refills of computer at startup

Similar Questions

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• 'Virus protection' Virus has taken over my computer at startup

  Virus protection has taken over on my other computer at startup.  It is the only screen I can access.  It seems to be a fake virus scan and it asks for $49.99 to clean the system.  I can't access anything else to remove it.  If you have any suggestions, please let me know!

  I have a solution!  This has terrified my machine all morning, but I was able to do a system restore using the command prompt... Thanks to Douglas!

  http://answers.Yahoo.com/question/index?QID=20100306191930AAqK4h6

  -Click F8 when your computer starts.
  -Start windows in safe mode with command prompt.
  -If you use Windows XP type in '% windir%\system32\restore\rstrui.exe '.
  f you are using Vista, then just type "rstrui.
  This will launch your system restore feature.
  -Restore your computer from the date before the Virus Protection program has been installed on your computer.

• Clogged error my computer at startup

  Say that Windows 95 startup failed

  Hello

  1 did you change on your computer before this problem?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Microsoft ended support for Windows 95, I suggest you upgrade to a newer version of Windows.

  Information lifecycle for Windows Client products

  http://support.Microsoft.com/GP/lifeselectwin

  See also:

  Troubleshooting of problems starting Windows 95 and Error Messages

  http://support.Microsoft.com/kb/136337

• Small Business Server 2011 hangs on 'Apply the settings of the computer' at startup

  Small Business Server 2011 hangs on "Applying computer settings" on startup and can only start in safe mode

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/SBS/gg985359

  Hope this information helps.

• Windows Installer keeps trying to install an update for Paint Shop Photo Album, which is no longer available. Slow computer at startup.

  Original title: update

  Windows Installer keeps trying to install an update for Paint Shop Photo Album, which is no longer available. How he remove without disabling the windows installer? I installed v4.5 installer that allows enabling or disabling updates. Paint Shop appears but the box is not checked, so the installer must ignore, right?

  Using msconfig, I can find nothing in startup or services that will completely eliminate the problem, Evin with instaler disabled, Setup window will start to blink during boot computer has been scanned and cleaned with Security Essentials, SuperAntiSpy and Spybot. \

  There is a key in registry under HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ referring to it.

  What is no longer available - Paint Shop Photo Album or the update?

  If you have uninstalled Paint Shop Photo Album, you might see if running free Revo Uninstaller is able to get rid of leftovers that could cause problems.

• I seem to be locked out of my computer at startup.

  I have a Lenovo Y510, running Windows Vista.   At startup, the computer used to view the

  my photo directly from the camera to the inside and a line input for my password.

  Today, I connected my computer to my Visio HDTV using a VGA cable and, somehow,

  However, I know more actively making changes, the resolution on the PC has changed.

  Icons appeared larger, and when I went to the opening of the session, the image was bigger too and it

  covered in the input line, preventing me from login.

  I tried restarting, stopping and restarting and in safe mode.  No SOAP...

  Any ideas?      e-mail: * address email is removed from the privacy *

  Steve

  Hello

  1. are you able to connect to your computer now?

  2 are you getting any error code or error message? If Yes, what is the exact error message?

  3. the question occurred in safe mode?

  Please try following methods and check if it helps.

  Note: If you are able to start the computer, follow the methods.

  Method 1: Change the resolution of the screen and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

   

   

  Method 2: Run the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Please follow the steps in the article step by step and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Let us know if it helps!

• Envy 15-j140na: black laptop computer at startup screen

  HP ENVY 15-j140na
  Product no: J0B97EA
  2 years
  
  When I try and turn on my laptop, the screen does not turn on.
  
  The fan comes on full power for a second or two then quit entirely. After 10 seconds, the fan can be heard gradually increases to a normal level. Meanwhile, no activity on the screen.
  
  The power light is on with the wifi led
  The led caps lock flashes in a sequence of flashing 2 with a long interval between
  
  I tried:
  hard reboot
  BIOS reset by pressing win + B keys when you press the power button, but it doesn't seem to do anything
  
  Any help would be appreciated

  I solved this by downloading the update to the bios on a USB key and plug that while doing a startup in the bios. My laptop is now working well

• How can I put a lock on my computer during startup? whenever I log in I want to put a password to start the computer

  How to set up a password, connect to the computer?

  Hello

  See the following site:

  How to create and configure user accounts in Windows XP

  http://support.microsoft.com/kb/279783.

• Peripheral USB works intermittently on XP computer at startup. the Office of other problems, why?

  There are three 7 port usb hubs in a string, (all connected each), first of all, one from the computer, more a fourth with four ports connected to a Dell usb keyboard, which itself is connected to one of the hub 7 ports.

  Sometimes the lights mounted on all four centers, but it's a matter of holding your breath until he died which means the devices connected to them also does not work.

  Only one connected in the light of the computer is turned on, but even in this case, devices attached (like a usb keyboard), does not always work. They are all 2.0 but the computer is 1.0 I believe.

  On the desktop, they usually receive regular work but the desktop freezes, BSOD and endless error messages, especially during video playback or attempt to use the webcam in reports.

  Discovered today that you must enable USB in the bios. So far, who has worked, which means that there is no error reports or BSOD, nagging but the computer has not been extinguished at all since finding this out is the answer or is this something else?

  * There is another PS/2 keyboard and a mouse that is always attached now especially when you use a CD, (like XP). have to use the boot CD 'aid' like Acronis or having to access something in the bios, these devices are the only things that work like computer starts.* *.

  * Haven't had no idea where to put this, but the defalult was, "Performance and Maintenance", which I don't have on my computer so I just guess he's right.

  Thank you, but do not want to touch the registry.

  Never did not understand why he has often given it as a resolution, knowing he could totally botch a computer novice would have no idea how to solve this problem. His pan to the fire.

  Anyway thank you all for having tried to prevent him from thinking that the problem is resolved.

  It seems to enable USB in BIOS, it set as the hubs knitting every time and no. become as much error messages.

  Takes some time in the BIOS, but it is nowhere as long as it was and now the ps/2 keyboard and mouse connected helps again.

  Tried using usb ps2 adaptors but they were next useless.

  Too bad, if they had worked, probably would not need other HID devices as backup :/

• Cannot modify startup programs - very slow laptop computer at startup.

  Hi my laptop is running slow at startup, so I thought I would "change the startup programs" via the control panel.

  I get the message 'Windows Defender is disabled' then when I try to turn it on it freezes.

  I have Microsoft Security Essentials.

  This question was asked several times but no answers that I can see.

  Thank you

  MSE disables Defender by default, MSE has its own integrated version of Defender.

  You can try this from Microsoft:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• No sound from the computer at startup - "speakers" not plugged in

  original title: no sound, does not not on start up. Troubleshooting says that not plug it in my speakers. Plugged on input 1 then on computer.

  I have speakers external yamaha and has always worked well until my daughter not connected the wire that connects into the hole of the speaker on computer.  She had no problem to use it on Ipod, but when I plugged the cable into the hole of the speaker (purple hole) on the computer without the audio sound at all not even start. Troubleshooting says my speaker wire is not connected.  I have Windows 7 - home premium, Intel Core i3, 4 GB of Ram memory.

  Sounds running system reads this device speaker not hung. I disconnected handed several times & put them in different holes on the computer. PLEASE, IF ANYONE COULD HELP, I WOULD BE SO GRATEFUL TO YOU! THANK YOU IN ADVANCE!

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Reference link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• HP mini 1000 computer: password startup Hp mini 1000

  my mother gave me her old mini hp but could not tell me what was the bios password if someone could help me my error says "failure of control of password system fatal error stopped" CNU9242MMJ

  @GreenBlaze

  Enter e9lo7v744w (3rd character is a lowercase L)

  Kind regards

  DP - K

• Apple software updates show on my computer at startup

  original title: UPDATES

  I have Windows Vista installed on my PC. When I start to "Apple software update" message is displayed. Should I install?

  Hi LarryPalcovic,

  It would depend on the update that seeks to be installed. If this is for ITunes and you are actively using the program (or intent in the future), it would be a good idea to install the update. This also applies to QuickTime.

  It depends on if you plan to use the software or not. Also if you can answer Eddieb - of issues, it would be useful.

• Auto works the virtual computer on startup

  I just made a stand-alone installation to a server ESX 4 and want to configure my virtual machine to start automatically at power on but can't find the options in the properties of the VM, can someone point me in the right direction?

  You can do this via the vSphere client.

  Read: http://pubs.vmware.com/vsp40u1/admin/t_configure_virtual_machine_start_up_and_shut_down_behavior.html

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =