Reference Dell T610 vmware running

Similar Questions

• Reference Dell T610 PERC 6i - very slow RAID rebuild

  Hi all, I have a DELL T610 with a Controller PERC 6i with 4 x 1 TB SAS 7.2 K disks configured as a RAID6. 1 of the drives has failed, I installed the new drive, but reconstruction is only 44% after 36hrs! Why is it so slow? Any ideas would be greatly accepted.

  RAID 6 is well known for its performance of poor\slow. This is the only function is to be safer than RAID 5, not to be fast and cheap.  With parity RAID, to rebuild the whole picture.  They have been known to go for a week or more before they are finished, according to the size and speed of players.

  Kind regards

• Reference Dell optiplex 320 running windows xp lost all sounds

  Recently, I lost all sound, I tried to uninstall & reinstall my audio drivers

  but continues to come up with the error code 39, when I try to reinstall or update the drivers

  It is also in place with the wizard is unable to find a better match for your hardware

  the currently installed software? All popular solutions

  It's no big thing to go on so only ideas in time...

  A 39 error means that your drivers are somehow corrupt.

  According to Dell, your audio drivers are here:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&SystemID=PLX_PNT_320&OS=WW1&OSL=en

  Since there is only one choice for the audio drivers, when you got the drivers you trying to install?

  If this is not the place, which is the first place you should look for drivers.

  I uninstall the old driver first (from Device Manager), download the new drivers and run the downloaded driver. File EXE from the site of Dell and make what is said.

  If your system uses to work properly, what do you think has happened since the last time, he did not work properly?

• Reference Dell T610 with 5 hard drive problem (5x2TB) while create RAID 5 with all the HARD drive. :(

  Dear Sir.

  While I have already configured the RAID 5 with 5 disks, then the OS (windows 2008 R2) installation step I saw 2 separate partitions. and can I install it on the partition with only 2 TB. Another, we can't. So during my installation completed OS, then I can use only 2 TB, for another volume is about 5 TB can't do anything. Can I do the RAID 5 with 5 disks (10 TB)?

  I wait your helpful to my set.

  Thank you.

  silamay

  This is new server, there is not any data yet so I can reinstall. What I want is that I just want to RAID 5 until I started my DC project. I already look for how to convert to GPT, but I'm not at all.  I know that I can't convert GPT as the OS in the same disk but that is because I try to configure RAID 5 and OS, but while over OS I do not see another 5 to just see only 2 TB.

  I don't understand most of what you wrote.  You must activate the UEFI (below), then convert to GPT before installing Windows.

  silamay

  How can I install on a UEFI system?

  The T610 supports UEFI, but must be allowed.  Start the BIOS (F2) Setup and change the boot mode in the UEFI instead of BIOS/inheritance.

  Your alternative is to create a RAID 5 using all disks, but the definition of the size as something as small as 2 to, then another RAID 5 with space remaining.  Each table will be displayed in Windows as a separate 'drive' - you can then install normally in the smallest 'drive '.

• Reference Dell R710, Dell and VMware VAAI MD3200

  Hi guys, we have 3 x Dell R710 hosts running VMware ESXi hypervisor v5.1. Our SAN is via Dell MD3200 Direct attached storage. We have activated the option of High Performance. My question is about VMware VAAI. In particular, the recommendation of VMware: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1033665 it says: "For more information on support VAAI in a particular storage group or required firmware levels, contact the storage array provider." So I'm wondering: is VAAI supported (or not) with the MD3200... and otherwise: should I be deactivation of VAAI settings as recommended by VMware? What are the potential implications for the performance of deactivation of VAAI... or support DO NOT turn it off? Thank you, Steve

  Indeed, you are using a fairly old firmware. The most recent is 07.84.53.60.

  To be able to upgrade to this version, you will need a version quite familiar of the MDSM. I would say to download 4.1.2.29 or later, which is 5.0.0.70. All servers Windows and Linux (not VMware or XenServer) server that manage and/or are connected via iSCSI SAN should have their MDSM, updated software before upgrade you the firmware on the raid on the SAN controller.

  RAID controller firmware: www.dell.com/.../powervault-md3200

  Latest resources DVD (5.0.0.70): www.dell.com/.../powervault-md3200

• Reference Dell upgrade memory T610

  I have Dell T610 with a CPU E5506 server. I want to get out all of the memory from the server and install the new memory 4 grade 8Gb 2Rx4 RDIMMS DDR3 1333 MHz LV (Snpp9rn2c / 8g).

  Will be ok? I got 32GB? Assorted memory work correctly with CPU E5506?

  The 8 GB memory you bought is a low voltage given double revenu3 type double row of double error correction in modules of memory in line with Government (on the address lines?). They are compatible with your T610 and should work without problems (assuming that there are no unknown hardware failure).

  What slots place you the RDIMMs will depend on you specify settings of the BIOS memory mode. If I understand correctly, this in turn can affect the speed of memory.

  I would 1st set BIOS memory mode 'Advanced ECC' and place your RDIMS in the 4 closest slots of CPU1 leaving farthest 2 empty slots. Then I would run a memory benchmark to check performance.

  You could also try changing the mode memory BIOS to "Optimized" and place the RDIMMS 3 white slots with 4th in the black slot more away from the CPU (marked A4). Then run a cue memory point and compare with the above configuration.

  Each configuration should give you 32 GB.

  You don't mention this type, the size or the number of DIMMs you had previously installed in your system, it is therefore impossible to tell if they can be reused or how. But since you mention that you replace them, I guess that's irrelevant anyway. However, if your old memory was UDIMM type (without buffer only = no records on the data lines), it's safe to say that you can not mix with of the UDIMM RDIMMS. If you old memory was of RDIMMS you can reuse them (but if they are not the type of low voltage, you will get the benefit of low voltage of your new memory because it will work under tension will use and therefore consume more power than would otherwise be the case).

  Good luck.

• Reference Dell 1700 crashed and I have no backup

  Reference Dell 1700 crashed without backup whats a girl to do
  
  

  lost all programs can run does not help

  Reference Dell 1700 crashed without backup whats a girl to do

  
  

  lost all programs can run does not help

  Reinstall Wndows.

  Reinstall all your programs from the original media or downloaded files you have saved on an external drive.

  Reinstall all your data from the backups that you made on an external drive.

  If you have not, you're out of luck.

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Reference Dell A960 printer

  I'll upgrade to a new computer Windows XP 8.  My Dell A960 printer work with Windows 8?  I checked for Dell drivers and they are only available up to XP.  Windows 7 and Windows 8 are not available.

  Thanks for your help Pudgy!

  sevenzz,

  There is not any Windows 8 drivers for this printer.

  You can try this, it may or may not work...

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell A960 All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications. If you do not install an antivirus program, Windows Defender will be the default virus program. Try to read...

  Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• Reference Dell 968 AIO, Windows 7 on Dell Studio XPS - messed up

  I have a Dell 968 AIO which was printing on the use of pilots (probably the original) on my Dell XPS Studio 8000 Win 7 pc, a week ago. He stopped printing a few days ago.

  I assumed the problem was the drivers and not the ink. So I tried to install the new drivers. It does not solve the problem. Indeed, the new drivers would not install completely. When he got to the last step of the installation the Setup program just hung. More on this in a minute.

  I bought new ink cartridges and allowed me to test the 968 printer and it prints very well now.

  However, when I tried to print a document from the computer.

  I tried to uninstall the old drivers and reinstall new drivers. Unfortunately, I got the USB cable is plugged. So I have messed up, and it would not print. He could not "locate the file. I tried after I unplug the USB stick and a running registry cleaning. Still no luck, but worse, I noticed that the installers had left a lot of luggage around.

  • There is a folder c:/dell/drivers/986, which seems to have a lot of the old drivers.
  • There was a folder c:/program files (x 86) /Dell AIO Printer 968
  • And there is also a folder c:/program files (x 86) (x 86) /Dell 968 AIO Printer.

  I followed the steps for a clean uninstall, and it is where I am now. However, there a lot of carrying files around in Dell matter folders on my hard drive.

  I'm sure I made a complete mess of things, can anyone help?

  Wendy

  Wendy,

  When you reinstalled the operating system, have you installed the desktop system software / laptop (as appropriate) and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Once you have corrected, then we can work on the printer.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 968 & 968w all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Reference Dell R210 II - update the Firmware on Centos 6

  Hello

  I have several dell servers connecting a mix of OS linux centos 5/6 for windows and xen etc.

  I have run it on every Linux machine to install the dell tools:

  wget - q - O - http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash
  yum install srvadmin-all firmware-tools - y
  yum install $(bootstrap_firmware) y
  srvadmin - services.sh status
  / opt/dell/srvadmin/sbin CD.
  update_firmware - Yes

  on centos 5 is very well and on some centos 6 machines too. However, a new server got us set up this week, the following error occurs, I want to know how to solve this problem, so I can perform upgrades in the usual way via command line:

  Root@server[/opt/Dell/srvadmin/sbin]# update_firmware - Yes

  Inventory of the currently running system.

  Search the directory for storage of the available BIOS updates...
  Checking the BIOS - 2.2.3
  Available: dell_dup_componentid_00159 - 2.2.3
  Did not find a new installation package that meets all the checks of the facility.
  Verification of rev NetXtreme II Gigabit Ethernet 20 (em2) - 7.2.20 BCM5716
  Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Check the system BIOS to PowerEdge R210 II - 2.2.3
  Did not find a new installation package that meets all the checks of the facility.
  Verification of rev NetXtreme II Gigabit Ethernet 20 (em1) - 7.2.20 BCM5716
  Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8

  Found the firmware that needs to be updated.

  Updates running...
  -Installation of pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_... Package installation failed: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
  -7.4.8.
  aborting update...

  The command to low-level error message was:

  Unable to parse xml output, bad for the package: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
  Root@server[/opt/Dell/srvadmin/sbin]#

  the specification of the server:

  Reference Dell R210 II

  Intel Quad Core 3.2 Ghz
  16 GB of Ram
  CentOS 6.4 x 64
  1 x 256 GB SSD

  ChrisDuk112,

  Could you do me a favor and see if that solves the problem for you.

  the remount mount - o, suid, exec/tmp

  Let me know how it goes.

• Reference Dell all-in-one printer 922-is not recognized in windows 8

  Dell all in one 922 printer works is not in windows 8

  Hi Linda,.

  You can visit the link next to the Windows Compatibility Center that describes the Dell 922 Photo all-in - one Printer is not compatible with the Windows 8 operating system:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Dell%2Ball%2Bin%2Bone%2Bprinter%2B922&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  However, you can try to install the printer in Windows 2000 or Windows XP compatibility mode and check if this solves the problem.

  Reference Dell Photo All - In - One Printer 922, v.G21, A04

  http://www.Dell.com/support/drivers/us/en/04/driverdetails?DriverID=R102523

  To install printer drivers in Windows 2000 or Windows XP compatibility mode,

  a. right-click the installation file, and select Properties.

  b. click on the compatibility tab.

  c. in compatibility mode, check the run this program in compatibility mode for: option.

  d. Select available options under Windows 2000 or Windows XP .

  e. click apply and OK.

  See the link below for more information about compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Reference Dell T310 - laboratory home

  Hi all

  I want to buy 2 of the Dell Poweredge T310 server for my laboratory at home to practice and prepare for my VCP certification. Here is the specification I chose and please let me know if this is compatible and I'm good to go set up my lab, I have to make changes to these specifications? I have not ordered any RAID controllers and do I really need?

  PowerEdge T310 chassis with up to 4 hard drives and Quad Pack LED Diagnostics
  Delivery charges for PowerEdge T310
  16 GB 1333 MHz UDIMM memory
  X 3430 Xeon processor, 2.4 GHz 8 MB Cache, Turbo
  PowerEdge T310 heatsink of heat
  No controller
  No operating system
  Gigabit network adapter double built-in
  Controller BMC
  Cable for optical drive SATA for PowerEdge T310
  Integrated SATA, 1-4 hard drives connected to the integrated SATA - no RAID controller

  250GB 7.2 k RPM Serial ATA 3Gbps 3, cable 5po hard drive

  250GB 7.2 k RPM Serial ATA 3Gbps 3, cable 5po hard drive
  Non-redondante 375W PSU

  Thanks in advance,

  I found the focus check tracking if help http://communities.vmware.com/message/1475041

  I am looking in HCL - check result.

  Research: Your search for "Systems" returned 2 results.
  Display:

  Name of the partner	Model	CPU series	Supported releases
  REFERENCE DELL	PowerEdge T310	Intel i3/i5 Clarkdale series	ESX 4.1 U1 4.1 4.1 U1 4.1 ...
  REFERENCE DELL	PowerEdge T310	Intel Xeon 34xx series Lynnfield	ESX 4.1 U1 4.1 4.1 U1

  ? deviceCategory = Server & productid = 10062 & releaseid = 142 & deviceCategory Server = & partner = 23 & keyword = t310 & page = 1 & display_interval = 10 & sortColumn = partner & sortOrder = Asc "> 4.1 ...

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.