Report Builder by using ms word

Similar Questions

• How to create the new Custom XML report without the use of the form builder

  Hello
  
  What are the steps to create the new Custom XML report without using the Report Builder?
  
  Thank you and best regards,
  Aerts

  Aerts,
  Can you clarify your question more away!

  -bifacts
  http://www.obinotes.com

• Can I use the Report Builder freely in a commercial project?

  Can I use the Report Builder freely in a commercial project?
  If this is not the case, can what kind of clearance I get?

  N ° you need a reports developer license which is part of Developer Suite. And you need a license for the deployment of your reporting environment.

• Report Builder is not not as forms of fusion middleware & installation reports

  Dear all,
  
  I installed oracle fusion middleware forms & services ofm_frmrpts_win_11.1.2.1.0_64_disk1_1of1 report.
  
  generator of form is there, but the Report Builder is not there? Why? where is the generator of reports?
  
  Kind regards.

  Hi Maahjoor,

  Try from Report Builder using the rwbuilder.bat in the directory % ORACLE_INSTANCE%\config\reports\bin\.

  If you still have questions to
  (a) save the file rwbuilder.bat to %ORACLE_INSTANCE%\config\reports\bin\
  (b) now change file rwbuilder.bat the file % ORACLE_HOME%\bin\rwbuilder.bat, by manually hard code the correct paths for:

  $$Instance.directory$$\config\reports\bin\reports.bat
  $$Instance.oracle_home$$\bin\rwbuilder.exe

  In other words, if your instance is C:\Oracle\Middleware\as_inst1, then change the rwbuilder.bat to take into account:
  C:\Oracle\Middleware\as_inst1\config\reports\bin\reports.bat
  C:\Oracle\Middleware\as_inst1\bin\rwbuilder.exe

  (c) and then re-run the file updated the rwbuilder.bat to the % ORACLE_INSTANCE%\config\reports\bin\.

  If it still does not work...
  Follow these metalink 2 ID, they will be useful

  * REP-50125 "rwbuilder.conf:java.lang.NullPointerException" try to Open Report Builder [Article ID 1532120.1] *.

  * 11g on MS Windows error generator with: REP-50125 [Article ID 1059638.1] *.

  Concerning
  Fabian

• Report Builder 1.0 will not connect to the data source for Reporting SERVICES

  We have a few users who are unable to connect to SSRS on SQL Server 2008 using the Report Builder version 1.0

  (We will be updating soon, but it's a slow process, and now users have questions)

  Instead of disputed for their IDs, they are requested to select a data source.  This information is supposed to be filled automatically when the user starts the Reporting SERVICES report designer.

  Does anyone know where/how SSRS communicates information to start the application with one click Report Builder, and where, if anywhere, it stores?

  Hello

  The following forum seems most appropriate for your question:

  https://social.msdn.Microsoft.com/forums/en-us/home?Forum=sqlreportingservices

  You can get a faster response there.

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• How do I exit my a plain text, column 2 'page' of the CF Report Builder 10?

  FIRST

  I have a cover page in the Report Builder 10, report header and the size is 11 x 8.5.

  The footer contains labels for the display of the name of the company, all rights..., straight copy..., report name, and date.

  I would like to show it, so I know it will work. The cfoutput tag works only on queries... so is there a CF method to display "header and footer"?

  This experience contains a file with the request .cfm and .cfr files, using Crimson I see the file (test1.cfm)

  test1.cfm:

  SELECT

  tblStateProvince.State, tblStateProvince.Name, tblFacility.Name such as FName, tblFacility.City, tblFacility.PostalCode, tblFacility.Address,

  tblFacility.OID, ContractNumber, ContractEffectiveDate

  Of	tblFacility INNER JOIN tblStateProvince ON tblFacility.OIDStateProvince = tblStateProvince.OID
  WHERE	(((tblFacility.OID) = 37667));

  Here is where I tried to assign the string to the "labeling" of the report header.

  tblFacility.Name = "Yosemite Valley, LLC"

  TReportStaticText104 = ' #tblFacility.Name # '.

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------

  SECOND

  tblFacility.OID = "#tblFacility.OID #Session.» (initially, I had this in the query, but the "Builder objected (SEE 10 runs this query).") Why is - what the "builder" can't solve this assignment?)

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------

  THIRD

  
  

  In (CFeclipse - Browser View) test works except that it displays the query... so that means if there is no field/tblFacility.Name data referred to on my first page, I can't load the label... Right?

  The 'controls' are not something I can program?

  Do not ColdFusion syntax include in the text of the query in the query designer.

  The error message said you that MS Access does not recognize the text of your query.

  Note that the example code I posted must be entirely contained in one. CFM file.

  See you soon

  Eddie

• Report will run in Report Builder, but hangs in the report server

  Hello

  I am using Oracle 10 g reports to build a report containing many formulas. Everything worked perfectly until I added a condition in a query in the columns of the formulas. After adding it, report to the report server does not work but runs only in Report Builder. If I deleted this condition, report works OK but I need. This condition is very simple, just filtering is a decoded column (i.e. stts = has ')

  Can anyone suggest how to fix this?

  Hello

  What version of application server that you are using your reports?

  If you use PDF subsetting (check the [PDF:Subset] section in the file uifont.ali on your server), then you most likely face to Bug: 5029259 this is 10.1.2.0.2 to 10.1.2.2. To solve the problem read more Doc ID 363868.1 in support of the Oracle. In short, your options are:

  1 apply a group of hotfixes 10.1.2.3 or perhaps the patch 5029259 is sufficient.

  2-make sure that no NULL values are returned in the report. Use nvl when possible. If there was no problem before making the changes then maybe check new columns formulas would be sufficient. I made this change me to this problem and it seems that this is resolved the problem.

  3 or change to no. REPORTS_ENHANCED_SUBSET in the registry under windows or $ORACLE_HOME/bin/reports.sh if windows under linux.  REPORTS_ENHANCED_SUBSET = YES is necessary if you use TTF which create subsets, however. So maybe it's not an option.

  Julius Z

• Reduced to adjust text - ColdFusion Report Builder

  In ColdFusion Report Builder, is there a way to reduce the text to fit a particular sector? (as opposed to the stretch with overflow)

  Any help would be greatly appreciated!

  -Chris

  I found another solution that works relatively well.  I have added several fields to a field on the report with each of these areas on the report by using a different font size.  For each of these areas, I applied printing conditions to evaluate the text as an image width (in pixels).  Based on the width of the image, the correct field with the font size is used, and all the text is in a specific area.  The result is the desired effect.

  For example, if the width of the text as an image is 383,73 pixels, the printing condition where the font size is 26 is used.

  Width of the text in Pixels
  Greater than or equal to	Less than or equal to	Font size
  0.00	374.99	28
  375.00	399.99	26
  400.00	429.99	24
  430.00	469,99	22
  470.00	509.99	20
  510.00	579.99	18

• Is there anyway to see the sql code generated in Report Builder?

  I'm debugging a custom report complex which includes many variables bind and lexicals and uses several user_exits for flex collect field values. Is there anyway to see the SQL code that is actually generated in the report - that is, a type of log file?
  
  Version of the EBS is 11.5.10.2
  Report Builder 6i

  Assuming that all of the lexical settings are in your before and after triggers setting, why not add a message pop up in your setting after trigger to display what is used? Ex:

  If: P_input1 = 'A' then
  : P_where1: =' and x = 2 ";"
  on the other
  : P_where1: =' and x = 3';
  end if;

  -make the last statement in your setting after release:
  SRW.message (1, "SQL: select a, b, c from table1 where b = 5' |: P_where1");

• CF Report Builder field do not stretch with overflow

  I use CF Report Builder Version 144677 on CF 7.0.2 and have a large SQL Server text field that needs to stretch. If I stretch the height of page layout for the field to a higher value, it works, but then of course I get a bunch of whitespace if the value of the field is smaller. I tried a variety of property settings and moved the field in the report header, the detail and the foot of the sections, but were unsuccessful. Guess "Stretch with overflow" layout of the property set to True should have done, but it's not. I have modified the properties of layout and treatment thus including the definition of type of post float and fixed, but nothing is. I also tried different conversions on the field type itself to see if it didn't matter, once again, no help. As a side note, I am able to do subreports to stretch. Suggestions would be appreciated.
  
  He also noted, is not much help with the help system. Embedded help does nothing.

  Another developer on my team sent me a report that worked and I noticed that I had put the print order horizontally when I was trying to solve another problem. Changed back to vertical and it works very well. Not sure why it was important, but it works.

• Input parameters of Report Builder

  I need to create a report using the input parameters and a date range. I called the report in a form that uses the following query and gets his entry to a previous form:
  
  < cfquery name = "getVisitors" datasource = "zipcodesearch" >
  SELECT company.CompanyID, company.CompanyName, company.phone1, visitors.visitorName, visitors.visitorComp, visitors.createDate, visitors.phone, visitors.email
  The COMPANY INNER JOIN visitors ON company.CompanyID = visitors.companyID
  WHERE visitors.createDate > = #form.startdate # and visitors.createDate < = #form.enddate #.
  ORDER BY company.CompanyName, company.phone1, visitors.createDate
  < / cfquery >
  
  At this point, I'm not sure if I should use cfreportparam tags or not. The reason is, I'm not using the = operator. I need to specify a range of dates, and I can't find an example ANYWHERE on how to achieve this with the report generator. If I use the cf report param tags, they would present something like that? :
  
  "< cfreport format ="PDF"template ="visitors.cfr"query =" #getVisitors # "overwrite ="yes">
  < cfreportparam NAME = "startdate" VALUE = "#form.startdate #" >
  < cfreportparam NAME = "enddate" VALUE = "#form.enddate #" >
  < / cfreport >
  
  Guess my next question is, should I I then specify a query in Report Builder and also use input parameters in report designer environment? the documentation on this type of scenario was virtually nonexistent.
  
  I'm really stuck on this one, and any help would be appreciated...

  I thought about it and answer my own post in case anyone else runs into the same type of situation...

  The formula of entry consists of two fields: StartDate and EndDate

  The action page consists of a query as follows:
  
  

  
  SELECT company.CompanyID, company.CompanyName, company.phone1, visitors.visitorName, visitors.visitorComp, visitors.createDate, visitors.phone, visitors.email
  The COMPANY INNER JOIN visitors ON company.CompanyID = visitors.companyID
  WHERE visitors.createDate > = #FROMDATE # and visitors.createDate<>
  ORDER BY company.CompanyName, company.phone1, visitors.createDate
  

  .. .and the code generator of report:
  
  

  No record date (s) selected.
  

  Close the window
  
  
  
  
  
  

  Also, I removed the underlying query in the report generator program and am only using the query on the page of ColdFusion itself. Everything seems to work properly, so I'll put this down as the answer.

• Installation of Report Builder

  Hello
  
  I want to install the Report Builder, but I don't have ColdFusion on my machine, it is installed on a server that I access through a network, actually several. I write ColdFusion pages in Dreamweaver and then simply save them in a folder that I make and test them. I built a tool reports by hand and everything with some success (thanks in large part to this forum of dev)., it takes a long time. I'd like to try this tool, but I don't know that it will not install with CF on my machine. So my question is: can I install a local version of CF on my machine to install and run the reports generator tool, or will who screw things, or even does not work because the server must be said to read the special label? I am sure that we are running MX 7, but with so many servers, I'm not even sure who administers the (s) that I use, and if they want to even try, with all the paperwork to go through. Any thoughts would be appreciated.
  
  Thank you
  Steve

  No,

  When you have created your report in the development, you can just download the .cfr resulting production.
  Report Builder is for the development environment and the .cfr is all that is necessary for the runtime environment (assuming that corresponding to your data sources).

• How to publish a report created by the Oracle Report Builder

  Hello world
  
  My colleague and I have tried to use the Oracle Report Builder to replace our existing report builder of our ERP system. We have already created the report in Report Builder from the suite of development.
  
  What we are looking for is a similar solution such as Microsoft reporting services;
  (1) create models of corporate report
  (2) and then download the template files to a location (for example, the folder on the server)
  (3) then all users in the company can access it through a web browser with a few fields which they can enter certain critiria (e.g. order number).
  (4) then send it to the printer and print out must stand exactly as the model.
  
  
  Unfortunately, we had very hard time trying to find out what it takes and how to publish this report in Oracle we have created. We spent 15 hours on it, but no results.
  
  15 hours we tried to install the 'Oracle' service, but finally, my colleague said that it was not what we are looking for you, "report Oracle service" is used to the error of the hosted application on the server, not to publish the report of company created by the "Oracle report bulider.
  
  
  We use Oracle Database 10 g for the LES quite a long time already. We had setup the Oracle Developer and the installed Application Server.
  
  Could someone tell us please what kind of service Oracle we are looking actually. Other guides any suggestion and installation are also the most welcoming.
  
  
  Best regards
  Bryan

  Hello

  If you want to be able to run your reports on the web, the best solution is to use the 'Oracle Application Server'

  http://www.Oracle.com/technology/software/products/IAS/htdocs/101202.html

  For example, the stand-alone edition of 'forms and reports Services '.

  Then, use the reports Servlet to submit applications for running a report server:

  http://download-UK.Oracle.com/docs/CD/B14099_17/bi.1012/b14048/pbr_run.htm
  Application server Oracle® reports Services publishing reports to the Web
  10g Release 2 (10.1.2)
  B14048-02

  13 queries in race report

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/HOWTO/runPrint/deploy_rpt.htm
  Deploy a report

  Concerning

• Report Builder 6i do not recognize the analytical functions

  Hi all, in an attempt to speed up a slow query, I applied the analytical function to it. I can save the query in the generator without any problem, however, I can't create data between this request and other links. After I have comment on the analytical function, data bindings can be made. My colleague says Report Builder 6i is too old so he can recognize only the ANSI SQL syntax. Since our server DB uses Oracle 10 g 2, is there a way for the generator of reports to identify and compile syntax of Oracle 10 g?
  
  Thank you very much.

  Hello

  Your colleague is right. Even if the SQL query is executed by the DB server, reports must analyze the SQL query.

  The SQL parser included in reports 6i-based 8.0.6

  You can see this version using the report designer:

  Menu: Help-> on Report Builder...

  ORACLE Server Release 8.0.6.0.0

  Concerning

• The Report Builder 3 - How can I sort indicators

  I flag indicators - I want to have all the red on top - yellow in the middle and green at the bottom.

  How can I do this

  Contact support for Report Builder.