Registration with Qosmio G40 - 10F entry

Similar Questions

• Qosmio G40 - 10F: cannot use IRDA

  I recently received this Qosmio G40 - 10F and I read on the specifications for its IR. But infrared devices such as the transfer of my phone to the laptop does not work. There is no such IRDA device on Device Manager to activate. So I got the idea that I could check on the bios.
  But I do not have the bios boot.
  It is usually used to be the DELETE key on my computer but when I boot on the laptop, it does not indicate any key to boot to the bios.

  I would appreciate if I could get help at the start of the BIOS or set the IRDA settings on.
  Thanx

  I agree, esc should do the trick. :)

• Qosmio G40 - 10F - extra hard drive

  Hello

  I have recently purchase a G40 thinking it was x 2 of physical drives, it appears in this model there is only a single physical HD

  I read in many places, there is room for the G40-10 for a reader to additional disk placed inside the machine but this model seems to have simply a fixed cover but the space for the reader to be mounted

  Nobody knows of the back plate is removed and an additional hard drive caddy to store additional drive - it should be relatively simple with a heat dissipation and other I think all that is needed is the replacement carriage and connector cable SATA - x motherboard 2 recognisies readers

  All I really want to know is

  (1) is it possible
  (2) is - someone doing it
  (3) toshiba reference numbers for the caddy and for a G40 - 10F sata cables

  Hello

  I have a Qosmio G30, but I saw G40 and if I remember, although in the lower corner, that there are two HARD drives covers. Two of them are placed close to the battery, and they have one, how to say, plastic circle. AFAIK the G40 is offered with one or two hard drives. The first HARD disk is placed inside fixed with a screw. One extra is placed under the second HARD drive cover fixed with two screws.

  I don't really know if your G40 is extensible, but you can contact the service provider authorized in your country. They have access to the database of Toshiba and they can check it for you. Part number is usually internal case and it is not easy to find number of exact part for these additional parts like the drive bracket HARD or cables.

  Make a call and pick up information on the possibility of upgrade HARD drive.
  One last thing: try to remove the cover for the second HARD drive and check if the HARD drive connector is there.

• I want to install Win XP on Vista on Qosmio G40 - 10F - need drivers

  Hello

  I have a Qosmio G40-10th which has Windows Vista.
  I want to switch to Windows XP but worry about what drivers I need and where can I get them?

  Also, I wonder if XP installation means that I would be able to use the Vista recovery disk I got with the Qosmio.

  Any help is very appreciated,

  Kind regards

  EOC

  Hello

  Go to the Toshiba driver page:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  And check if you have the drivers for win xp for your model, otherwise, it will be useless to install it.

  For my laptop, I installed Vmware with windows xp inside environment.

• Qosmio G40 - 10F down arrow is triggered by itself

  Qosmio G40 - 10th down arrow seems to trigger by itself while booting and while I view web pages.

  The problem surface when I was accessing the web pages at the start of the screen to scroll down by himself.
  Before, I thought that the button may be pressed hard but when I looked at the issue through a senser key application to test what triggers the down arrow key press on and found that two or three other keys trigger arrow key down automatically.
  namely, in arrow, i key, key k, function keys.

  But when I press ESC or Page up/Page down, scrolling stops for a while but starts to make arrow down by itself again.

  I have re-installed and restored the entire operating system to the date of loading of the factory and the problem solved only for a few minutes and the issue is back.

  I am convinced that this is due to software problem and not a hardware problem, as the key works fine for a while and after a few minutes, begins to trigger arrow down permanently.

  Please advise,
  Thank you.

  Have you tried an external USB keyboard and then you have the same problem?

  I think that it s a hardware problem and the keyboard must be exchanged, but that before test with an external keyboard.

• Qosmio G40 - 10F: how conenct to the wide band of sky LAN

  I don't know anything about computers.
  I buy the G40 - 10F and get sky to wide band and they say that you need a spare ethernet on the computer.

  All I can find is RJ11 and RJ45 is the ethernet in a differnent name.
  If I can't do a link to broadband this portable ill save my money.

  Hello

  Don't worry man.
  Qosmio G40 supports all ports that are important in establishing the sky broadband.
  The RJ45 is the Ethernet port; known as port Lan ;)

  You can connect the modem to broadband from sky to this port using the LAN cable just ;)

  Hoe I could specify what ;)

• Keyboard with Qosmio G40-108 problems

  Hello
  I have a problem with the keyboard trying to enter text. While typing I put funds, or emails or any where on the computer typing stops.
  I have to re-click in barely end I'm typing.
  It happens every time I have press the SPACEBAR key tab and enter the return key.

  All third party software is supposed to be compatible with vista. I had real problems with Qosmio G20 for 14 months, which eventually led to me have replace it with this machine.
  Other than typing I havnt had any other problems yet.

  I don't want to go back but can't seem to find a lot of online help

  Hi Symon

  To be honest, for me, it is not easy to understand what problems you have, but it will be interesting to know if you have type the problem using the Windows Notepad or Microsoft Word. Or even if you type something to open the window Internet explorer, like passwords, or perhaps the mails.

  Third party software you can be sure that everything will work perfectly.
  For more questions you can, during the initial contact, your local dealer. Maybe they can better understand exactly what is happening.

• Problem with my Qosmio G40 - 10F BIOS

  Hello

  I m desperate I need access to my computer before Wednesday or I could lose my job. I installed an SSD that went well. I adjusted the BIOS settings and now my computer will not boot.

  He goes to logo Qosmio and logos of hard drives USB etc and crashes. I can't get into my BIOS because it seems to ignore the key to go into the BIOS (I tried ESC, DEL, F1, F2 or F8). The computer stays on the screen of the icon. I disassembled my machine and removed the rtc battery it s been one day but he hasn t reset the bios by default.

  Someone at - it ideas? Is there a jumper / switch on the motherboard to reset MIPD? Y at - it a special key to press I don t know? Where ahould I hit him!

  Any help would be greatly appreciated I will be in serious trouble if I can t get my work I know that I have ahoukdnt have mapessed ith BIOS, but I assumed the worst I would be able to access and reset.

  O thank you very much for all the advice

  Phil

  Hello Phil

  Now, I found this interesting thread on your problem. What is find a solution?
  If nothing helps remove SSDS, set the BIOS settings by default (if you enter it again) and put the old HARD drive.

  General SSDs should be recognized correctly and there is not a big problem with these updates.

• Should Qosmio G40 - 10F - we support a 12mm hard drive?

  I searched the internet for this, and I found a few sites say that it supports a hard drive of 12mm in its Bay, and others have said not that at all.

  "I just want confirmation that a 12mm of the 2.5 HDD", we can insert in the laptop, I want to upgrade to the new WD 1 TB 2.5 "HDD, but it is not the standard size of 9.5 mm and 12mm instead.

  Thank you

  According to the specifications of the laptop FUJITSU G8BC0003K251 HARD drive for use with your laptop and the height of this disc is 12.5 mm HARD so I think that's not a problem to use the other HARD drive with the same height.

• Qosmio G40 - 10F won't boot up - PCI Express error

  I recently installed a windows update and the laptop came in restart mode.
  When the system boots it tries to start then I get a say black screen error PCI Express.

  I tried a system restore, but the disc does not start, also tried to access the bios and it does not work.

  Can I please ask for more help on this one because I don't have any problems at all, everything seems that a windows update has messed with my config in the bios.

  Help, please!

  Hello

  I can't believe that Windows update would affect the BIOS.

  In my opinion, this must be just bad luck.

  PCI Express error means generally that a PCI device on the motherboard has started to malfunction.

  This means that it could be a motherboard problem that could be solved by replacing the mobo

  Sorry man, but I think that you don't have a lot of options here... seems that Toshiba ASP technician should take a look at this question :(

• Qosmio G40 - 10F - graphics card problem

  I bought my laptop in 2007 and now have a problem with the video card 8600 m GT (vertical or horizontal lines show and get a message on the GPU).

  After reading a few similar posts, I think I have to replace the motherboard, rather than just the graphics card.

  My problem is that I don't know what motherboard I have or what I need to upgrade to.

  Can someone help me, because I'd like to get this operational return.

  Thanks in advance.

  Hello

  Your description looks exactly like the rest of the population everywhere worldwide including laptops are faulty.
  I suggest you Google "nvidia defect". Welcome to the club...

  Kind regards

  EOC

• Qosmio G40 - 10F: how to set up double Tv Tuner in Windows Media Center

  Hello

  I recently bought a 10th G40 and I was wondering how to set up dual Tv Tuner in Windows media Center to watch and record the Tv at the same time.
  I tried to download the new driver from the Toshiba download page, but it seems to make no difference that Media Center does not give me the ability to configure 2 tuners.

  Any help would be grateful

  Michael Bowen

  Hello

  Found this useful Microsoft page:
  http://www.Microsoft.com/Windows/products/windowsvista/footnotes.mspx

  Take a look at the chapter * M *-> on MCE

  You can find this info:
  + Reading and TV recording features require a USB TV tuner or external. Supports up to two TV tuners +.

  So in my opinion, you cannot record TV and watch another channel at the same time using only the internal TV tuner.

• Question about a part received with Qosmio G40-127

  Link: [http://peecee.dk/upload/view/112184]

  It is in the box for my newly purchased G40 - 127.
  I have no idea of what he does and I'm getting more and more curious.

  Help?

  Post edited by: kongbuur

  Did you look in the user manual?

• Qosmio G40 - no webcam with live Messenger

  Hello world

  I installed Win 7 on my Qosmio G40 instead of Vista and everything work fine except the webcam that does not work with live Messenger (only) no matter what I do (I tried several drivers, re-installed Win messenger live, close some processes, etc ;) I get this error message:

  '* Cannot start your webcam. "Check if it is not used by another program and retry."

  What the hell can I do to fix this?

  Hello

  I read a lot of discussions about the problems with webcam and messenger Ms.
  The problem with Vista has been resolved by the SP1 from Microsoft Update.
  Now, it seems to be that the same problem with Win 7 looks like a thing of compatibility

  However, because the message says that the webcam is used by another application, I suppose that some background processes lock the webcam

  You must remove webcam and messenger MS startup in msconfig.
  After that, restart the laptop and don t start the webcam software if you want to use it in Messenger from Ms.

• Problem with BRIGHT. EXE in QOSMIO G40

  Hello and Hello,

  I'm a new user here at the forum, and I hope I'm posting in the right place :).

  I just purchased a Qosmio G40 well in March and I'm very happy with it, but 3 days ago, I noticed a problem with it, the BRIGHT program. EXE, that controls the brightness of the flat screen does not work (well, it stoped working), when I press the button in the Panel frontal operational, or use the FN + F6 or F7 combination, this does not work, windows indicates that the BRIGHT program. EXE gave an error but does not specify what error.

  Does anyone have an idea why this happens and how to solve?

  Best,
  Ricardo

  That's the problem! If you want to use the system restore then all settings (settings of operating system, installed programs, registry changes, etc.) will be defined at the point of time at the beginning!

  This means that you lose the programs that were installed after the restore point created!

  But it should solve your BRIGHT. Number of the EXE!