Replace a color with another specific RGB value

Similar Questions

• How can I replace a color with a pattern fill?

  Hi everyone, thanks for all the answers in advance!

  I've created quite a detailed design that works with 4 pixels per cm and 16 colors, canvas size 120x170cm. I'm wanting to replace all one color with a pattern, is there a way to do this?

  Can I replace a color with another flat color using the settings etc. but I want to meet all of an area of color with a pattern instead. The only way I can think to do would be to use the magic wand tool to select each pixel of the same color, then create a new layer and overlay with a filling of the desired design, however the design is so detailed, it would take me a terrible long to select each color!

  Can someone suggest a faster way of efficiant more to do?

  Thank you!

  Select--> color range

  Mylenium

• By mistake I replaced a photo with another file. The miniature shows always the original photo - is anyway I can get the original of this thumbnail image?

  By mistake I replaced a photo with another file.  The thumbnail still shows the original image.  Is there anyway I can retrieve the original of this thumbnail image?

  When a file overwrites (replaces) another... the original is gone.

  This happens usually when the replacement file has the same file name
  as a file exists and that you answer Yes when the dialog box asks you if you
  replace file a file b.

  What are the exact steps you used when the file has been replaced and
  This software has been involved?

• How to replace one table with another?

  I need to replace one table with another. Both tables have the same structure, primary keys, indexes, constraints, but different data (about 50 million records).
  I would like to make this replacement in line, with no passage of database in offline mode.
  There is no clause CREATE or REPLACE TABLE in Oracle unfortunely.
  I could use just DROP and ALTER TABLE RENAME instructions, but it is necessary that a user receive message error "table or view does not exist. It may be possible to block incoming requests at the moment, while old and new droppping table rename are performed?
  
  Thanks in advance.

  Hi again!

  You can detect normal users with session sessions $ v. A session of a normal user has a username (username of the column). Systemsessions PMON and SMON have no user name. So, you can use the following query to detect sessions, you need to kill:

  SELECT sid, serial#, username
  FROM   v$session
  WHERE type NOT LIKE 'BACKGROUND';
  

  concerning

• If I replace the control with another why DAQmx create channel once complain a false claim?

  I tried to replace the frequency by another control in the example found here complete PWM:

  http://www.NI.com/white-paper/2991/en

  However, I get the following error message:

  

  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: CO. Pulse.Freq
  Required value: 0.000000
  Valid values begin with: 22.300000e - 309
  Valid values ending with: 20.0e6

  Channel name: Dev1/ctr0

  Task name: _unnamedTask<10>

  My wiring diagram looks like this:

  

  If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

  My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

  There are two things to do.

  What I think you did now changes the scale of the handle.

  You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

  Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

  Value "Response to value out of range" Coerce to both Minimum and Maximum.

  I hope this helps.
  Let me know if you have more problems.

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• Why ps automatically replaces one font with another?

  I have a PSD with text block. any time I opened the file ps (5.5) replaces my police by another. I got this info 'some text layers may need to be updated before they can be used for vector output.  You want to update these layers now? »

  Two possibilities come to mind:

  1. the PSD file is a text layer that refers to a font that is not on your (most likely) system. If you are upgrading day and re - register (I recommend under a new name), the warning must away, but your text layers will have been activated using the substitute font. This could be allowed, or it might not, depending on your objectives and your needs. To dismiss the problem on the original file, you will need to find missing fonts and make sure that it is installed in your system. It's a good idea to restart Photoshop after the installation.

  2. one of the more fonts on your system are corrupt (less likely). There are procedures that you must follow in order to find, remove and replace or repair the corrupt police, depending on your operating system. A google search on "How do to find and fix corrupted fonts" should prove fruitful. I recommend you start by various Youtube videos.

• Replacement of colors with symbols

  Hello

  I have converted a photomosaic image to create a pixelated look

  on a picture of 725 x 725 pixels. The mosaic is 100 x 100 grid.

  I would now replace each color in the tile with a symbol

  It is possible, if so how?

  Thanks in advance

  Welcome to the forum.

  alby2014 wrote:

  -J' converted a photomosaic image to create a pixelated look

  -Mosaic is 100 x 100 grid

  -replace each color in the tile with a symbol

  Have you used "object > create object mosaic" to achieve this goal, or if you are speaking of something else?

• How can I programaticaly replace one Enum with another within a cluster

  Hello

  You can do that running. This requires a change in data type, which in fact means the application tries to change its own code (i.e. itself) and which is not allowed. You can use the script to replace things, but that is an edit operation, not a runtime operation.

  You can either replace this enum with a string, or you can use several controls as you had alluded.

• How to replace one color with each other?

  Hello

  I use Photoshop Version: 2015.1.1 to change a single image.  (I use the color Mode indexed with a color table custom that I created with only 8 basic colors.)

  My bitmap has a black background and a border of a pixel wide red around its perimeter.  I want to erase that border (replacing the Red pixels with black).  I can do this with the Eraser tool, but I have to drag them all around.

  I was wondering if there is a faster way to do it.  If there is a tool that would allow me to click on the red border, they are automatically the Red pixels that form this border change to black, it would be great.  If someone can tell me that if such a tool exists, I would really appreciate it.

  I should mention that the inner part of my bitmap has red pixels I don't want to change, so I don't have to replace all the Red pixels across in your drawing.  I just replace the consecutive red pixels that form the border.

  Thanks in advance,
  Paul

  Set your foreground to black color. Select >, then edit > Stroke, 1 pixel inside, then uncheck the box.

• Replace a pic with another pic / replace one image with another

  Hello

  I created a symbol with a photo and text. I duplicate my symbol and now I'll like to replace my pic duplicated using a new peak. Perhaps, it's simple, but I can't find the way :-(

  Hello

  I created a symbol with an image and text. Symbol of my I duplicated, and now I'd like to replace the image of my new symbol by another. Maybe it's simple, but I have not found how to do :-(

  If you want 2 symbols with different images, you need to duplicate the symbol in the library and then swap the image on them.

  or you can change the image in the code with attr or css.

• replace one image with another

  I have two images of the same radial venn diagram, created in Powerpoint. I caught the with Jing and create png: ILM_model and ILM_Mod1 (see images below).

  I want an image to blend into one another, so it seems that I am just pointing out the Center and support node. I tried simply fade on while the other fades in, but I get this weird distortion of red and yellow on the edges in the cross-fading. In addition, the image quality is deteriorated. I took a screenshot to show you.

  http://screencast.com/t/nygksaVXTJ

  

  Check the quality setting on the slide/s where you have this diagram and the value of high quality.  Your screencast looks like you could use only the low quality (8 bits) at the present time.

• is it possible to replace the wifi with another card?

  Hello

  I have a t400 with intel 5100 wifi card and now I want to install mac os on my laptop.

  problem is that mac os is not detecting the 5100 series of wifi card and I would like to know if it is possible to replace the current model 5100 with an old series?

  Is there any Center of service authorized in Uppsala in Sweden / Sweden for this?

  Thank you

  Limited wireless cards Lenovo Lenovo units certified to work with the brand machine. This is done through a white list in the system BIOS. Recently, I disassembled the last BIOS of T500/W500 (version 3.14 - 1: 06) and discovered the following picture of the white list. It's raw hex big endian joined with what I found by searching for the device ID's are redundant entries to change supplier codes.

  86803 B 428680111000 Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] network connection

  86803D 428680111200 Corporation Intel WiMAX/WiFi Link 5150

  868036428680111000 Intel Corporation ultimate N WiFi Link 5300

  868037428680111200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  868037428680161200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  8C161C008C16350000 Atheros AR5007EG

  EC107281EC1020E000 Realtek RTL8191SEvB (yuck, Realtek!) I wouldn't want one of these...)

  86803 8086:423D 428680161200 Corporation Intel WiMAX/WiFi Link 5150 D

  8680840086801513 corporation Intel Centrino Wireless-N 1000

  Your T400 comes from the same range and has probably the same list. Don't forget, you can buy a Lenovo brand unit.

  Also look for a PM with additional information.

• You can replace a laptop with another keyboard?

  I have a laptop with a Spanish keyboard, but I want to replace it with an English. Can you do this and if so, how?

  www.laptopkeyboardsworld.com

  Hello

  1. What is the brand and model of the laptop?

  2. don't want to physically replace the keyboard or just change the language settings?

  If you want to change the keyboard language settings, and then follow the steps from the link provided.

  How to change your keyboard type

  http://support.Microsoft.com/kb/258824

  You can also change the language options for:

  Regional and Language Options overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  If you want to physically replace the keyboard, then you will need to contact the manufacturer for more details.

• How to bind the form to an XML element with a specific attrib/value?

  Is it possible to link a form in Designer to an XML element using an attribute as a criterion value?  This is a very basic construction of XPath and I can't believe that the form designer cannot do this.  For example:

  < library >

  < book lang = "fr" >
  Harry Potter < title > < /title >
  < price > 29.99 < / price >
  < / book >

  < book lang = "MS" >
  < title > Learning XML < /title >
  < price > 39.95 < / price >
  < / book >

  < / book >

  I would bind only the knot book with an attribute lang of "eng".

  [The simple xpath reference would be: bookstore/book[@lang='eng']

  Thanks for any help that anyone can provide.  I am new to LiveCycle Designer

  Jordon

  You must use the below expression in data binding, property to get the title of the book whose language is English

  .book $. (lang.value == "eng") .title

  Thank you

  Srini