Relative motion

Similar Questions

• SoftMotion and FPGA OR 9514

  Hey Gang,

  I spent the day to set up a new system of cRIO and a new installation of LV2012 RT and FPGA Softmotion.

  Our system uses a CAN interface, which, we learn, requires the use of FPGA mode.  Maybe this isn't a bad thing, because we are concerned about the speed of the scan mode.  I developed an FPGA application before.

  My main concern is right now, to get the job of control of movement stuff.  Our movement is a NI - 9514.  I hope there is a way to use the SoftMotion modules with the FPGA interface. Otherwise, the movement FPGA examples look REALLY discouraging!

  All I do is homing and simple relative motions.  I enjoy all help/advice on the simple/fast way to get there.

  Thank you!

  Roger

  Hi Roger,

  You can use the 9514 without using the "formidable" examples using the cRIO in hybrid mode. There are good instructions on how to do it here. A quick summary, is to put the modules you want to use in scan mode under the chassis and modules you want to use FPGAS in the FPGA. When you compile the FPGA bitfile, RIO scan interface is compiled for modules that are under the chassis so that you can use in scan mode. A few warnings:

  • The FPGA VI must be running to use the 9514. When you are in scan mode, the FPGA runs automatically without requiring you to do so. However, in hybrid mode, the FPGA does when you run it explicitly.
  • The FPGA VI should work for deploy you the settings of the axis of the target. This can be a bit awkward during development when you make changes to the configuration of the axis. Usually, you run the FPGA VI using the open FPGA VI reference in a RT VI. However, when you run a RT VI, it checks to see if the deployed data are compatible with the project data and if not, invite you to deploy. Don't forget, however, that you cannot deploy your FPGA VI because is not yet running (since it won't work until the open FPGA VI reference runs). When you try to deploy, you will get an error (I think it's something like "E/s Module not found"). What I do usually is during development, run the FPGA VI manually (by pressing the run button). You can then run your VI RT which uses the FPGA VI reference and everything will work. You will encounter this problem only if you change the configuration of the axis of the project (and so won't be a problem for your final application when changing your aern can't axis settings). If you change the configuration of the axis programmatically, you do not experience this problem.

  As a note side for those who use the 951 x modules of movement, unless you really need to do something custom, you must use the modules of 951 x in scan mode. The performance is better in scan mode it is using FPGA (assuming you want to use the API SoftMotion high level (EXVIs, blocks of functions or properties/methods)). When you use FPGA mode, there is further delay to obtain the data of the FPGA in the SoftMotion engine. In addition, you are always coupled to the scan engine! If you get the worst performance, a more difficult experience, and you don't even remove the need for the analytical engine. There are valid reasons to use the modules of 951 x on the FPGA (for example custom control loops), but most applications I've seen use FPGA would be better served by using the module in scan mode.

  Thank you

• Request: Make these more fast screws for large tables

  Hey everybody,

  Did anyone mind take a look at these two screws? They work very well for small data sets, but they are starting to take up to 200ms each for large arrays (~ 5000 rows x 2 columns). The first actually sends data to the 2nd, so the total delay when running these screws may be 400, 500 ms. Too much to use them in real time.

  Reminder of how they are used:

  The user can click or click-and - dragging on a graph of intensity to create a card to die to test. These VI are run to update a list of that die are selected and a list of how the machine will move. In mode click - drag, these VI create a very big delay in the response of the public Service.

  First VI:

  The entrance is a 2D table 1 or 0, indicating the test or not test. The output is a 2D line (Nx2) table, column numbers should be probed.

  Second VI:

  The entrance is a table 2D (Nx2) R, C numbers (from the 1st VI). This VI calculates a relative movement of the current matrix with the following matrix. The output is a table 2D (Nx2) of the relative motions (Y, X). Example: ((2,4), (5.1)) back in ((0,0), (3, -3)).

  I've already cut the running time up to half of what it was, but it is still not fast enough. And Yes, the limits of error are not connected, I know :-)

  Screws (also attached):

  

  

  So, what do you think? Is there some Subvi I don't know which completely replaces the 1st VI? Is one of the Subvi I use inherently slow?

  
  

• Motion - Final Cut title - related text alignment

  I created a title Final Cut in Motion 5.

  Then I copied the text to a different layer and created an animation.

  The text of the first, is published, so I can customize later for Final Cut Pro X.

  So the second text corresponds to the text of the edited user, I've added a link to the text using the source: Object.Text, Object.Text destination.

  When I use it in Final Cut, the text is changed and I can even looking fonts, size etc.

  The problem is, that the second text alignment is left, I even specified that it is centered.

  How can solve this problem?

  I can link somehow the alignment of another text?

  Here's what it looks like in Motion 5:

  

  Here is the title in Final Cut Pro X, where the animated text left aligned instead of centered:

  

  Want to make a copy of the Clone of the text layer, not bind.

• HP ENVY 17 Leap Motion SE: Dual boot Windows 10 with 8.1 - Start menu screen does not always watch.

  I bought the full version of Windows 10 House because I want to keep my factory installed Win 8.1 x 64 and dual boot with the new OS.

  Installation went without problems - on a partition separated after the reduction of the C: partition by default, but when I restart my PC, start menu does not always appear for make me decide which system to choose and the computer boots directly to Windows 8.1.  I even turned off "time to display list of operating systems" when Windows 10 is selected by default OS, but when I turn off my PC for a short period and put back on, I am greeted by Windows 8.1

  Could be a bios or partition related question? Any help is appreciated! Thank you!

  Laptop: HP ENVY Leap Motion SE 17 - j110ea with 2 sata drives.

  Intel Core i7-4702MQ, 8 GB of RAM, with factory installed Win 8.1 home x 64

  VVel wrote:
  

  Thanks for the quick response!

  Workaround1 led display start menu classic that works, but disappears again, after closing down. When I turn on the computer, the last used OS is loaded, without the menu. If I do a restart and not close, the menu is back...

  (......)
  The start menu is not displayed, but at least the OS startup time is faster.

  Hello

  Thank you for posting this and for letting me know it now works for you (which is acceptable to you).

  In fact, what you describe above is not a bug, but it should. This is because Microsoft has changed a bit the boot process and the stop function since Win 8 (which means Windows 8, 8.1 and now 10). Instead of the stop full as in Windows XP, Vista, 7, Windows 8, 8.1, and 10 (when he is chosen to turn off) will stop, but closing them is a kind of hibarnation. For this reason, what describe you above is going on (he begins the latest OS because it was really completely out).  Full done restart restarts and it meets the place where the OS is selected.

  More information-> http://www.techrepublic.com/blog/windows-and-office/how-windows-8-hybrid-shutdown-fast-boot-feature-works/

  This mode ensures a faster start-up (on cause of so-called half restart).

  A workaround for this (works on Win 8, 8.1 and should also work on Win 10):

  http://www.howtogeek.com/129021/how-to-do-a-full-shutdown-in-Windows-8-without-disabling-hybrid-boot/

• What advice to post cRIO related issues?

  Mr President.

  What advice should I post cRIO regarding Questions and doubts about my application with cRIO. Please help me already that I posted in motion control readers that my application is related to the command of the engine using cRIO.bu, I get no answer .i couldn't find any cRIO associated consultant Board option select.

  Hi illa,.

  You can post your query under the measure in real time and control

  http://forums.NI.com/T5/real-time-measurement-and/BD-p/280

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Motion Eye is not working on my Sony Vaio vgn-fw33g

  Hello

  my motion eye does not work on my vaio vgn-fw33g after that I have improved my vista home os to win 7 pro. can advise the link for this driver? TKS

  http://answers.Microsoft.com/en-us/feedback/forum/fdbk_commsite-bug/please-try-again-later-more-site-performance/70be8dc5-d73d-49D1-95e7-2efc4661aa71?page=3#LastReply >

  Hey Jan Yap,

  This problem may be caused by the incompatible driver Motion Eye Video Capture Device. A test to see if your motion eye works very well with the software provided by Sony.

  Try these steps and see if it helps.

  Step 1: download and install the last eye movement Sony software

  http://www.Sony-Asia.com/support/product/VGN-FW33G

  Step 2: Download and install the latest drivers:

   

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  2. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. In Device Manager, locate the imaging devices, and then double-click the device name.
  4. If an error code has been generated, the code appears in the status area of the device under the general tab
  5. Click the driver tab and then click on put the driver update and follow the instructions.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, you can also try installing the driver in compatibility mode and check if it helps.

  See: http://windows.microsoft.com/is-is/windows/make-older-programs-run#1TC=windows-7

  You can check with Sony to known problems

  http://eSupport.Sony.com/

  It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

• In first items 14 scene selection from the Menu movie (Motion, holiday, Christmas frame) does not bind the scene 6 main Menu page. It places the scene 6 2 Menu scenes, but unrelated to the other, the main or scene selection Menu. What it

  How can I edit a movie Menu template? I use a Motion - celebrations and events - model of menu for Christmas related to 6 scene markers. Five scenes are represented by a thumbnail and name on 1 Menu scenes that appears when the button on the main menu page scene selection is reached. However, the scene 6, which has also a sticker and marker corresponding scene, is on another page (Menu 2 scenes) that does not link to the home page (does not appear in the scene selection Menu that has just 5 thumbnails and an arrow to return to the main Menu). In the area of work under the clip monitor Main Menu 1, Menu 1 and Menu 2 of scene scene appear together and by clicking on the thumbnail in the scene 2 menu the link to the clip 6 works except when Preview Disc is played, in which case the Menu 2 scene disappears. The scene marker is correctly linked, it just does not appear in the menus of the finish. The first five items of the Assembly (related to the scene selection menu) are all the video clips, but the 6th clip is a slide show. I read several threads on menus but found no mention that a slide show scene marker is treated differently by a menu template. Is it? The 5 first clips are all in the format AVI - DV with imported project files previously saved in this format, so that they could be related and engraved on a DVD. The slideshow is imported from PSE14 and 6 attached clips have already been burned successfully on disk (without menu) as a try-out. However, I was not satisfied with the resolution, then saved individually at the only other resolution DVD - SD576. Now I'm stuck at getting this sort menu. I operate 10 WIN. Any help will be accepted with gratitude.

  Hi, thanks for your response. I can rephrase the question very easily: why I've been so stupid? My problem was that I couldn't see a link in the menu between the Menu scenes 2 template and the main Menu. It turns out that the link was there all the time (a sideway arrow just above the main Menu link) but I thought he was part of the link from the main Menu and never clicked on it. When I burned my project to a disc and played on television, the sideway arrow was a different color and, of course, another link... the link I was looking for. Then, my apologies, problem solved, lesson learned - click on everything you see. Thank you. And I was very happy since the upgrade to 14 before except when it makes me feel stupid, which is frequently.

• Synchronization between RDF store and relational table

  I start this question in a new thread, as it goes in a field of another problem

  Is one of the option to model the attributes of the object to store the attributes in a separate relational table and a SQL allows to attach graphic query results. Now, here's a situation, if we want to join, we need to keep a few key reference in the RDF data store, so that they can join together. But it leaves a question, how do synchronize us data? Suppose that we keep a user node in RDF with the user ID property and keep all other modules in the relational table. When join us, we can reach by user ID. But if we remove this record from the user in the relational table, probably RDF will not delete this user node in the graph data store. Am I correct on this point or Oracle has a sort of way to maintain data synchronization?

  Thank you.

  Hi HansC,

  Sorry for the late reply.

  When a row is deleted from a relational table, its correspondent/associated triple (s) will NOT will be removed one or more RDF models unless there is a custom logic to handle this.

  For example, we can define a trigger on the relational table to manage the synchronization of the data. Another way is to use the existing track changes

  mechanism (motion Flashback, Golden Gate etc.) to preserve the synchronization data.

  Thank you

  Zhe Wu

• Entries related to the movement commands

  Hello guys,.

  Oracle EBS R 12.1.3 on linux,

  I create a report on Inventroy order in which I need to show the flow rate and the credit account against each line, I developed the report on the Tables of

  MTL_MATERIAL_TRANSACTIONS

  MTL_TXN_REQUEST_HEADERS

  MTL_TXN_REQUEST_LINES

  MTL_SYSTEM_ITEMS_VL

  GL_CODE_COMBINATIONS_KFV

  ORG_ORGANIZATION_DEFINITIONS

  PA_TASKS

  These tables show all of the required fields related to order but I can't find the details of the accounting of these tables means these tables don't watch what account has been debited and who has been credited as a result of the move order transaction.

  Any help will be appreciated.

  Hello

  Usually the account code you enter in the line of motion control gets charged, and inventory assessment account gets credited for a transaction to move the question of command.

  You can refer to the cst_inv_distribution_v view for details on the accounting for a transaction in inventory.

  Transaction_id column can be used to find the values of debit and credit for an operation particularly important while the BASE_TRANSACTION_VALUE column keeps the real value.

  I hope this helps.

  Thank you

  PS.

• Data-driven related cfselects

  I have a page with selects related where I want to spend

  User name (select 1 out of a query) > an available date (2 select another query) and a hidden field (userID of cfquery to select 2)

  all this for an action for INSERTING page.

  I couldn't find a way to do it using CFCS, and they advised me to try jQuery. I couldn't find anything quite like that, but found the JavaScript below.

  When I tried to adapt, I found (of course!) that it does not work with dynamic values in chose him because I do not have a way of moving from an argument, as

  I did it in the functions in the CFC.

  Is there a way of linking dynamically populated CFSELECTS using javascript (JQuery, perhaps)? While I can control what happens right on my page, instead of

  leaving the CF Server?

  http://Snipplr.com/view/26338/cascading-select-boxes/

  " < script type =" text/javascript"src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.3/jQuery.min.js "> < / script > .

  < script type = "text/javascript" reporter 'reporter' = >

  function cascadeSelect (parent, child) {}

  var childOptions = child.find ('option: not (/dev/.static/dev/RTC)');

  Child.Data ('options', childOptions);

  {parent.change (Function ()}

  childOptions.remove ();

  child

  . Append (child.data('options').filter ('.sub_' + this.value))

  . change().

  })

  childOptions.not ('/dev/.static/dev/RTC, .sub_' + parent.val ()) .remove ();

  }

  $(function() {})

  cascadeForm = $('.cascadeTest');

  orgSelect = cascadeForm.find ('.orgSelect');

  terrSelect = cascadeForm.find ('.terrSelect');

  locSelect = cascadeForm.find ('.locSelect');

  cascadeSelect (orgSelect, terrSelect);

  cascadeSelect (terrSelect, locSelect);

  });

  < /script >

  For reference, here's the CFC, I tried earlier. ************************************

  And in fact, I had to change the returntype of "table" to the "motion" in order to pass both the

  ModelSelected and the Session_Date. I couldn't find a way to spend Emp_Id, that's why I'm

  While watching a javascript or JQuery solution.

  < cfproperty output = "false" >

  < cfset THIS.dsn = "cf_01" >

  <!--> get array of names of

  < name cffunction "getNames" returntype = access = "remote" = "array" >

  <!--> set variables

  < cfset var data = "" >

  < cfset var result = ArrayNew (2) >

  < cfset var i = 0 >

  <!--> get the data

  < name cfquery = "data" datasource = "#THIS.dsn #" >

  SELECT Emp_Id, name, SelectionDate, ModelSelected

  OF Laptop_Selection

  ORDER BY name

  < / cfquery >

  <!--> results converting it into table

  < cfloop index "i" = from = "1" to = "#data.» RecordCount #">"

  < cfset [i] [1] result = data. ModelSelected [i] >

  < cfset result [i] [2] = data. Name [i] >

  < / cfloop >

  <!- and return it - >

  < cfreturn result >

  < / cffunction >

  <!--> get dates by model number

  < cffunction "getDates" access = returntype = name "remotely" = "query" >

  < name cfargument = "ModelSelected" type = "string" required = "true" >

  <!--> set variables

  < cfset var data = "" >

  < cfset var result = ArrayNew (2) >

  < cfset var i = 0 >

  <!--> get the data

  < name cfquery = "data" datasource = "#THIS.dsn #" >

  SELECT Session_Date, Emp_Id

  OF Laptop_Rollout

  WHERE session_name = ' #ARGUMENTS. "ModelSelected #

  ORDER BY Session_Date

  < / cfquery >

  < cfset SESSION. EmpID = data. Emp_Id >

  <!--> results converting it into table

  <!--

  < cfloop index "i" = from = "1" to = "#data.» RecordCount #">"

  < cfset [i] [1] result = data. Emp_Id [i] >

  < cfset result [i] [2] = data. Session_Date [i] >

  < / cfloop >

  <!- and return it - >

  < cfreturn result >

  ->

  < cfreturn data >

  < / cffunction >

  < / cfproperty >

  I took advice from another post and decided to stay with CFC, who works for me and I want to continue studying.

• Advanced shares custom motion path effect?

  Hello!

  I try to use advanced with a motion path effect Actions and cannot operate.  Basically I want a click is enough to lead to a path of"right to left" effect and a reveal of a text box.  I want the subject to go to a certain place, however not only the default value from right to left.  I thought I would create a tip Action that would have the effect, then a 'show' for the text box.  Unfortunately, it won't let me not customize the path in this way.  I am able to create a click box that can trigger the effect path the way I want to, but then it does not raise the revelation of text box at the same time.  (so, I thought that advanced actions would be the way to go).

  I also tried to save the effect in the Gallery thinking that I would then be able to use from the advanced Actions screen, but it does not appear.

  Any ideas/insight is appreciated!

  Hello

  Where is - it has you registered the custom Gallery effect? I know that if you save it in a custom folder, it will appear in the drop-down list advanced actions. I have applied this custom effects. You can try this? To prove that I checked this:

  

  ATTENTION: you can not time the effect in advanced actions, so don't forget to save the custom effect with the correct length compared to the total chronology of the object to which it is applied. When you apply an effect to an object with a different duration timing timing will be changed to have the same relative duration. Quite while ago I blogged about custom effects:

  Reuse of the custom effects

  Lilybiri

• Is it possible to listen to a motion tween and use an event handler to do something?

  I looked at a few tutorials Manager tween event but could not understand how to operate with the below. I copied the code in 'tween and paste it into a framework that presents an animated character. I want the character to run across the screen, and after the Tween is finished, I want to be able to jump to a different image.

  Thank you.

  [AS3]

  Import fl.motion.AnimatorFactory;
  Import fl.motion.MotionBase;
  Import fl.motion.Motion;
  flash.filters import. *;
  to import flash.geom.Point;
  var __motion_run:MotionBase;
  if(__motion_run == null) {}
  __motion_run = new Motion();
  __motion_run. Duration = 24;

  Call overrideTargetTransform to prevent scale, tilt,
  or values of rotation is made relative to the target
  transformation of the original object.
  __motion_run.overrideTargetTransform ();

  Subsequent calls to addPropertyArray assign data values
  for each property interpolated. There is only one value in the table
  for every frame of the tween, or less if the last value
  remains the same for the rest of the frames.
  __motion_run.addPropertyArray ('x', [0,14.7826,29.5652,44.3478,59.1304,73.913,88.6957,103.478,118.261,133.043,147.826,162.609, 177.391,192.174,206.957,221.739,236.522,251.304,266.087,280.87,295.652,310.435,325.217,34 0]);
  __motion_run.addPropertyArray ("y", [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]);
  __motion_run.addPropertyArray ("scaleX", [1.000000]);
  __motion_run.addPropertyArray ("scaleY", [1.000000]);
  __motion_run.addPropertyArray ("Scewx", [0]);
  __motion_run.addPropertyArray ("transformations", [0]);
  __motion_run.addPropertyArray ("rotationConcat", [0]);
  __motion_run.addPropertyArray ("blendMode", "normal");
  __motion_run.addPropertyArray ("cacheAsBitmap", [false]);

  Create an AnimatorFactory instance, that will manage
  targets for the corresponding request.
  var __animFactory_run:AnimatorFactory = new AnimatorFactory (__motion_run);
  __animFactory_run.transformationPoint = new Point (0.500000, 0.500000);

  Call the function on the AnimatorFactory addTarget
  instance to target a DisplayObject with this Motion.
  The second parameter is the number of times where the animation
  going to play - the default value 0 means there will be a loop.
  __animFactory_run.addTarget (lancer, 1);
  }

  [/ AS3]

  You create an interpolation of manual editing and then copying the motion as AS3 code (which looks always a little weird, compared to your animation with AS3 from scratch with Adobe fl.transition package, or greensock TweenLite, or any other 3rd party tyween engine of coding). And I presume that eager to customize it with a completion event detection.

  First, familiarize yourself with the AS3 package that defines such things when you use Flash to convert your tweens as code:

  Package: fl.motion

  http://livedocs.Adobe.com/Flash/9.0/ActionScriptLangRefV3/FL/motion/package-detail.html

  Here you will see classes in this package. And there is an interested, MotionEvent.

  MotionEvent

  http://livedocs.Adobe.com/Flash/9.0/ActionScriptLangRefV3/FL/motion/MotionEvent.html

  Right at the top of this page is an example of adding an event listener, which I'll paste here...

  import fl.motion.MotionEvent;
  abox_animator.addEventListener(MotionEvent.MOTION_END, afterMotion);
  function afterMotion(e:MotionEvent) {
     trace("animation complete!");
  }
  

  CS4/CS5 names your class objects of movement as "__motion_SymbolName". In your case, it is __motion_run. As above, to add the event to your object, follow these steps:

  import fl.motion.MotionEvent;
  

  __motion_run.addEventListener(MotionEvent.MOTION_END, afterMotion);
  function afterMotion(e:MotionEvent) {
     trace("animation complete!");
  }
  

  If you're curious about making all your animation from scratch using the code, I highly suggest to check greensock Tween engine:

  http://www.greensock.com/

• Motion JPEG AVI codec not supported by Adobe Premiere Pro CS4?

  Hi all

  First of all, I must say that English is not my mother tongue. Forgive me if I make spelling mistakes or if I write inpolitely, it is not the intention.

  I have a couple of videos made with a camera. The videos have an .avi extension and a Motion JPEG codec. I can watch them on my computer fine with the two Windows Media Player, Winamp, or Quicktime. However, when I try to use them in Adobe Premiere Pro CS4, the videos are stuck after a few images (half a second), even if the sound is going very well. I am quite sure that this is a problem in Adobe Premiere Pro, because they DON'T work well in Adobe After Effects CS4. I tried to convert the video to another codec, but no matter what that the settings I use, there are still many quality loss.

  Nobody knows how to solve this problem in the first? I read the following document: http://kb2.adobe.com/cps/166/tn_16612.html but I don't quite understand, I'm not used to working with the property inspector or Lingo. If someone could explain this document to me it would be too good.

  Thank you in advance,

  Bib-lost25

  The link you provide is related to the Flash program and is not relevant to your problem.

  I don't know why the Mjpeg files work in some programs (including After Effects) and not first.  But the reality is that you need to add an Mjpeg codec. I love Morgan (although I don't have CS4 and it was inherited from my days of Pinnacle real files).

  There are other threads on this topic; try searching for "mjpeg".