registration for vpn
How to determine the severity level of cisco log on asa. I understand trap_severity recording level is used to define it. But my Setup seems not to be.
It shows as trap informational loggin. & If cisco emblem logging format is used.
I tried running configuration.but that nothing is displayed.
TIA
'information' is the severity level, and it is the severity level 6.
"trap" means that logging is supposed to be sent to a syslog server if you have configured syslog server (this is configured using the "logging host" command).
If you woud see the logs on the monitor, the command is "logging monitor", and if you want to see the logs in the 25applications of the ASA: "logging in buffered memory", etc.
Here is a list of the order that you can configure for different record types:
http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/L2.html
This is the name of severity with the actual level, and it also includes the syslog messages are included in the severity level:
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsevp.html
Hope that helps.
Tags: Cisco Security
Similar Questions
-
Traffic permitted only one-way for VPN-connected computers
Hello
I currently have an ASA 5505. I put up as a remote SSL VPN access. My computers can connect to the VPN very well. They just cannot access the internal network (192.168.250.0). They cannot ping the inside interface of the ASA, nor any of the machines. It seems that all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping this ASA VPN connection machine and other machines inside the LAN. It seems that the traffic allows only one way. I messed up with ACL with nothing doesn't. Any suggestions please?
Pool DHCP-192.168.250.20 - 50--> for LAN
Pool VPN: 192.168.250.100 and 192.168.250.101
Outside interface to get the modem DHCP
The inside interface: 192.168.1.1
Courses Running Config:
: Saved
:
ASA Version 8.2 (5)
!
hostname HardmanASA
activate the password # encrypted
passwd # encrypted
names of
!
interface Ethernet0/0
switchport access vlan 20
!
interface Ethernet0/1
switchport access vlan 10
!
interface Ethernet0/2
switchport access vlan 10
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
switchport access vlan 10
!
interface Vlan1
No nameif
no level of security
no ip address
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.250.1 255.255.255.0
!
interface Vlan20
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
pager lines 24
Within 1500 MTU
Outside 1500 MTU
mask 192.168.250.100 - 192.168.250.101 255.255.255.0 IP local pool VPN_Pool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 10 192.168.250.0 255.255.255.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.250.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Telnet timeout 5
SSH 192.168.250.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
dhcpd dns 8.8.8.8
!
dhcpd address 192.168.250.20 - 192.168.250.50 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
Picture disk0:/anyconnect-linux-2.5.2014-k9.pkg 3 SVC
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
value of server DNS 8.8.8.8
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
tunnel-group AnyConnect type remote access
tunnel-group AnyConnect General attributes
address pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
enable AnyConnect group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: end
Hello
No worries
As we change the config I would do as well as possible.
First, it is strongly recommended to use a different range of IP addresses for VPN clients and the internal network
No VPN_Pool 192.168.250.100 - 192.168.250.101 255.255.255.0 ip local pool mask
mask 192.168.251.100 - 192.168.251.101 255.255.255.0 IP local pool VPN_Pool
NAT_0 ip 192.168.250.0 access list allow 255.255.255.0 192.168.251.0 255.255.255.0
NAT (inside) 0-list of access NAT_0
Then give it a try and it work note this post hehe
-
Online transfer of the registration for PC Toshiba laptop
What is the procedure for the transfer of the registration for PC online Toshiba laptop
When I bought from a dealer who has already registered in his name.Hello
I think that it of not possible to do it on the Web site.
I think that you will need to contact Toshiba service partner in your country.I think that you will also need a confirmation of the garage which has saved this laptop.
But EPA should give you more details what is needed.The entire base of ASP in the world, you will find on the page of European support of Toshiba.
-
In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers. How can you bypass those to change your settings?
You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(140233) -
Registration for the Standard warranty and extended
I have registered my system to the Standard warranty and also fact of registration for extended warranty Service (2 years) and _got message for registaration successful for both, standard warranty and extended warranty_. But on the verification of the details of my system to
it always says my system is NOT REGISTERED and the guarantee here it shows only 365 days and not 3 years! Can someone pls help and inform me of the email address of contact of the Toshiba research customer service records and warranty extensions?
* After how many days they are updating the registration information on
? *. Maybe something went wrong during registration or the system not updated status. As Jeffrey has already suggested, eventually the data was not updated and you have to wait one, two day (s).
If we can't change the status of the guarantee, contact the service provider to authorize to clarify this issue!Concerning
-
How to use Quicktime Player 7 Pro registration for second computer? View order history goes back only 18 months. When I enter my key QT7 he just told me to buy again.
You need a separate license for each Mac.
-
EliteBook 8540p: I have no driver or registration for memory card reader in Device Manager
There is no registration for my memory card reader in Device Manager. The card reader does not work. SD card works in my other PC. Tried to download the Driver Ricoh Media Card Reader suggested by HP Support, with no results. It's as if there is no such thing as the card reader. Is there a way to shake the player in a localizable device? Or is it dead material?
Hello:
If there is that no device Base system not listed in Device Manager in need of drivers, then the unit is completely dead/disconnected from the motherboard.
I'm not a PC repair in commerce or training technology, and there are no diagrams of the motherboard I know to see how the circuit card reader is attached to the Board of Directors.
If you look at Chapter 4, pp 93-94's service manual, it seems that you can replace all separately.
-
I forgot the password for VPN record how I opened
First I have to buy the phone add password for VPN and I forgot how I fix this
You can try to perform a repair of the system as it will be your phone factory reset or below, try to perform a factory reset, but in order to achieve a system repair
Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when you are prompted, always connect your phone off press and hold volume or back button - this should begin the process of repair or reformattingIf you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP
-
Registration for the service is missing or damaged
Hello
I ran a scan with troubleshooting Windows Update tool and it came with this error: registration for the Service is missing or damaged. How can I fix it? Any help would be greatly appreicated!
See you soon!
Hello
Usually, you get this error during the installation of the software updates. If Microsoft found some problems in the digital signature of the update is when you usually get this error.
Take a look at this and see if this helps:
How to set recording of corruption problems MSI software update:
-
registration for the service is missing & windows update does not not in windows 7
I got the error "registration for the service is missing or corrupted" when I used the diagnostic download bits of one of your answers to someone else. I can't download the updates of windows from 08/10/16 - the latest downloads on 08/02/16. I did a full scan with McAfee & there is no problem in that. Given that the system sought & found these updates 08/10/16, the fan noise has served continuously as in a loop. I managed to stop that noise will 'services.msc', choose 'windows update', by selecting Properties & stop. If I start it again, it seems to go on and on but updates still do not download. I have Windows 7 Home Premium on a laptop. Can you help me?
1. have you ever run the McAfee Consumer products removal tool?
- Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. "Leftovers" can be here your troublemaker.
2 - is the same computer - not necessarily the same problem - as in one or more of these previous threads of yours?
-
HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?
HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?
When you see this error message?
IF its all in trying to make an update, then:
Make sure that the following services are listed and started.
in "search programs and files" type "services" (without the quotes). In the results, click on 'services' and the services window should open. Make sure that the following is listed and started:
Background Intelligent Transfer Service
The base filtering engine
Cryptography Service
DCOM Process Launcher service
Remote procedure call (RPC)
RPC end point mapper
Windows Modules Installer
Windows Update
IF it's trying to make an update and the foregoing is listed and running, then try this fixit - https://support.microsoft.com/en-us/kb/971058 to see if it helps.
PS - if one of the services above are not listed, or is listed but not start, then see if you can update your antivirus program and run a scan full to see if it detects malicious software. Then, run the fixit above.
-
I'll put up Anyconnect to replace our customers of Cisco IPsec VPN, since it is end of life. A part of the process is to get an SSL certificate and a FULL domain name to use for this. I've got that and it is applied to the ASA very well. Now we don't get these warnings to the subject it is not not sure and such.
The problem is that we use a non-standard port for the SSL VPN from 443 is already sent to an internal device. I have unused public addresses to the external interface of the ASA, but I don't know how I could use them. I would like to have a different IP address for SSL VPN, so I don't have to mess with the port forward that is currently in place. I read on proxy arp, but that looks like it could be a problem. I could have someone connect another cable to a different interface on the ASA (5512-X) and assign this static interface I want for the VPN, but I'm not sure it will work well. We have connections VPN site to site in place as well. Can I have the ASA listening on two different interfaces at the same time?
Recap:
IP 1 - address primary NAT, Site at tunnels put end here, some Cisco IPsec VPN terminate customer
IP 2 - want to have all customers of Anyconnect connect here, to migrate all legacy Cissco IPsec clients until they are all over Anyconnect.
Key is that I can not stop listening on IP 1 for site-to-site connections.
Thoughts?
Thank you!
On the SAA, you cannot use the additional IPS for VPN.
If tcp/443 is already used for an external server, then I would reconfigure the DNS entry for it to use the second IP address that must be sent to the internal server. You can then use the IP interface of the ASA for AnyConnect.
-
Hello
I would like to configure the ASA for vpn only. By default, ASA allows traffic from the interface of high security to low security interface. I want to stop it. Is it possible to do without resorting to access lists.
Thank you
John
Define interfaces for the same level of security and make sure that you do not have same-security-traffic permits inter-interface enabled.
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807fc191.shtml
Hope that helps.
-
Can the NAT of ASA configuration for vpn local pool
We have a group of tunnel remote ipsec, clients address pool use 172.18.33.0/24 which setup from command "ip local pool. The remote cliens must use full ipsec tunnel.
Because of IP overlap or route number, we would like to NAT this local basin of 172.18.33.0 to 192.168.3.0 subnet when vpn users access certain servers or subnet via external interface of the ASA. I have nat mapping address command from an interface to another interface of Armi. The pool local vpn is not behind any physical interface of the ASA. My question is can ASA policy NAT configuration for vpn local pool. If so, how to set up this NAT.
Thank you
Haiying
Elijah,
NAT_VPNClients ip 172.18.33.0 access list allow 255.255.255.0 10.1.1.0 255.255.255.0
public static 192.168.33.0 (external, outside) - NAT_VPNClients access list
The above configuration will be NAT 172.18.33.0/24 to 192.168.33.0/24 when you go to 10.1.1.0/24 (assuming that 10.1.1.0/24 is your subnet of servers).
To allow the ASA to redirect rewritten traffic the same interface in which he receive, you must also order:
permit same-security-traffic intra-interface
Federico.
-
Summary:
We strive to establish a two-way VPN L2L tunnel with a partner. VPN traffic is one-to-many towards our partner, and our partner they need of a many-to-one to us (they need to access a host on our network). In addition, our partner has many VPN, so they force us to use a separate NAT with two private hosts addresses, one for each direction of the tunnel.
My initial configuration of the tunnel on my grown up side of Phase 1, but not IPSec. Partner ran debug that revealed that my host did not address NAT'd in the NAT policy. We use an ASA5520, ver 7.0.
Here is the config:
# #List of OUR guests
the OURHosts object-group network
network-host 192.168.x.y object
# Hosts PARTNER #List
the PARTNERHosts object-group network
network-host 10.2.a.b object
###ACL for NAT
# Many - to - many outgoing
access-list extended NAT2 allowed ip object-group OURHosts-group of objects PARTNERHosts
# One - to - many incoming
VIH3 list extended access permit ip host 192.168.c.d PARTNERHosts object-group
# #NAT
NAT (INSIDE) 2-list of access NAT2
NAT (OUTSIDE) 2 172.20.n.0
NAT (INSIDE) 3 access-list VIH3
NAT (OUTSIDE) 3 172.20.n.1
# #ACL for VPN
access list permits extended VPN ip object-group objects PARTNERHosts OURHosts-group
access allowed extended VPN ip host 192.168.c.d PARTNERHosts object-group list
# #Tunnel
tunnel-group
type ipsec-l2l card
<#>crypto is the VPN address card crypto
<#>the value transform-set VPN #>card
<#>crypto defined peer #> #>I realize that the ACL for the VPN should read:
access allowed extended VPN ip host 172.20.n.0 PARTNERHosts object-group list
access allowed extended VPN ip host 172.20.n.1 PARTNERHosts object-group list
.. . If the NAT was working properly, but when this ACL is used, Phase 1 is not even negotiating, so I know the NAT is never translated.
What am I missing to NAT guests for 172.20 addresses host trying to access their internal addresses via the VPN?
Thanks in advance.
Patrick
Here is the order of operations for NAT on the firewall:
1 nat 0-list of access (free from nat)
2. match the existing xlates
3. match the static controls
a. static NAT with no access list
b. static PAT with no access list
4. match orders nat
a. nat [id] access-list (first match)
b. nat [id] [address] [mask] (best match)
i. If the ID is 0, create an xlate identity
II. use global pool for dynamic NAT
III. use global dynamic pool for PAT
If you can try
(1) a static NAT with an access list that will have priority on instruction of dynamic NAT
(2) as you can see on 4A it uses first match with NAT and access list so theoretically Exchange autour should do the trick.
I don't see any negative consequences? -Well Yes, you could lose all connectivity. I don't think that will happen, but I can't promise if you do absolutely not this after-hours.
Jon
Maybe you are looking for
-
Question about the Satellite X 205 - SLI3
Hello Anyone know when this phone will be available in Europe?Thank you
-
at the top of my page is the word "firefox" and a down arrow. " When I click on it my choice are: new tab that leads to the image of a star and the brand of the work book. I did no toolbar, how do I get a.
-
I am under DIAdem version 11.1 and try to use the command Call ExtProgram. A call toCall ExtProgram ("excel.exe", "G:\A folder Name\File Name.xls") called excel OK but then attempts to open .xls A.xls then folder and Name.xls. I tried to use the doub
-
Brother of FMC 9465 installed twice on LAN
I installed by chance my brother MFC 9465 twice with the same ip address on my network local network. We are working correctly. other installation gives a remarq fault with that I want to cancel this second (erronously) facility seems to be unpossibl
-
After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activat