replace black color

8669c8ccea987661a1dd9252eb84240e_1.jpgI need to replace black in the present with other options of color for my friend who is the designer and wants to see how other color combinations work and I tried replacing bothe color and hue saturation methods but they allows firstly the bizarre neony results and works at all. Any ideas? Thank you! :))

Hi Carmel,

Its black never easy evolution how be it in Photoshop. A girl with black hair generally turn a blonde is closing impossible to do convincingly. As soon as you lift the luminance of the lack of detail information appears immediately. However, it may be false. Do not expect to be able easily to bright yellow or orange intense and keep it looking real.

If this level of quality is high enough to you how you do it. I'm afraid that this is not a topic to beginners but if all goes well

You can experiment

First take the original image and reproduce them. We are working on the layer duplicate or higher.

(1) with the tool lasso around all black areas draw. Here is a very rough selection

(2) in a store the selection in quick mask mode.

(3) go to the color range. What we were doing before was only to give color range, a good starting point, do not make a good choice.

In the drop-down list select shadows and if you set the blur, but its not required. This will give a reasonable

selection of black areas. Create a layer mask so only the black areas are visible. You will always have the original image in the stack of layers provides the background.

(4) now how the color is changed. Create a gradient above the hidden layer map. Set the layer mode to color. You may need to pick up the cards degraded, but essentially, you have a simple gradient and color at one end of the gradient is mapped on the darks of a picture

and the color at the other end is mapped to the light of an image. Gross over simplification, but it is the principal. So, if you start with a simple

black-white gradient and change the black to tell red he maps the color red to dark areas of the image. The white end of the gradient can be left in the

White as the image is largely black. You need to cut the card of the hidden layer gradient - that is important. You will find black in the object will be replaced by the red, but the bottom layer is not affected.

(5) now, create a hue saturation adjustment layer and clip that to the gradient map. You will find you can now move the hue and change saturation

and even the luminance.

(6) Finally, use a curves layer to fine-tune the contrast.

I've only used a red on white gradient here, but you could experiment with several layers of the gradient map and this will probably give you a better range of colors

Hope that helps

Terri

Tags: Photoshop

Similar Questions

  • Black ink (symbol of bow tie) lack of replacement of color package

    I recently ordered a replacement of color which included CMYK (364 for C309a printer code). However the K (black) was not the version of the bowtie symbol. It was the symbol of the black Pentagon for printing of daily.

    Is it possible that this can be used for photo printing or am I resigned to try to find a single cartridge black knot Butterfly? Currently, I am unable to find the cartridge of the Pentagon symbol (code: 2011/07) online.

    Thanks in advance.

    Paul

    The bow tie, one is the Photo black cartridge, you can buy online at SureSupply

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead/cartridge-compatibility-how-to-find-out-which-cartridges-are/TD-p/740561

    More details on the Photo black cartridges in the link below...

    http://support.HP.com/us-en/document/c01839024

  • Replace the color of the black icon

    Hello

    I am a photoshop newbster and I'm faced with a pretty easy problem: I would like to replace the icon below color with another color (say green).

    I tried both methods I found on the web:

    1. Replace Color tool-> does not work with black

    2. use the magic wand to make a selection, then the paint bucket to fill the new color. Yes, it looked like a 2-year-old called on the phone.

    Can you provide me with a few steps to replace the color on this icon, so it looks decent?

    Thank you!

    Phone.png

    You have luck with this image, because it's on a transparent background. At the top of the layers palette (next to the word Lock) click the grid icon. This locks the transparency. Then just choose your color and paint on the entire Web. Only the pixels that already had the color will pick up the new color, and they will retain the same level of transparency they had in the dark.

  • HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

    HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

    I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

  • Ink black/color ink

    DeskJet D4160

    Windows XP

    As I rarely print in color, can I replace my with another black and white cartridge color cartridge?

    Bob H

    Impossible to replace the color with a black cartridge cartridge.  You can remove the cartridge color completely and print in 'reserve mode', where the printer would automatically return to B & W.

  • Replace Document colors Bug

    All known bugs to replace the colors in the document?  I am running windows 7 with new Acrobat Reader DC.

    For example, if by default my document is black text with a white background and I change the white text and black background (Edition > Preferences > accessibility), I now have with black background and white text pages and other pages unreadable with black text on a black background.  Again, I have change the green on a black background and yet my entire document has a black background, but now some pages contain the green text, others have white text, and others have black text and cannot be read.

    What is the fix for this problem of accessibility?

    This does not solve the problem.

    The problem seems to be that Acrobat Reader only changes the color of the text for a single page in the document.  I found a work around by going to Edit > Preferences > accessibility.  There's a box of "change the color of the art online as well as text.  If this box is checked, then uncheck the box; If it is not checked, then check that it and the color of the text for all of the document should now be correctly formatted.  This procedure seems to ignore any bugs in the code it keeps updating the color of the text on each page, but these steps should be done whenever you need to change the color of a word processor based PDF.

  • How to replace one color with each other?

    Hello

    I use Photoshop Version: 2015.1.1 to change a single image.  (I use the color Mode indexed with a color table custom that I created with only 8 basic colors.)

    My bitmap has a black background and a border of a pixel wide red around its perimeter.  I want to erase that border (replacing the Red pixels with black).  I can do this with the Eraser tool, but I have to drag them all around.

    I was wondering if there is a faster way to do it.  If there is a tool that would allow me to click on the red border, they are automatically the Red pixels that form this border change to black, it would be great.  If someone can tell me that if such a tool exists, I would really appreciate it.

    I should mention that the inner part of my bitmap has red pixels I don't want to change, so I don't have to replace all the Red pixels across in your drawing.  I just replace the consecutive red pixels that form the border.

    Thanks in advance,
    Paul

    Set your foreground to black color. Select >, then edit > Stroke, 1 pixel inside, then uncheck the box.

  • Replace the color dialog bug?

    The dialog box redefine does not replace the color of objects filled or rubbed with pure black, CMYK or RGB. (Yes, the Recolorier Art selected checkbox). The dialog box replace any other color but not black. Not even a manually created intense black. Manually by selecting another color in the color or Swatches Panel changes it from bottom or edge of the object.

    This happens both CS6 and CS5 on Windows 7 x 64. I reported it as a bug on the site in version beta, but I wonder if anyone has any info on this. Also do not know if bug reports are always read for the final version.

  • Cannot replace the colors in the document (background and text)

    I have many documents to read, but the glaring white background of PDF files really hurts my eyes and I end up getting migraines.

    I changed the colors 'document' [Edit > Preferences > accessibility > Document Color Options > replace Document colors > custom color: Page Background gray =;] Text = Black]

    Adobe Reader.JPG

    I have the "Replace Document colors" checked, and I chose Custom colors (gray, black background text).  However, this does not change the background color and text of most PDF files.  Even if everything is checked, when I press OK, the document remains black on white text.

    Help, please...  Thank you!

    However, this does not change the background color and text of most PDF files

    This does not change the color of scanned documents.

  • Black color of display problem turns red

    I have Hp G42, and has recently created a problem. all black color of my screen turn red colur. I have check the driver and updated also. no improvement.  splash screen also shows the red color. Difficult to deal with this problem. Please give me a solution.

    Hello vichuboy,

    I understand that the color is wrong on your screen.

    Connect an external monitor to the laptop and see if you experience the problem on the external monitor.

    I would like to know how everything goes.

  • OfficeJet Pro 8500 a (A910a): [HP Officejet Pro 8500 a] print issue, especially in black color

    Hello

    My HP Officejet Pro 8500 printer all-in-One (A910a) almost does print in black color more and some colors have a few lines. You can view the Diagnostic Self Test Pages I printed here.

    Hi @CuiZinieR,

    Welcome to the Forums of HP Support!

  • HP Deskjet 3545 A9T81B: 1 game free 678 cartridges (black + colors)

    1 free 678 game cartridges (black + colors)

    After recording the printer online, I'm not able to find out where to send the application to the Set of available cartridges.

    Has been mentioned as a choice of supply for this model.

    Hi @ParveenSharma,

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

    If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  • I replaced my color for an officejet v40xi ink and red ink does not work.

    Red ink ran out so I replaced the color ink cartridge in my officejet v40xi and Red does not.

    What can I do to fix this?  Thank you.

    Hi timinob,

    I understand that your printer is not printing red ink.  I'll take a look at the document below.

    OfficeJet v40xi

    Let me know how it goes.

    * If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations. **

  • A jpg still print with white lines spaced, but I replaced the color cart.

    A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

    Hello

    That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

    A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

  • How can I change the black color at the top of the screen? color is givong me a headache.

    How can I change the black color to the screen? I tried all the usual stuff. I installed IE9.

    Hi JOEGWF,

    For instructions on changing the color, see the following article:

    Change the colors on your computer
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-colors-on-your-computer

Maybe you are looking for