Requirement of min for a laptop for planning 11.1.2.3

Similar Questions

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

  Hello

  I am a complete newbie at this forum and came looking for help. I recently bought an Equium A200 laptop computer with Vista preinstalled.

  Lately when I start the computer and log in to Windows, I get a message that windows requires a driver for an unknown device and ask for permission to connect to the internet to find the driver concerned. When I click on this option, I get a message saying that the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP adapter".

  What is it and why should we need for installation? I thought it was quite strange. Any ideas people?

  Any help will be much appreciated.
  J.Sutton

  Hello

  I searched a bit in the Microsoft Knowledge base and discovered that this symptom appears on computers running Windows Vista.

  http://support.Microsoft.com/kb/932520

  Microsoft recommends that ignore this error message. This error message does not indicate a problem with the adapter, computer or any other device. The adapter will continue to function correctly.

  Here are more details;
  + Microsoft ISATAP what inter Site Automatic Tunneling Address Protocol device is used to help the transition to an IPv6 infrastructure companies. Map ISATAP encapsulates IPv6 packets with an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure. +

  Concerning

• BlackBerry Smartphones, opera mini for storm without BIS...

  Hi guys,.
  I'm trying to download opera mini for my storm (9500), I do not have BIS plan, I had normal gprs data plan, when I try to download opera browser BB it downloads, after that it gives me an error will be installed, when I tried to download from the site of the opera, it shows all the models except the storm BlackBerry , which version should I download & where? pls help guys,
  Thank you...

  OK guys got it works finally but not happy with the performance, so finally requested the plan vodafone BIS mods may lock this thread.
  Thank you...

• I'm trying to download the Kies mini for my samsung captivate phone s galaxy

  I'm trying to download the Kies mini for my samsung captivate phone s galaxy on the samsung website. I tried to install it and it keeps telling me there was an error, "error:-1603 Fatal error during installation." consult Msi.chm or MSDN' I treid again and another error occurred during the process, and I found myself with the same result. Any help? I am running windowns 7 via a computer pc laptop hp g42 - 41 5dx. email is * address email is removed from the privacy * Thank YOU!

  Hi Robin,

  The issue is described in this article:

  http://support.Microsoft.com/kb/834484

  Have you tried to change the installation during the installation folder?

  Kind regards

  Joel

• Problem loading data for Planning Server through ODI

  Hi all
  
  I am facing problem while loading data for Planning Server through ODI.
  I created the interface with flat as a source of data as file below
  
  Location data load Cube name POV cost per seat
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk1, Local 333
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk2, Local 444
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk3, 555 Local
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk4, Local 666
  Budget, Working_2010, FY10, Wk5, Tidel Equifax, Local 777 Ctbn_PnL
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk6, Local 888
  Budget, Working_2010, FY10, Wk1, PADI Ctbn_PnL Equifax, Local 222
  Budget, Working_2010, FY10, Wk2, PADI Ctbn_PnL Equifax, Local 111
  Budget, Working_2010, FY10, Wk3, PADI Ctbn_PnL Equifax, room 345
  Budget, Working_2010, FY10, Wk4, PADI Ctbn_PnL Equifax, Local 346
  Budget, Working_2010, FY10, Wk5, PADI Ctbn_PnL Equifax, Local 347
  Budget, Working_2010, FY10, Wk6, PADI Ctbn_PnL Equifax, Local 349
  
  And the target as an application of Planinng. Interface has been properly executed, but are not filled with data in the form of Plannning or Essbase.
  I obtained the information in the log file after running the interface:
  
  2010-05-20 18:45:38, 409 [DwgCmdExecutionThread:null:5] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
  2010-05-20 18:45:38, 409 INFO [DwgCmdExecutionThread:null:5]: connection for application [PnL_ODI] [chnveltss03]: [11333] using [admin] username.
  2010-05-20 18:45:39, 800 [DwgCmdExecutionThread:null:5] INFO: successfully connected to the planning application.
  2010-05-20 18:45:39, 800 INFO [DwgCmdExecutionThread:null:5]: loading for the charge of planning options
  Name of the dimension: location like Parent child: false
  Order By entry charge: forgery
  Update the database: true
  2010-05-20 18:45:39, 815 INFO [DwgCmdExecutionThread:null:5]: beginning of the loading process.
  2010-05-20 18:45:39, 815 DEBUG [DwgCmdExecutionThread:null:5]: number of columns in the result set of source does not match the number of columns planning targets.
  2010-05-20 18:45:39, 831 [DwgCmdExecutionThread:null:5] INFO: type of load is a [member of the load dimension].
  2010-05-20 18:45:39, 831 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 831 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 878 [DwgCmdExecutionThread:null:5] ERROR: Record [[null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 878 [DwgCmdExecutionThread:null:5] INFO: planing cube refresh initiated.
  2010-05-20 18:45:44, 284 INFO [DwgCmdExecutionThread:null:5]: planning of the cube refresh operation completed successfully.
  2010-05-20 18:45:44, 284 INFO [DwgCmdExecutionThread:null:5]: load the process is complete.
  
  
  Please help me in this grace,
  Srinivas

  You are right. The table that you have described is in the format 'Generation' (the highest to the lowest level of the hierarchy). The KM of planning requires data to load in format "Parent/child". You must create multiple interfaces (one for each pair of generation) or use a view to make the transformation.

  While a view seems to be the easier choice, note that ODI will not be able to perform any analysis of lineage of data on the integration process.

  Hope this helps,
  Matt

• How can I check my Mac mini for spyware and other viruses

  How can I check my Mac mini for software spyware and other forms of virus? Recently, I received an electronic invoice which seems to come from Apple on a purchase that I did not. Unfortunately, I answered by clicking on a link that asked me to cancel or manage this purchase that led me to a site that didn't look like an official Apple site. I am afraid that simply by doing so, I welcomed the spyware on my Mac mini hard drive.

  My Mac was purchased in 2011 and runs on OS X El Capitan (version 10.11.6).

  Kind regards

  Politkovskaya

  Receive a fraudulent e-mail for a purchase confirmation, you did not is a very common scam. Remember that you are not misled by providing personal information solicited by this e-mail.

  Unfortunately, I answered by clicking on a link that asked me to cancel or manage this purchase that led me to a site that didn't look like an official Apple site. I am afraid that simply by doing so, I welcomed the spyware on my Mac mini hard drive.

  No harm will come of the fact that you wrote. Fraudulent Web sites that are made to appear as legitimate those who are specially designed to convince you to reveal personal information. If you don't have that, no further action is necessary or justified. Do not install anything, no matter the source or the apparent popularity, in response to one such scam. To do this would be the first step in a path well worn to the misery.

  On the other hand, if you were tricked into providing personal information (like your Apple ID and password) you will need to change your password on Apple ID. Please write back for instructions.

• How to find the value max and min for each column in a table 2d?

  How to find the value max and min for each column in a table 2d?

  For example, in the table max/min for the first three columns would be 45/23, 14/10, 80/67.

  Thank you

  Chuck,

  With color on your bars, you should have enough experience to understand this.

  You're a loop in the table already.  Now you just need a function like table Max and min. loop.  And you may need to transpose the table 2D.

• When I open Task Scheduler and click on MSE for planning, I get the following warning. General Page initializatin has no 0 x 80070534

  Original title: Task Scheduler

  When I open Task Scheduler and click on MSE for planning, I get the following warning.

  General Initializatin page failed,

  The specific error is:

  0 x 80070534: no mapping between account names and security IDS was done. Year error has occurred trying to retrieve task account informaiton. You can continue to edit the subject of the task, but will not be able to change task account information.

  I then press the ok button and it goes to the task, schedule, and the settings box.

  When I check in scheduled tasks, to see if they ran as planned, the last run time column NEVER said, and the status column indicates

  COULD NOT START.

  In the morning, I always get this error message:

  A task could not run...

  Do you know what I'm doing wrong? Can it be fixed?

  Thank you Tim

  Is there a password the user account in which the task is scheduled?  You cannot schedule a task to run under a user without password account.

  You can also take a look at advanced > view the log window scheduled tasks.

• Password blackBerry Smartphones does not satisfy the requirements of duration for this problem domain in the creation of BlackBerry ID

  I am developer form India. Im trying to create my BlackBerry ID of the past 5 days. Each time that its giving me same error

  Password does not meet the requirements of length for this field. I'm really frustrated.can anyone solve this problem?

  Thank you

  Ok. Let's start with: how many characters you use the password?

  I don't remember the minimum number of characters in the password, it might be six, but why not try using a password with 6, I know full well that work of 8 characters.

• Requirement of CA for EAP - TLS

  Hi all

  I know there is a requirement of Cisco for "User certificates" and "AAA certificates" used in EAP - TLS. Anyone know what are the requirements for the cetificates CA in EAP - TLS please?

  Thank you.

  Hello

  You must have 2 certificates on the client and your radius server.

  First certificate is the "root" Cert which is the same on both devices.

  The second certificate is the 'user' Cert that is unique for each client-server and aaa.

  Below are more details for EAP - TLS:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_white_paper0918...

  Kind regards.

• A bit of luck with ASO for planning

  Hello

  Has anyone tried using ASO for planning?  A little luck?  I don't know it's a of bugs.  Just trying to find out if I should waste time test.

  Thank you.

  Dear Fan of SEEP, the ASO with planning works perfectly well. Yes! You are right there are some know issues when ASO is to help with the planning. Planning cannot create the security on ASO filter. If you use ASO to build the HFR report. Security will not work, but there are workarounds. You should be fine.

• FDMEE: Perform metadata cube refresh for planning?

  Hello

  Fairly new for Hyperion & FDMEE so hoping someone can point me in the right direction. We use FDMEE (11.1.2.3.500) to integrate the E - Business Suite and Hyperion Planning.

  We got the standard EBS--> load Hyperion Planning running through FDMEE, but I noticed that the load of metadata does not refresh the cube. If load us the metadata with a new Dimension value (for example a new GL cost center in EBS) then try a load balances data, new cost center is rejected during the loading of data as being invalid. Found the list of "Known issues" in the manual and...

  =====

  Known issues:

  16571720 metadata support does not have the automatic update cube for planning

  =====

  Certainly, that is the question that I hit: if I perform a manual refresh cube (from the screens) after the metadata load then load data works ok. But we want to program "overnight", so a manual step is not ideal. So my question is...

  There that technical work around we can implement to perform a cube/automatic refresh under the load of metadata?

  Pointers appreciated.

  Thank you!

  Hello

  You can create a package definition and the calendar.

  Batch you should run first rule of metadata, then a custom script (assigned in "After the command Script") to refresh the cube.

  You must create the custom script to refresh the Cube of planning.

  To do this, you can run the custom script CubeRefresh utility planning:

  Oracle Hyperion Planning, Fusion Edition Administration Guide

  Hope that helps.

• ERRORS AFTER UNINSTALLING ALL of the cs5.5:Exit Code: 7 - Summary - 1 fatal Error (s), 3 (s), 6 warnings WARNING: DW065: display the requirements not met for {60E59A6C-7399 - 495 A - B8}

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 3 (s), 6 warnings

  WARNING: DW065: display the requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}

  WARNING: DW065: display the requirements not met for {23767F5D-A80C-4264-B8EA-ED4085FC332A}

  WARNING: DW065: display the requirements not met for {DDBDE7B0-6FC4-40B1-B673-66EEE8CB60CF}

  WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} has been updated and has been selected for repair. The {42774483-D33C-46F7-8B20-FD0B1A3DAC25} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now.

  WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The {A189C479-C7CD-4E08-8CCF-D999B68C0C71} patch camera profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 are uninstalled now.

  WARNING: DW031: payload: Photoshop Camera Raw 6.0.0.0 {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} has been updated and has been selected for repair. The {FD58D99B-9927-4226-8E00-959A4F76BD89} patch Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 are uninstalled now.

  ERROR: DW020: found payload conflicts and mistakes:

  ERROR: DW020:-Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX must be installed.

  ERROR: DW020:-Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin must be installed.

  FATAL: DW020: conflicts were found in the selected payloads. Stop the installation.

  -------------------------------------------------------------------------------------

  What to do now?

  end of message.

  Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

• I have Photoshop CS5 installed on my old Mac Mini for seven years.  I bought a new Mac Mini - there is no crack of the disc.  Download CS5 creative cloud?

  I have Photoshop CS5 installed on my old Mac Mini for seven years.  I bought a new Mac Mini - there is no crack of the disc.  I've never used the creative cloud.  Just download CS5 creative cloud using my serial number?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".