Removal of the PC on the network window

Similar Questions

• removed from the network computers still will appear on the network map

  I have removed two computer laptop computers fom my network and removed in the network map.  They are no longer on the PREMISIS (sold).  Subtracting them to the magic of the network, I removed the network locking, set up as 'Follow-up as intruders' and they removed the network card.  I then reset the locking system.  When I bruing to the top of the map of the network, they are gone.  However, after a few minutes, as they appear again.  How can I remove them permanently from my network?

  Your network card is like showing wrong info. You can follow the steps on this link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=8571edab25b54432bfb7b7672a577b8f_19407.xml&pid=80&.... This is a guide for you refresh the service of the network magic software platform and then check if after doing the steps in the network card will always show the same information.

• Windows 2K 3 is removed from the network, every hour, sixth of its previous disconnection

  Hi all

  I have a problem here in a production environment. We use the combination W2K3 SP2 and SQL 2008. It is the server gets disconnected from the network, every hour, sixth of its previous logout. SQL resources are working well, but the server itself becomes not accessible. When I mean the server by its IP address or name DNS etc.

  While closely watching the issue, we found that even the RDP connection to it expires exactly at the same time. It's just an interruption of 10-30 seconds, and after him, everything is normal. Only clue is, it happens exactly every sixth hour. We also found his happens for all servers in the VIRTUAL local area network at the same time.

  Sixth hour that I mean, is the model... for example it happes to 09:15 then it will happen about 15:16 and then 21:17, then new tomorrow 03:18, 09:19, 15:20, 21:21 etc. If this isn't exactly every six hours, it every hour, sixth of its previous logout. The calendar is always in motion.

  Note:

  DHCP is not enabled on the server. Its configured to use a static ip address. The server is based. No DHCP server in the environment.
  Client DHCP is running on the machine to register DNS for the DNS server. No windows firewall is turned on.

  So its more like a configuration problem which is something set up to do something every time sixth from his previous instance.

  Please let me know if you think anything.

  Thank you
  Damien

  Hello

  We have a separate Department of Microsoft who work with servers. Thanks for posting your query in the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Thank you

• How to set the password to protect the network, Windows XP Home Edition

  Another PC can directly access my computer on the Windows network, so I want to set a password to protect my computer.

  There are two basic methods to connect to a computer through a network.

  The first is through Remote Desktop connection.  This method requires that a user connect as if they were sitting in front of the computer.  So simply assign a password for each user in the user Panel must control this access road.  If I remember correctly, Remote Desktop connections cannot do XP Home computers, so this may not apply to you.

  The second is through the sharing of files on the network.  With XP Home (forced Simple File Sharing), each connection sharing file valid as long as the user "guest".  So to control this access, you must assign a password for the Guest user.

  "Set up the password for the user in Windows XP"
    <>http://support.Microsoft.com/kb/555520 >

  HTH,
  JW

• LaserJet p2015 on XP cannot share on the network, Windows 8

  I have a computer running Windows XP with the installed printer P2015. With another computer running windows 8, I can find the printer on the network, but I can't find the drivers. I tried to install the printer directly on the Pc running windows 8, and it worked perfectly, without any driver. And when I installed it on XP, it did not work and asked a pilot.

  What can I do?

  After installing on the computer of windows 8, access the properties of the printer, and then choose the ports add port and when the box to put in the xp computer name and the name of the computer on this machine sharing. Use of the form \\computername\sharename save settings. Movement back of the printer to the Windows xp computer and see if now works now.

• removal of the old windows updates

  on my window vista home basic on disk-D computer were my new and find the old windows updates, I only 21.8 gigabits of 69.5 gigabites
  remaining. whenever I get windows updates and install them I have less memory remaining on this drive. my windows updates go all the way back to 2008
  When I bought the computer. Every month I do a backup on dvd. I don't store objects like photo, games or other long-term files.
  My question is it possible or safe to delete the old windows backup? I do a daily cleaning of windows.
  Is there anyone who can help me with this problem so I don't run out of space on the disc-D?

  Hello

  You do not remove the "old" Windows updates.

  If you do, you lose the performance and the improvements in security that they give and you put your computer at risk of breaking or be infected by malware...

  See you soon.

• Unable to connect to the network - Windows 7 on Windows Server 2003

  original title: Six Windows 7 computers running on a network (Server Windows 2003 R2 Standard Ed) would not connect to the network in the morning, startup repair is unable to repair

  We have 10 PC running Windows 7 on a network (Server Windows 2003 R2 Standard Ed) and 6 of them started up the Start Up Repair screen the same morning. Run startup repair but then received the message "Startup Repair cannot repair.

  Windows could not start. A recent change in hardware or software may be the cause. Startup Repair cannot repair.

  Details of the problem: event name offline Startup Repair

  Signature 01 6.1.76.00.16385

  02 6.1.76.00.16385

  unknown 03

  04 21200896

  AutoFailover 05

  2 06

  07 0x6b

  OS version 6.17600.2.0.0.256.1

  Locale 1033 ID

  In the details to diagnose & repair was the only entry that indicates a problem

  First cause is parameters 6 unknown error checking b 0 x 0, 0x0, 0x0, 0x0

  In all cases the system restore worked but had to come back a week, him the day before restore point would not work.  In one case, the problem is that system restore and the next day does not, eventually reinstall.

  Clues or tips as to what has caused this?

  Kind regards

  GinSeek

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Above links are for server communities.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot log on to a computer in the domain when it is removed from the domain - Windows 7 Pro, just stopped working

  We have a Dell laptop with the encryption used by the principal of our school at work and at home. At the office, it connects to the network via Ethernet. Yesterday, when he returned home, he received a message that it could not connect to a server approved.  His credentials have been cached in the past and still allowed him to open a session with the same user name and password.

  Now, when the laptop is not connected to the network, I can't log on to the laptop computer as a domain administrator, it cannot open a session with his account and the local administrator account cannot log on (localadmin\laptopname).  When I tried to add a new local user by using user accounts in Control Panel, I get a message that the domain is not available.  This field is the name of the computer.  Manage user--> Add--> domain accounts--> go--> locations<-- the="" only="" option="" is="" entire="" directory="" (my="" domain). ="" actually,="" this="" is="" all="" i="" see="" on="" my="" work="" computer="" too. ="" when="" did="" this="" change? ="" i've="" added="" local="" users="" in="" the="">

  The rest of Windows seems to work.

  Biometrics does not for one of our accounts, but they have in the past.

  I might add a local account for him to use only with the following command. At least this allows him to use the laptop at home, but it creates a new profile for him so he will not have access to the files saved under its domain account profile.

  net user USERNAME PASSWORD /add
  net localgroup administrators USERNAME /add
  

  AFAIK what has changed is that he was just updates installation before returned home and when he arrived home, things no longer work.

  Hello

  Please contact the Microsoft community.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Fax and scanning of reception on the network Windows 7

  We use Windows 7 Fax and Scan. Faxes come in the network server.  The problem I have is that I have to restart my computer periodically throughout the day to see new faxes. My computer seems to be the only one in the Office that this is happening. Our outdoor COMPUTER technician is able to resolve the problem.  Any suggestions?

  Thank you.

  Hello

  1. you are a domain network?

  2 How many computers are there on the network?

  If you are on a domain network, see:

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Removal of the network of virtual machines powered cards

  I wanted to remove the network adapters on multiple virtual machines, so I thought that he would do a simple script:

  Get-NetworkAdapter -vm test* | ?{$_.NetworkName -like "dummy"} |Remove-NetworkAdapter
  

  But this results only by mistake because the virtual machine is running:

  Remove-NetworkAdapter: 2013-08-13 15:58:48 NetworkAdapter Remove the

  Virtual MACHINE must be in the following State: PoweredOff.

  Is it possible to get around this problem?

  Given that this is possible through the vSphere Client he gave me the chance to try Onyx. Here is the result of the Onyx:

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.changeVersion = "2013-08-14T07:04:15.86208Z"
  $spec.deviceChange = New-Object VMware.Vim.VirtualDeviceConfigSpec[] (1)
  $spec.deviceChange[0] = New-Object VMware.Vim.VirtualDeviceConfigSpec
  $spec.deviceChange[0].operation = "remove"
  $spec.deviceChange[0].device = New-Object VMware.Vim.VirtualVmxnet3
  $spec.deviceChange[0].device.key = 4000
  $spec.deviceChange[0].device.deviceInfo = New-Object VMware.Vim.Description
  $spec.deviceChange[0].device.deviceInfo.label = "Network adapter 1"
  $spec.deviceChange[0].device.deviceInfo.summary = "dummy"
  $spec.deviceChange[0].device.backing = New-Object VMware.Vim.VirtualEthernetCardNetworkBackingInfo
  $spec.deviceChange[0].device.backing.deviceName = "dummy"
  $spec.deviceChange[0].device.backing.useAutoDetect = $false
  $spec.deviceChange[0].device.backing.inPassthroughMode = $false
  $spec.deviceChange[0].device.connectable = New-Object VMware.Vim.VirtualDeviceConnectInfo
  $spec.deviceChange[0].device.connectable.startConnected = $true
  $spec.deviceChange[0].device.connectable.allowGuestControl = $false
  $spec.deviceChange[0].device.connectable.connected = $true
  $spec.deviceChange[0].device.connectable.status = "ok"
  $spec.deviceChange[0].device.controllerKey = 100
  $spec.deviceChange[0].device.unitNumber = 7
  $spec.deviceChange[0].device.addressType = "assigned"
  $spec.deviceChange[0].device.macAddress = "00:50:56:8f:74:52"
  $spec.deviceChange[0].device.wakeOnLanEnabled = $false
  
  $_this = Get-View -Id 'VirtualMachine-vm-646'
  $_this.ReconfigVM_Task($spec)
  

  After the stripping it down a bit I ended up with:

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.deviceChange = New-Object VMware.Vim.VirtualDeviceConfigSpec[] (1)
  $spec.deviceChange[0] = New-Object VMware.Vim.VirtualDeviceConfigSpec
  $spec.deviceChange[0].operation = "remove"
  $spec.deviceChange[0].device = New-Object VMware.Vim.VirtualVmxnet3
  $spec.deviceChange[0].device.key = 4000
  $spec.deviceChange[0].device.deviceInfo = New-Object VMware.Vim.Description
  $spec.deviceChange[0].device.deviceInfo.label = "Network adapter 1"
  $spec.deviceChange[0].device.deviceInfo.summary = "dummy"
  
  $_this = Get-View -Id 'VirtualMachine-vm-646'
  $_this.ReconfigVM_Task($spec)
  

  Run this doesn't give any errors, but are still all NICs.

  Is there a way to easy or better for this script?

  You must create an entry in the DeviceChange property by the device you wish to reconfigure.

  Try something like this

  $VMs = Get-VM test*
  
  $NICs = 1..6 | %{"Network Adapter $_"}$i = 0
  
  foreach($VM in $VMs){  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec  $Adapters = Get-NetworkAdapter -VM $VM|?{$_.NetworkName -like "dummy"}  foreach($Adapter in $Adapters){    if($NICs -contains $Adapter){      $devSpec = New-Object VMware.Vim.VirtualDeviceConfigSpec      $devSpec.operation = "remove"      $devSpec.device += $Adapter.ExtensionData      $spec.deviceChange += $devSpec    }  }  $VM.ExtensionData.ReconfigVM_Task($spec)}
  

• connection to the network windows 2000 xp

  First of all, I know I use an old operating system but my accounting program is not beyond XP.

  My game is windows 2000 with two routers wired / wireless. The system works very well under the win2000 including access a system remote win2000. I am able to the internet via one router to another wireless. The I've seen is that I can't have the XP to see or join my local network. The win2000 see the XP but cannot go further than the display of files. the XP is set to shared the whole c drive.

  What Miss me on the definition of the XP to work with my win2000? Probably something simple I've missed or simply do not know.

  Note the XP is a system I have then given. He had a bit of virus and spyware that has been deleted and seems to be updated otherwise.

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://TechNet.Microsoft.com/en-us/ms772425

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Satellite A350-22D - cannot activate the network (Windows 10) wireless adapter

  With Windows 10 Wi - Fi worked well. Suddenly three days it s active no more
  FN + F8 does not work.
  The switch in front of the computer or the other.
  At startup, the computer recognizes the card and then turns off the front LED.

  The card WiFi Intel 5100 AGN and pilots the latest work well.
  I uninstalled and reinstalled but no result.
  What can I do to get my Wi - Fi works again?

  PS: when I've been upgraded to Windows 8, it had the same problem...

  This old notebook was designed for Vista and support for Win7. No more than that.
  FN + F8 is controlled by special tool developed for the feature FN keys.

  As much I know Toshiba offers no update for this older model laptop.
  Let's see if any other A350 owner has found a solution for this.

  I have A300 with Win7 on it, but I don't want to test with Win10 due to all possible issues I have with her.

• Lift and remove from the project window.

  I explore areas I've ever used in PP CS3.

  I understand how the lift and extract are SUPPOSED to work.

  What I saw, is that except if a clip is in some layer (which is highlighted), it is not lift or extract.

  In this case it is layer 4.

  Based on how I read this feature is supposed to work, I would image it would be extracted from any clip in the area of the elevator/check out.

  However, unless the clip is in layer 4 (in this) he do work. Move a clip to layer 4, he does.

  Should I put some strange preference?

  The screenshot below shows the only layer that gets extracted. You can see the area highlighted in blue in the picture below.

  Only a clip that crosses this layer will be lifted or extracted. Not the clip 2 layers.

  

  .. .and CS4 / CS5 is a determined yet more 'TRACK TARGET' workflow.

• Windows 7 64 bit... ""? "shows"See the whole map"in the network and sharing Center window"

  Hi guys

  I've been struggling with this problem for a few weeks and need help. When I open the control panel; Network and Internet; "Network and sharing Center", at the top of the page to the right, I have an option to view the connections of the network (see map). The opening I find a big blue '? ', with 2 solid lines from my computers to the "?", with the word "Unknown"under the present'?", then 2 solid lines go to the router... It's a wireless network must therefore a double line broken and not solid and obviously not '? I can fix this problem by changing the Properties tab 'Advanced' from the WiFi transceiver on each of the computers. Once I click OK, the computer the fact thing... and the blue "?" disappears and the network is 100% functional. Putting computers into sleep or restart... and I have the '? ' on the respective computer which itself was removed from the network after a reboot. This happens on 4 computers on the network, all the Windows 7 64-bit, 2 notebooks, desktop computer 2!... Still problem, all corrected in the same way. Until the '? ' is corrected I show other computers in our network at the bottom of the window under the label:-"the following peripheral discovered may not be placed in the plan.» Click here, etc. etc. Once all 4 computers are patched, I show a perfectly displayed network... I'm open to any ideas... Thank you

  The question mark appears when you return from sleep if interconnect them (Network Interface Controller) is allowed to turn off to save power.
  This can be disabled if you wish