Register DVD error

Similar Questions

• How can I fix "diagcab" file Ext. my register 0 Error 80070002 x? I can't update Vista.

  How can I fix "diagcab" file Ext. my register 0 Error 80070002 x?  I can't update Vista.  It seems I have to redo a diagnostic firm or something.

  Thanks, Greg

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK runs the next time he started - press Y and restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the CBS.log file created on your desktop (you can not manipulate directly) can compress the copy and transfer it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• Burner CD DVD error dirty

  Bought a laptop HP Pavilion 17 "last Christmas.  I was facing DVD hard drive since then (proably more than 1000 so far).  The DVD - RW has been intermittent and have used external DVD RW.  Portable DVD burner returned an error saying today 'CD burner dirty' and wouldn't read DVD.  Is there a solution to clean easily, or should I buy another internal DVD unit?  Thank you

  Hi @JFish53,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand you are trying to copy DVDs to portable hard drive, but it has stopped working and gave you an error message "CD burner dirty."

  Here is that a document can help:

  HP computers - drive cannot read disks (Windows, 10, 8)

  Let me know if it helps.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.

• TSSTcorp DVD +-error code RW TS - H653G ATA Device 39. I can't reinstall the driver. What can I do? programs and disks will not play.

  DVD drive no longer appears in the list with the C: drive
  drives can run in the drive.

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The dvd error message Vhs conversion

  I have a program to convert your own Vhs into dvd movies when I use it I get an error message something about the ip address of my computer, I called microsoft and my local far servise that no chance, the name of the program is that Plextor ConvertX everything else works on the program but when I go to capture video the error message appears. can someone please?

  Looks like a problem with the application, since, as you say, "everything works".  I would contact them first.

  Also - you can give the error verbatim instead of "something like".  Chances are that a search on the Internet for the exact message fly with answers.

• Can't burn files to DVD, error: "Media is not recognized.

  Original title: cannot burn files to DVD

  I am running Windows XP. I tried to burn different files on discs DVD new (e.g., Imation DVD - RW and RiData DVD + RW). I tried using Easy Media Creator 9, AShampoo Burning Studio ^, a Windows Media Center to burn my DVD discs (especially JPEG photos). In each case, I get the error message that my "media" are not recognized. This player will play music but it not "burn" my photos. Help, please!

  Hello
   
  1. what type of DVD burner do you have? Is this a DVD burner with capacities of reading and writing?
  2. have you ever burned a DVD using this DVD player in the past?
  3. are you able to burn the CD?
  
  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems
  
  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/
   
  See also:
  Windows XP CD Burning Secrets
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/bott_03september16.mspx
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot format DVD error "unable to complete the format."

  Original title: Impossible to format error DVDs

  Can anyone help. I have Windows Vista Home Premium 32-bit with service pack 2. I'm unable to format a DVD RW it comes back with an error message saying unable to complete the format. I have tried different brands of DVD, I saw it was a mistake before service pack 2 and there was a fix. I have SP2 and it will not apply the hotfix that is a quite old. Any ideas?

  Hello

  It seems that you are unable to format DVD, you get an error that it is unable to complete the format.

  You format the drive by using the "active file system?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Run the following fix - it.
  

  Your CD or DVD drive cannot read or write media.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Method 2: Remove and reinstall the drivers for the CD or DVD drive

  To do this, follow these steps:

  a. Click Start and then click Control Panel. Click system and security, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK. Restart the computer.

  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Refer to this link.
  Format a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/format-a-CD-or-DVD

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Cannot install my Norton Security DVD - error 8 504 101

  My DVD does not work even when I look in the Solution Explorer. It does not show an option? Help, please?

  Norton Community - error 8 504 101: http://community.norton.com/t5/forums/searchpage/tab/message?q=error+8504%2C101

  J W Stuart: http://www.pagestart.com

• not his year DVD error has occurred that Microsoft stop realtek HD audio

  No sound for dvd (year error has occurred in microsoft stops realtek hd audio and notifies an update)

  Hi darrenkerr,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. the problem occurs with single or multiple DVD?

  4. do you have other problems of sounds on the computer?

  5. what program you're using to play the DVD on your computer?

  I suggest that you install the updated card drivers by visiting the manufacturer of the computer or sound card manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• DVD error Code 19___

  My CD/DVD-RW - Optiarc DVD RW AD - 75308B ATA Device does not work, it starts, runs and then stops on the Device Manager I get the following message

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive

  
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot access my, CD DVD error 19 player

  I can't access my CD DVD drive in Device Manager, it shows error code 19. Please help me. Thank you.

  OT:device

  Hello

  Thanks for posting in the Microsoft community
  
  From your problem description, I understand that you found the yellow exclamation point in Device Manager. Please let me know if you do not experience this problem.

  I suggest you try the following steps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:back up the registry in Windows 7

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Microsoft Register Server Error

  I tried to install Pro Tools SE without success. After each installation, I get an error message telling me that the Microsoft Register Server has stopped working. People on the forums of m-audio have not been able to help me so I thought I would give it a shot here. I tried to play with the DEP, I bought a registry cleaner and I reinstalled the countless times. Please tell me that someone out there knows how to combat this phenomenon. I also have extremely limited computer knowledge, which makes it all the more difficult.

  Hi ifallgoeswrong,

  1. what version of Windows 7 is installed on the computer? It is 32-bit or 64-bit?

  If you are using the 64 bit version of Windows 7 then the location for the regsvr32.exe in the previous would be reduced from C:\Windows\SysWoW64toC:\Windows\System32 .

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Create DVD error - the disk in your DVD burner is not a recordable DVD

  Original title: DVD creation error

  I am trying to create a DVD movie but it comes up with an error, he says "the disc in your DVD burner is not a recordable DVD", but it is! Any help?

  I'm using Windows DVD Maker

  Hi Alistair,.

  Welcome to the Microsoft community.

  It seems that you are facing problems during the creation of a DVD movie. We're here to help.

  1 have had any changes made on the computer before the show?

  2. the problem occurs for a specific DVD?

  I suggest you to refer to the articles and check if it helps:

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-in/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings

  http://Windows.Microsoft.com/en-in/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  Let us know if you need more assistance.

• When playing a DVD error: "unable to display analog protection, video driver update."

  Original title:

  How to upgrade video driver.  get the message when I load the new dvd saying that analog protection cannot be displayed, updated video drver.

  I have only this message each time to time on dvd again.  Most of them play without problem.  You want to solve the problem because I don't know if there is a codec problem or I need a video upgrade.

  Hello

  Thanks for visiting and Microsoft Community to answer your concerns about giving!

  When you try to play DVDs, you get the error "saying that analog protection cannot be displayed, update the video driver".

  Quick questions:

  1. What program you're using to play the DVD? (Windows media Player, Windows Media Center, etc.)
  2. What is the full error message?

  The error message "cannot play the DVD because it is not possible to activate the analog copy on the output screen protection', you may encounter this error message for the following reasons:

  * Your DVD decoding software must be configured. If you have another DVD player program installed on your computer, read the DVD using this program and then try to play the DVD in Windows Media Player.

  * There is a problem with your video card configuration. Restart your computer, and then try again. If the error is not resolved, you may need to install a driver available for your video card.

  To determine if there is a newer driver for your video card, perform one of the following:

  o open Windows Update by clicking Start and then all programs.

  Check for any updated driver for your video card. If found, try updating the video drivers.

  o visit your computer or video card manufacturer's Web site.

  See the Microsoft article below for more information on updating drivers: update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  For your information:

  A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  A codec can consist of two components: an encoder and a decoder. The encoder performs the compression function (coding) and the decoder performs the decompression function (decoding). Some codecs include both components and some codecs only one of them.

  For example, when you rip a song from an audio CD on your computer, the player uses the default Windows Media Audio codec to compress the song into a compact WMA file. When you play that WMA file (or any WMA file that may be broadcast from a Web site), the player uses the codec Windows Media Audio to decompress the file for music can be played through your speakers.

  For more source on Codec, please see the following link:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  I hope that helps!

  Come back with more information so that we can help you better.

  If the problem persists, or you need help with Windows, please keep us informed.

  We're here to help.