Remove all applications, but not the settings
I would like to delete applications off iPad to my kids, but keep the settings. As a result of bad choices, they lost the use of the device for a month with the exception of a few applications of education. Because the device has more than 200 applications, I'm trying to understand if there is a relatively easy way to remove all applications (I can reload education ones), but all the settings I have for the device. I backed up the iPad and thought that I could restore all applications after their months of purgatory. Any ideas or suggestions on how to do it quickly?
No, there is not. Unless you're willing to wipe both parameters, applications will have to be deleted individually. However, with 200 apps, it could be easier to wipe and reintroduce the parameters.
Tags: iPad
Similar Questions
-
Update to iOS 9.3.2 resulted in a loss of symbol YouTube app but not the settings
upgrade to iOS 9.3.2 on iPad 3 has led to a loss of the symbols, but not in the settings page YouTube app. App Store says "run" on the YouTube app but no go. Cannot delete the parameters or the other.
$3delectiblefeline wrote:
App Store says "run" on the YouTube app but no go.
Really? I've never seen the App Store say 'run '. If the application is properly installed, the App Store would say 'open '.
Try resetting the iPad now buttons power and home together for 10 seconds until the Apple logo appears.
-
BlackBerry Smartphones Eception Exception: (all applications) does not. the process is completed.
Hello
I have a lot of problems with my bb, but normally correct them easily, by battery traction or software update, this time I can't do.
Some info on my phone if this can help.
Company: o2
Bold 9700 5.0 bundle 1022 (according to BB Desktop)
59402245 bytes free
Battery pull didn't work
Main applications I use are BBM Whatsapp Google Maps etc.
Basically, I'm trying to open an application and my phone freezes, I wait and get the untrapped exception error message. This happens with ALL applications, including surveys BBM, record Messages, clock, Facebook, phone. I tried a battery pull, he starts upp and the error messages come through quite the same problem is still there. I tried connecting to the office to try an update of the operating system, but I can't connect because it connects forever. so I can't do anything at all with my phone. It all started when whatsapp froze on me followed by a few other apps do the same thing, so I tried a battery pull.
Any help would be greatly appreciated! Thank you!
Hi aamirahmad
I suggest you make a backup of your BlackBerry smartphone and then reload the software as described in the article below:
Thank you
-
. Images PNG in the Mail application, but not the Photo app?
I was wondering if it was a bug or a limitation of the software. I myself have sent images properly displayed .png in the mail application. After clicking on "copy photos", the image did not appear in the downloads section of photo enforcement.
Its seems strange that the mail app can display png files, but the photo app can not.
You may not use png images for wallpapers because of this oversight even. Looks like a simple fix, obviously png display support is there, they just need to add other types of image files to funtions of the broswer photo file.
-
@HspNthMbr work in an application, but not the other
Hello
I want UDF @HspNthMbr, it was first recorded in a single application, so I copied into another application where I want to use.
I copy in environmental assessments, after the copy, write a very short script as below. When I hit the check button it throws below error msg. I tested this script in the original application, it worked fine. I also tried to register instead of copy, the result is the same. Can someone help please?
Error: 1200471 error analysis formula [statement of DIFFICULTY] (line 1): expression expected before [)]
/ *-Script-* /.
Fix (@Member (@HspNthMbr (@Name (@relative("YearTotal",0)), 1)))
"No account" = 1;
ENDFIX
-----
Update: I noticed in the ESSBASE newspaper, after that I have copy the function from one application to the other, he appeared to be Ok enter the 2nd application, what else must be done after copy and which could have other reasons?
Pls help and thanks in advance!
HSP functions considering specific custom functions, so if you use it on another planning application, then you will have to refresh custom functions from screen updating of database planning.
If you try to use it on an application for Essbase, I doubt that a copy is not going to work. (Not sure that you are allowed to copy these CDFs on Essbase application)
Concerning
Celvin Kattookaran
-
I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.
Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!
Hello
To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.
-
I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr
What... do not know any solution.Hello
Please try to post your query in communities:
General discussion of Photoshop
Kind regards
Sheena
-
Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud is it possible to LR5 LR6 to? Thank you very much.
Jeffrey
Yes, you can buy Lightroom without subscribing to Adobe Creative Cloud.
To purchase an upgrade to Lightroom 6 from a previous version, please see this link: products . Scroll to lightroom and click 'buy '. Then click on the selectable text next to "I want to:" and select "upgrade". In the drop-down list, select the version that you are upgrading. I hope that help.
Best regards
Guinot
-
How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?
This has two questions:
1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.
2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.
3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.
Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.
The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.
Then there is the BootCamp partition on the HARD drive partition #2.
Is there a way to get what I need?
That is what has been described in this notice of two canoes?
Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3
Thank you.
After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.
Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.
A. take backup
1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.
B. fuse out of the merger in two physical disks drive: SSD + HDD
1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)
Cs diskutil list
2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive. Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.
I hit this issue too. To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:
Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)
and repeat for disk1/dev/disk1 which is the HARD drive in my case).
This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.
2 create independent partitions (non-fusionend) for the installation of OSX.
Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".
3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".
C. install on the HARD disk as drive didier autonomous not fusion.
1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.
D. use BootCamp Yosemite f5 to install windows.
1. launch Yosemite bootcamp.
2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software. Do not click on the last box to install or remove windows pie creating real bootcamp partition again.
3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.
4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use. Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model). Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.
-From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.
-Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.
-Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.
5. open Boot Camp Assistant again and only select the third option, install Windows 7.
It will show you the screen to select what installation disk, select HARD drive.
Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.
For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.
Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio
6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.
7. once the installation is complete, check that windows is functioning correctly.
E. Si you want to upgrade to windows 10 Windows 7.
1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page. Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE. Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.
2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.
F. reinstall OSX El Capitan
Once your target windows system (if windows 7, windows 8 or windows 10) works very well. You can continue to create again your Fusion drive and reinstall OSX El Capitan.
1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.
6 type the 'diskutil list' command to list all disks and partitions.
The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.
The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.
G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc
1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.
Cs diskutil list
6. in the terminal, type commands to delete logical drives from basic storage. Note: All data will be destroyed in the logical drive.
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS GB SSD 121.0 disk0s2
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS 1.7 Untitled TB disk1s2
3: disk1s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database BOOTCAMP 503.0 GB disk1s4
5: Apple_HFS 801,4 Untitled GB disk1s5
8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.
diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5
Note: Mark the group id of logical volume shown in the results.
In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.
So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2
9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.
diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%
10 command "diskutil cs type list" to check the resulting fusion drive created.
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E
=========================================================
Name: LVG
Status: online
Dimensions: 1815635525632 B (1.8 to)
Free space: 90112 B (90.1 KB)
|
+-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E
| ----------------------------------------------------
| Index: 1
| Disc: disk1s2
| Status: online
| Dimensions: 1694646673408 B (1.7 to)
|
+--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10
---------------------------------------------------
Disc: disk2
Status: online
Size (Total): 1809780178944 B (1.8 to)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.
12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.
13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.
14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.
15. yet once please take personal responsibility on damage if you follow the instructions in this article.
-
Hi all
I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.
I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.
How to create a master control of a button where the look apply to everyone else but not the Boolean text?
Steve Chandler wrote:
I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.
As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.
Alternatively, remove Boolean text and replace with legend
-
Windows Media Center plays soundtrac film but not the video.
My Windows XP Media Center plays the soundtrac of movies but not the video.
The display shows the similar factals when music is played.
Latest WMC has been installed
Any ideas?
Hello
1. do you know the file type you are trying to play?
2. this happens with all DVDs you play?
3. do you get an error message?
Step 1: Try to update the codecs to check if the problem persists. See the below mentioned the Windows Help article.
Codecs: Frequently asked questions
Step 2: Check if you have the latest video drivers installed on the computer. You can log on to the computer for the same manufacturer site. Also, check the latest Windows updates. Check if all related drivers are available in the optional updates.
Step 3: Adjust graphics hardware acceleration. To do this, follow these steps:
a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
b. click on advanced settings.
c. click the Troubleshooting tab, and then click on change settings.
d. move the hardware acceleration slider two notches to the left of Full (the Disable cursor and bitmap accelerations setting).
e. click OK, and then click Restart now.
I hope this helps!
-
Original title: connection problem
I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.
The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.
Hello
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.
I would be grateful if you could help me with more information:
1. Since when you are facing this problem?
2. What is the exact error you receive by accessing the computer?
I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:
Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
For more information, you can consult the Microsoft article.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
HP Photosmart 6510 series connects to the network and Internet, but not the computer.
Hey all,.
I have a desktop H8-1228 and 6510 e - printer. I got both products at the same time. I did the initial installation, and everything worked perfectly. I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.). Recently, I made a trip for two weeks. I turned off the printer. This seems to have been a mistake. Now, he will only contact my network and Internet, but not the computer. The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer. I did this many times by printing the HP's Configuration Page from the printer screen. I also used Windows "Add a printer" without success.
I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel. A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation. There can be no. :-( I did the installation with the same problems that I had all the other times that I tried to install it.
No help from you the printer experts will be greatly appreciated. I'm not a novice as you can see. This situation, however, launched my posterior. :-))
Hi old_geekster,
You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.
HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
I would like to know what are the errors you receive?
-
My Nano Gen 7 is recognized on a single computer, but not the other
My Nano Gen 7 is recognized on a single computer, but not the other. I went through all the troubleshooting tips. Different cables, try all USB ports, uninstall/reinstall itunes, etc. I have itunes more up-to-date software. I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod. Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer. Nothing has worked. I think there must be a setting on my pc. I use the latest version of windows 10. Any suggestions are welcome. Thank you
I just bought an Ipod Nano 7th generation and itunes does not recognize it. Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck. My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device. I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.
-
I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?
I was under the impression that the messages sent between iPhones are free?
It's a little more complicated than that.
If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.
For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).
Maybe you are looking for
-
All my text replacements are lost (except on my way!) after the upgrade to iOS 10 on my iPhone 5SE. IS this a bug?
-
Laptop HP 2000: HP 2000 - "no audio output device is installed".
Install my windows 10 recently crashed. The restore point was inable roll back and I had to reset the PC. Once the reinstallation is complete, I have no sound. Device Manager says: This device is not configured correctly. (Code 1) A device attached t
-
How can I delete the backups on my Macintosh HD?
All of a sudden, I have a huge part of my hard drive space, showing that the backups. It corresponds to the size of the backups on my external My Passport. I don't know how it happened, unless a backup ran when I had my passport unplugged. How I rem
-
MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?
Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get
-
Hello I have compaq presario CQ60-212ea with a processor AMD Sempron, TR-42, HOUSING model: s1 (s1g2). http://products.AMD.com/en-us/NotebookCPUDetail.aspx?ID=469&F1=&F2=&F3=&F4=&F5=S1&F6=&F7=&F8=&F9= To breathe new life into the old laptop, I think