Report will run in Report Builder, but hangs in the report server

Similar Questions

• HP HM-219: laptop starts but hangs at the Compac logo screen

  Laptop starts but hangs at the Compac logo screen. It is not even make to the Windows startup screen. I have to stop it, remove the battery, reinsert the battery & it starts perfectly. This should be done whenever I want to use. When I do this it still takes a while to fully fill the start up & get online. For months, it takes a long time to shut down when Im done with it. I ran the disk check, but it stops nearly 80 percent by the 4th scan process. I have Windows 7 Home Edition

  Hi there @akanyr,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your notebook is suspended to the Logo of Compaq screen.

  If the computer hangs at the Compaq logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down. I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  EU the link below to download the ISO of Windows Vista. It's totally free.
  The site is Digital River. It is 100% legitimate. It is recognized and supported by Microsoft.

  The link also teach you how to burn the iso file on a bootable install DVD.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-Vista-official-ISO-download-links-Digital-River.aspx

  Although it says Dell at the top of the page, it applies to both Dell or other than Dell.

  Make sure that you select the correct version of bit.

  x 86 32-bit version =

  x 64 = 64-bit version.

• How can I download my email in mail and keep it in mail but remove it the optimal server?

  How can I download my email in mail and keep it in mail but remove it the optimal server?

  Select the e-mail messages of interest, and move messages to a folder on your Mac, Apple Mail.app calls these files 'mailboxes.    You can get to move through the menus (Messages > go) or you can alternate click on the selected messages and select move here.   You can create local folders (mailboxes) on your Mac (sub "on my Mac") according to the needs, and you can create so-called smart ball that allow you to have an easy way to save the searches that you use often, too.

• Forms work well in 10 of Forms Builder but not in the OAS 10 G

  Hello
  
  My forms work well in Forms Builder (Developer Suite 10 G), but not in the OAS 10 G release 2.
  
  I installed OAS 10 G release 2 on CentOS (infrastructure services + forms and reports).
  
  I started the application with
  http://172.19.3.200:7778/forms/frmservlet? config = asdfg
  
  Form of Star ok but does not run any command.
  
  For example, I put a simple command to trigger a TIME NEW FORM INSTANCE
  message ('ABC');
  
  
  Nothing happened and no error in the form.
  
  I can't check any log file?
  
  Please any suggestion
  Thank you

  My forms work well in Forms Builder (Developer Suite 10 G), but not in the OAS 10 G release 2.

  I installed OAS 10 G release 2 on CentOS (infrastructure services + forms & reports).

  Developer Suite is installed on a Windows computer? If Yes, then 2 questions:

  1. how to transfer your forms for CentOS?

  2. don't you recompile forms on CentOS?

• My Spry Accordion will not work in IE but goes to the opera

  Hello world

  I'm having a problem with my Accordion widget spry in a website I'm trying. Keep in mind theres a lot of things to fix, but it is in its infancy. What happens is, if you go under the heading, business and training, then you will see a FAQ section. You will notice that the tabs are open and it does everything just not correctly in IE, Chrome and Firefos but it works in Chrome. (I've not tried in Safari as my computer crashes?) I have included the link and the code below.

  Thank you

  Steve

  www.adelxt.NET

  Code:

  < name meta = "keywords" content = "computer, consulting, Director, windows, 2000, 2003, 2008, XP, Vista, Sonicwall, Novell, Netware, Virus, New Hampshire, Massachusetts, North, wireless, cabling, South, firewall" / >
  < name meta = "description" content = "a local consulting company specializing in Windows Server and Novell Netware as firewalls. This company helps out and installed networks, wiredd and wireless and keep your network. "/ >
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml">".
  < style type = "text/css" >
  <!--
  .twoColElsLtHdr #container #mainContent p {}
  }
  {.style2}
  color: #FFFFFF;
  height: 30px;
  }
  ->
  < / style >

  < link href = "SpryAssets/SpryMenuBarHorizontal.css" rel = "stylesheet" type = "text/css" / > "
  < style type = "text/css" >
  <!--
  a: link {}
  text-decoration: none;
  }
  a: visited {}
  text-decoration: none;
  }
  a: active {}
  text-decoration: none;
  }
  {body
  background-image: url(graphics/a1.gif);
  background-repeat: repeat-x;
  background-color: #f9f9f7;
  }
  {#apDiv1}
  position: absolute;
  left: 538px;
  top: 131px;
  Width: 185px;
  height: 444px;
  z-index: 1;
  }
  body, td, th {}
  Color: #000000;
  Police-family: Geneva, Arial, Helvetica, without serif.
  do-size: 12px;
  }
  {.style4}
  do-size: 18px
  }
  {.style5}
  Color: #FF0000;
  make-weight: bold;
  }
  ->
  < / style >
  < script src = "SpryAssets/SpryAccordion.js" type = "text/javascript" > < / script > "
  < link href = "SpryAssets/SpryAccordion.css" rel = "stylesheet" type = "text/css" / > "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > welcome to the computer company Adel-Xt < /title >
  < link href = 'css files/main.css' rel = "stylesheet" type = "text/css" / >
  <!-[if IE] >
  < style type = "text/css" >
  / * place patches css for all versions of Internet Explorer in this conditional comment * /.
  .twoColElsLtHdr #sidebar1 {padding-top: 30px ;}}
  .twoColElsLtHdr #mainContent {zoom: 1; padding-top: 15px ;}}
  / * the owner above zoom gives IE the hasLayout property, avoid several bugs * /.
  < / style >
  <! [endif]-->
  < script src = "SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script > "
  < link href = "SpryAssets/SpryMenuBarVertical.css" rel = "stylesheet" type = "text/css" / > "

  < script type = "text/javascript" >

  var _gaq = _gaq. [];
  _gaq.push (['_setAccount ',' UA-18563317-1 ""]);
  _gaq.push (['_trackPageview ']);

  (function() {}
  GA var = document.createElement ('script'); GA.type = ' text/javascript '; GA. Async = true;
  ga.src = ("https:" == document.location.protocol? ) https://SSL ' : ' http://www ( ') + «.google-analytics.com/ga.js ";
  var s = document.getElementsByTagName ('script') [0]; ParentNode.InsertBefore (ga, s);
  })();

  < /script >

  
  < / head >

  < body class = "twoColElsLtHdr" >
  < div id = "container" >
  < div id = "header" >
  < table width = "100%" border = "0" align = "center" >
  < b >
  < th bgcolor = "#FF6633" scope = "col" > < div align = "left" >
  < p align = "center" class = "style2 style4" > Adel - Xt Computer Company < /p >
  < p align = "center" class = "style2 style4" > Derry, NH 03038 < /p >
  < p align = "center" class = 'style2 style4' > 1-603-434-5311 < /p >
  < / div > < /th >
  < scope = "col" th > < h1 >
  < div align = "center" > the House of formation for the individual < / div >
  < / h1 > < /th >
  < /tr >
  < /table >
  <!-end #header--> < / div >
  
  <! - beginning of Horizontal menu Bar - >
  < div id = "horizontalmenu" >
  <!-#include file = "files/Horizontalmenubar.ssi ISS" - >
  < / div >
  <!-end of Menu bar-> horizontal
  <! - beginning of the right sidebar - >
  < div id = "sidebarright" >
  < h2 align = "center" > training FAQ < / h2 >
  < div id = "Accordion1" class = "Accordion" tabindex = "0" >
  < div class = "AccordionPanel" >
  < div class = "AccordionPanelTab" > Steve has never taught in school? < / div >
  < div class = "AccordionPanelContent" > Yes. Steve has taught several computer, math, and engineering vlasses in local colleges. < / div >
  < / div >
  < div class = "AccordionPanel" >
  < div class = "AccordionPanelTab" > what is the history of Steve? < / div >
  < div class = "AccordionPanelContent" >
  < p > Steve has a BSME in mechanical engineering, master's degree in Business Administration (MBA), advanced concentration in decision-support systems (DSS) and Microsoft certification. < /p >
  < p > Steve is also 18 years working in the industry in the field of technology of Information (IT), engineering (software & amp; (Mechanical), manufacturing, engineering, management, quality, manufacturing, and much more... < /p >
  < / div >
  < / div >
  < div class = "AccordionPanel" >
  < div class = "AccordionPanelTab" > what is the maximum I can get in a clasroom. < / div >
  < div class = "AccordionPanelContent" > it's up to you. Steve will discuss this with you and point out the advantages and disadvantages of having too many students in a session. < / div >
  < / div >
  < div class = "AccordionPanel" >
  < div class = "AccordionPanelTab" > Will Steve training night? < / div >
  < div class = "AccordionPanelContent" > for special occasions, it will be. Evening training normally is done with a few reviews for Steve. < / div >
  < / div >
  < div class = "AccordionPanel" >
  < div class = "AccordionPanelTab" > does Steve have a program < / div >
  < div class = "AccordionPanelContent" > No. that's exactly what he doesn't want. Steve wants to customize training to your company. An important part of the training is planning which is what he will discuss with you. < / div >
  < / div >
  < / div >
  < p > < / p >
  < p > < / p >
  < / div >
  < div id = "mainContent" >
  Training of < h2 > < / h2 >
  < div > Adel-Xt computer will create a training program for you and your employees. We will be in gear
  the training program for your company then used following this class will become more efficient in their daily work skills. Times
  a program is approved we will send you our instructor (Steve) to your facilities to teach to the class. < / div >
  < div > < / div >
  < Div > please call 434-5311
  "or < a href ="mailto:[email protected]"target ="_self"> contact us < /a > for more information on how Adel-Xt computer can help your business become more efficient, which leads to bigger profits." < / div >
  < p > < br / >
  < /p >
  < p >
  <!-end #mainContent->
  < /p >
  < / div >
  < p >
  <!-this element of compensation should immediately follow the #mainContent div in order to force the #container div to contain all the child-> fleet
  < /p >
  < div id = "subcontent2" align = "center" >
  < H2 > sound are some examples of training < / h2 >
  < class p 'style4' = > beginner training for people new to computers. < /p >
  < class p 'style4' = > Excel 2003, 2007, 2010 < /p >
  < class p "style4" = > Word 2003, 2007, 2010 < /p >
  < class p 'style4' = > Email use and precautions < /p >
  < class p = "style4" >... < /p >
  < p > < / p >
  < / div >
  
  < / div >
  < p > < br class = 'clearfloat' / >
  < /p >
  < div id = "footer" >
  "< table width ="100% "border =" 0 ">"
  < b >
  < scope = "col" th > < class p = "style5" > we are currently redesigning our Web site. "If a link does not please contact us via < a href ="mailto:[email protected] "> e-mail < /a> or call us at the 603.434.5311." < /p >
  < p > Adel-Xt Computer Company, Derry, NH 03038 1-603-434-5311 contact us < /p >
  < p > update:
  <!-#BeginDate format: fcAm1a-> Friday, November 5, 2010 17:29 <!-#EndDate->
  < /p > < /th >
  < /tr >
  < /table >
  "< a href ="http://www.tinycounter.com"target ="_blank"title ="web counter"> < img border ="0"alt ="web counter"src ="http://mycounter.tinycounter.com/index.php?user=adelxt "> < / has>
  <!-end #footer--> < / div >

  
  <!-end #container--> < / div >
  < script type = "text/javascript" >
  <!--
  var MenuBar2 = new Spry.Widget.MenuBar ("MenuBar2", {imgDown: "SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});})
  var Accordion1 = new Spry.Widget.Accordion ("Accordion1");

  ->
  < /script >
  < / html >

  < / body >

  You are not using the latest Spry files

  The latest version of the Adobe Spry 1.6.1 Framework it is the same version that ships with Dreamweaver CS4. If you are using Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can be easily done by using Updater Spry who can be found here.

  If you replace

  you will notice that it works as it should.

• My HP officejet pro 8500 has more - will print from my laptop, but not by the desk top

  It prints my laptop downstairs, but not from the Office superior or smart phone. There is a Wi - Fi connection.  I tried the diagnostic tests and does not issue?

  When was the last time the devices were power cycled?

  I recommend an oil change of the full power of the system:

  Unplug the router when turned on

  * Wait 30 seconds

  * Connect Router and wait for it to reboot completely

  * Reboot the computer after the powers of the router to the top

  Unplug the printer when turned on

  Disconnect the other end of the power cord from the wall outlet

  * Wait 30 seconds

  * Plug the printer back to

  Try to print now that everything has been updated.  If the unit still does not print, then get the IP address of the printer.  This can be achieved in the Setup Menu > wireless Menu.  Check the IP address which seeks the printing software.

  * Click Start menu on PC

  * Select all programs

  * Select the HP folder

  * Select the folder for the HP Officejet Pro 8500 a A910 series

  * Select update the IP address

  Also check the information contained in the document located here.  Let me know how it goes.

• Running an ADF base application fails on the remote server run. Running locally on Jdeveloper 12.1.3 works very well

  I'm deploying an ear with two war files file. One of the web applications in this EAR file acts as a basic authentication web application. I am able to do basic http very well, but when the welcome.jsf try to load, this error occurs:

  ADF_FACES-30200: for more information, see the error log of the server for an entry beginning with: The UIViewRoot is null. Fatal error during PhaseId: RESTORE_VIEW 1.

  Additional detail

  java.lang.NoClassDefFoundError: oracle, adf, model, RegionBinding at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.getLifecycleContext(ADFPhaseListener.java:175) to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ PhaseInvokerImpl.dispatchAfterPagePhaseEvent (ADFPhaseListener.java:302) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:88) at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:489) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593) to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:280) to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:254) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79) at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105) to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79) to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:137) at java.security.AccessController.doPrivileged (Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:194)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3436)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3402)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)

  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)

  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:255)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)

  Caused by: java.lang.ClassNotFoundException: oracle.adf.model.RegionBinding

  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:357)

  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:318)

  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:80)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:425)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:358)

  at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:186)

  at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:50)

  ... more than 49

  This problem does not occur on my installation local jdeveloper (12.1.3)

  Deploy the application to a 12 c Enterprise development environment manager, and there is only one target server.

  Have you checked that the target server has the right adf 12.1.3 installed on?

  The error normally means that the runtime is missing.

  Timo

• Website will run on Windows Mobile, but not air iPad

  I am accessing a site of learning of the Red Cross.  When on a Windows machine, I get a page that says "content open in a new window" and a message below says "allow once" or "always allow this Web site.  I answer that question and still very good.  However, when trying to get to my class of learning within the site, when I'm on my Ipad Air, it just seems to hang up.  I see the page 'Content open in a new window' but nothing else and there is no way to continue.  Does anyone know how I can get past this please?

  Not every site is optimized for the iOS or mobile devices - if possible use "m" instead of www as m.redcross.org instead of www.redcross.org and check

  You can also try with another browser if you wish

• Clone of SSD will not appear at startup, but present in the startup disk

  OS X 10.11.3 El Capitan

  iMac (27-inch, late 2012)

  2.9 15

  32 GB of Ram

  My machine came with a standard 1 TB hard drive. I recently bought a PNY 960 GB SSD CS1000. and a USB to SATA adapter from Ebay.

  First of all, I cloned with the CCC. Then tried to use disk utility to see if that was the problem. Both have the same results.

  The cloning process was successful in both cases. It displays not only at boot time. I start my imac. Press the Option key and the new drive does not appear as a boot option. To make sure that its not only meet its time but never watch? After the starting of the machine. I go into the Preferences system-startup disk and performances as an option. I unlock a tell the machine to reboot using this disc. And it will restart, but still does not use the SSD.

  I did score as GUI and logged and followed all the relevant instructions. It seems fitting that at startup it find until after the start.

  Any ideas on what is happening. I want to be sure that it will boot from USB until I open my machine and install it as a replacement. Thank you

  Strange indeed. Looks like you've done everything right, but something does not play well. My first suspect is the USB-SATA Adapter, I do not trust any of the cheap knockoff sold on eBay. What happens if you clear and just install a new copy of El Capitan on the SSD instead of a clone? It will then start?

• How will I know if I'm connected to the Adobe server?

  I use the creative cloud and need to know how do I know if I'm connected to the Adobe server

  Please check if such aid:

  Solve common problems of activation and deactivation of creative cloud.

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Concerning

  Stéphane

• Click directly on the pdf File and my Java application will run

  Hello everyone I have an app a java application which read pdf of the file and display
  the pdf of the dossier on a jPanel, but I look forward how it works because before I can open and read
  PDF file I have to click the intersted and open the jfilebrowser for my java application will open and read the pdf file.
  
  I want that I automatically click any pdf file on my computer with my java application is running and my app will run automatically and will be one who has read the PDF if I double click on any file pdf on my computer.
  
  any idea about this problem? PLSS help. I know this is possible because there is so much software that works like this.
  and I also know that this forum is the best and the center of all java developers.
  
  This is cross-posted from
  http://www.javaprogrammingforums.com/Java-theory-questions/8803-directly-click-PDF-file-my-Java-application-will-run.html
  and
  http://www.thenewboston.com/forum/viewtopic.php?f=119 & t = 10698
  
  I just want to get more information, because my problem is not resolved.

  Click on the PDF File, and my Java application will run

  Java Web Start can implement the file associations for an application. See the file service. demo for more details.

• Is it possible to run two iMovie 11 and 10 on the same iMac?

  I have an older 24 "iMac with iMovie 11 and quite a few projects and movies finished.  I want to know if I update to iMovie 10 I'll be able to jump back between the two applications. Or will10 override 11?

  foxrock321

  "I can jump back between two apps"

  Yes, you do.  When you install 10 iMovie, iMovie 11 will be placed in its own folder in the Applications folder and will still be usable.  When you launch iMovie 10 it will you update your projects and events from iMovie 9.  (You don't have to do it immediately and can do so at a later date).  iMovie 10 will create a library package that will be used by iMovie 10 the entire edition.  Records of events and projects iMovie 11 will remain and can still be used with iMovie 11.

  Of course all changes in a future version will not appear in the other, they will work on various issues, but gives you the opportunity to try iMovie 10 before committing to use iMovie 10.  It is best not to transfer projects that are in the middle of editing between versions as you can find that there are a few problems.  iMovie 10 is very different from earlier versions, so there is a bit of a learning curve.

  Note: Avoid updating your operating system on El Capitan, until you came to iMovie 10 as earlier versions have problems running under El Capitan.

  Geoff.

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Several Agents running on the same server ODI

  Is it possible to run several ODI Scheduler Agents simultaneously on the same server?
  As provide us the name of the repository work in file params ODI and if we have different reference works
  and we want to run schedular agent on the same server, how can point us the other custodian of the work.
  We need to create another installation of files of the ODI agent on the same server?
  
  Thank you
  Kashi

  Hey Kashi.
  You don't have to install a separate files of the Agent again. What you need to do is to make sure that each game agent has all the required parameter files that included, the odiparams.bat, the agentstart.bat and the agentstop.bat (names can not be exactly the same). Here is a site that gives you more details on creating multiple agents on the same server
  http://www.business-intelligence-quotient.com/?tag=ODI-agents

  Kind regards
  k