P911_DEPTNO (field of disabled text, saves the State)
  
  Report
  Select * from emp using the model of report below.
  
  Custom model.
  standard_report_cust_P330-a copy of the standard report with a change model.
  BEFORE EACH LINE
  < tr onclick = "selectRow (this);" #HIGHLIGHT_ROW # >
  
  
  * Javascript in the Page Header.*
  < script language = "JavaScript1.1" type = "text/javascript" >
  function selectRow (p_tr)
  {
  var l_deptno = p_tr.childNodes [8] .innerHTML;
  var l_empno = p_tr.childNodes [1] .innerHTML;
  html_GetElement ('P911_DEPTNO'). Value = l_deptno;
  html_GetElement ('P911_EMPNO'). Value = l_empno;
  }
  < /script >
  
  If anyone has any ideas. Thanks, Pete

  Hello

  When you use this type of report model, you actually control on where the column values are used - and they can be used several times.

  For example, a setting of 'Model line 1' for one such model could be:

  <tr>
  <td class="c1">#1#</td>
  <td class="c2">#2#</td>
  <td class="c2">#3#</td>
  <td class="c2">#4#</td>
  <td class="c3">#5#</td>
  </tr>
  

  #1 # fact refers to the data in the first column, #2 # for the second and so on. So you can do:

  <tr onclick="javascript:dosomething('#1#','#2#');">
  <td class="c1">#1#</td>
  <td class="c2">#2#</td>
  <td class="c2">#3#</td>
  <td class="c3">#5#</td>
  </tr>
  

  For example, by clicking on the line would trigger the dosomething() function and pass in that the values of the first and second columns. Also note that the 4 # does not appear now - this column is 'hidden' (but note that you must check the box to show the column)

  Andy

• How to complete the list of values when loading screen

  Hi all
  
  I have a list of values based on another field (ANOTHER_FIELD).
  
  for example
  Select the value d, r
  from table_name
  where id =: ANOTHER_FIELD;
  
  ANOTHER_FIELD has a default value.
  
  But when the screen is opened to the list of values does not have the default value and the values list is empty.
  Just when it is filled with submission of the form, the list of values.
  
  Please tell me how can I complete the list of values when loading screen.
  
  Thank you!

  Hello

  It depends on how you have defined the default value for ANOTHER_FIELD.

  I always set my default settings using a calculation, that runs before header, on the element that defines the value using a static assignment, but to ensure that the calculation is dependent on the order of the day being NULL - try this

  Andy

• the video is the future. How do videos PLAY when sharing with others?

  How to make video content on game Keynote when shared with others.

  Hey dominiek releases,

  Thanks for this info and choosing the communities Support from Apple. I know how important, given your speech work the way you want when share you!

  If I understand correctly, you want the video to play automatically. Good news is that it looks like it is possible!

  «When the media begins to play in Keynote: check the box "start the media when the click on" to start playback when you click.» If you want the media to play automatically when the slide is displayed, uncheck the box.

  Add video and audio - speech help

  See you soon!

• Tecra M2 shows 598 mhz max when testing with speedstepping

  Hi all, I have a Tecra M2 I bought from a friend.

  The only thing I have a problem with is the speed of the CPU (Pentium M). He says it's 1800 mhz but shows only 598 mhz max when testing with speedstepping. I looked all over for an answer, usually being updated BIOS (I) change the settings in power options to "always you" (I) still none of these options work, I told him to check in the BIOS to see if speedstepping is activated and I don't see an option.

  I know that the laptop remains at 600 mhz for economy of energy etc., but it goes ever higher when stressing with many applications etc.. Please help I am tearing my hair out trying to fix it. PS while typing that I checked the application of speedstepping and he says that the CPU is clocked at 144 mhz!

  Thanks Simon

  Hello

  If the processor remains on 598 Mhz and does not run faster then, I suppose that an updated firmware not the ASP technician
  In cases like replacement motherboard firmware must be updated
  If this will not happen then the CPU only runs at ~ 600 Mhz.

  Update the firmware ONLY by ASP I think you need to call the guys for the manipulation of the Fryer!

• WSN-3212 or NI WSN 3202 when loaded with VI target with

  WSN-3212 or NI WSN 3202 when loaded with a new firmware using option "Add LABView WSN target", cannot re connect with the gateway ethernet OR WSN - 9791. In MAX, the quality of the link state is "lost Signal".

  Basically, I tried to change the sampling in the sample interval ""case structure, then built the VI and deployed on two WSN nodes. " They show the status of the download of the firmware and the LABView also shows the message 'successfully deployed", but then, knots just to start scanning and never connect again.

  Please help in this regard.

  Hello binarystar105,

  When you have downloaded the new firmware, did you follow the steps described in this article?

  How to upgrade the Firmware on my NI WSN gateway?

  http://digital.NI.com/public.nsf/allkb/CF6241F5F849FC7086257909008327C5?OpenDocument

  Also, what version of firmware you currently have?

  What version of the LabVIEW WSN Module work?

  If you look at the properties of the node of your window from the LabVIEW Project Explorer, can set you the tab node sampling interval?

  You may already familiar with this material, but I found the following white paper to be extremely useful when I started working with WSN:

  Getting started with wireless sensor networks of NOR

  http://www.NI.com/white-paper/8890/en/

• How to measure how long a Boolean value is high with thick County?

  I acquire the impulse response of a parallax Distance sensor, but I I don't know how to measure the number of features that this signal is high (the time of the input signal is high is proportional to the distance). I would like to reset the counter thickness when this signal is low. is this possible? Y at - it another option?

  Thank you...

  for (imstuck) wrote:

  You will need to adjust some if you want an indicator of up-to-date at all times.

  Here is a very minimalist version which updates the timer continuously while the switch is on and holds last value when the switch is off. Try it!

  

• Update and change the values when VI is running

  Hello everyone! I have a digital control slider and I want to be able to change and update the value when Vi is running. Can I use the property for this node?

  If it is a CONTROL (no), then it is for the user to set the value via mouse / keyboard.

  You can still set the value via the NŒUD of PROPERTY or the LOCAL VARIABLE for ALL controls.

  What difficulty do you observe?