Replicator port and battery charge problems

Similar Questions

• Satellite 1130 battery charge problem

  Hi, just joined this site. I have a Satellite 1130 and seem to have a battery charging problem. Every so often, without regular pattern or a set of events to help the machine starts beeping and the Red charge blinks, as if the battery charge runs out, it is, but it happens when the charger is plugged - green power light shows that it is connected, but it is not the battery. The only solution I found is to turn the power off, disconnect the battery and back again. Then everything works until the next time.

  Any ideas?

  [Edited by: admin April 23 05 18:07]

  Hello

  It is possible that there is a problem of electronic power supply. If the power supply microcontroller detects an error lamp DC IN sends a code flashing (8-bit error code). Can you please check it if the led blinks 8 times sending the code?

  You can try to contact the Service partner, explain the problem and I'm sure they can give you a clear explanation.

• kernel_task and temperature of close to battery charger problem

  Hello

  I have a Macbook Pro 13 "2011 with El Capitan (10.11.1) start installed.

  Some time ago I started to have problems with the device. KernelTask would go up to several hundred or even thousands would rise percent utilization of the CPU and fans. It seems to be a workaround, as described here:

  948 http://forums.macrumors.com/threads/How-to-solve-kernel_task-High-CPU-usage.1706.

  I quote from this thread:

  ' 1. go about this mac under the Apple in the top left and then click more information.

  2. click on the system report

  3. take note of what he said after the model identifier

  4. go in your master drive - system - library-Extensions - IOPlatformPluginFamily.kext - table of contents - Plugins - ACPI_SMC_PlatformPlugin.kext - content - resources - find the name in step 3 and move it to a folder that you can find again if needed.

  3. reboot and you're done.

  I did this and the Macbook is still usable. But the fans are very high, the majority of the time and it's always a bit slow.

  I used a program to see the temperatures, the sensors detect. Everything seems normal except "proximity to battery charger": 127 ° C!

  Anyone know what this means and what we can do about it?

  Consider the possibility of a conflict of third party software.  You can get an idea of what is running on your computer via EtreCheck.

• Battery charging problem

  My iPhone 5s has recently had a charging problem. Got off the phone with about 18% battery life left but when I plugged in to a charger it came back to life and showed 18%. However, with the charger plugged in now never charged iPhone or it does so very slowly. He fell to 16% and stayed there for about 2 hours. Eventually, he started to decline while still connected to the charger until it was empty and closed. I then connected on two different Chargers and he wouldn't return. I left him in charge all night and he was still dead in the morning.

  I had subsequently replace the battery and the charge was 34%. I decided to run low before the additional load as it was a new battery and better empty before recharging. However, the loading has become incredibly slow. I managed to load of 5% to 30% in a few hours, and then he stayed on 30% for 2 hours while I backed up things on my Mac and iCloud. I then continued the charge during the night and in the space of 10 hours, that she went from 30% to 95%.

  Why so slow taxation? I use an Apple USB with a new battery. My software is updated to January 27, 2016. Could there be a problem with the loading port, event, although she acknowledges the Chargers whenever they are connected.

  Hi Denzel_26,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPhone. Looks like you've been on the right track in your troubleshooting. If you are still having problems charging the battery of your iPhone, you can check the troubleshooting steps described in the following article, up to and including contacting Apple Support if necessary:

  If you are unable to load your iPhone, iPad or iPod touch - Apple supports

  Concerning

• Questions about the BIOS update and battery charge on Satellite M30 104

  Hey,.
  I try to update my BIOS, but it does not work because my battery won't charge any more, if a window always tells me that my battery is not enough. Yet, the reason why I'm updating my BIOS is that I read in a forum that might solve my problem of battery charging.
  I'm fairly certain that the battery is not the problem itself: I bought a new battery, it worked for 10 minutes once or twice, then again the load stop completely.
  If anyone knows what the problem is or how to update my BIOS, please...

  Hello Celia

  I am not a technician, but as far as I know, BIOS has nothing to do with charging the battery. In my opinion, there are some problems with e-procurement (electronic load). Sorry, but I imagine that you must contact the partner in your country.

  They have diagnostic tools and it can be verified. Please call and simply explain the situation.

  Good luck!

• X120e Battery Charge problem

  Hello

  I bought my x120e about a month ago and it's been great since, but recently I had problems with the battery. When I charge the battery to 100% and then unplug the power adapter, the battery is fine for an hour or two, and load will decrease to a normal and regular rhythm (indicated by the percentage). However, when the battery is at 75-80%, then he jumps abruptly up to 10%, and I get a message that I have to charge the cell phone or turn it off. When I connect and start loading again, the battery charges at a normal speed of about 10 to 40%, but the same thing happens and it jumps up to 100%, saying it is fully charged. Generally, I would be happy with such a fast charge, but in this case the battery is not really full as soon, he dies suddenly after that I have unplug the adapter. Even if I let it continue loading at 100%, the same thing happens.

  So, I was wondering if I could do something to fix this on my own, or if I should send it just come back on the one year warranty. Please tell me if I did not know by describing the problem and thanks for any help/suggestions!

  I just wanted to post an update. I thought that my explanation of my problem of battery gave a negative perception of the ThinkPad x120e and lenovo in general, but I called the customer service of lenovo today and after 15 minutes, the representative has verified the problem (battery was indeed defective) and sent a new battery in my house. Overall, I am very satisfied, and I think that this problem of battery was only an isolated case. The battery is supposed to come in 2 days!

• Downgrade of BIOS N100 (problems of USB voltage and battery charger)

  Hello. (Sorry for my English). I have problem with my computer laptop lenovo 3000 n100. I must downgrade my bios to version 1.08, because I have problem with USB - when I click on a button on my keyboard for example my USB was disconnect. Can someone tell me what should I do to downgrade? (Windows XP SP2)

  I have download v1.08, install, but when the program flash my new version of bios of my laptop BSOD 1 seconds...

  Concerning

  
  

• Battery charge problem

  Good evening.

  The problem with the battery of my XPS 17 L702X started a few months ago. My House has lost power 3 or 4 times in 2 minutes while my laptop was connected to the grid. Since then, my laptop not charging the battery. The message is: "plugged in, not charging. I bought a new battery, but the problem persists.

  Thanks for any help.

  Salvation ROAD, map

  You use the original Dell adapter for the model of this system? The adapter is frayed? The adapter stays in the company when it's plugged in or it falls easily?

  Reboot the system and press the f2 key to enter the BIOS - check the adapter status in the BIOS with and without the smart card. In addition, shake the plug of the adapter at the end and check if the status of the card changes at any time.

  Test with another adapter to power if possible.

  If the port is loose, then the DC port must be replaced otherwise, the adapter must be replaced.

  If there is no guarantee, then you can contact our team to get a quote for a paid service call - http://dell.to/1vnT6CQ

  Write me a private conversation with the service number and your contact information (name and Email) for files.

  Let us know if you have any other questions.

• EliteBook 840 G2: Elitebook 840 G2 + Replicator port 3005pr not charging

  I had a 3005pr for the Elitebook port replicator.

  I am conecting to USB with the small thuntherbolt in there (the one nearest the port vga on the left side) power connected to the port replicator, and everything is fine (screen, keyboard, network, audio...), but laptop will not load.

  I thought it was supposed to recharge thought USB, but not connected to the power icon shows under windows.

  .... I thought it was supposed to recharge thought USB, but not connected to the power icon shows under windows.

  Hello

  No, you must connect laprop charger to recharge your laptop.

  Kind regards.

• Satellite A660 - battery charging problem

  Hello everyone. I have problem with my laptop to load for a while.

  Laptop is charging for a few minutes and suddenly battery LED starts blinking pink, my battery is not reload then and I need to get out and reconnect the charger.

  Sometimes, I need to do this once for two minutes.
  Icon on the screen indicates that the battery is not supported and it is written how much % left. I've been looking for similar problems, but I didn't notice someone who speaks of the pink flashing LED.

  Everyone guess what is the problem? Thank you very much.

  Hello

  In think you should check out new battery.

  Is that battery will begin to lose the performance after a certain operating time and sooner or later each battery needs to be replaced.

  I m not quite sure about battery malfunction, but I guess that this part is easy to replace and should be checked in the first place

• Satellite C650D - battery charging problem

  After unloading when I plug it in to the charger. With the exception of the computer laptop direct charge battery start work on feeding until I take the battery, then after 5 seconds when I start to charge the battery, then it plugin.

  In short to load I have to take out the battery once and then it starts to load. Why is it?
  It poses problem for me.
  Help out me

  Hello

  Check if you can update the BIOS.
  I read somewhere in the forum that the update of the BIOS solved some problems of dough
  One of my friends had a problem where the battery was not recognized by the system and could not pay correctly update the BIOS helped

• Satellite M70-165 PSM70E - battery charging problem

  Hello
  My laptop is a Satellite M70-165 PSM70E. I use Windows XP Home Edition. I recently bought a new battery and it is impossible to charge more than 50%. I have updated the BIOS to 1.70 (for non Windows Vista users) and I still have the problems mentioned above. I tried to dischage completely and charge it again, several times, with no luck.

  Is there a solution?

  Another question. There is no 'EC' in the BIOS version, only "BIOS version 1.70". I hope there will be some calibration of the battery or the power management after the BIOS update, but there is no menu "Power Management" in the BIOS.

  Is this correct?

  Thanks in advance.

  > recently bought a new battery and it is impossible to charge more than 50%

  In my opinion the new battery is not OK.
  You must consult an another new battery maybe you bought a battery already used?

  > Another question. There is no 'EC' in the BIOS version, only "BIOS version 1.70".
  On the page of the Toshiba UE driver you can find a BIOS update.
  I guess that this update contains the EC update too.

• Satellite click on Mini - BIOS and battery keyboard problem

  A mod can explain please why all my messages complain that Toshiba cannot resolve the well-known problem of the Mini click keyboard battery have been removed?

  Caveat emptor, it seems that not only the product does not work as advertised, but all attempts to engage the problem and alert the community seem to be censored, too...

  Please try this (which worked for me)

  Turn the laptop completely off by holding down the power button.

  Place it in the charger.

  test to see whether or not he is totally turned off by quickly tapping once on the power button. You should see two indicators of battery.

  Wait for the top has accused...

  When you see that the load indicator is on the second battery, this unfortunately will not charge it. However...

  Press the quick power button to see the two indicators.

  Remove the plug from the charger to the laptop (not the wall) and reinsert it back quickly

  Then wait...

  After 20 minutes to feel the charger on the wall... If it's hot, it recharges the battery in the keyboard...

  Use Bios 1.7 or 5 before you do (I tried it on 5 bios)

• G780 battery charge problem

  Hi guys, I discovered recently a problem with my battery. It stops just to 60% during charge and simply displays: plugged in, does not support later. I have Lenovo energy management and I tried to run the battery reset meter and finally after a long process the same problem of 60% of the charge occurred. Can someone give me a cause of suspicion it's only 1 year that I have my laptop and I take really good care of him and these things are kinda stressing me .

  Nice day.

  Please take a look at the photos at the point #2 of the neokenchipost:

  http://forums.Lenovo.com/T5/Lenovo-3000-and-essential/AC-power-questions-G505s/m-p/1686047#M59533

  Looks like you have optimized the battery or Mode of Conservation (depending on your version of Windows). If so, she works as designed stopping at 60% load.

  Does that help?

  Kind regards.

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?