report of checkbox using APEX_APPLICATION. G_F01 does not

Similar Questions

• In numbers, I can't use then "/" operator to divide 2 cell, when I use may 7 does not appear "/", appear.

  In numbers, I can't use then ' / ' operator to divide 2 cell, when I use Shft + 7 does not appear "/", appear ' + '.

  Apple saw fit to replace the ' / ' with the Obelus ("÷") that often resembles a plus.  Look very carefully and you will see the point above and below the line.

  Also if you look at the result, 6/3 is 2 step 8 if the operator acted as the addition operator

• Serial cable using IrDA protocol does not work correctly. Steve Stephens, * address email is removed from the privacy *.

  The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.

  Appreciate any suggestions on how to solve this problem.

  Steve Stephens, * address email is removed from the privacy *.

  Hi, Steve Stephens.

  Did you run the fixit available in the link below?
  Hardware devices do not work or are not detected in Windows

  Method 1: Check for any error message in Device Manager

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Device Manager, find your device, and then double-click the device name.

  (d) If an error code has been generated, the code appears in the status area of the device under the general tab

  
  Method 2: download and install all available Windows Update

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 3: Download and install SP2

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• If I buy a used PC that does not have an operating system or OS disc, still has the label of license for windows can download Microsoft windows?

  If I buy a used PC that does not have an operating system or OS disc, still has the label of license for windows can download Microsoft windows?

  N ° you must contact the manufacturer of the computer and asking for a disc of recovery/reinstallation of Windows. Carey Frisch

• report interactive apex 5, pivot action does not display columns in the application developed on 4.2.6

  I just installed apex 5.01 on apex 4.2.6.

  When I want to use the pivot of the action on an interactive report developed on 4.2.6 the names of the columns does not appear.

  If I add a new column, it seems

  calculated columns displayed

  Thank you

  Hello

  The pivot must be enabled for these columns.  To do this, you can upgrade the application developed in 4.2.6 as follows:

  -Click on the application

  -Click utilities

  -Click on the Application upgrade

  -Activate the IR Pivot should appear.  Click on the number of candidate object

  -You can select some or all of the IRs to upgrade

  Kind regards

  Christina

• Use of excel2collection does not

  Hey everybody,
  
  I am trying to download a file in format XLS with APEX; I use the earpiece of the Apex and following the steps I've seen in blogs like that of Spendolini (http://spendolini.blogspot.com.es/2010/02/uploading-xls-files-with-apex-listener.html) and in this forum (https://kr.forums.oracle.com/forums/thread.jspa?threadID=2342792). However, it seems that I get no information in the collection, because I get a message "No data found" after downloading the excel.
  
  I try to check the info from the collection in 3 ways: in debug mode, from the SQL commands (select * from apex_collections) and with a report on the same page where the file browser. In these 3 ways, the result is the same: no data found.
  
  I checked that the demand for the 'Upload' button is "xls2collection", and the lines added in the apex_config.xml are the following:
  

  <entry key="apex.excel2collection">true</entry>
  <entry key="apex.excel2collection.onecollection">false</entry>

  No matter where these lines are added?
  
  I use APEX 4.1.1. I'd appreciate any help on this.
  
  Thank you
  Elena.

  Hey Elena,

  I am trying to download a file in format XLS with APEX

  What version of Excel depends on your file? Note that APEX listener currently can only handle versions prior to 2003.

  I checked that the demand for the 'Upload' button is "xls2collection".

  Do you have other actions on this page? And what is the target of your item to browse file? (Must be WWV_FLOW_FILES )

  No matter where these lines are added?

  They should be in the ++ tag that surrounds the other entries. Despite this, the order does not question, although I got them only after the other entries.
  Have you restarted APEX listener after you have added these entries?

  Could you put the listener APEX out of the newspaper for the attempt to download?

  -Udo

• Script using AppleScript GUI does not

  Before we go too complicated, I'm starting to get a basic copy/paste using keyboard shortcuts to work. In theory, if I can copy a value of cells in another cell using keyboard shortcuts, I can use keyboard shortcuts, I need more complex scripts.

  Can someone more well informed that I look over the below basic code and tell me what I'm doing wrong?

  (I added the script editor to the security settings for accessibility to allow him to control the computer.)

  My code for a simple copy/paste in figures (other programs also not to answer):

  on run

  say application "Numbers".

  activate

  if not (there are document 1) then error number 1000

  say document 1

  tell the worksheet active

  the value the selectedtable to (the first table whose class of selection range is range)

  the value myRows to count the lines in selectedtable

  say selectedtable

  the value the selection range of cell 2 of rank 3

  sendCopy

  the value the selection range of cell 4 of rank 3

  sendPaste

  end say

  end say

  end say

  end say

  end run

  
  

  on sendCopy()

  say application 'Numbers' to Activate

  say application "System events".

  say application process "Numbers".

  key sequence « C »

  end say

  e nd dire

  end sendCopy

  
  

  on sendPaste()

  say application 'Numbers' to Activate

  say application "System events".

  say application process "Numbers".

  key sequence « V »

  end say

  end say

  end sendPaste

  Thank you

  Jason

  You favorite the AppleScript Language Guideand then use the appropriate syntax:

  key sequence Using 'C' command down

  
  

  key sequence 'V' with the command down

  
  

  It may or may not be other contributory factors in your script as to why it does not work.
  

• using the do does not track will be my lojack still be able to find my location if stolen pc

  I followed by avg if pc is stollen by using the do not follow foxfire will be I have problems with avg to find my pc if stollen

  Hello Kime34759,

  Please contact the Mozilla Support. I'm not familiar with the Lojack of AVG software, but in looking at the site here , their tracking software is at the level of the bios and does not track of browser use.

  For more information please visit the site of the products mentioned above.

  See you soon,.
  Patrick

• Tecra A7: After using Record now does not close properly

  Hello

  I have a problem with recordnow software on my new laptop Tecra A7. It does not close after that I have to burn a CD/DVD (recordnow.exe still appears in the Task Manager). It closes correctly when I open only and nothing is burned. The main problem is that I can't access my DVD - RAM drive until the recordnow.exe is closed by the Manager tasks. I tried to reinstall the recordnow software but it does not solve the problem.

  I hope that someone will help.
  Thank you

  Hello

  Thanks a lot for the power supply to the back. This problem is unknown and tells you some very useful information.

  Thanks again!

• write a graph in a cluster using a refnum does not?

  Hi all

  A little bit of a weird (I think). I'm trying to update a table that is in a cluster using a refnum.

  See the attached example, Boolean updates correctly, but not the graph (above). Y at - it something I'm doing wrong or can graphics simply can't be updated in this way?

  With the help of LV 8.6 in Win XP (SP3).

  Ideas?

  PNR

  It does not work. You must remove the reference for the cluster chart and update it in this way. See attached mod.

• In test report says wireless network wireless radio does not (8500 a909g)

  I can't get my HP Officejet Pro 8500 Wireless put A909g in place on the network. I have the correct network name, security type, and the security key, but it does not detect the printer. I ran a test on the printer's wireless network and, at the top of the page, it says "the wireless radio does not work... '.

  What can I do?

  Try to reset the printer by pulling on the plug and waiting for 30-40 seconds.  If that is fixed, contact HP for repair or replacement.  Prepare to spend hours with them on the phone.  Keep your handy wireless network test.  Also run a printer status report.  You need both.

• My Windows Media Player does not open upward when you click it in the list of available programs, nor will any media over the internet using Windows Media does not work

  My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.

  Hello

  You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:
  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wmp.dll

• Windows Fax & scan using Outlook 2007 does not display do not all contacts

  This can be a matter of Office 2007. I use Windows Fax Scan & and Outlook 2007. I can't choose a recipient in Outlook 2007 Contacts correctly use in Windows Fax & Scan. When I click the To: button in Windows Fax & Scan I have only three columns displayed. Name, full name, and e-mail address.  If the recipient does not have an e-mail address, his name does not appear. Who am I put in wrong place? I don't see an option in Windows Fax & Scan. What is an Outlook setting? Any help would be appreciated.

  From: Hal Hostetler

  This is probably due to sync Palm/BB and/or the / import export, email addresses don't always 'solve' prevents them underscores when used in address lists.  One thing to note for the future is to NEVER use Outlook. PST, import and export functions, they are broken and have been, they lose data and the. PST Import feature usually corrupts the Outlook profile in use at the time.  Instead, just make a copy of the current value, by default. PST file when Outlook is closed, take this copy to your new computer, place it in a folder where it will NOT overwrite any existing... PST files, make sure it is not set to read only (which will happen if you use a CD for transfer, then open of in Outlook using ' file |) Open | Outlook data file. " Do drag what you should leave the default copy on your new machine, or set as the default value and continue to use it.

  About 900 contacts, see if this clever utility can help with that:

  http://www.Chapura.com/downloads_utilities.php

  E-mail address utility

  Another response of the community of Windows Vista discussion groups

• Reinstalled vista now the modem does not work, says the modem is already in use. Modem does not appear in the material...

  Vista Basic with dial-up. I reinstalled vista and now the modem will not work with any of the numbers given by my provider. He throws error numbers (Sorry didn't write them) and said that the modem is already current usage or other computer is busy. The modem does not appear in the lists of material and reinstallation does not work. The computer does not recognize when a new modem is installed either. I use the same drivers provided with the computer when I got it.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

  It will be useful.

• OBIEE 11 g: odd error in report ORA-00942: table or view does not exist

  Hi gurus,

  I get the following error if I pull one or more columns in a table of facts

  Error details

  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle error code: 942, message: ORA-00942: table or view does not exist to the call of the OCIStmtExecute OIC. [nQSError: 17010] Prepare the SQL statement failed. (HY000)

  SQL published: SELECT 0 s_0, 'XXXXXX '. "" "" Fact_FCT_REG_XXXXXXX_XXXXXX '. "" S_1 N_ACCT_BALANCE""XXXXXX"FETCH FIRST 4000001 LINES ONLY
  

  Is the weird part, when I take the physical sql and run it against the same user account. It is fetching result. He also works in a different environment, but throwing error in our test environment, both environments are well established for a long time to return, and many projects are developed by many different groups.

  I really need expertise help to break this question. Given that I do not get no idea why his mistake to throw into the application layer?

  Any help will be much appreciated.

  Thanks in advance

  Concerning

  Nathalie

  Save nqquery.log which connection pool is used to send the query to the DB. Then check the configuration of the Connection Pool to see what user credentials are used to connect to the database, to which database (DSN), and if the table owner prefix is added to the SQL.

  ORA-00942 can often be due to the existing table, but the user trying to access him confer no rights. Rather than say 'no permission', Oracle will say 'does not exist.