Reinstalled XP, but no Internet connection
Hello and Hello.
I have an old Compaq Presario. 6122AP desktop PC I had to reinstall XP using the original disk from Compaq and had the impression that this wipe the hard drive and do a clean install.
This is not the case, as all the old files are still on the C:\ drive. This isn't a problem, and I include it just for reference.
The disc did install a new version of XP that starts from, but none of the original programs are recognized.
What is a problem is that I have canoe to connect to Internet.
It is impossible to establish a network connection - I can select 'broadband on All The Time', but no icon is displayed in the login window network and Internet, where connections are generally indicated.
In the hardware - device manager, it says "Other devices" - Ethernet controller, with a big yellow question mark and an exclamation point. (Also the multimedia Audio Controller and the USB controller).
On the general tab, we have:
Location: Bus PCI 5, device 8, function 0
Status of the device: this device is not configured correctly. (Code 1)
To reinstall the drivers for this device, click on reinstall.
Looking at the details of the driver on the driver tab it says no driver has been installed.
On the Details tab, we have:
PCI\VEN_8086 & DEV_1039 & SUBSYS_00910E11 & REV_81\4 & 25296D 99 & 0 & 40F0
I search the HP and Compaq sites to download driver but I can't find any specific information to solve this problem.
Any help would be much appreciated.
Thank you in advance.
ADE
Probably of Intel Pro/100:
http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=407
Tags: HP Desktops
Similar Questions
-
WRT54G good signal wireless but no internet connectivity.
I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.
Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.
I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.
I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.
I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.
Is it possible to have two bad routers that the internet can pass through but the router cannot detect?
At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.
Any help that anyone can give is most appreciated.
Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.
-
21 Pro slate - Gets the IP address but no Internet connectivity
Hi all
I have a slate of 21 Pro with no internet connectivity at home. The device gets an IP via DHCP on cable networks or wireless, but when you try to browse or access resources on the internet, it simply expires. I tried also to assigning a manual IP address without success. If I take the tablet in a café local wi - fi, it connects fine, but I can't make it work at home. My ISP is Baja broadband, a 50MB / 5MB cable connection LAN details below:
* Arris T822G cable modem - no. ISP-condition, ability of routing and firewall, just a regular old modem
* Cisco/Linksys E3000 router wifi - internal network gets NAT'ed here. not about filtering, fancy
* Switch 24 port managed gigabit Netgear
I tried bypassing the internal network and connect the slate 21 Pro directly to the modem Ethernet cable through cable. Same problem - it gets an IP (a public IP address in this case), but does not connect to all websites. HP sent me a replacement unit that shows exactly the same problem. Both units work very well at coffee wi-fi.
(OS is Android 4.3 Jelly Bean. I could take the unit to the WiFi Café and see if there are updates available OTA if anyone thinks that might help).
I am an engineer network with HER 25 years of experience. My home network is a mature network without problems. Connected to this network and works perfectly are: 2 iPhones, a Roku box, a smart LG TV, 2 Macs, Windows PCs 4. already had 2 HP Touch tablets, which were also very good. Home visits can connect their phones and tablets to our wi - fi without any problem. It's * just * slate 21 Pro, which is bad.
I'm puzzled. Any ideas?
Thank you
SteveUPDATE: it's resolved. I found that I was able to gain access to Web sites by IP address, but no host name. There was something wonky with the DNS server provided by the ISP. Once I substituted another DNS server in the IP configuration, it works.
Weird!
-
WRT1900AC shows connected to the laptop wireless, but 'NO internet Connection' triangle
recently replaced EA3500 Cisco that quit smoking with WRT1900AC
configured for the wired network OK
will connect WIFI for android Tablet
DOES not connect to win 7 PC... worked fine with the old router (2 years)
reset the WRT1900AC to factory settings... allowed 2.4 and 5 ghz...
PC sees the wireless network and connects with password, still "NO internet connection".
any ideas?
Thank you waltinbatonrouge
Thanks a lot for taking the time to suggest a fix... But the WRT1900AC went back to Best Buy yesterday. Easy back, by the way.
Oh just a parenthesis... the WRT1900ac has finally connected ok Cat5. The speakeasy speedtest showed on 100-105Mbps of download, the same as the old EA3500 seized croasse.
So, instead, I found an EA3500 used in a store of the local computer. Reset default and he already had the latest firmware.
The old router Cisco EA3500 used the very simple "Cisco Conect" utility.
Forums directed me to a version EA3500 of the "Linksys WiFi Smart" utility, which was a painless and immediately picked up the wireless for laptop Toshiba.
He ran the same features on the speedtest and connected 'excellent' on room android...
Have a great week!
-
I recently installed a new Comcast wireless gateway, which includes a built-in router. My Ipod and Ipad work perfectly with this new router connection. My Dell laptop, however, connects to the router without a problem, but it surfing the internet very slowly and sometimes can't access it at all. The router connection remains strong during these periods of power failure, however. I don't get online no problem when I connect directly to the router/modem with an Ethernet cable. Network troubleshooting does not detect a problem, I have released/updated my IP address, and made sure I had updated drivers. The issue still [persists. Any input on what to try next?
Hello Scot,
Thanks for posting your question in the Microsoft Community forums.
The description of the problem, I see that the Internet connection is very slow on the computer.
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
Maybe there's a chance that some network settings, start services application or a third party or a security software restricted it to connect properly and is responsible for the internet connection is slow.
I suggest you to follow the steps below and see if it helps.
Method 1
I suggest you try the procedure described in the following Microsoft Article and check if it helps.
Internet Explorer is slow? 5 things to try
http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performanceWarning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Method 2
If the problem persists, I suggest you to follow the steps described in the following Microsoft tutorial and see if it helps.
Wireless and wired network problems
Why is my Internet connection so slow?
Method 3
If after performing more high question method persist, try to perform the clean boot and temporarily disable security software and then check the speed of the Internet.
Step 1: Perform the clean boot
Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135/en-us
Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.
Step 2: Temporarily disable security software.
Disable the antivirus
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.
Method 4
Since then, the issue is not resolved by disabling the security software, Windows Firewall could be the next possibility. So, I suggest, temporarily, disable the Windows Firewall and check if the problem persists.
Refer to the following steps:
- Press the Windows key + R, type firewall.cpl , and press ENTER.
- Click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- Click turn off (not recommended) Windows Firewall under each network location that you want to stop trying to protect, and then click OK.
Caution:
You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. You must reactivate as soon as you have completed troubleshooting.
For more details, you can see the article mentioned below.
Enable or disable Windows Firewall
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
WIFI connects to the router but no internet connection on 15R 3521
Hi, the new laptop 3521 with Win7 Pro the WLAN will connect to the selected wireless router but is unable to establish an internet connection.
WLan Driver 1703 was duly installed once the Chipset driver was installed, as recommended.
Fortunately, other mobile devices to connect to the same router. Ubuntu on this laptop was also happy to connect to internet on WIFI, only Win7 fails.
Disabled the Win7 firewall, but no change. This connection, unidentified in the network and sharing Center. Router SSID etc have been entered correctly. Remove the WLAN profile and not reinstated, no change.
Tried to connect to another router wireless with the same result. I can only run this laptop on wired connection to the router.
I am at a loss as to what other steps I could take to correct this key WLan / internet access.
Any suggestions would be welcome. See you soon.
Hi love,
Thanks for your advice. I deleted the profiles (two identical found!), also removed all entries of all WiFi routers in Win 7 registry. This step has not resolved the problem.
However, I found the reason for the connection problem and the solution is the following:
In the wireless connected (TP-Link) router, wireless--> channel settings is set to 'AUTO' (which is to select automatically 20 MHz or 40 MHz).
In the device driver Dell WLAN 1703 (properties--> advanced--> bandwidth 802.11 n, the value has been set on (ie the Atheros is the default!)) "20 MHz.
Once I put the option value "20 MHz / 40 MHz Auto", the connection comes to life.
What a relief!
The question is now completely resolved. Thank you to all who have contributed.
Better with respect to Dzsino.
-
Wireless internet is connected but no internet connection.
I used Idea_gprs to the Internet on my mobile galaxy s2. But when I attached mobile with my laptop via wifi hotspot mobile it shows yellow mark means no internet connection. I also have the laptop computer on the same BSNL broadband connection. Connection high speed works fine but I cannot attach my laptop to the pc.
Windows IP configurationName of the host...: my PCPrimary Dns suffix...:Node... type: hybridActive... IP routing: No.Active... proxy WINS: No.... DNS suffix search list: local.lanWireless network connection Wireless LAN adapter:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Qualcomm, Atheros AR9285 802.11b/g/n WiFiAdapterPhysical address.... : 74-DE-2B-A8-21-77DHCP active...: YesAutoconfiguration enabled...: YesEthernet connection to the Local network card:The connection-specific DNS suffix. : local.lanDescription...: Realtek PCIe GBE Family ControllerPhysical address.... : E4-11-5B-F7-58-21DHCP active...: YesAutoconfiguration enabled...: YesAddress IPv6 local link...: fe80::9c6f:c68b:7099:bf7% 11 (Preferred)IPv4 address: 192.168.1.2 (Preferred)... Subnet mask: 255.255.255.0.Lease obtained...: Tuesday, November 27, 2012 23:03End of the lease...: Wednesday, November 28, 2012 11:03... Default gateway. : fe80::225:5eff:fe61:97bc % 11192.168.1.1DHCP server...: 192.168.1.1.DNS servers...: 192.168.1.1.NetBIOS over TCP/IP...: enabledTunnel adapter ISATAP.local.LAN:State of the media...: Media disconnectedThe connection-specific DNS suffix. : local.lan... Description: Microsoft ISATAP adapterPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard adapt 6TO4 tunnel:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Teredo Tunneling Pseudo-Interface:The connection-specific DNS suffix. :... Description: Teredo Tunneling Pseudo-InterfacePhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesIPv6 address...: d 2001:0:9 38: 6ab8:1842:579:3f57:fefd (preferredEXEs)Address IPv6 local link...: fe80::1842:579:3f57:fefd % 13 (Preferred)... Default gateway. : ::NetBIOS over TCP/IP...: disabledTunnel adapter isatap. {A6912753-123B-462F-A80B-6E43DFDCE741}:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Adapter Microsoft ISATAP #2Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesReusable Microsoft 6To4 tunnel map:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description.... : Microsoft 6to4 adapt #2Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 15:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft 6to4 adapt #3Physical address.... : 00-00-00-00-00-00-00-E0Active DHCP.... : No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 16:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #4 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 17:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #5 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 18:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #6 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesSo my question is how I connect to the internet by using the galaxy s2 on my laptop.Hi Vinod,
The question you posted would be better suited in the Sumsung Forums. I would recommend posting your query in the TechNet Forums.
Sumsung Support Forum
http://www.Samsung.com/Levant/support/troubleshootingguides/supportTroubleShootingGuidesMain.do
Hope this information helps.
-
I can connect to the router but no internet connect windows 8
I took each of boredom that my NEW HP envy provides however I still get a no internet connect error. If I reset my router and checked that it is acceptable. I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!
Hello
Check with HP Support, their online documentation and drivers, diagnostics,
and ask questions in the forums about known problems.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/===============================================
Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmMicrosoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8 - Hardware
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft - Windows 8 - why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft - Windows 8 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctlyDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
WiFi signal but no internet connection
I'm at a University in Tianjin, China and having a laptop with Windows 8 Ansus. I have a wifi router and a cable and had internet connection in this place in the past. I have reset the modem to create my network and password.
I see my network identified by the computer but it says 'Limited', and there is no internet connection. I'm sure it's not not to do with the settings on my computer, and I had someone else to confirm. I have a connection when I go into a classroom and find their signal.
What could cause the problem? How can you have a wifi signal but no internet? I invited people to ask the technicians at the school, but nothing has changed. Would it be a they forgot to press the button or something? There is no internet to the block of flats I live but the other parts of the school have.
Just trying to understand.
Stephen Hoare-Vance.
Greetings
The technician of the College gave us a different IP address for the connection. I guess that our block has a separate IP address of other blocks. Apparently the number after the third point is variable; a number any scope is ok. I couldn't communicate avec.115 but can avec.98
I don't know why they changed, but the problem is solved, thank you.
I also learned that when the router is enabled it will connect to the computer and display a signal, even if there is no connection to the internet.
-
Flashing led but no internet connection
Hi I have a gs108 switch and I connected to my modem and my pc and it works fine, so my problem is that when I connect an ethernet cable from the switch to my TV or ps3 im unable to get internet connection on my TV has recommended that I use a proxy, then I may be able to have a connection that i havnt tried yet and the ps3 seems to not detect the ip address
Hello Cai,
Welcome to the community!
You will probably need a router instead of a switch, a basic modem can only give a unique IP address. Because you used the PC, he's already got the IP address of the modem. Why the TV and the PS3 does not get an IP address is because the modem can provide only 1 (one). Use of the switches is to receive and send the traffic, so it has nothing to do with the IP address.
I hope this helps, if you have any other questions do not hesitate to ask.
Thank you
-
Satellite P300 connected to the WiFi router, but no internet connection
Help!
I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old placeAny suggestions would be greatly appreciated.
Thank you
Hello
If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).
Maybe you should get in contact with the ISP and need to check if the connection is ready and available!
Welcome them
-
Satellite A110-293 connected to WiFi, but no Internet connection
My Satellite A110-293 to connect to public WIFI, but he can't see internet of it.
I click on the sign of X to fix Vista and vista restarted network and the adapter, but it's always the same.What should I do... ?
You mean public wlan hotspots called?
It would be good to know if your wireless network is running your Internet has the House or if it's just a problem with lan external / public.
What I can tell you now, are looking for the latest drivers wlan on Toshiba download page and try to update. -
I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7. The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox). When you connect via a LAN, however, I have no problem. Here are some details on what I tried:
1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem. Yet, I restarted those and nothing helped.
Rebooted 2.) the computer.
3.) done a system restore.
4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.
5.) turned on and off the wireless on the keyboard button.
6.) as gone with the Device Manager and press update driver software for all network adapters.
7.) deactivated and reactivated all NICs.
I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works. I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.
Thank you
Zack
I have it! It turns out that my SonicWall VPN has been the origin of the problem. Thank you!
-
Internet access but no internet connection
I have a dell computer running windows xp professional sp3 that I just removed virus and malware Malwarebytes, SAS and tdsskiller. Now, I can not connect to the internet. I use a direct ethernet connection.
Hello
You can try all reset them TCP/IP and WINSOCK by this command prompt:
netsh winsock reset
netsh int ip reset log.txtHow to run the command prompt in Windows XP:
Click on Start - run - type cmd.exe and press enter
LC
-
can I do a cleaning/cleaning of the hard drive - and explain how this is accomplished -
the uninstall does not necessarily mean that the files are deleted kin your computer, the best that you can do this time is to backup all your files and programs and then reformat your hard drive to a new installation and upgrade of Windows.
also check your system if it meets the requirements for an upgrade, you can check the link below for system requirements:
Vista Windows
http://Windows.Microsoft.com/en-GB/Windows-Vista/products/system-requirements
Windows 7
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Maybe you are looking for
-
Satellite T130 - 11 H - NO Audio output device is installed
I brought this new * Toshiba T130 - 11 H Satellite * (Windows7 / x 64) last week and at first, it was fine... Although I now have the speaker icon formidable with a RED CROSS in the lower right of the screen!It's become such a pain now - ive never ha
-
ProBook 650 G1: Bluetooth speakers does not connect at startup
I have a new HP laptop with Broadcom bluetooth. My bluetooth speakers work, but I have to manually connect every time Windows starts. First of all, I put as audio device bluetooth speakers in the Panel by default: Then I reboot. I first hear a beep i
-
Photo printing, vertical lines when you print multiple images on a page
I went from iPhoto to Photos. Now I'm having a problem printing (HP Photosmart Premium 309 c) pages with many photos for my annual calendar. Often the picture on the right will have vertical lines. I use PS 14 items. I did this for years and I am su
-
How can I use my TV screen as my disply for my lap top I plugged the cable now what do I do?
Can you help me?
-
How can I get my PC to open completely when I open a session?
How can I get my browser to open completely when I open a session?