refers to the undefined"vtable for httpClient"

Similar Questions

• How can you specify the default value for the undefined array elements

  According to aid LV, the tables have two default values, the normal default value and the default value for the undefined array elements.

  I assume that there must be a way to specify the default value for later, but I can't find it anywhere.  Any ideas?

  I know that you can drag the item out of the table container.  Change the default value on this scalar element.  Then drag the item in table tank.

• HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  Hello caromuna,

  It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.

  The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.

  Photosmart 3310 ink system failure

• Using C++ in QML classes in app without head: refers to 'bb::device:VibrationController:staticMetaObject' the undefined

  Hi, I've been weeks of work on the BB and had a lot of problems. Some of them have been resolved, some were not without the support of the forum.

  Now I have a great difficulty that I can't find answer by Googling.

  I am grateful to some body can help.

  Here's a simple case that make the big problem for me:

  1. create an app without head with Momentics. 2 project will be generated HeadlessApp and HeadlessAppService.

  Without modification, this code works well.

  2. I'm link below to use VibrationController in HeadlessAppService: https://developer.blackberry.com/native/documentation/dev/integrating_cpp_qml/index.html#usingcclass...

  below the code has been added:

  -Add codes below to main.cpp HeadlessAppService

  #include 
  using namespace bb::device;
  

  then add qmlRegisterType as below

  Q_DECL_EXPORT int main(int argc, char **argv)
  {
  
     Application app(argc, argv);
  
     qmlRegisterType("bb.vibrationController", 1, 0, "VibrationController");
     ApplicationUI appui;
     return Application::exec();
  }
  

  3. to confirm the new code, I just right click on the project and select build project.

  Bang! I got several error I don't understand. (red lines are errors)

  08:44:30 **** Incremental Build of configuration Device-Debug for project headlessTest ****
  make -j4 Device-Debug
  make -C .//translations -f Makefile update
  make[1]: Entering directory 'D:/BB-dev/momentics-workspace/headlessTest/translations'
  C:/bbndk/host_10_3_1_12/win32/x86/usr/bin/lupdate headlessTest.pro
  Updating 'headlessTest.ts'...
      Found 2 source text(s) (0 new and 2 already existing)
  make[1]: Leaving directory 'D:/BB-dev/momentics-workspace/headlessTest/translations'
  make -C .//translations -f Makefile release
  make[1]: Entering directory 'D:/BB-dev/momentics-workspace/headlessTest/translations'
  C:/bbndk/host_10_3_1_12/win32/x86/usr/bin/lrelease headlessTest.pro
  Updating 'D:/BB-dev/momentics-workspace/headlessTest/translations/headlessTest.qm'...
      Generated 0 translation(s) (0 finished and 0 unfinished)
      Ignored 2 untranslated source text(s)
  make[1]: Leaving directory 'D:/BB-dev/momentics-workspace/headlessTest/translations'
  make -C ./arm -f Makefile debug
  make[1]: Entering directory 'D:/BB-dev/momentics-workspace/headlessTest/arm'
  make -f Makefile.Debug
  make[2]: Entering directory 'D:/BB-dev/momentics-workspace/headlessTest/arm'
  qcc -Vgcc_ntoarmv7le -lang-c++ -Wl,-rpath-link,C:/bbndk/target_10_3_1_995/qnx6/armle-v7/lib -Wl,-rpath-link,C:/bbndk/target_10_3_1_995/qnx6/armle-v7/usr/lib -Wl,-rpath-link,C:/bbndk/target_10_3_1_995/qnx6/armle-v7/usr/lib/qt4/lib -Wl,-rpath-link,C:/bbndk/target_10_3_1_995/qnx6/armle-v7/usr/lib/qt4/lib -o o.le-v7-g/headlessTest o.le-v7-g/.obj/applicationui.o o.le-v7-g/.obj/main.o o.le-v7-g/.obj/moc_applicationui.o    -LC:/bbndk/target_10_3_1_995/qnx6/armle-v7/usr/lib/bb1 -LC:/bbndk/target_10_3_1_995/qnx6/armle-v7/lib -LC:/bbndk/target_10_3_1_995/qnx6/armle-v7/usr/lib -LC:/bbndk/target_10_3_1_995/qnx6/armle-v7/usr/lib/qt4/lib -LC:/bbndk/target_10_3_1_995/qnx6//usr/lib/qt4/lib -lbb -lbbsystem -lbbcascades -lQtDeclarative -lQtScript -lQtSvg -lQtSql -lsqlite3 -lz -lQtXmlPatterns -lQtGui -lQtNetwork -lsocket -lQtCore -lm -lbps
  o.le-v7-g/.obj/main.o: In function `int qmlRegisterType(char const*, int, int, char const*)':
  c:/bbndk/target_10_3_1_995/qnx6/usr/include/qt4/QtDeclarative/qdeclarative.h:191: undefined reference to `bb::device::VibrationController::staticMetaObject'
  o.le-v7-g/.obj/main.o: In function `QDeclarativeElement':
  c:/bbndk/target_10_3_1_995/qnx6/usr/include/qt4/QtDeclarative/qdeclarativeprivate.h:87: undefined reference to `bb::device::VibrationController::VibrationController(QObject*)'
  o.le-v7-g/.obj/main.o:(.data.rel.ro._ZTVN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE[_ZTVN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE]+0x8): undefined reference to `bb::device::VibrationController::metaObject() const'
  o.le-v7-g/.obj/main.o:(.data.rel.ro._ZTVN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE[_ZTVN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE]+0xc): undefined reference to `bb::device::VibrationController::qt_metacast(char const*)'
  o.le-v7-g/.obj/main.o:(.data.rel.ro._ZTVN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE[_ZTVN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE]+0x10): undefined reference to `bb::device::VibrationController::qt_metacall(QMetaObject::Call, int, void**)'
  o.le-v7-g/.obj/main.o:(.data.rel.ro._ZTIN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE[_ZTIN19QDeclarativePrivate19QDeclarativeElementIN2bb6device19VibrationControllerEEE]+0x8): undefined reference to `typeinfo for bb::device::VibrationController'
  o.le-v7-g/.obj/main.o: In function `~QDeclarativeElement':
  c:/bbndk/target_10_3_1_995/qnx6/usr/include/qt4/QtDeclarative/qdeclarativeprivate.h:91: undefined reference to `bb::device::VibrationController::~VibrationController()'
  c:/bbndk/target_10_3_1_995/qnx6/usr/include/qt4/QtDeclarative/qdeclarativeprivate.h:91: undefined reference to `bb::device::VibrationController::~VibrationController()'cc: C:/bbndk/host_10_3_1_12/win32/x86/usr/bin/ntoarm-ld caught signal 1
  Makefile.Debug:103: recipe for target 'o.le-v7-g/headlessTest' failed
  make[2]: *** [o.le-v7-g/headlessTest] Error 1make[2]: Leaving directory 'D:/BB-dev/momentics-workspace/headlessTest/arm'
  make[1]: *** [debug] Error 2
  Makefile:50: recipe for target 'debug' failed
  make: *** [Device-Debug] Error 2make[1]: Leaving directory 'D:/BB-dev/momentics-workspace/headlessTest/arm'
  mk/cs-base.mk:31: recipe for target 'Device-Debug' failed
  08:44:31 Build Finished (took 1s.47ms)
  

  I give up!

  Why adding simple code can be a problem? Please help me!

  Thank you very much!

  You must add this code into main.cpp to your HeadlessApp, not HeadlessAppService. Your spare part cannot run any UI stuff, trying to save an object any for QML is part of the things in the user interface.

  But anyway, reading your newspaper from the console, you seem to put in the right place anyway. Did you add this to your headlessTest.pro file:
  LIBS +=-lbbdevice

• Need to find the version number referring to the last name change for each emplid.

  emplID	Name age	Version
  ---	-----   ---	--------
  1	ABC	25	2
  1	ABC	26	5
  1	def	27	9
  1	def	28	15
  1	def	29	18
  2	JKL	15	5
  2	MNO	16	8
  2	MNO	17	11
  2	PQR	18	20

  Need to find the version number referring to the last name change for each emplid.

  As indicated by the version number change when there is change in age as well, but I need a query that gives the version number referring to the last name change for each emplid.

  with

  DATA_TABLE (EmplId, Name, Age, version) as

  (select 1, 'abc', 25, 2 double Union all

  Select 1, 'abc', 26, 5 Union double all the

  Select 1, 'def', 27, 9 double Union all

  Select 1, 'def', 28, 15 double Union all

  Select 1, 'def', 29, 18 double Union all

  Select 2, 'jkl', 15 5 Union double all the

  Select 2, 'mno', 16, 8 double Union all

  Select 2, 'mno', 17, 11 double Union all

  Select 2, 'pqr', 18, 20 double

  )

  Select emplid,

  Max (Name) name of Dungeon (dense_rank last order by version).

  Max (Age) age of Dungeon (dense_rank last order by version).

  version Max (version)

  from (select emplid, name, version,)

  -case where name! = lag(name,1,name) on (emplid version order partition)

  then "renamed".

  end change

  of data_table

  )

  where the change is not null

  Emplid group

  EMPLID	NAME	AGE	VERSION
  1	def	27	9
  2	PQR	18	20

  Concerning

  Etbin

• ORA-20001: unauthorized access (package for the undefined security group variable).

  I'm creating an application that uses the authentication of the APEX and characteristics (work) registration and forgot password forms (does not work).
  
  My I forgot the password is public (requires authentication). The user provides the user name and a secret answer, which are validated and then provides the new password. I try to use htmldb_util.reset_pw to reset the password of the user, but it does not work.
  
  I have a process on the new password page call a PL/SQL anonymous block that looks like this (see below), where username = P16_ITEM1 and P18_ITEM1 = new password.
  
  BEGIN
  apex_040000.htmldb_util.reset_pw (V ('P16_ITEM1'), V ('P18_ITEM1'));
  END;
  
  I don't know how to send a message of success/failure of such PL/SQL block to the APEX, but that's a separate issue, I guess.
  
  In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:
  
  ORA-20001: unauthorized access (package for the undefined security group variable).
  ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 22
  ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 1220
  ORA-06512: at "APEX_040000.HTMLDB_UTIL", line 1253
  ORA-06512: at line 8 level
  
  I've searched previous discussions and tried different suggestions with no luck.
  
  I'm on Oracle DB 11g XE and APEX 4.x.
  
  Any help will be appreciated. Thank you
  
  Alex.

  In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:

  ORA-20001: unauthorized access (package for the undefined security group variable).

  When executing code outside the Apex which depends on the security defined Apex group, perform the following steps before your own code:

  wwv_flow_api.set_security_group_id(apex_util.find_security_group_id('YOUR_SCHEMA_NAME'));
  

  Google "wwv_flow_api.set_security_group_id" for more details, like this blog:

  http://www.easyapex.com/index.php?p=502

  -Morten

  http://ORA-00001.blogspot.com

• AppleScript move files to the specific folder for Automator

  Hello

  I have a script to do a bunch of stuff that makes PDF files that I have stored in different folders. I want to be able to move the items by using a loop

  i.e. repeat with i from 1 to (number of files in the folder x) - assuming that all records have also the same number of files

  move point i of the x to folder toCombine folder

  pass I have folder is the folder toCombine

  pass the z to record toCombine folder i

  Tell application "combines."

  run

  tell the end

  end repeat

  "Handset" is just a simple automator app that takes the contents of the folder of the folder "toCombine" and adds them in the order I want which is X > Y > Z as page 1, 2, and 3. However, I see fluctuations in the order that I continue to work loop while watching the toCombine file, resulting in Z > Y > X and stop randomly.

  I added delay and even a control to see if there is no X before moving the point Y etc..

  Is there a solution for this?

  Just an idea: are you aware that the point of any folder i always refers to the alphabetical order of the Articles?

  For example:

  

• I want to erase the search results for certain searches. When I search for some keywords I get old SERPs that I know are not up-to-date. If I use a different machine, I get the current results. I can't find how to clear it.

  I am tracking my own Web site position in search rankings. For a short period, he appeared on page 1 for certain keywords. It is now on page 2 or 3, (as seen by me and other users when you use another computer or a browser), but when I search on my computer I see the old pages of results showing the top of page 1. How can I erase these old pages of results?

  If you press Ctrl and F5 at the same time, that changes? I think that Google (I guess that's what you're referring to the) changes in search results is inspired by a little if you are connected and preferences, etc.. Try to connect on google if you are connected.

• Dangerous change in the approval process for iBooks

  you remember long time for approval of new iBooks users author books that publish their books on the iBook Store since the beginning. Originally, it was WEEKS, sometimes even months to get through the approval process. Fortunately, which improved considerably over time and now it's down to a period of 24 hours. remove your book from the store.

  I have published more than 17 books so far since the beginning of the iBook Store, and certainly, I look forward to this improvement. However, I just found out the hard way that this improvement comes with a terrible price.

  The new procedure:

  Is the approval process faster (not only) not due to more staff to go through the comments. Instead, it is due to an approval procedure has changed as it has been explained to me by the customer support. Now, the examiner spends less time going through the books to get quickly to the store. I don't know the details, but I guess they check the side more art if works and not actually reading it Word by Word.

  With this first less carefully past obviously comes a new stage. The Department for approval now takes books later (perhaps if they have more time or something) and check for any errors and delivers a ticket while your book is already on the iBook Store. In fact, at that time, that is not on the iBook Store more and this is the great potential disaster you should be aware of. If you get a ticket issued, your book get ripped the store until you propose changes and he crossed successfully a new review process, which could take days. It's wrong, really wrong, and he just happened to two of my books.

  Out of the blue, I got a ticket of the iBooks team for my book 'Logic Pro X - how it works', which lies on the line store since 2013 has been updated (and approved) last September. On one page, I had misspelled the name of "iBook" Store instead of "iBooks Store" and on another page, I got a link to the page of my book by asking readers to write a comment Amazon if they like my book. Of course, it was also a no-no (a multi-billionaire company referring to a competitor of billions of dollars with a link).

  I made the changes immediately and has the new version uploaded in an hour. But the review process took over 2 days, after I contacted support and recovery from the case. And here's the reason:

  At the moment they have issued the ticket, my book was not available on the iBook Store more, nothing, not even a mention that it is "temporarily unavailable" like Amazon. The visitors couldn't find the book, all the links from my Web site, twitter, facebook and other sites related, everything was made immediately a dead link. Not only did I lose money, I had to deal with customer e-mails explaining why they could not find the announced book. Last week, it happened with another book when I was in town for a week and had no files with me. And even once, it took 3 days to review the correction that I added 's' to the iBook Store.

  It is mind-boggling that the Team did iBook ' t think that through

  Why not keep the booking online during the update

  Why not give priority to the presentation (check two typos took longer than the initial review of the book).

  I asked the support team to issue feedback on this subject, so they can correct this procedure. In the meantime, you better watch for potential new tickets, or someone had the same problem already?

  HI Edgar,

  It's really good to know. Thank you

  Difficult to have a work around for this.

  (Got a ticket) Right now, I'm waiting for approval,

  After correcting a few minor problems.

  I hope this will get fixed soon.

  I like your idea to keep the original "approved."

  live version, until the update is approved.

  Should be a simple and logical

  changes to the procedure.

  Kind regards... Thomas

• Is it possible to use the same password for two computers through quickbooks?

  We have two computers that are connected to each other through quickbooks and we must be able to get our e-mails from computers. Is this possible? We need to send invoices to the customers of a computer and the other is used for accounting and payroll.

  Original title: you can use the same password for two computers if they are already linked through quickbooks?

  Hi JayneB,

   

  (1) are you referring to the password of the user account?
  (2) who is the operating system installed on the computer?

   

  Method-

  I would like you to contact the Quickbooks support for assistance.

  Check out the link-

   

  QuickBooks support

   

  Hope this helps!

   

• Error code 0 x 800737712: refers to the component store corrupt, the component store is in an inconsistent state.

  Error code 0 x 800737712: I can't use Windows Update, I can't update Vista SP1, System Update Readiness Tool does not work, the error msg refers to the component store corrupt, the component store is in an inconsistent state. You are looking for a solution please.

  Hi BobJohnson08735,

  You can first try to use Fixit for Windows Update by following the link

  How to reset Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you get a Error Code 80073712 0 x, then try the steps as a result of the KB article:

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".

  http://support.Microsoft.com/kb/957310

  Hope this information is useful.

  Jeremy K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to keep the audit record for access to the Internet folder?

  Referring to the following link, I like to keep the audit record for access to the file from the Internet,

  Does anyone have suggestions on the option that I can put on this record?

  Thanks in advance for your suggestions

  http://support.Microsoft.com/kb/310399

  Hello

  You can follow this link & check if the problem persists:

  Monitor attempts to access and change settings on your computer

  Hope the helps of information.

• Product key is expired, and now I need the product ID for the service to help install... help?

  Product key is expired, and now I need the product ID for the service to help install... help?

  Hi RUSSELLDUNN270,

  Which product key you are talking about? Is it for any application or Windows XP?

  If you are referring to the product key of Windows XP, you can use the product key update tool Windows that will make changes to your Windows installation to update your product key.

  For more information, please visit this link: update your Windows product key

  Hope the helps of information.

  Please provide us with more information about the issue so that we can help you further.

• I don't have the activation code for my Windows Vista.

  OT: activation code.

  I have a computer dell laptop with windows vista. The OS has been corrupted and I had to reinstall Vista.  I lost the original disk, but concluded that a backup I had made when I got the computer. It worked, but I don't have the activation code. I called Dell to ask them to send me disks of software for the software I got when I bought the computer. They are my account, but was told that they no longer support vista. For $200.00, they could get my computer work. I told them it worked. I just need the disc or activation code. They said that Microsoft would not let that happen. I don't know why. I bought the software, when I bought the equipment. It's mine.

  I called Microsoft. Microsoft said that they no longer support Vista. They said buy a new computer or a new copy of Windows. I have four computers, without counting those at work. My other computers use Windows 10. I use the vista computer to play music. I know that I can buy a new computer for 200.00, but the Vista computer is all I need. I have that I just need a code to activate it. Because Microsoft does not sell, does support it, just give me a code. Microsoft tech support guy told me: 'go to the black market on the internet. Do a search for activation codes. I said, OK, given that Dell will not help me with the products that I've bought from them, and Microsoft doesn't help me with the product they make and Microsoft makes me refers to the black market, I guess that's my only option. »

  A search of the internet has shown that there are a lot of people with my problem and many solutions of the product to keygens keys lists. But so far none of them have worked, and my anti-virus try to protect myself against malware. Y at - it REALLY No. MICROSOFT SOLUTION to MY PROBLEM, BUT THE BLACK MARKET?

  Hello

  Recovery Dell disks who buy from Dell are what is recommended when when you lose your product key.

  But you never mention looking for him:

  The COA sticker is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  If you need a disc to use this product key with:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Error when you try to play multimedia files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  ERROR: Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web.

  I get the error Windows Media Player 11.0.6001.7007.  "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web frequently. "What happens on the music or video files even those I had on my PC for a long time.  They work some days and other days they don't.  I have to reboot to clear it and it's really annoying. I can read a file and then 10 minutes later the same file will not play.  Sometimes after the error message, if I don't click Close, the video is not yet but the audio will not.

  I'm on a laptop HP DV5 with vista 32-bit and 4 GB memory such that shipped HP (Yes, 4 concerts and 32-bit).

  I don't know if it was related, but IE7 would continually fail to open, click on through the windows and should be completely closed.  essentially the WMV and IE are fails miserably on this laptop, and it was only 6 months old.  Firefox fixes my problem of browser.

  How can I fix this WMV as I can't UN/reinstall with Vista?

  I ran sfc/scannow after completion of the analysis, the results were that "windows resource protection finds corrupted but files could not solve some of them" gives then refers to where the cbs.log file is located. I tried to open the cbs log, and he says that access is denied.

  UPDATE: there seems to be a conflict between WMP and any other application that opens which can play the video with sound.  When I close firefox, and then the videos and sound can play (these same questions happened on IE7 and firefox was installed just yesterday).  I met the same problem with more than Pinnacle video editing software.  Is it possible to change a parameter with WMP as there is no sharing violation during a different application can play the video?

  SO thanks a lot!    I had to use the following steps to get your simple solution:

  1. Select Options under the button 'SYNC '.

  2. choose 'other Options '.

  3. click on the tab 'network '.

  4. only check box RTSP/TCP and HTTP and Multicast Streams allow the player Pourrecevoirun multicast stream (which meant I had to uncheck "RSTP/UDP"

  5. click on apply and take advantage of my windows media player.

  Thanks a lot wmd_user!