removable disk does not detect

Similar Questions

• d: removable disk does not appear in my computer

  I tried to load Cd 2011 tax Turbo, it does not load.  I noticed in my computer that I don't have a CD/DVD storage.  I loaded the Turbo tax for many years and this is the first time that I couldn't.  I tried another CD and they won't run or the other.  I get a message saying load disk into drive G.  I tried to type in d, but cannot.

  Thank you

  Gloria

  Hello

  1. What is the status of the CD or DVD drive in Device Manager?
  2 have you made changes on the computer before this problem?
  3. What is the exact error message?
  4. do you mean to say that the CD or DVD drive icon is missing in Windows Explorer?

  Answering these questions could help us help you better.

  Reference:
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

• Removable disk does not remain mounted (HP EliteBook & advanced Docking Station)

  Hello

  I have a 8560 that connect me to HP 230W Advanced Docking Stations to each of my two workplaces. The 8560 p has a SSD drive and I use an identical SSD in the Bay of the docking station, which I use for automatic backups (I spend the SSD between two docking stations when I move locations) eSATA.

  It works very well at the start. After loading the disc, it is recognized by the Intel Rapid Storage Technology technology and presented as an "external drive" in the application of the Intel Rapid Storage Technology technology against the port of relevant (3). I can also see it in Windows Explorer and use it and work of backups when manually initiated.

  However, after a period of inactivity SSD in the docking station is 'removed' by Intel Rapid Storage Technology (pop up says that he has been removed from Port 3). If I go into the application of the technology Intel Rapid Storage Technology, it reports the port (Port 3) as 'empty '.

  I have to remove and reinsert the SSDS to get the Intel Rapid Storage Technology and Windows technology to recognize it again. It means always to my backups automatic (they are planned for the night) in case of failure.

  How to stop the disc being dismantled? I need that remains mounted until I have to physically remove or disconnect the laptop.

  I am running Windows 7 and have applied all updates of current Windows (using Microsoft Update) and HP (using HP Support Assistant).

  The SSD is a Crucial M4-CT512M4SSD2 (512 gb) firmware version 0009 (I'm aware that this is a firmware updated version and am upgrading, but don't think it is relevant to my current problem)...

  Thank you

  Nigel

  Problem solved.

  The issue was the Crucial SSD firmware.  V0009 I had apparently has a known problem with the recovery of unexpected power loss.  When the laptop slept or the HD has been disabled by the energy saver, it was not handled properly and the SSD froze.

  The SSD to 0040H firmware update solves the problem.

  Nigel

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Installation of Oracle 11 g R2 grid does not detect the ASM disks

  Hi guys,.

  I'm trying to install Oracle 11 g R2 RAC and as part of the installation of the grid, the Setup program does not detect the ASM disks.

  Here are the outputs for some commands.

  [root@rac1 ~] # oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  Instantiation of disk 'ASMDATA2 '.

  Instantiation of disk 'ASMDATA1 '.

  [root@rac1 ~] # oracleasm listdisks

  ASMDATA1

  ASMDATA2

  [root@rac1 ~] # ls - ls/dev/oracleasm/disks

  Total 0

  0 brw - rw - 1 grid asmadmin 252, 3 14 May 17:18 ASMDATA1

  0 brw - rw - 1 grid asmadmin 252, 2 14 May 17:18 ASMDATA2

  I already tried to reconfigure Oracleasm (oracleasm configure - i) but no luck.

  I would be really grateful for the help here as its been a few days now and want to complete the installation as soon as possible

  Concerning

  Praveen

  Thank you Ricardo, I see now the disks after you change the path from discovery to/dev/oracleasm/disks

  

• Drive hard internal suddenly does not detect.

  I have PC HCL, I have a hard drive 350GB WD blue, suddenly he is hanged and claimed restart. I tried to start it, but during the installation of time, he does not watch partition and it shows the total space (i.e., 300 + GB). then I tried to partition, but it does not work. After that I tried, this time, it is not all display drive and says there is no disc to install windows. How can I detect the hard drive and how to recover my data in the hard disk and how can use it again to install the inside windows. Please help me to do all this. at least suggest me to get my data to retrieve.

  Hi @PrincipalGovt. ITI!

  I'm sorry to hear what happened with the HARD drive, I know that this could be a very unpleasant experience.

  At this stage, given that the boot drive is still not detected, it will be better to try the troubleshooting steps basis in such situations.

  1. use another SATA cable, as the problem could be linked to this component.
  2. connect the hard drive to another motherboard SATA port.
  3. in the event that none of the above worked, then connect the HARD drive to another PC and see if it will be recognized.

  If all goes well, it will appear in the other computer and when he does then backup your most important data on another location. It is possible that the transfer rate may be slow, but nonetheless wait for the process to complete if your information could be sure. Once it is successfully removed, run a diagnostic test on the HARD drive with the manufacturer Data Lifeguard DIagnostics tool and see what results. You can download here:

  http://products.wdc.com/support/kb.ashx?ID=BKO7r8

  In the case where you've run these tests until you can follow the steps described in this article:

  http://products.wdc.com/support/kb.ashx?ID=noYuE0

  However, in case the HARD disk is not detected at all, then it will be preferable to a data recovery specialist and see if he or she will be able to help you recover your data back. There are a few partners listed on the official site data recovery, so you can take a look at this link if you want to:

  http://products.wdc.com/support/kb.ashx?ID=HpehiA

  Hope this helps and let me know how it went.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Tecra Z50-A-11V: new SSD but earn 8.1 does not detect

  We bought a M550 Crucial 256 GB drive and you want to replace in a Toshiba Tecra Z50 - Av1

  We don't want to make any transfer of data or cloned.
  We want to do a clean install with Windows 8.1
  The BIOS recognizes the SSD

  But when you install Windows 8.1 doesn't detect any disk connected to the device and asked additional drivers. Windows does not detect the drive

  https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
  https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
  https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

  I have also tested with version lasted this driver (old F6 to start to locate the hard disk driver)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapk w = f6flpy-x 64.zip

  and with toshiba package
  http://support.Toshiba.com/support/viewContentDetail?ContentId=4004211
  You can see that I have the version 3.20 BIOS. Interestingly, I see that the last one is the Toshiba has released version 3.1

  But still the CRUCIAL drive is not recognized by the instalation of windows startup

  The problem is similar with ubunto, kubuntu,... the drive is detected by the BIOS, but not for the OS.

  any help?
  Thank you

  Hello

  You solved this problem?
  Could you install system 8.1 Windows on this SSD drive?

  I think that the installation of additional drivers during the setting procedure isn't necessary since Win 8.1 should already contain pilots essential.
  From my point of view of the few, there could be a compatibility issue (maybe the SSD firmware update could solve that problem).

  What another SSD disk usage? You have the same problem with other SSDS from other manufacturers?

  Your comments would be appreciated.

• Satellite M105-S322 - HDD does not detect

  My laptop does not detect the hard drive. I press F2 to go into BIOS and it says hardrive No. I reinstalled the hard drive, but it still says the same thing. I have test the SATA hard drive on the desktop and it detects its.

  What seems to be wrong? Help, please.

  > I have test the SATA hard drive on the desktop and it detects its.
  This looks like your HARD disk on the motherboard controller is faulty
  But before that you exchange the motherboard but I would test another HARD drive maybe the HARD drive is faulty and will recognize only on certain computers or mothers.

  If a new drive HARD doesn t work too, your motherboard needs to be replaced.

• Satego x 200-BIOS does not detect SSD but windows 7 for OS usage

  need help here, I got the latest bios 2.50 and my bios does not detect the SSD but an I start windows 7 from my hard drive it is detected and I want to use the ssd as boot drive, please help

  Hello

  Which SSD drive you have exactly?
  I also think it s a compatibility problem between the HARD disk controller (motherboard) and the current SSD drive.

  So you should check if you have the latest firmware of the SSD drive and if it of possible, try another disc SSD of a friend, for example.

  By the way: have you tried to load the default settings in the BIOS?

• Satellite A500-19W does not detect battery

  Hello

  I have a portable Satellite A500-19W which is 6 months old.

  I bought this laptop while I was in Egypt and now I've moved (Dubai) UNITED Arab Emirates.

  Lately my laptop started suddenly does not detect battery.

  To remedy this that I have to remove the battery and clean the terminals then re - put the battery and turn it on and it's OK.

  This happened twice this week and caused my data loss because the charger is disconnected (if the charger is connected, the laptop computer continue to work, but the battery indicator does not light up)

  Now, my questions are the following
  1 - is this problem under warranty?
  2 - should I pay for anything when getting this laptop in service in Dubai noting that I bought in Egypt?
  3. is there a cure for this problem without going through the service center?

  Thank you

  1 / Yes. These questions should be covered by the warranty. Material is junk.

  2 / the nearest service contact and ask, but I'm sure you don't have to pay for the repair. The two countries are countries in EMEA, and avoid any kind of problems.

  3 / it is not much, you can do about it so please contact and explain the situation. They should check your laptop and find a reason why this happens.

  Don t waste your time and contact the closest service. If you have need for addresses and phone numbers you can find on http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.