Tecra A6: DVD-RAM UJ - 841S region code is locked

Similar Questions

• Question about area with a rug code * a DVD-RAM UJ - 841 S

  Hello!
  I have a Toshiba Satellite with a CARPET * a DVD-RAM UJ - 841S. Someone knows something about the firmware for this? I tried to use dvd43 and VideoLAN, but it does not work properly!

  I guess you do you want to Flash the firmware to remove the region code of the DVD player.
  Am I wrong?
  Don t do it! It risky s.
  If you update the drive with the wrong firmware or is not compatible the drive is not able to read/write to the media; CD and DVD.
  In addition, the use of the incorrect firmware will avoid the reorganization of the training by the BIOS.

• Tecra A8: Mat * un DVD - Ram UJ - 841 s is not read / burn any disc

  Hi all

  I have a laptop Tecra A8 with Mat * un DVD - Ram UJ - 841 s. This device is not read / burn any disc. However, Mat * one bed the recovery CD at startup.

  I tried everything: I deleted the registry entries (lower and upper), I uninstalled Ant again once the driver installed... but it doesn't work. Any help?

  Best regards

  Ribera.

  Hello

  In addition to the fact that you can boot from the Toshiba Recovery CD, I think that it s a problem of training material
  I think it's a matter of calibration of lens readers possibly the lens can not calibrate correctly in the right position of s, and this is why the drive can't handle the inserted media.

  This could be the worst case, because this fault is repairable by replacing the drive.

• Need firmware for Mat * a DVD - RAM UJ - 841S to make the region free

  Can someone help me as where to find a Firmware for Mat * a DVD - RAM UJ - 841-S, the,(MTFOPD-01170000-UN.exe) one i found is for another laptop.

  I need to be able to watch the region 1 and 2 because of me travel and the number of these two that I own.
  I have three options.
  1. install a new drive.
  2 use an external hard drive
  Firmware 3.

  The latest is the one I prefer.
  Can someone help me.

  Hello

  Sorry, but the firmware update will not remove the DVD region lock.
  The fact is that you can change 5 times this option, then the option is locked and it of not possible to change it.
  Unfortunately, there is nothing to see!

  If you wish, you can consult this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10828

• Satellite A100: Mat * a DVD - RAM UJ - 841S will not play modern DVD

  It's weird, music CD's fine, game DVD and data DVDs no problem but if I want to watch a recent movie, my dvd drive is disabled. What a weird copy protection? I bought this partially to watch movies when the main TV set wasn't available and I feel ripped off the coast. Old DVDs are fine (the monster inc etc). Work on this late nights trying to see what is wrong. The DVD even work on my friends mac so I don't understand. He believes that it is a windows thing done on purpose.

  Help!

  Date 2007-01-14 15:22:54

  [Information on PC]
  Model name Satellite A100
  Part number PSAA9A-118038
  Serial number X6453812Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 2.00
  Processor Genuine Intel(r) CPU T2250 1.73 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 100,027,630,080 [bytes] 93.158 [GB]
  Capacity of the hard drive space free 91,356,422,144 [bytes] 85.082 [GB]
  Video NVIDIA GeForce Go 7300 version = 8.4.6.8
  Screen resolution 1280 x 800 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5200
  Version of Intel (r) PRO/1000 PL Network Connection Network 9.2.24.0 = 00:A0:D1:4 B = MAC address: 59:40
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 10.1.0.13 = MAC address
  TOSHIBA Software Modem Modem version = 2.1.62.0
  IDE Device 1 HTS541010G9SA00
  Interface IDE 2 no
  IDE Device 3 MAST * A DVD-RAM UJ - 841S FW version = 1.60
  Interface IDE 4 no
  Interface IDE 5 no
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  EC/KBC Version «»
  PS-MICOM Version «»

  [Information QFE]
  Windows Update "KB873333.
  Windows Update "KB873339.
  Windows Update "KB884018".
  Windows Update "KB885250.
  Windows Update "KB885835.
  Windows Update "KB885836.
  Windows Update "KB885855".
  Windows Update "KB886185.
  Windows Update "KB887472.
  Windows Update "KB888111WXPSP2".
  Windows Update "KB888113.
  Windows Update "KB888302.
  Windows Update "KB889673.
  Windows Update "KB890046.
  Windows Update "KB890175.
  Windows Update "KB890859.
  Windows Update "KB891781.
  Windows Update "KB893056".
  Windows Update "KB893066.
  Windows Update "KB893357.
  Windows Update "KB893756.
  Windows Update "KB893803v2.
  Windows Update "KB894391.
  Windows Update "KB894871".
  Windows Update "KB895200".
  Windows Update "KB896256.
  Windows Update "KB896358.
  Windows Update "KB896422.
  Windows Update "KB896423.
  Windows Update "KB896424.
  Windows Update "KB896428.
  Windows Update "KB896688.
  Windows Update "KB898461.
  Windows Update "KB899587.
  Windows Update "KB899589.
  Windows Update "KB899591.
  Windows Update "KB900485.
  Windows Update "KB900725.
  Windows Update "KB901017.
  Windows Update "KB901214.
  Windows Update "KB902400.
  Windows Update "KB904706.
  Windows Update "KB904942.
  Windows Update "KB905414.
  Windows Update "KB905749.
  Windows Update "KB908519.
  Windows Update "KB908531.
  Windows Update "KB910437.
  Windows Update "KB911280.
  Windows Update "KB911562.
  Windows Update "KB911564.
  Windows Update "KB911927.
  Windows Update "KB912919.
  Windows Update "KB912945".
  Windows Update "KB913580.
  Windows Update "KB914388.
  Windows Update "KB914389.
  Windows Update "KB914440.
  Windows Update "KB915865.
  Windows Update "KB916595.
  Windows Update "KB917344.
  Windows Update "KB917422.
  Windows Update "KB917734_WMP10.
  Windows Update "KB917953.
  Windows Update "KB918439.
  Windows Update "KB919007.
  Windows Update "KB920213.
  Windows Update "KB920670.
  Windows Update "KB920683.
  Windows Update "KB920685.
  Windows Update "KB920872.
  Windows Update "KB921398.
  Windows Update "KB922582.
  Windows Update "KB922616.
  Windows Update "KB922819.
  Windows Update "KB923191.
  Windows Update "KB923414.
  Windows Update "KB923689.
  Windows Update "KB923694.
  Windows Update "KB923980.
  Windows Update "KB924191.
  Windows Update "KB924270.
  Windows Update "KB924496.
  Windows Update "KB925398_WMP64".
  Windows Update "KB925454.
  Windows Update "KB926239".
  Windows Update "KB926255.
  Windows Update "KB928388.
  Windows Update "KB929120.
  Windows Update "KB929969.
  Windows Update 'Q147222 '.

  CD/DVD TEST (D:\) PLAYER MADE FAIL

  Could you tell us what films (title), you have a problem with?
  Perhaps you have trouble with the more recent Double-Layer (9 GB) DVD.

  Of course, it may be a copy protection, too cause some movies using a very unusual way to make sure that they play on a "locked region" disc.
  Using any software on your laptop that are able to "Rip" or "simulate" a DVD? If so, that the existence of such software could prevent the normal functioning of the specific movie titles

  Many films are also not not not to work on the readers of 'Region free '. These DVD movies check if your player is able to play a 'region' that is different than the current DVD that plays, and if they do, they will not start.

  Give us some comments over on that and perhaps we can find the reason for your question.

  Concerning

  chain

• Satellite Pro A100 (PSAAC) DVD-RAM UJ - 841S cannot read audio CDs

  Sat Pro (psaac) DVD-RAM UJ - 841S will not read or play the audio CD
  Everything else works fine but put in any audio cd and nowt.
  Help?

  Hello

  As you know, each CD is compatible and supported by each optical drive.
  Can I ask you this and audio CD don t work? These are original audio CD or burn one?
  You should know that many new audio s CDs come with copy protections of different and sometimes it happens that these CD s are not readable.

  But we must first know if need all options are enable. To do this you must enter the properties of the drive and check if the option enable digital CD audio for this CD-ROM device has been activated successfully.

• Problem with Mat * a DVD - RAM UJ - 841S Satellite M70-165

  Hello

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Then the CD/DVD unit can read the DVD-audio, CD, or movie, but when I open a DVD (DVD software) data it is said that "it is not possible to access the D:\". ». and some time "poblem whith I/O device. and the same problem that I have with some new cd (which were not burn)
  I have'nt try every thing. I come here to ask the question.

  Sorry for my bad English

  THX

  You can do the following: go to download drivers of Toshiba Europe site and check if there is an update of firmware for this specific player. If so, I strongly recommend you apply and check if it works.

  If the didn t of the firmware update worked later you assumed that the reader is defective and must be replaced.

  Welcome them

• CARPET * a DVD-RAM UJ - 841S: cannot burn DVD/CD more

  Hey people,

  I have a problem with my DVD/CD drive, I can't burn files more. My CARPET * a DVD-RAM UJ - 841S can always install things of CD and erase DVD/cd but I can't burn more.
  Anyone know how I can fix this problem?

  cordially Egbert

  To me, it seems that the lens of the drive can not calibrate correctly
  The bed or write drive before the middle of the lens is calibrated in the right position.
  If it fails, the drive is not able to manage the CD or the DVD.

  Usually nothing help to wait for disc replacement

  Oh wait maybe a cleaning the lens help
  You can try to clean the lens. You can use a lint cloth

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• Satellite L20: Cannot watch DVD movies due to region code

  Where can I find drivers or patch or firmware for my cd/dvd rom drive model - Mat * un UJ841S?
  I can't open the dvd movies because I don't have the drivers for the region. Treadmill * a web of firmware is not any driver for this model instaled in toshiba.

  Hello

  I'm afraid, I have bad news for you m.
  If you want to watch the shape of U.S. DVD or another continent you need to change the region code of the DVD player.
  But you can change the region code 5 times only.
  Then it of not possible to change the settings more.

  The new driver or firmware update won't help in this case.

• Tecra S2 DVD - RAM mast * a UJ - 830 s

  On the page of the driver of the TecraS2 there is an update for the carpet * a DVD - RAM drive.

  Only when I start it it gives the error.

  The target disk is connected nit.

  Well, I know of course that it is now only one thing that I noticed and that AI says the F/W charger (in the upper area of blue Hey) F/W charger UJ - 831B_V1.02_01

  My S2 is provided with a UJ-830 s firmware v1.oo.

  Is the charger F/W for the different 830 831 a can they use the same software?

  If this isn't the case, Toshiba please put correct drivers it for 830 versions.

  Hello

  are you talking about drivers or firmware? And where did you find the UJ - 831B_V1.02_01? AFAIK there is no update available for the S2 with XP driver.

  Good bye

• Equium A100-549: Mat * un DVD - Ram UJ - 841 s is not accessible

  Hello
  I have read many topics all about problems with this unit, makes me regret buying the laptop, but for now, I'll have to try to fix it. My DVD device, I cannot access it if I put in a blank DVD or CD-ROM drive. When I click on the camera by computer or of the auto run pop-up menu, an error message appears saying "D: is not accessible incorrect function". If I insert a disk with some data on it it reads it quiet easily (DVD and CD-ROM of so it's not the calibrator laser). After reading works around the problem, I did the following:-

  -First I tried accessing the page of toshiba and reloading the drivers, without success

  -J' the continuation of many shooters of boredom, unsuccessfully tried

  -J' even tried formatting my laptop and reinstall windows (incidentally this violates my warranty and insurance?) and subsiquently once again, without success drivers

  I need help, and not only its desperate thank you very much!

  Hi André,.

  First, reinstall your system from the recovery CD will affect your insurance or guarantee. You can reinstall as often as you want.

  As for you problem with your optical drive, the first thing to check is that the option "Enable the Reording CD on this drive" is checked in the properties of the device option. Just right click on your optical drive in ' my computer and then select Properties option then the "recording" tab

  Finally, you shouldn't have to download all the drivers for your scanner, Microsoft base drivers are generally quite adequate. Usually, the drivers of Toshiba DVD-RAM support formatting of re = writeable disks and not the functioning of the drive itself.

  Kind regards

• Carpet * a DVD - Ram UJ - 841 S DVD burnning speed

  HAVE someone at - IL FOUND in DVD THAT WILL WRIGHT A 8 x DRIVE on THIS DVD RAM. PLEASE LET ME KNOW.
  RITEC G05 NO GO will BE ONLY WRIGHT to 6 x a FEW TIMES at 2 x

  Hello

  What model of laptop comes with this drive?

• Re: Mat * a DVD - RAM UJ - 841 S DVD does not close on Satellite M70 - 164

  Hello

  A DVD has been badly inserted in the neoconservative DVD player open it via the Open button, having to resort to the emergency of trombone solution.
  Now, the player does not close.
  Any suggestions?
  Should I replace?
  Best regards

  Hello

  > A DVD was badly inserted in the DVD player neoconservative it open via the button open
  In my opinion the wrong disc was the STRANGE. Possibly mechanical parts few are not ok.
  I think that the STRANGE must be replaced and in my opinion he s the one and the only solution.

  Welcome them

• Carpet * a DVD-Ram UJ - 841 s cannot read CD - R.

  Hello
  I bought my laptop about 8 weeks, but I am unable to post pictures on all of the discs that I inserted into my laptop.
  When I insert a cd - r in the drive of the laptop recognizes there is a disc in the drive, but when I open drive D there are now images inside.
  I know this is nothing to do with picture package because one of the cd - k-r was made by using the same package as the one I have on my laptop.

  Also, I am able to watch DVDs and listen to music CDs
  I'd love to hear any advice on the supply and how I can fix this strange problem.

  See you soon,.
  Dave.

  Hi Dave

  Sorry, but I'm a bit confused with your ad. You wrote that you can watch DVDs and audio CDs to listen to. I assume that your reader is working properly. Please remember that all images are saved on CD as data. I put t know what you mean with picture package, but the CD is created as data disc should avoid any problems.