Repetition of first Audio Pro with Dynamic Link

Similar Questions

• AE freeze for a while during the passage of Premiere Pro using dynamic linking

  Hello

  I use Premiere Pro with dynamic links to AE constantly. In this particular computer I had it for 3 months without any problem. A few days ago began almost every time I change first Pro AE (CMD + Tab), a little bit at the beginning and now, a LOT of freezing. It takes several minutes for AE start working again.

  Looking at activity monitor the % CPU for AE when this happens is over 100 and often red (not admissible). Time range from 10 seconds to several minutes. I work with this constantly so I have to be able to move quickly from one to the other.

  Some details of what I am working with:

  OS X Yosemite 10.10.3

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz Intel Core i7 processor

  32 GB 1600 MHz DDR3 memory

  Graphics AMD Radeon R9 M295X 4096 MB

  First Pro CC 2014.2 Version 8.2.0 Build (65)

  After effects CC 2014.2 Version 13.2.0.49

  I tried to uninstall and re-installation of AE, Premiere Pro and Media Encoder (in desperation) and the recommendations of Adobe support I run repair permission to drive on the boot drive, as well as through all the permissions in disk for all the Adobe folders and subfolders... No use, it keeps freezing like I use it. Memory RAM remains a good 20-25 GB when this happens. I'm running out of options.
  

  
  

  Any ideas what could be the cause and what I could try to fix it?

  
  

  Very appreciated
  

  I found the problem. HAVE nothing to do with the files, but with the huge amount of compositions that are related to the time wherever I have reach about 30 or so it starts to slow down.

  Solution, keep the compositions related to various projects of the AE. Works like magic again. Thanks for the help anyway!

  Enrique

• At CS6 fixed the body with dynamic links AE slow render problems?

  I've got body with dynamic links AE slow render problems similar to those described in this thread:

  http://forums.Adobe.com/thread/904652?start=0 & tstart = 0

  As I understand (and I could well be wrong), if I made a project for which AE projects linked dynamically in (something simple lower thirds of the color adjustment), when rendering AE bits run as a service, which limits the EI bits single processor and actually stops made simultaneous multiple images. That's why I can get very high makes times (essentially no parallel processing), and why play with the number of units allowed for simultaneous frame rendering, or the amount of RAM said that processors can access, did little or no effect on the total render time.

  Supposedly some AE point would be changed as it has used Media Encoder to make it is made (even as Agency), thereby speeding up rendering for any project of which parties linked dynamically in AE.

  We did it in CS6? If not, any idea when that is scheduled to occur?

  It turns out that it is a 'feature '. A kind gent on the AE forum has pointed out to me a document that I have already read many times trying to understand that and has fact me understand it finally:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS92A6319B-B1EB-4b49-A09A-9FFE83E6CD37.h tml

  And it's right there in print at the bottom: "Note: a linked After Effects composition will not support made simultaneous multiple images of multiprocessing"underlining.»

  So the answer to my question is no. Adobe that has not yet set. I really hope they do well. This is a killer of serious performance at the time of export. Large enough to allow a use AE for everything that affects all images (such as color grading, or denoising) completely useless to me. Sigh...

  And Yes, I did a feature on that request.

• Audio problem when exporting effects with dynamic link first.

  Hello, when I export a project in which I have a sequence of first (dynamic links) in document exported sequelae, gives equal format (h264, quick time...) when to finish the soundtrack and the video of closing at the last second make me a second audio as repeated in the final, but it is nor in the proposed establishment or the after , also I tried to export the audio (exported since the first) on the separate track and the link dinamic without audio (mute), but nothing new... everyone knows it can happen? Thank you very much. Attached example... (not she can join a section of video to my computer!?)

  Adobe Creative Cloud (now Yes...)

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• Problems with dynamic links between Premiere Pro and After Effects

  Hello

  dynamic binding (insertion of After Effects compositions on a Premiere Pro schedule) rarely worked properly since it was introduced. Problems vary (for example "media disconnected" made plates, old versions of comps rendered).

  What's worse, is that you can never tell what will be ultimately made out of Premiere Pro. Thus, a typical professional workflow to several projects together to finish during the day and batch overnight rendering can cause a catastrophe.

  Of course, the option is to not use dynamic link. Which makes then less competitive whole adobe.

  This subject has been widely discussed for years has been a dynamic links. I'm not the only one having this problem, and the problem is far from new.

  My only question is:

  Adobe: have you ever fix dynamic links?

  I don't really understand how you focus on software development in your company. The vast majority of the features of CC is little or not useful. The most important thing in a professional environment is consistent and reliable - performance can you please focus on that?

  I'm inspired to write this post because I just arrived in my edit at 07:00 only to find that my night makes is the wrong versions. All bed very well in the body and AE, damage the final rendering off Media Encoder used an older version of one of my compositions, and that I have nothing to send to my client.

  Janne

  Title edited by Kevin Monahan.

  Management of files Adobe seems to rely on the names and the last path of known files. Body loses links Dynamics (and other files) with frightening regularity in a situation where nothing has changed in the hierarchy of files, the files.

  16, when a hard disk of 8 GB was a huge drive, Pro Tools has been littering files on several disks because, as was the creation of audio files in real time, she had to. Digidesign introduced into a system which incorporated a unique program generated number in each file. Since that day I have never had a problem with lost files or correlate. I can move them anywhere, on any system and any PT session concludes that they are with total reliability - and we are talking about a lot of projects with thousands of files, through several studios. If you are looking for files, you can choose to use the identification number, the name of the file, the length of the file, or any combination of these. Which allows for the substitution of file.

  Until Adobe address this problem with a solution similar to that of Pro Tools, we'll be constantly beset by problems.

• How to see several audio files after dynamic link with After Effects

  Hello.  I'm using Adobe CS4.  I created a dynamic link between After Effects and Premiere Pro.  I have several files audio in my effects after composition, all positioned in approximately the right place in the timeline panel.  Can I still access each of these audio clips in Premiere Pro or first made a composite audio file of all the clips in After Effects?

  If the first is simply lump these in a big audio layer, what' his good workflow for fix all my audio clips?  Can I simply drag each file in a separate first track and reposition manually or is there a way to capture data from After Effects?

  Thank you

  Dynamic Link allows you to import an AE comp in the body, the imported clip is a composite - video and audio. Even if there is no sound in an imported model, Dynamic Link will create an audio track empty - one of the oddities of the DL. Therefore, you have no direct access to individual elements of video or audio clips used in the model of EI, when placed in a timeline of the organization.

  However, you can easily copy elements of film - in your case, audio - editing of your AE comp and paste it into a timeline of the Organization, as described here. I assume you have an animation timed to your audio tracks and want to preserve this - no problem. Just copy the audio clips of the AE timeline, position the CTI in the same relative position in the body and paste. Your audio clips will be placed in as many tracks that are needed (depending on duplication) and you will have access to each individual audio clip in the timeline of the organization.

• First refuses to re-bind AE clips created with dynamic link

  I have several projects created with clips created in After Effects, through dynamic links (that is, by replacing the original by an After Effects composition item). After the upgrade to 2015 CC, these clips appearing offline. When I try to recreate a link to them, first just won't do the job.

  That's what's happening: I click with the right button on the composition in offline mode and chose to recreate a link to Media. The Connect dialog box appears. I click on 'Search', and the program correctly detects the project After Effects corresponding to the composition. However, when click on this project, nothing happens, the program remains Oyen.

  It does´t if I click OK or directly on the project of EI, first simply does nothing. So far, reissue of links works. I need to recreate a link to these compositions. Any suggestions?

  

  I finally solved it by updating the first and AE. I thought they were already updated, but I was not running the most recent version of AE. That's all!

• Cannot exort of Premiere pro to Encore CS3 with Dynamic Link

  Hello

  I have finnished a projekt in Premiere Pro CS3 and when I want to export again with danamic link I don't have this option in the menu. I don't have the possibility to use the dynamic link to After effect.

  I have Premiem Production and use Vista 32 bit.

  I'm grateful for any help

  / Chris

  If the memories are good, this feature did not show up to CS4.  Using CS3, all you have is the export towards the option again, that does not DL.

• change timeline from first pro via dynamic link cs5 yet?

  I'm sure this has been covered before, but I can't find

  anything on the dynamic links in this forum.

  I created my video in still and export still sequence via dynamic links.

  Then, I created all of my menus etc in even, after which, I noticed a few glitches that I wanted to change, so I went back to the first and edited for changes.

  How to still bring back on these changes? It didn't happen automatically as I hoped, and I don't want to have to recreate my new menu structure in yet.

  So, basically, how can I make a change in the first and reflected it in my project again without creating a new project?

  Thank you

  Andy

  If you have converted the sequence Pr or generated the project already, then you need to file. Revert to the Original for en to update changes in sequences of Pr.

  -Jeff

• Premiere Pro CS4 dynamic link to Encore CS4

  I transferred a still CS4 Premiere Pro CS4 project via dynamic link.  I tried to play the scenario but only the sound plays video remains still each time that the marker is placed on the timeline, but the marker moves.

  Can anyone suggest what is the problem?

  Stephen Terry

  I do not understand: the marker moves?

  I leave Dynamic Link out of the picture.

  Export of first with a "Preset" mpeg2-dvd. You can change the speed of transmission a little upward.

  Import these two files (audio and video) in again.

• How to send the first video again through dynamic links

  Hello.  So I have the suite adobe for students, and I have a project in Premiere Pro, I want to make a DVD.  I exported before with DVD MPEG-2, but that takes a lot of time and energy, and I don't think that the export is as good as it could be (qualitative).  So I would use a dynamic link between the first and yet, but when I go to file-Adobe Dynamic Link - of dynamic link is greyed out and I can't click on it that would allow me to choose 'send to '.  How can I make this option not grayed out and send it to yet?  Thank you very much for your time!

  Well, if you do not use anything other than Premiere Pro CS6 and the corresponding CS6 still it will not work. They're both the exact same release.

  Many people still use CS6 Encore with new versions of Premiere Pro, so if you have any quality problems, export from Premiere Pro, you might want to address that publishes first.

• Adobe Premiere Pro: Adobe Dynamic Link requires Adobe Production Premium?

  Hi all!

  We have improved for some time there are versions CS4 CS5, but forgotten to delete CS4 in the thrill of discovery of CS5. This is two computers with Master Collection, but the problem, I want to talk is only occurring on one of the computers.

  We have uninstalled CS4 Computer1. And after the CS4 unistallation, Dynamic Link between Premiere Pro, After Effects and still will not work.

  2 computer got CS4 installed, and the dynamic link works on this workstation.

  These computers are the two Win 7 64 bit.

  How can I fix it? The dynamics were such a beautiful part of the Workflow.

  The updates that were published recently or patch or workaround. Cause, we tried to uninstall and reinstall and uninstall and reinstall and even ran the clean tool a few times.

  Thanks for any help

  Uninstalling previous versions AFTER installing a newer version cause this kind of damage. Best course of action is to simply reinstall CS5.

  Bob

• Big problem with Dynamic Link

  Hello, what happens is that I want to import software dynamic links don't show me not all the compositions, that I've done in After Effects.

  Indeed only it shows me as you can see in the example.

  Anyone know why this is?

  
  

  Thank you
  

  Problem solved, is that in the advanced layout options had resulted in model and therefore only saw the first composition. I have it in Spanish. Here I send screen shots. Thank you.

• Problem with dynamic link

  I have a list of the cities listed which are called in the dynamics of a table using MySQL
  When the customer registers the city is selected and every time the user adds a job and the number of dynamic links, how many jobs in the city.
  
  If the user clicks on the city and details for jobs in this city should appear.
  
  But the city is written as 'Chester & North Wales' in the database
  A few other cities/departments are written this way also.
  
  And when the user clicks on the link it evokes "there are no jobs for the submitted search criteria {Chester}. Please try another field. »
  
  It lacks the & North Wales little and only shows "Chester".
  
  Heres my php for the link:
  < div class = "smallTextCount" > < a href = "search_by_location.php? rest_city = <?" PHP echo "$row_jobs_locations [Francisco]?" ">" onMouseOver = "<?" PHP echo trim (preg_replace (' #[^ \p {L} \p {N} a-zA-Z0-9] + #u', ", $row_jobs_locations ['short-term']));? "> ()" onMouseOut = "mouseout/mouseouthandler() ()" > <? " PHP echo $row_jobs_locations ['short-term'];? > < / a > (<? php echo $row_jobs_locations ['job_count']? >) < / div >
  
  Heres my SQL:
  
  @mysql_select_db ($database_db, $db);
  $query_by_location = "SELECT * from the city OF"
  LEFT JOIN restaurants WE
  restaurants.rest_city = city.city_name
  LEFT JOIN jobs ON
  restaurants.rest_id = jobs.rest_id
  WHERE job_status = 'ON' AND rest_city = ' $_REQUEST [rest_city] "";
  $by_location = mysql_query ($query_by_location, $db) or die (mysql_error ());
  $row_by_location = mysql_fetch_assoc ($by_location);
  $totalRows_by_location = mysql_num_rows ($by_location);
  
  It's the message output:
  <? PHP} else {/ / if the PropID = empty then display table with Message? >}
  
  
  < table width = "100%" border = "0" class = "JobTextDescription" >
  < b >
  < td > there is no jobs for the < b > {<? php echo $_REQUEST ['rest_city'];? >} < /b > search criteria. Please try another field. < table > text

  The_FedEx_Guy wrote:
  > But in the database, the city is written as "Chester and North Wales.
  > Some other cities/departments are written this way also.

  That's your problem. The variables passed by a URL are treated as the
  name/value pairs separated by an ampersand. Your URL looks like this:

  search_by_location.php? rest_city = Chester + & + North + Wales

  Therefore, the value of rest_city is Chester. North Wales is considered
  another variable that has no value.

  Change the ampersand to the word 'and '.

  > Heres my SQL:
  >
  > @mysql_select_db ($database_db, $db);
  > $query_by_location = "SELECT * from the city OF"
  > LEFT JOIN restaurants WE
  > restaurants.rest_city = city.city_name
  > LEFT JOIN jobs ON
  > restaurants.rest_id = jobs.rest_id
  > WHERE job_status = 'ON' AND rest_city = ' $_REQUEST [rest_city] "";

  This requires user input unfiltered directly to your database, leaving you
  wide open to code SQL injection. You should always pass user input to
  mysql_real_escape_string() or in some other way before you filter it
  insertion in a SQL query. $_REQUEST is also less secure. You
  must specify where you expect the data will come - in this case,.
  Array $_GET.

  "WHERE job_status = 'ON' AND rest_city = '".
  mysql_real_escape_string($_GET['rest_city']). "'";

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS4",
  "PHP Solutions" & "PHP Object-Oriented Solutions.
  http://foundationphp.com/

• SpeedGrade crashing with dynamic link

  every time I open a project first pro cc in speedgrade through links dynamic or just open the project in speedgrade to open it crashes. is there a way to prevent that from happening? I'm using a windows 7, core i7.

  http://forums.Adobe.com/message/5807672

  You can try if this post can help solve this problem?