Remove diskgroup failure of vSAN got out '' Operation timed. ''

Similar Questions

• How to remove image files i've got duplicates when it says I can't do it because the file is open in another program? What does that mean?

  How to remove image files i've got duplicates when it says I can't do that because the folder is open in another program? What does that mean?

  Hello

  • What version of Windows are you using?
  • What were the changes made before the problem occurred?
  
  Follow the steps in this given link and check if that helps.

  Method 1: check out the link below and follow the steps

  Access the link for more information about the error you receive below:

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-delete-a-file-or-folder

  Method 2: you can also try to remove the file getting mode without failure.

  Access the link below to learn more about Safe Mode:

  Start your computer in Mode safe:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Method 3:
  Once you face this problem you can check in Manager tasks if there is an executed program attached to it.

  a. right-click on the taskbar and click Task Manager.
  b. in the Windows Task Manager window, go to 'Process' and check if there is no program associated with those files.

  
   

• 'Operation Timed Out' when cloning a VM

  Hello

  I'm trying to clone a virtual machine through virtual Center and I get the following error after only a few seconds.

  Impossible to duplicate * NAME * server has expired.

  ESXI 4.1.

  VSphere Server 4.1.0

  I am cloning to the same host

  Cloning of virtual computer works fine.

  Would really appriecate any help/troubleshooting advice, not even sure what log file for check but below is a part of the file server VCentre {vpxd-974 Journal} log log if it helps.

  Thank you

  2012-03-16 20:04:44.574 08068 verbose 'App'] [VpxdTaskInfoPublisher] processing object update 0 filter 0

  [16-03-2012 20:04:44.574 08068 verbose "App"] [VpxdTaskInfoPublisher] update for prop info.completeTime

  [16-03-2012 20:04:44.574 08068 verbose "App"] [VpxdTaskInfoPublisher] UpdateTaskInfo for channel task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [TaskInfoChannel::NotifyWaiters] Notified for _infoVersion: 4; task: task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [TaskInfoChannel::SetDisconnected] task: task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [TaskInfoPublisher::RemoveChannel] Channel (task-25392) removed for task: task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [VpxdTaskInfoPublisher] Disconnected

  [16-03-2012 20:04:44.574 08384 verbose "App"] TaskInfoChannel destroyed for task-25392

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.574] [clone] (SERVER1) Unexpected exception (vim.fault.Timedout) over clone. Abandonment.

  [16-03-2012 08700 WARNING opID "App" = 07130DD4-000004DF 20:04:44.583] [JrnlFilePersistenceProvider] Got EOF when reading file

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.598] [JrnlFilePersistenceProvider::DeleteJournal] Removal of C:\ProgramData\VMware\VMware VirtualCenter\journal\1331928251.240.

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.598] [VpxdVmprovXaction] From the log restore

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.598] [VpxdVmprovXAction] UndoCreateSnapshot... vm: vim. VirtualMachine:vm - 345, name of the snapshot: clone-temp-1331928251840724

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.599] [VpxdVmprovXAction] UndoCreateSnapshot failedto find the snapshot that he was supposed to remove

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [VpxdVmprovXaction] An std (vmodl.fault.SystemError) exception in treatment entered paper (op = 7), the entry is ignored

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.599] [VpxdVmprovXaction] Made available VM transaction cancellation

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [vm.clone] Unexpected exception when cloning a vm: /vpx/vm/#345 /.

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [VpxdResMgr] Unreserving

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [VpxdResMgr] RESV Spec:

  (host - 361:3, 1)

  (host - 361:8, 0)

  (host - 366:3, 1)

  (host - 366:8, 0)

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.599] [VpxdVmprov] Clone failed: vim.fault.Timedout

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.599] vim.fault.Timedout

  -End of newspapers in memory-

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.603] [VpxLRO] - FINISH special 47187 - vm-345 - vim. VirtualMachine.clone--481DABDF-D6BC-4F17-B43A-80AB476FB60D(84215248-DBF9-4769-ABB6-59796EA66029)

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.603] [VpxLRO] - ERROR task-47187 - vm-345 - vim. VirtualMachine.clone: vim.fault.Timedout:

  Result:

  {(vim.fault.Timedout)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  MSG = 'Operation timed.' out,

  }

  Args:

  The ARG file:

  ' vim. record: Group-v447'

  The ARG name:

  "New Virtual Machine.

  ARG spec:

  {(vim.vm.CloneSpec)

  dynamicType = < unset >

  location = {(vim.vm.RelocateSpec)

  dynamicType = < unset >

  data store = ' vim. Datastore:datastore - 168',

  diskMoveType = < unset >

  pool = ' vim. ResourcePool:resgroup - 87',

  Host = < unset >

  transform = < unset >

  },

  model = false,

  config = null (vim.vm.ConfigSpec),

  customization = null (vim.vm.customization.Specification),

  powerOn = false,

  snapshot = < unset >,

  }

  Hi kilicool,

  Welcome to the community.

  Have you tried to reboot the VC Server? If Yes

  In turn, before adding the host ESX VCS try to restart the management

  The agent that is running on ESX.

  CLI: service mgmt-vmware restart

  If this does not work I would say adding VC to the host, but I think that the

  above command will help you because it's just VCS

  "Affirmation without discipline is the beginning of delirium."

• 'Operation timed out', while protecting a virtual machine

  When you try to configure protection on a virtual machine in 4.1 SRM and every time I do it fails with the error 'Operation timed out' and I see the following error message in the log of Site Recovery Manager:

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" ASSIGN RecordOp: info.error, com.vmware.vcDr.ReplicationGroup.AddVmTask - 153

  2010-09-21 14:07:29.502 04584 'com.vmware.vcDr.ReplicationGroup.AddVmTask - Task' verbose Error value {(vim.fault.Timedout)

  dynamicType = & lt; unset & gt;

  faultCause = (vmodl. NULL in MethodFault),

  MSG = ""

  }

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" ASSIGN RecordOp: info.completeTime, com.vmware.vcDr.ReplicationGroup.AddVmTask - 153

  2010-09-21 14:07:29.502 04584 info 'com.vmware.vcDr.ReplicationGroup.AddVmTask - Task' State of the error value

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" ASSIGN RecordOp: info.state, com.vmware.vcDr.ReplicationGroup.AddVmTask - 153

  2010-09-21 14:07:29.502 04584 verbose "PropertyProvider" RecordOp REMOVE: addVmsTaskList, group-4425'

  Someone at - it no indication on what this alarm tells me and how to fix?

  Thank you.

  V.

  I saw this problem after repairing the installation of SRM. Restart both servers SRM has solved the problem.

  In your case, this is the new installation or did you 'fix' recently?

• Game get unresponsive, a communication error has occurred: Operation Timed out

  A communication error has occurred: "Operation timed out".

  The Web server may be down, too busy or other problems preventing him from answering. You can try again at a later date.

  For assistance, contact your network support team. That's what I get when I try to access a game I play. Worked fine when I stopped last night, but all day was like that, everything is fine.

  Hello

  ·          Game in which you try to read?

  ·          You play this game online?

  I would say also, please contact game support to check their end technical issues.

• Get error 118 (net::ERR_CONNECTION_TIMED_OUT): the operation timed out when opening applications on Facebook

  I need help for my this error error 118 (net::ERR_CONNECTION_TIMED_OUT): the operation timed out

  It's my app from facebook

  Hi Muhammadarif,

  1. the problem occurs only in facebook?
  2. what web browser do you use?

  This is a known error in Google chrome. If you are using Google chrome then I suggest you post in the forums of Google chrome.
  http://productforums.Google.com/d/Forum/chrome

  If the problem only occurs in facebook, then I suggest you to contact facebook support.
  http://www.Facebook.com/help/

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• vSphere high availability 'Élection' fails at 99% 'operation timed out' to 1 of the 2 hosts

  Hello

  We had a system with 1 host ESXi 5.1 with local disks.

  Now, we install redundancy by adding a 5.5 U2 ESXi host and a device of vCenter 5.5.

  After having installed and any addition to vcenter, we went the ESXi 5.1 to 5.5 U2 ESXi. The SAN works correctly (vMotion works on the own NETWORK card).

  Now, if I try to activate the high availability, both servers will install the HA Agent and start "Election".

  All the warehouses of data (4) on the SAN are chosen for the HA heartbeat, response of isolation is "keep it turned on" by default.

  A server will always be this process done, and the other will keep "elect" until it reaches 100% and errors on the operation "election timed out.

  I've seen this problem on both servers, so I think that the 'master' elected does not have the problem, only the "slave".

  I have checked these items and executed, but not worked:

  VMware KB: Reconfiguration HA (FDM) on a cluster fails with the error: operation timed out

  -The services were running

  VMware KB: Configuration HA in VMware vCenter Server 5.x does not work, error: Operation Timed out

  -All the MTU has been set at 1500

  VMware KB: VMware High Availability Configuration fails with the error: unable to complete the configuration of the ag of HA...

  -the default gateway is not the same on the two hosts, but I fixed that. There is no itinerary changes. HA the setting is "leave power." After correction and deactivation/reactivation HA, the problem is always the same.

  VMware KB: Check and reinstall the correct version of the VMware vCenter Server agents

  -J' ran "Reinstall ESX host management agents and HA on ESXi" agent of HA, and I checked that it was uninstalled and reinstalled during the reactivation of HA.

  CP /opt/vmware/uninstallers/VMware-fdm-uninstall.sh/tmp
  chmod + x /tmp/VMware-fdm-uninstall.sh
  /tmp/vmware-FDM-uninstall.sh

  I did this for two guests. This fix makes the problem of the election and I was still able to run a HA test successfully, but when after this test, I turned off the 2nd Server (in order to test the PA in the other direction), HA has no failover to 1 and everything remained low. After pressing 'reconfigure HA', the problem of the election appeared again on 1 hosts.

  Here are a few extractions of newspapers:

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:01:26 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03:02 192.27.224.139

  -Message "host vSphere HA State" on 192.27.224.139 changes from green to red info 29/11/2014 22:02:58 192.27.224.139

  officer of HA - vSphere for this host has an error: vSphere HA agent may not be properly installed or configured WARNING 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became info error of initialization of 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:00:52 192.27.224.139

  -DSMD3400DG2VD2 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -DSMD3400DG2VD1 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -Firewall configuration has changed. 'Enable' to rule the fdm value successful.  29/11/2014 info 22:00:45 192.27.224.139

  -L' availability vSphere HA of that host State became not initialized info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root host

  -vSphere HA agent on this host is disabled info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root

  -Reconfigure HA vSphere host 192.27.224.139 operation has timed out.     root of HOSTSERVER01 29/11/2014 22:00:31 29/11/2014 22:00:31 29/11/2014 22:02:51

  -Configuration of vSphere HA 192.27.224.139 operation has timed out.     System HOSTSERVER01 29/11/2014 21:56:42 29/11/2014 21:56:42 29/11/2014 21:58:55

  Can someone give me please with help here?

  Or the extra things that I can check or provide?

  I'm currenty running options.

  Best regards

  Joris

  P.S. I had problems with cold Migration during the implementation of the SAN. After setting up all (vMotion, ESX upgrade), these problems have disappeared.

  When you search for this error, I came to this article: KB VMware: VMware vCenter Server displays the error message: unable to connect to the host

  And this cause could make sense, since the server vCenter changed and IP addressing has been changed during the implementation.

  However, in the file vpxa.cfg, the < hostip > and < serverip > is correct (verified by using https://< hostip > / home).

  Tried this again today, no problem at all.
  

  P.P.S. I have set up several of these systems from scratch in the past without problem (if it is an 'upgrade').

  OK, so the problem is solved.

  I contacted Dell Pro Support (OEM offering the license) and they checked the logs (fdm.log) and found that the default IP gateway could not be reached.

  The default gateway is the ip address by default host isolation, used by HA.

  Because it is an isolated production system, the front door provided proved only for future purposes.

  Now, I've changed the default gateway address of management on the switch plugged into both hosts, namely the ping requests.

  This solved any problem.

• I need help to remove Adobe Acrobat. I got the free trial version, and it has expired. I thought I deleted the program, but I get this message "before you proceed you must first launch Adobe Acrobat and accept the end user license agreement."

  I need help to remove Adobe Acrobat. I got the free trial version, and it has expired. I thought I deleted the program, but I get this message "before you proceed you must first launch Adobe Acrobat and accept the end user license agreement." I thought I deleted the program, so I can't seem to be able to throw. I have a MacBook Pro OS x help, please.

  This message comes from Adobe Reader; Launch the Reader application and accept the EULA.

• Operation Timed out - vSphere API

  Hello

  This follows the validation of my colleague Tony Gent on Snap Mount LUNs will.

  I've coded successfully a routine to call queryunresolvedVmfsvolumes in a few test environments and to manipulate the result for the host will, but critical on-site routine returns with a message 'operation timed' out after 100 seconds.  I tried the navigation to the CROWD and call the method and does not return the expected results but takes a little less than 4 minutes.  I don't see the value of operating time is configurable anywhere and the method has no parameters and is not the task.  I looked at the box VC that I sign too and also the host I use the method on.

  Does anyone know if the value of timeout is configurable (I think I'm screwed, if it isn't!)

  see you soon

  MikeL

  The problem is that cmdlet Get-View creates a new instance of VimService as parameter values of Id are not owned by the customer.

  But if you change $view_object. Property of Client.VimService.Timeout and immediately after that call the $view_object method, that works too long, it should work.

  That is to say:

  ...
  $hostview = Get-VMHost myHost | Get-View
  $dsmanager = Get-View $hostview.ConfigManager.DatastoreSystem
  
  $dsmanager.Client.VimService.Timeout = -1  # Infinite timeout
  $dsmanager.QueryUnresolvedVmfsVolumes()
  

  / Yasen

• Host does not switch into maintenance - Operation Timed Out mode

  Hey all.

  I'm putting one of my hosts in the mode of maintenance and get an 'Operation Timed' error Out. All virtual machines have been moved outside the host so I know that's not a problem "CD in the drive.

  I tried to do this in VC and the command line using vimsh - n EI/hostsvc/maintenance_mode_enter

  When I run the command line, here is the result:

  # vimsh-e - n/hostsvc/maintenance_mode_enter

  File not found.

  -2008-12-13 16:16:35.872 'App' 3076444288 info] current working directory: / usr/lib/vmware/hostd

  -2008-12-13 16:16:35.874 'BaseLibs' 3076444288 info] HOSTINFO: see Intel CPU, numCoresPerCPU 4, numThreadsPerCore 1.

  -2008-12-13 16:16:35.875 'BaseLibs' 3076444288 info] HOSTINFO: hyperthreading disabled, setting the number of threads by heart at 1.

  -2008-12-13 16:16:35.876 'BaseLibs' 3076444288 info] HOSTINFO: this machine has 2 physical processors and 8 cores total 8 logical processors.

  -2008-12-13 16:16:35.877 'BaseLibs' 3076444288 info] use system libcrypto, version 90709F

  -2008-12-13 16:16:35.878 info 'App' 3076444288] Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  [- 2008-12-13 16:16:35.905 'BaseLibs' 13552560 attention] - Vmdb_Unset] unknown path: /vmomi/

  ' vim. task: haTask-ha-host - vim.HostSystem.enterMaintenanceMode - 198307'

  Something tells me that the "file not found" is not a good thing. If you can think of to try please let me know.

  TIA

  Post edited by: kac2

  I changed the first [to one - for purposes of formatting

  Unfortunately, this happens from time to time.  The work around is simply restart the host as it is, and then maintenance.

• Catastrophic failure Ox8000FFFF and running out of disk space on FACTORY_IMAGE (d :))

  Whenever I save my files to a disc, it is said that he has been completed successfully, and then later, I get a message that says Ox8000FFFF of catastrophic failure and I am running out of disk space on FACTORY_IMAGE (:)) IM Windows Vista. I'm not a novice in computers, I am a computer expert. When I pull my FACTORY_IMAGE folder, I don't know what are the files, so I'm aftaid of monkey with them. I deleted the old and useless files, but whenever I run the backup, I get the message of Ox8000FFFF of catastrophic failure later. I can only assume that the backup and running out of disk space on FACTORY_IMAGE are related. I've seen corrections on the Net for this problem, but I'm afraid to try them. Any help would be appreciated.

  Hello

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  Should be backups on an external hard drive or DVD; external hard drive preference.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

  EDIT:

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

• Hi, I'm clueless... totally computer Robyn. I think "siteranker" is my problem. I can't remove. Are there really people out there kind enough to help? Thanking you in advance, Robyn

  I promise to do what it says, but I just put it out there again... I am completely distraught computer.

  I don't know yet how to tell you what I'm running... or of course what that means...
  THANKS TO EVERYONE WHO HAS THE CŒUR ENOUGH TO HELP ME!

  Hello

  you click Start - then right-click on computer - then left click on properties to know what operating system you have running on your computer

  It's advice from this manufacturer to remove it for XP

  in Vista, it is very similar; programs of the control panel and uninstall the program

  http://www.SiteRanker.com/FAQ.aspx?ID=3012

  If he is stubborn and won't uninstall download the FREE of Revouninstaller version from the link below and use that to remove it

  Choose the FREE version to download here

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• Remove diskgroup raw disk?

  Hi all.
  
  I installed of ASM (10.2.0.3) with attached databases.
  
  For the DATA diskgroup, I have 16 9 GB of raw disk files. There are more than 60 GB of free disk. I would like to give back it to the AIX admin guy. ASM used about 6G 9 g on each disc. How to make it so that there is nothing on the disk I want to remove from the diskgroup or I can just remove that via OEM and reorganize it?
  
  TIA,
  Greg

  If they are part of a disk group, you will have several disks

  Find the disk you group and save the number of disk group

  SQL > select group_number, name from v$ asm_diskgroup;

  GROUP_NUMBER NAME
  ------------ ------------------------------
  1 P1CSM2_ASM_DG1

  SQL >

  For the disk group is the disk that you want to remove the group.

  SQL > select v$ asm_disk, disk_number, mode_status, name, path where group_number = 1 order by disk_number, name;

  DISK_NUMBER MODE_ST NAME
  ----------- ------- ------------------------------
  PATH
  -----------------------------------------------------------
  0 P1CSM2_ASM_DG1_0000 ONLINE
  / dev/rhdisk2

  1 P1CSM2_ASM_DG1_0001 ONLINE
  / dev/rhdisk3

  2 P1CSM2_ASM_DG1_0002 ONLINE
  / dev/rhdisk4

  3 P1CSM2_ASM_DG1_0010 ONLINE
  / dev/rrawlv01

  4 P1CSM2_ASM_DG1_0011 ONLINE
  / dev/rrawlv02

  5 P1CSM2_ASM_DG1_0012 ONLINE
  / dev/rrawlv03

  6 selected lines.

  SQL >

  determine the disk that you want to remove

  SQL > ALTER DISKGROUP P1CSM2_ASM_DG1 DROP DISK P1CSM2_ASM_DG1_0000;

  Modified DiskGroup.

  Check operation of the DSO that will remove anything from this disc.

  SQL > select * from v$ asm_operation;

  GROUP_NUMBER OPERA STAT REAL SOFAR EST_WORK EST_RATE POWER
  ------------ ----- ---- ---------- ---------- ---------- ---------- ----------
  EST_MINUTES
  -----------
  1. RUN 1 1 548 2884 1588 REBAL
  1

  Once the operation is complete, then the raw device can be recovered

  SQL > select * from v$ asm_operation;

  no selected line

  Published by: mrmessin on May 27, 2009 12:23

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• The urge to Ultrabook 6 problem with recovery after failure of hard drive (out of warranty)

  Hello

  Please can someone tell me if it is true that to use HP factory recovery disks, hardware must be exactly the same as when purchased.

  After hours wasted trying to get the recovery disks to work, I find myself with the same "failed to retrieve @ screen and some unnecessary lines of code."

  In reading the various posts, it seems that I have a replacement for HP HARD drive of the same type that came with the computer. If this is the case, then the links on the support pages should say this before I have pay £39 for a set of disks.

  For me, a hard drive is a hard drive. I replaced a drive fried (1 month out of warranty expires) with a good brand replacement, but larger. Disks won't load.

  However, I could load W7 form an iso file and get that to work. I need the recovery because I do not know how to configure raid which allows the QuickStart on this laptop, and I don't have the time or no further inclination to make it work.

  Partly a rant, sorry, but I'm wrong, and is there a solution?

  Concerning

  I have seen others with this problem. Unfortunately, the only working solution, I remember the top was where a guy removed the player cache Msata, ran recovery then reinstalled.

  On a single charge of Win 7 I think you could install the Intel Quick Start software, then use it to activate the quick start. I have more a laptop Win 7 with Msata to test, but I remember the software could be opened from the icon beside the system clock and used to toggle the quick start.