Rejection of a document

Similar Questions

• What does incompatible cartridges?

  HP Photosmart 4480 CA

  incompatible ink cartridges

  This means that the printer has the incorrect ink inserted. This printer, if the United States should take cartridges black 74 and 75 Tri-color, as shown here in this link.

  Otherwise, if it's the ink that is used, then this is an error message which shows may be due to dirty contacts or other reasons and can be addressed with this document here. It is a rejection cartridge error document that proposes solutions that are designed to fix the incompatible error message you get. I hope this helps.

• Implementation of filter in the archiving of content

  Hello
  I want to use the filter that will check the extension of the file, the size, and comments (cannot be null) before check-in.
  If the size is less than 50 MB, extension is .bmp or comment is null, then the filter will not allow check-in.
  I am using the CHECKIN_NEW service and then verification of the XCOMMENTS fields in the postWebfileCreation filter.
  I'm getting server log correctly but your content is checked-in that same doesnot content matches criteria required.
  Please help me.
  Thank you

  Hey

  I got a simple component that works on my sandbox machine that rejects the archived documents that are on a size preset.
  I used the "validateStandard" event to attach to and got out the size of the file based on the following code:

  String pFile = binder.getLocal ("primaryFile");
  If (pFile == null | pFile.length ())<>
  {
  NO primary file available
  SystemUtils.trace ("system", "Impossible to recover primaryFile binder... skip filter");
  Back to CONTINUE;
  }
            
  SystemUtils.trace ("system", "Archive" + pFile);
            
  PrimaryFile file = new File (pFile);
  If (! primaryFile.exists ())
  {
  SystemUtils.trace ("system", "Could not load file.");
  Back to CONTINUE;
  }
            
  long fileSize = primaryFile.length ();
  If (filesize > = 10000000) //10 meg
  {
  throw the new ServiceException ("this document is too large:"+ size ");
  }

  HTH.

  See you soon,.

• How accept/reject green/red changes in a Document comparing the CMP FM

  I work in FM 11 and to merge a file two writers that worked at the same time with the different sections of this update file. I used the FM utility > Compare Documents. The result CMP file showed me the text inserted in light green and the text deleted in red. How do you accept/reject these changes? My solution is to retype what I wanted to keep and select Delete I wanted to delete text.

  I also tried to use SVN update to merge the files, but does not seem to be able to merge my two SVN files (even if SVN merges a text file that user 1 set to DAY before they COMMITTED their change. UPDATE merges the writer 1 changes in the working copy of the writer 2 without change of 2 disturbing writer. Then the writer 2 could COMMIT. But that only worked on a TXT file and did not work with FM files. With FM, just SVN wouldn't let writer 2 DAY if his copy was not in harmony with the committed copy.

  Ideally, I would like to be able to merge the changes on the same file from two writers have updated from various sections. Any suggestions? Thank you.

  The utility of comparison only adds simple conditional tags to show the differences in a new combined version. Accept/reject only works with the track text edit modes, but you can not follow the text changes when writers attempt to simultaneously work on the same file.

  You're probably better off splitting into smaller sections so that the changes can be done simultaneously. Then use the book feature or a new file with text overlays to assemble things.

• After update to Acrobat 10.1.5 older documents are rejected. Error: the document is damaged.

  After the update to Acrobat 10.1.5 older documents are rejected. Error: the document is damaged and cannot be repaired. Is there any help?

  The file actually has a problem, we have published a document explaining the problem and a workaround:

  http://helpx.stage.Adobe.com/Acrobat/KB/PDF-error-1015-11001-update.html

  Please try and let us know if it works for you.

• I am trying to edit music digitized using Adobe Acrobat DC on a Lenovo tablet, Windows 7 operating system.  Adobe Acrobat DC rejects the analysis as unchangeable.  I export to a word document and re-export to AADC in pdf format.  It will then allow to cul

  Hello.  I'm currently editing digital music pdf using Adobe Acrobat DC on a Lenovo tablet with Windows 7 operating system.  Adobe Acrobat rejects the analysis as unchangeable.  I export the scanned pdf to MS Word and re-export to AADC in pdf format.  This can be cropped, but the edit function does not allow the movement of the measures (or 'skin measures text') within a team.  I am producing pages with 3 litters per page and 3 measures by staff who can be sufficiently enlarged to a blind musician.  My failure to change the measures so far means there is too much information by page and the page can be expanded properly. Advice please.  Thank you.  Charles.

  This is well beyond what Acrobat is intended - not just a little far, but a lot. PDF is therefore completely inappropriate for this.

  Address bits scan and cutting/organizing her before making a PDF. Maybe in Photoshop.

• AWM rejected documents defining

  Hello
  
  I know that I should obtain a number of rejected files while loading one of my cubes, but in mn after obtaining 100 of them, the load stops.
  I know how to change the maximum number of records rejected in sql, but awm always starts the load with the evolution of this number to 100. How to avoid or set another number to use as registration number rejected max? I know there must be somewhere...
  
  
  
  Thank you for your help :)

  Hello

  What version of AWM do you use? If you use 11.2.0.1A (available here:-http://www.oracle.com/technetwork/database/options/olap/olap-downloads-098860.html) there is an option under the tools-> configuration menu option.

  If you are using an older version, then I think you need to upgrade your version of AWM to achieve this functionality

  Thank you

  Stuart Bunby

  OLAP blog: http://oracleOLAP.blogspot.com
  OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
  OLAP OTN: http://www.oracle.com/technology/products/bi/olap/index.html
  DW OTN: http://www.oracle.com/technology/products/bi/db/11g/index.html

• new numbers does not open old documents

  So when I have updated the computer my version of numbers updated. Now I have problem trying to open old documents & have to choose the version of numbers to use. Super irritating. Why have I not 2 versions of numbers instead of a updated version that works well for all my files of numbers?

  You had iWorks ' 09 (numbers v2.3) installed. When you have installed v3.6.1 numbers (a completely different application), he moved silently Numbers ' 09 v2.3 in Applications: iWork ' 09 file. 3.6.1 numbers will open spreadsheets of calculating Numbers ' 08 and ' 09, as long as they do not include features that are not supported in numbers 3.6.1.

  If you click on the red light on the title bar left to close a document, it does not actually stop Numbers ' 09. The application continues to run and will be in ambush of any attempt to open a Numbers spreadsheet. When this worksheet is created by a rejection any numbers v3, you will get the following message:

  

  because the architecture of document numbers v3 is not compatible with Numbers ' 09. The solution is to actually leave Numbers ' 09 and then just double-click the spreadsheet him open correctly in numbers 3.6.1.

• How to print a document with the comments appear?

  I try to print a document Pages and I want the comments to be visible. They disappear in the printing process. Thanks for any suggestions!

  Hi Sara,.

  Any rejection of Pages v5 (including v5.6.1) cannot print comments. The function is not supported. You can however, export your Pages to Word .docx document, and the comments are going to survive.

  Open the Word in the free LibreOfficedocument and its printing Panel has options not only for the printing of comments in a Word document, but you want those displayed. This is due to LibreOffice using a panel of print custom. These are present in the tab more as shown below:

  

• Sync rejects the key?

  Try to configure a synchronization on a different OS (even portable, although: Linux and Windows); FF tells me that the key is not valid. It's the key obtained from another installation via the button "manage."

  On the side of Linux is, apparently, connected and works with synchronization. Now, I try to activate the side Windows.

  I tried to paste in a document visible text for both facilities; He has rejected it. I tried 'Save' - ing it from the side of Linux; I opened this file the side winning and new HTML copy / pasted - rejected. I removed the dashes: rejected.

  I was careful to not get foreign line-feed/return selects the string.

  (UPDATE: I a third system, also the installer with the same account synchronization, and is the key, he suggests the key from the first system functioning properly.) It does not put the key in the browser that is currently not connected. So the two operating systems DO synchronize properly and show the same key, which indicates that the account itself is working. «(It's just this third system who do not have the key for some reason any and used to synchronize).»

  Does anyone have a suggestion?

  Thank you
  J

  Well, I don't know about the latter problem, but I'm glad to hear that you are on now.

  May you click on the 'Resolved' (or useful) so that others can find it, when you do a search on Google for the same problem?

  Thank you.

• Tecra A4: Bios password rejected: keyboard hardly available?

  Before you travel, I decided to protect my work laptop (Tecra A4) with a Bios password and a hard drive password.

  I have am went into Bios, entered the master password, went to page 2, enter disk password, rebooted, got the requested password, type it... rejected. Tried 3 times and the laptop crashed.

  What happens here? I * know * the password I typed, as I typed twice in the Bios screen, so I'm * sure * of what I typed.

  so I'm suspected a problem of keyboard layout, as I have a QWERTY layout.

  Is it possible that when the administrator Bios available is one way and the initial password screen, another way? I used 'a' and 'm', the letters that move between Qwerty and Azerty.

  Of course I tried to type my password with 'q' instead of ' a 'and'; ' instead of 'm', but no use.

  I'm locked up. It's driving me crazy.

  Any help welcome,
  David

  Hello

  I studied a bit on the Toshiba site and found this Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB5A0164000IR01.htm

  Well, if you won't solve this problem, you will need to contact Toshiba.
  It may downgrade the BIOS or remove the BIOS password.

• Pages RIP, sad story... Spacing inside in the long Document

  Well guys, today as the author of the book I have says RIP Pages and I am looking for different processor. This coz really "filled my heart,' I've got a few days before the date of the release of the book.

  Is this true? The installer inside the spacing of cant pages? OK I tried to model in LibreOffice and opened in Pages - surpriiiise, Pages unfortunately unable to display this type of pitch? Oh... my... God...

  So I do not have the chance to make Pages more, inside the spacing kill my workflow and questions to copy paste images of pages of quality.

  You know, I love coz written Pages tru his smooth, flexible, fast and easy, I love the cropping of the images, I love how fonts - look like, but I think that Pages need really updated for serious work... not only this optimizations for that freaking Sync compatible iOS - Finally, I don't know many people who use pages on iOS.

  If anyone has an idea how to solve this spacing in Pages, please let me know...

  

  You are preaching in a community of support to users, and Apple isn't here.

  LibreOffice is intentionally written as a product of replacement of MS Office of superset. It has facing pages, related executives, and the possibility of placing several sections within these frameworks. Pages ' 09 v4.3 was the last version of Pages in support of face-to-face and related areas of text pages. Any rejection of Pages v5 (2 years and above) has these capabilities. I can put on a single page in Pages v5.6.1 that looks like one of your pages, but cannot provide the flow of documents in this format, because it is not supported.

  Since you have this work in LibreOffice, can use this product with support functions solid writer.

  The following was done with a text box on the left and a form of white circles on the right. Purely academic exercise to demonstrate a unique layout.

  

• How to disable "accept/reject" 5.6.1 green feature pages

  I have recently updated to El Capitan on my macbook pro and have pages version 5.6.1 (2562) and notice that when I go in edit an existing document (have not seen this on docs newly created) it appears a little green box asking me to check an accept or reject the change I just made.  How can I get rid of this annoying feature?

  Unless you need to track documents, you can turn it off via the page editing menu: Turn Off followed, or through the element of menu last shown on this screenshot.

  

  The Green and red dots did not appear until I clicked on the adjacent arrow to 4 changes to scroll my changes. These color elements also appears in every change in the sidebar comments and changes, which can be hidden via the button view located on the left side of the toolbar of the Pages.

• After resetting the NVRAM C309a rejected all new cartridges

  How to fix c309a after resetting the NVRAM rejected all new cartridges, for an ox610000fb mistake made semi nvram reset done

  after reboot, asking all the cartridges to replace? help is appreciated.

  Unfortunately, I think that the printer is irredeemably right now especially if you did a reset full semi and still get an alphanumeric message. I have a document that I can link to for you on the error codes alphanumeric on this printer, which I will give you. But at this point, you must call to HP Total Care for assistance. Here is the link to this document.

• Is it possible to get a document imaging metadata standard (like dDocId, dDocName etc.) to switch to the BPEL workflow?

  Environment : Webcenter 11.1.1.8.0

  Requirement : need to make a call from RIDC of BPEL with Java embedding inside workflow.

  Use case :

  1. The ODC, scans a document and commits to IPM with metadata in the document.
  2. A user will be notified of this validation using a BPEL process.
  3. If the user refuses this document, I need to remove the document content server.

  My questions are :

  1. How to get standard metadata of the document in IPM to move to a BPEL process to call an RIDC from there? (with Java Embedding inside).
  2. We can remove a document from the system, on which the workflow is triggered? Side effects due to this deletion?

  Any suggestions is greatly useful.

  Thank you

  Abhishek K

  This deletion causes a negative effect?

  Technically, it should not cause any negative effect, but in my experience, a rejected document is not deleted as the first choice - well instead, a rejection could trigger a branch in the process or to provide additional details, correct bad numbers (possibly with a new revision), etc.

  Note that a document usually triggers a business process, so it would be good to put an end to this process in a graceful way.