Reference to the parallelism - improve update tree times

Similar Questions

• The performance improvement chart real time

  I'm working on a simple graph in real time. The data is queried every 50ms, and each survey results in a line one pixel wide, height in pixels (data_point) . The chart scroll such as new data is located on the right, and the oldest values ends up by falling from the left.

  In other words, pretty basic.

  My solution is embarassingly brute-force, in what I just use theMC.graphics.clear () and a loop of lineTo()s for each graphic update. If this appears correctly (and I can control the refresh rate to mitigate CPU burn), it should be painfully obvious why I want to get away from this method.

  I have to scroll or pan the a full graphic pixel to the left (and remove the line to the left) and then just pull a new line on the right, but I don't know where to start. Assuming that such a thing is possible in AS3, someone would be kind enough to point me in the right direction?

  This can be done a few ways.

  First class graphics.

  its safe to assume that you draw with the graphics removed the displayObject?

  Otherwise, you make several updates in the loop.

  Remove the displayList drawing while pulling all parcels.

  Then, BitmapData.

  You can use scroll(1,y) to move the image to the left.  In addition, by using bitmap data, you can lock the bitmapData to limit the refreshment of a given area.

  workign with the image bitmap information is easier to use when drawing...   Of course, this requires a little more math you can't use just line with bitmapData.

  But you can use a matrix to rotate a line at 90 degrees and increase in length.

• How can I prevent Windows 7 install the same 2 updates every time I log out

  Whenever I have shut down the computer a pop filter tells me that microsoft windows 7 is 2 installation updates and to not close or unplug the computer.  This procedure takes about 3 minutes before I get the ok to stop, why what is happening and what I can do to stop it.

  @harry60: to avoid confusion (mine, mainly), please start a new thread about your specific problem.  Indicate your full version of Windows (for example, Win7;) Win7 64 bit) in your first post and the numbers of KB updates that fail to install. Thank you!

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• have installed security was last updated several times still ms update says always that I have not

  using ms update, I installed the latest security update, several times, yet ms update keeps informing me that I still have to install it. I also tried to download the file and install directly, but notifications keep coming. no error messages were received during the installation procedures. the relevant update is update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351). a search of Add/Remove Programs shows that the update has been installed.

  Please tell us how can I stop notifications.

  Deane

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/update-kb2656351-keeps-re-installing-even-though/42ca3f06-47B7-4E28-a7f3-cf010ec6df39>

  If you find the answer to your problem, please let us know! I hope someone else can benefit from your solution.

  UTC/GMT is 18:34 on Saturday, January 21, 2012

• The update of the firmware bricked just my time capsule.

  I followed the prompt to update the firmware today and I got a 'did not finish' message type. (I don't remember what it was because I just clicked on past)

  'The airport' (which is my Time Capsule) is now Undiscoverable. I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  Now, I'm stuck in a dystopian nightmare of the 1980s with all the promises of technology and yet none of its features.

  Help!  (I write from my phone. A device that I've recovered from the future)

  I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  If you Hard Reset the TC, it is normal that AirPort Utility cannot find the TC... given that AirPort utility displays only devices of the airport that have already been configured.  The TC is not configured, so it's a Station of Base AirPort "nine" with the default settings.

  Start over and set up the TC to help "Assistant" Installation of Apple on your Mac or your iPhone / iPad.  After the back if you need some advice on this.

• Firefox continues to try to update each time I open the browser, and it then puts a message saying update failed. It does this on both of my computers. The most recent version, the other does not. How can I stop Firefox to do this?

  Firefox continues to try to update each time I open the browser, and it then puts a message saying update failed. It does this on both of my computers. We already have the latest version, the other does not. How can I stop Firefox to do this?

  If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data, because all profile files will be deleted.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• The use of pins of status (4 outputs) and data (8 entries) of the parallel port pins at the same time.

  Hi all

  I'm a newbee in labview. As part of my project work, I need to get 8 digital inputs and send 4 digital outputs.so I think to use the Parallel Port on the pc.i can make use of 8 datalines for entries. I found the site NOR is it possible to use status for output pins. But is it possible to use status for output pins pins and data for entries to the time.please help even me also mention of the measures to take, or keep in mind while implementing.also include any example vi that could be useful.

  Thanks in advance

  I would recommed you to NOT use the parallel port. Now a day you have hardly a PC with parallel port. also if you have some old PC then most likely last version of LabVIEW (e.g. 2010) will need a lot more memory RAM and processor.

  If you want a solution very very low cost then I would recommend using an arduino to that effect. You can then download LabVIEW Interface for Arduino and start working.

  If you continue to use the parallel port, then you could try (I haven't worked with parallel port and have not tested the following solutions)

  Download VIPM and then install the enclosed package. It will add the port e/s palette in your labview. and you can use it.

• XP installation update every time I turn the computer off.

  I don't know what happens, whenever I turned off my PC (running Windows XP Home Edition, Version 2002, SP3) for the last week or so, it is said that it will install an update, if I disable normally.  I mean, click the button, it installs and turns off, and then the next time that I turn it off, it happens again.  1 update every time, I let it run all along, just as I always before.

  Teepet,

  Please download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now run MicrosoftFixit50202.msi and choose it's default mode.

  When the Fixit has finished, open automatic updates in Control Panel. Do not restart the system, but even if you have been invited to.
  Set the update option for " download updates for me, but let me choose when to install them ." Click on apply, then OK.
  Close the automatic updates.
  Reboot the system now.

  Doing the above will force the automatic updates to download all the updates that are missing.
  When the Update icon, click it.
  Please note that updates are available and their numbers of KB.
  Close the window.
  For now, do installation No updates until what you have posted to those to whom they are.

  Expert MowGreen Windows IT Pro - consumer safety

• What window updated each time showing error code 00000646 nearly a month what is the solution

  What window updated each time showing error code 00000646 nearly a month what is the solution

  Thank you

  msiddique

  Gives it a try and see if it solves the problem.... http://support.Microsoft.com/kb/2258121

  Let us know if this helped

• References: Different Aspect in the development system and Run Time System

  I noticed a difference the appearance of references in system development and run time system.  He seems to have no effect in the executable version, but, out of curiosity, anyone has an explanation?

  Development system

  

  Run time system

  

  Jean-Marc

  TST wrote:

  When LabVIEW generates an executable file, it deletes the parts which are not necessary the screw (like the comics, or FPs of screws that will not open). I guess that's an extension of the one where the icon is not copied on. Another option is that RTE simply lack the code necessary to display this specific to this.

  In any case, I would say that this is a bug, even if it is minor.

  I don't think it's a bug, the summary of references to a CTL file, which is not present in the RTE, I think that LabVIEW disconnected from the reference shape the typedef and saves only the required properties.

  Tone

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• KB2572073, KB2518864, KB2633880, like all the others below, updates of each start, long loading times, success of Microsoft log shows 5 full loads,

  Simply, downloads, 5 times in my case exceeded the meter MS Updates to and somewhere other than my system. Whenever I start the same updates are available. FixIt questions do not address it directly at all, KB2572073, KB2518864, KB2633880 are updates of the problem SP2 and SP3 FIXIT has no ability to cover this because there is not a specific query on exactly that.

  Choose one or two-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=KB2572073+KB2633880+KB2518864&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_xp-windows_update&askingquestion=false

  Tip: See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9