Remove the dust under the glass of Photosmart C6180

Similar Questions

• Cannot install the driver HP Photosmart C6180 and software problems-, yet get HP-related crashes

  I had a lot of crashes with my main PC, a number related to HP, including at startup ("your computer has recovered from a serious problem") and close (the HP software responds only to not close).  I reformatted the system, reloaded Win XP Pro disk and all updates.  I couldn't reinstall the HP drivers and other software from my CD or after you download from the HP site.  The stalls of process at an early stage (only in step 2), sometimes blocks your PC when it does.

  The last time, I filled the experience HP online questionnaire and noted that I thought I had a generic problem rather than related to HP.  However, checking details on the Microsoft error report, I discovered that after the start I regularly get the message:

  HP Installer Recovery plug has encountered a problem and needs to close

  Error signature

  AppName: hpzrcv01.exe AppVer: 7.0.0.71 ModName: msvcrt.dll

  ModVer: 7.0.2600.5512 Offset: 00036fa3

  Download of HP is about 76 Mb.  I have on my C drive (System) of a program file HP/Temp with 7 Mb and on the E partition where I wanted to install the drivers and other software a program file HP / Digital Imaging, 30 MB.  Both are dated yesterday, when I finally tried to install from a download.  The HP printer is not displayed under the control panel of configuration/printers, or the Add Printer Wizard can recognize it on the network.  (I have not tried to disconnect the router and connect directly to the PC, but that shouldn't matter to software problems, should it?)

  Any advice would be welcome.

  Thank you once again, Dexter - it was a Microsoft problem rather than a problem of HP, I finally found and installed the right fix MS and just installed the HP software - to be on the safe side, I only did the essentials of basic printing and left the other stuff for later.  And I'll report this "resolved" if I can find the button after validation!

• The dust under the glass

  Hello world!

  the has found several pieces of dust under my glass of ion - x in the lower left corner. Nobody knows: our limited warranty covers this issue? someone face thing? It's ok, or his problem with adhensive, which keeps the front glass?

  

  Hello

  If you can see the dust under the glass of the watch face, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch repaired under warranty:

  https://www.Apple.com/support/watch/contact/

• I started looking to remove the glare of lenses

  I know very little about the photo editing and all I really wanted to do was to find a way, without having to spend too much time, to remove the glasses from family members in a favorite picture of glare.  I'm not interested, so that in learning about all the features or get deeply involved in photo editing, I just want this thing at the moment, so I downloaded the free trial offered to Adobe Lightroom.

  Now, it seems too complicated for a complete novice like me, and I beat my goal.  Unless... can someone just tell me an easy way to remove the shine of his glasses for my mother's eyes can be seen.  She is getting very old and we have very few photos of her and it would be nice to have a good idea for a souvenir.

  So my question: is there an easy way to remove a glasses of people, the glare without destroying the image, so that their eyes are visible? If this isn't the case, you can have your download back, because I just don't use it.

  all I really wanted to do was to find a way, without having to spend too much time, to remove the glasses from family members in a favorite picture of glare.

  Lightroom is not a good tool for doing this, especially if you do not want to spend too much time. It's not because Lightroom is "far too complicated for a total novice", this is because the tools simply do not exist in Lightroom. Even the specialists it would be difficult, if not impossible, to do.

  Photoshop can be a better choice. But even in Photoshop, I think that a beginner would struggle this doing.

• PhotoSmart C6180: page c6100 is broken

  I am trying to download a driver for my printer C6180, but all roads lead to this page:

  http://support.HP.com/us-en/product/HP-Photosmart-C6100-all-in-one-printer-series/1153695/model/1153...

  This page is empty.  Is there another page?

  Hi @eTTguy,

  Welcome to the HP Support forums.

  I understand that you try to download the drivers for a HP Photosmart C6180 all-in-One Printer for Windows 10 but cannot because the tracking link opens a blank page. I want to help you with that.

  I am currently on a Windows 7 PC using Internet Explorer and Google Chrome, and the link you posted took me to the support home page for the HP Photosmart C6180 where you would still need to click on "Software & drivers" and the blue "go" button under "Option 2" to get the drivers HP Photosmart C6180.

  If you follow this link, so that it brings you directly to the page software and drivers with a red download button click on start download - drivers and software HP Photosmart full feature.

  This link should work. If she opens another blank page, try a different web browser. Web browsers Act sometimes differently with different websites.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• My Photosmart 2610xi has a white film stained under the glass that distorts the copies and scans.

  There is a white film under the glass that appears on copies and scans.  I would like to know how to remove it and clean the underside of the glass.

  Can someone tell me how to do this?

  Hello

  Click HERE for a document that could help.

• Remove the cover of my MacBook Pro, I saw a black residue under places of my Fans. What is it?

  I just removed the cover of my 17 "mid 2010 MacBook Pro to replace the hard drive!  I see that black dust has settled under the two locations of cooling fans, on the cover.

  It seems to be a micro-fine DUST, color dark Siver.

  1. Is it debri met fans?
  2. Can I use a Microfiber cloth to remove safely? and
  3. How it is there?

  Please check, as I don't know if it's to worry about.

  Is it debri met fans?

  Yes

  Can I use a Microfiber cloth to remove safely?

  For text detailed and video instructions on how to clean the fans, visit You Tube and iFixit tutorial.

  • How it is there?

    Dirt can also get inside a computer because it has vents.  Fans can also attract the dust bunnies inside the computer where most settle on fans.  To answer your question - air and the environment around your computer.

  

• BlackBerry Passport passport (AT & T version) - the dust under the front facing camera

  I've had my Passport AT & T for a little over a month now and absolutely loved.  However, my front facing camera has a considerable amount of dust under the glass.

  Is it possible that I can clean myself?

  If this is not the case, what should I do?

  Thank you

  Tyler

  Contact AT & T for warranty replacement.

• iPhone 7 dust under the screen

  Hello everyone I see a dead pixel or dust under my iphone 7 jet black 128 GB should I go to apple?

  If there is dust under the screen, it's a hardware fault.  Bring the phone to Apple for the Exchange.

  Best,

  GDG

• Unbelievable, dust under the screen of the iPhone 7

  Good night everyone.

  I've posted a few times before here in discussions about the dust under the screen of the iPhone 6 s, which mine was when I bought it, when they changed my screen 9 times and when they exanged to renovated ones and even an Envoy to Ireland brand new with new warranty at all.

  Last Friday I went and waited all night to buy an iPhone 7 hoping being dust-tight its screen would be perfect, and as I got it, I saw something under the protection of screen thinking it was something that got stuck all by placing, but today, I deleted and found which can be seen in the attached picture (he can be seen in the crossbar left angle)

  Is it not possible to exchange it for another iPhone during the day 14 guarantee now that West no stock?

  Thank you very much

  1st world problems are something to see indeed!

• How to remove the dust in the touchpad on the Satellite U920T

  I have a U920T, using only the touchpad, combined with the touch screen.
  But the touchpad got the block, with little dust inside.

  This is quite annoying on a daily use.
  I couldn't clean with a vacuum cleaner or by blowing air with a bicycle pump.

  Does anyone know a way to remove the dust in the touchpad?

  Thank you
  LT

  I use adhesive tape to remove dust between the touchpad and touchpad buttons.

• The dust under the screen of the Qosmio X 500

  Hello

  I purchased a Qosmio X 500 to Saudi Arabia in April last year and Ive brought to the India where I currently reside. Last week when cleaning out my screen randomly, I noticed a few specks of dust in (lcd/led panel below). This does not preclude my intervention on the machine, or are facing other problems of performance. but the presence of these particles of dust under the screen gorgeous 18 '' becomes a horror.

  I hardly take the laptop outside or use in difficult or dusty environments. I have a guarantee of the EMEA which is valid until April 2015 and I intended to ship the laptop in Saudi Arabia to rectify. Any suggestions on this subject would be greatly appreciated.

  Thank you and best regards

  Dr. Abdel Ansari

  Hello

  In my opinion, you make the right choice. Laptop has guaranteed EMEA for Toshiba in Saudi Arabia service provider will help you in this. Of course, laptop must be disassembled and cleaned.

  Good luck and I hope everything will be OK.

• Photosmart 8230. How to remove the printheads to clean?

  Hi guys, I have a Photosmart 8230. After a few lines of print that black ink fades to almost nothing, all the colors are perfect. There is no error message. I did self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I have remove the printhead and immerse it in hot water as a last resort. The question is, how do I remove the print head? or should I use it as a sea anchor!

  I just did this to a HP Photosmart 8250, which is in the range of 8000 series. I guess they are similar. I was a repair man and many other tings have done in my life, I decided to take a shot at fix my 8250 rather than junk food it. 3 years it was great, the jam only paper and quickly great photos, so I didn't give up on this. HP will not repair printers for us, I think because it's too much hard work, and they can sell one for what it would cost.

  In fact, I have fixed my HP 8250 Photostat. His work, but color printing is not as good as he was, yet, but I hope that will improve all the colored inks to work their way through the system.

• Cannot copy from the surface of the glass. HP Photosmart Premium Fax all-in-One, model # C410a

  Hi people,

  I can't make a copy of the surface of the glass of the printer. Automatic advance works great, time to take the paper and print a copy. In the past, printing from glass was not a problem. The error message on the printer says "Document Feeder Jam. Reload document, then restart of work. " The problem is that there not be jammed. I raised the lid of the printer and checked the ink cartridges, checked the paper tray and open the access to the rear of the printer.  I have an HP Photosmart Premium Fax all-in-One, model # C410a. All accepted ideas. Right now, I'm ready to start with a hammer.

  Oops, I got typo in my link.  I have the fix above or you can click here.

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.