Satellite A660 - battery charging problem

Similar Questions

• Satellite 1130 battery charge problem

  Hi, just joined this site. I have a Satellite 1130 and seem to have a battery charging problem. Every so often, without regular pattern or a set of events to help the machine starts beeping and the Red charge blinks, as if the battery charge runs out, it is, but it happens when the charger is plugged - green power light shows that it is connected, but it is not the battery. The only solution I found is to turn the power off, disconnect the battery and back again. Then everything works until the next time.

  Any ideas?

  [Edited by: admin April 23 05 18:07]

  Hello

  It is possible that there is a problem of electronic power supply. If the power supply microcontroller detects an error lamp DC IN sends a code flashing (8-bit error code). Can you please check it if the led blinks 8 times sending the code?

  You can try to contact the Service partner, explain the problem and I'm sure they can give you a clear explanation.

• Satellite C650D - battery charging problem

  After unloading when I plug it in to the charger. With the exception of the computer laptop direct charge battery start work on feeding until I take the battery, then after 5 seconds when I start to charge the battery, then it plugin.

  In short to load I have to take out the battery once and then it starts to load. Why is it?
  It poses problem for me.
  Help out me

  Hello

  Check if you can update the BIOS.
  I read somewhere in the forum that the update of the BIOS solved some problems of dough
  One of my friends had a problem where the battery was not recognized by the system and could not pay correctly update the BIOS helped

• Satellite L775 - battery charging problem

  I just bought a Satellite L775-15 q. She seems to have a problem with the load. Even though the windows icon indicator displays "Recharge" after half an hour the percentage is 0% and windows indicator IS NOT this bar battery fill effect.

  IT IS THE FIRST TIME I LOAD. I GOT TO UNPACK IT AND MORE IT IN.
  That s according to the manual
  Am I missing something?

  Pls HELP...

  Hello

  Is everything is OK with your laptop now?
  As I can see your ad is a few days old. What did you do in the meantime?

  Please post comments.

• Satellite A200 battery charge problem

  Hello, I have a Satellite A200 - 23 k in June
  3 days ago the battery stops loading at 65%
  I leave the battery to 0 (to recalibrate it) but surprise, this time stops at 45%
  I put the battery on a second laptop (same model) but it works the same way

  Any help will be apprechiated
  THX

  Hello

  It looks like a malfunction of the battery. What do you think?

  If the battery issue also appears on the second laptop using the same battery then I would try a new battery.

  It could really be a malfunction of the battery
  It s worth a try

• Satellite A660 - battery not charging

  Hi all, I'm new. Before all sorry for my English, im from the Russia.

  Here's the problem:
  I bought Satellite A660 from about a month ago and now does not work without? harging thread! This morning was OK, but there is 20 minutes, I detect this problem! When I pull the wire out of his turn off laptop!
  Don't lights Windows seven has stated that its indicator of battery "98%, is not load" is also

  What is the problem?

  Hi AtlantiB,

  And what happens if turn off your laptop and connect the AC/DC adapter? You see that the battery is charging?

  Sometimes, if the battery is absolutely empty, it might take several hours until it s full charge and it takes a few minutes until it will be charged of specifications.

  Then, turn off your laptop and connect the AC adapter. Then, wait an hour and check what is happening.

• Satellite A660 - BIOS update problem

  Hello

  I have a Satellite A660 and my battery won't load... it sticks to 0% and when I unplug the power cord, the computer shuts down. After many computers restart and do not finally understood what the problem was. The problem was my BIOS which is Version 1.20.

  When I try to install the BIOS, I always get these three mistakes:
  BIOS version plus 2.00
  Battery capacity over 20%
  AC is attached

  Thanks for your replies.

  Since when do you have this laptop and since when you have this problem of load?

  When you start your laptop without battery and put the battery in place when the OS is fully charged is recognized correctly battery? Start load or the problem persists?

• Satellite P200-1EE: charger problem after replacing the AC adapter / CC

  After changing my AC power (the old one didn't work anymore) I have problems with the battery charging circuit.
  When the adapter is plugged in and the laptop is turned off, it charges the battery OK.

  If I turn it on it will charge the battery until it is fully charged, the light will be then turns blue for a few seconds and then turns off.
  The battery will then race down until it is completely empty, even if the power adapter is showing as connected.
  Once the battery is fully discharged cell breaks down. Once off, it will start to load again.

  Someone at - it ideas to help me please.

  Hello!

  A friend of mine had a similar problem with its Satellite laptop. He bought a not Toshiba AC adapter and the battery could not be loaded.
  After that, he bought an adapter AC from Toshiba and everything works now.

  On the Toshiba site, you can search for compatible adapters:
  http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PC

  Good bye

• Satellite A660 - 1 HL-problems with the graphics card

  Hello!

  This is my first thread so I apologize if I am doing something wrong and for my bad English. :)

  Just bought a Toshiba Satellite A660 - 1 hl with two adapters, integrated and a GeForce GT 330 M. The integrated works well, but when I go to the dedicated I encounter problems. The non-adjustable resolution in optimal mode and windows in the operating system (windows 7) delays when moving. I can't get info on the map in all kinds of temperature programs or dxdiag and such others.

  I tried to install the drivers from nvidia, Toshiba and windows update with no improvement. I can't run Windows expreince index because I get an error message or of any average games do I encounter error messages there as well. I begin to doubt that the drivers installed even.

  I hope you guys can help out me :)

  It comes to getting the error messages:

  http://ImageShack.us/photo/my-images...krmklippe.jpg/

  http://ImageShack.us/photo/my-images...krmklipp2.jpg/

  http://ImageShack.us/photo/my-images...krmklipp3.jpg/

  http://ImageShack.us/photo/my-images/9/skrmklipp4.jpg/

  You should test the RAM (memory) for problems using the Test of memory of Microsoft or the www.memtest.org (bootable CD).

  To confirm that this is a hardware problem, you must save your documents and run recovery.

  If the problem still occur on a new image, then the laptop should go to an ASP (Toshiba Service Center) for repairs (possibly a motherboard replacement).

• Satellite A660 - battery discharge per day in shutdown/Hibernate implementation

  I presented my Satellite A660 for troubleshooting, after that months of testing a battery discharged 5% / day in hibernation (4 + % / closing day). When the battery is removed from the laptop, there is no noticeable effluent. The discharge when the battery is inserted is much higher than a previous laptop I've owned, but Toshiba says it's normal.

  I was wondering if I could ask people for what they found to be normal (compared to what they have found to be problematic).
  Thanks for the stories.

  On this forum, you will find number of threads with the same theme.
  Have you tried to find some of them and read the comments using the advanced search option?

• Satellite A660 Factory Restore problems

  I have a Satellite A660 Ref. PSAW3A-14V062 delivered pre-installed with Win 7 not provided, but a hidden partition with disk recovery files.

  Decided to do a restore to factory from scratch but ends of disk errors. Removed the HD and connected to another computer.

  Using Acronis Disk Director, I copied the hidden partition (HDDRECOVERY) to another drive and then formatted the drive and copied the partition hidden in it and reinstalled to the laptop.
  Downloaded an ISO image and tried to install it from DVD but received the message that windows cannot be installed on the HARD disk that the drive is about to fail.

  Bought new HARD drive and copied the partition hidden for her.
  I then tried to install from the DVD, but kept getting errors about unable to find files, after ISO more several downloads and burn 5 different DVD the furthest I got was the screen where it is "files", this remains at 0% and nothing else.

  I then tried a factory restore using the "hold 0 during startup", but when I took out the key pressed 0 when the Toshiba start screen showed that nothing happened.

  There was a small Partition 'System' on the original HARD drive I have has not copied. I have a few questions.

  (1) the "System" partition did not the files needed to start the factory restore and if so is there anywhere I can download these files?

  (2) probably a topic for another thread, but no clue as to why I have so many problems with ISO files.

  Cheers and sorry for the long-winded explanation.

  The installation of any recovery is quite complicated. It is designed to avoid a kind of manipulation so original recovery image can be installed either using recovery DVDs or HARD disk recovery facility which must be created with Toshiba recovery disc creator tool.

  To be honest, the whole story is complicated enough, but what confuses me, is
  > Decided to do a restore to factory from scratch but ends of disk errors
  If I understand you right, you have created a drive recovery, right? What exactly happens?
  You can use this drive with new HARD drive?

  This method with files recovery to cope with the new HARD drive does not work. You will not be able to access and begin HARD recovery disk image installation.

  If you have a new HDD only how to install the original Toshiba recovery image is to use the recovery DVD disc.

• Battery charging problem

  My iPhone 5s has recently had a charging problem. Got off the phone with about 18% battery life left but when I plugged in to a charger it came back to life and showed 18%. However, with the charger plugged in now never charged iPhone or it does so very slowly. He fell to 16% and stayed there for about 2 hours. Eventually, he started to decline while still connected to the charger until it was empty and closed. I then connected on two different Chargers and he wouldn't return. I left him in charge all night and he was still dead in the morning.

  I had subsequently replace the battery and the charge was 34%. I decided to run low before the additional load as it was a new battery and better empty before recharging. However, the loading has become incredibly slow. I managed to load of 5% to 30% in a few hours, and then he stayed on 30% for 2 hours while I backed up things on my Mac and iCloud. I then continued the charge during the night and in the space of 10 hours, that she went from 30% to 95%.

  Why so slow taxation? I use an Apple USB with a new battery. My software is updated to January 27, 2016. Could there be a problem with the loading port, event, although she acknowledges the Chargers whenever they are connected.

  Hi Denzel_26,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPhone. Looks like you've been on the right track in your troubleshooting. If you are still having problems charging the battery of your iPhone, you can check the troubleshooting steps described in the following article, up to and including contacting Apple Support if necessary:

  If you are unable to load your iPhone, iPad or iPod touch - Apple supports

  Concerning

• kernel_task and temperature of close to battery charger problem

  Hello

  I have a Macbook Pro 13 "2011 with El Capitan (10.11.1) start installed.

  Some time ago I started to have problems with the device. KernelTask would go up to several hundred or even thousands would rise percent utilization of the CPU and fans. It seems to be a workaround, as described here:

  948 http://forums.macrumors.com/threads/How-to-solve-kernel_task-High-CPU-usage.1706.

  I quote from this thread:

  ' 1. go about this mac under the Apple in the top left and then click more information.

  2. click on the system report

  3. take note of what he said after the model identifier

  4. go in your master drive - system - library-Extensions - IOPlatformPluginFamily.kext - table of contents - Plugins - ACPI_SMC_PlatformPlugin.kext - content - resources - find the name in step 3 and move it to a folder that you can find again if needed.

  3. reboot and you're done.

  I did this and the Macbook is still usable. But the fans are very high, the majority of the time and it's always a bit slow.

  I used a program to see the temperatures, the sensors detect. Everything seems normal except "proximity to battery charger": 127 ° C!

  Anyone know what this means and what we can do about it?

  Consider the possibility of a conflict of third party software.  You can get an idea of what is running on your computer via EtreCheck.

• X120e Battery Charge problem

  Hello

  I bought my x120e about a month ago and it's been great since, but recently I had problems with the battery. When I charge the battery to 100% and then unplug the power adapter, the battery is fine for an hour or two, and load will decrease to a normal and regular rhythm (indicated by the percentage). However, when the battery is at 75-80%, then he jumps abruptly up to 10%, and I get a message that I have to charge the cell phone or turn it off. When I connect and start loading again, the battery charges at a normal speed of about 10 to 40%, but the same thing happens and it jumps up to 100%, saying it is fully charged. Generally, I would be happy with such a fast charge, but in this case the battery is not really full as soon, he dies suddenly after that I have unplug the adapter. Even if I let it continue loading at 100%, the same thing happens.

  So, I was wondering if I could do something to fix this on my own, or if I should send it just come back on the one year warranty. Please tell me if I did not know by describing the problem and thanks for any help/suggestions!

  I just wanted to post an update. I thought that my explanation of my problem of battery gave a negative perception of the ThinkPad x120e and lenovo in general, but I called the customer service of lenovo today and after 15 minutes, the representative has verified the problem (battery was indeed defective) and sent a new battery in my house. Overall, I am very satisfied, and I think that this problem of battery was only an isolated case. The battery is supposed to come in 2 days!

• Replicator port and battery charge problems

  Model name 250410U Description ThinkPad Advanced Mini Dock with U.S./Canada/LA cord

  Above is the name of the model and description of my docking station for my new T500. I recently had the T500 during his first trip of the road since the purchase. On my return, I discovered two things:

  1. the T500 will not start when I connect to the docking station and then turn it on. It does not even try to access the HD. It sits right on the Welcome screen. If I push the blue ThinkVantage button, nothing happens. However, if I leave the T500 to start so that undocked, then place it on the docking station, it works fine with one exception...

  2. my battery does not load while on the docking station, but will charge when connected via its own power supply. I tried to do the reset of battery meter, but it did not do anything.

  Have I not the wrong dock? The seller assured me it was compatible. If it is not the right one, you know that I need?

  Thanks for the help.

  Your question on reproducing the restart got me thinking to see also if the battery charge always not moored. He wouldn't. I removed the battery and clean the son with the air canned and put it back into the laptop. It started to load immediately while not anchored. When I rooted the laptop, continuous load. I then re-tested the ability to start then only docked and was able to reproduce successfully.

  Thanks for the help. Sorry, that was just some kind of anomaly that I attributed by mistake to the docking station.