Reserved Vlan ID in Cisco UCS

Similar Questions

• How does them VLANS in Cisco UCS

  Hi guys,.

  I wanted to help better understand the notion VLANS in Cisco UCS.

  I ask this because even if we create a VLAN in UCSM but where can I define which port should apply this VLAN?

  Is it possible that this can be done by using the user interface or api XML?

  Thank you

  Hello

  All the VLANS created will be assigned to the uplink ports. There is no option to have on the same fabric of interconnection of VLANs on an uplink and other VLANs on another. As on the side of the blade, you choose what VLAN is assigned to a blade when you create the vNIC.

  Kind regards

  Bogdan

• Configuring the Cisco UCS 5108 ports

  Hi all

  I'm new in the world of the Cisco UCS server and am setting up Cisco UCS 5108 blade server. The server has two Cisco UCS 6324 interconnections fabric I did the initial Setup on and I try to configure the ports for the blades. Looking through the various articles and tutorials after setting global policies, I see the whole world establishment of uplink and server ports. What I read the uplink ports are plugged directly into the switches (I work with two cisco nexus switches), and server ports are used to connect to the chassis.

  I wonder once the configured ports server what exactly are supposed to connect to? I assumed they would also connect to the switch nexus with the uplink ports. However, every time I set up the server ports and plug them in, the switch doesn't seem to have flooded and we lose all connectivity. If I unplug, the connection is restored almost immediately.

  The current configuration, that I work with is two ports uplink on each fabric interconnect (4 2 total in each switch of nexus), two server ports on each (4 2 total, in every nexus switch). The only other element connected to the nexus switches is a SAINT who will be configured as a boot and storage of the UCS 5108.

  Looks like you have a Mini UCS (6324), with 4-port 10 GB (each FI/IOM) with port QSFP 40 GB that can provide network connectivity linking rising, or if configured as a server port, could be used to connect to a server in a rack compatible Cisco UCS, or connect to a 5108 additional with IOM 2204XP chassis.  The blades installed in your initial 5108 chassis 6324 FI/IOM of housing have internal connectivity to the FIs / IOM without the need to configure ports 'server'...

  Please take a look at some of the visuals in the datasheet below.

  http://www.Cisco.com/c/en/us/products/collateral/servers-unified-computing/UCS-6300-series-fabric-interconnects/datasheet-C78-732207.html

  Unified ports can also be configured as a FC ports for connectivity of FC switch upstream or directly related to CF Storage processors.

  After having watched the datasheet, let me know if you have any other questions, and I'll try to address them.

  You'll not need actually configure ports such as ports 'server' unless you connect servers in a rack.

  Please configure any ethernet SFP type connected to your switches nexus upstream as 'network' uplinks.  I guess that you don't plan on a disjoint config layer 2 (where each FI has several sets of uplinks will different devices upstream, or the same device with different VLANS allowed on each link).    If you are, we can have a separate thread about how you need to configure that.

  Thank you

  Kirk...

• vFoglight with Cisco UCS

  Hello all,.
  We are looking for Cisco UCS for our ESX env. and I was wondering if someone was running vFoglight UCS and had problems.
  Or if someone of Quest/Vizioncore knows of any problem or future integration planned with UCS.

  Thank you
  Craig Dieck

  Craig, I know of many clients running the Cisco USC with VMware and they are very happy. There is no known issue with vFoglight perspective. VFoglight hardware monitoring currently able to extract any platform SNMP information. If you are looking for a vFoglgith to pull information from the physical ESX servers directly (not SNMP) you will need to ask for a discussion of the roadmap with your representative local of the quest.

  Inform the product manager for the platform you are using and what you want to be monitored and displayed...

• Cisco UCS B200 M4Compatible with 2100 FEX in UCS 5108 chassis & FI 6100?

  Hello

  The blade server Cisco UCS B200 M4 is compatible with FEX 2100 within a Cisco UCS 5108 chassis & Cisco UCS 6100 fabric of interconnection?

  The interop tool said clearly for the B200-M4:

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  Note 14: The 2104XP fabric Extender is not compatible when the 1240 and 1280 or 1240 and VIC Port Expander are combined on the same blade. Applies to the M3 and M3 B200 as well as B420 B22 with 1240 and the 2 adapter connector populated

  or for the VIC 1340

  Note 38: 6100 series fabric interconnects and 2100 series fabric Extender is not supported

• Cisco UCS C210 M2: PXE - E61: Media test failure, check cable of

  Hello

  I'm working on Cisco UCS C210 M2 servers. I got 10 146 GB SAS HD with LSI MegaRAID Raid Controller. I did run the Raid Controller and choose RAID6. After that I installed ESXi and it said to reboot the server. Now, when I restart the server I get the following error message:

  PXE - E61: Media test failure, check cable of

  PXE - M0F: Exit Boradcom PXE ROM

  Restart, and then select proper boot service

  or Insert Boot Media in some boot device and press a key

  Any suggestions how I can solve this problem.

  Thank you.

  You will need to go into the Bios of the controller LSI MegaRaid (Ctrl + H) and select the option of virtual drives on the left. When the virtual command window opens, you must select the drive (Raid Volume) on which you want your drive master boot and underneath there will be an option to set as your boot device. Apply and save.

• Connection Cisco UCS 6120 FI directly to Cisco Catalyst 6500?

  I watch a lot of design with the Cisco UCS solution guide and everywhere it is Cisco Nexus 5000/7000 connects to the uplink ports of Cisco UCS 6120 FI with the benefits of technology to the vPC.

  How about connect Cisco UCS 6120 FI directly to 10GE ports in Cisco Catalyst 6500 (without VSS and VSS)? It is possible to design?

  If I use C6500VSS there will be port-channel of the aggregation of the UCS Nx10GE all the bandwidth?

  And what happens if I use C6500 (without VSS) - how it will be on the many links between UCS and two boxes C6500? It will be blocked by STP? A little on the other?

  Please explain to me, because we have only C6500 switches in our data center and want to test a Cisco UCS schassis.

  Yes, you can connect the 6120 s to cat6500s with or without vs. With VSS, you get a vPC as port channel where 2 links to a single 6120 can be connected to different 2 6500 s in a port LACP-channel.

  VSS is not necessary, you can connect a 10 G uplinks / 1 G of 1 or more of a 6120 at cat6500s. I you have 2 cat6500s (non - vss) and 2 uplinks by 6120, then you want to connect 1 cat6500-1 and the other to cat6500-2. I would recommend going ahead and creating a single port-channel port so that you can easily add the uplinks in the furture without interruption of service.

  Ideally, for non - vss, I would have 4 10 uplinks by 6120; 2 in a channel port cat6500-1 and 2 in a port in cat6500-2 channel

• Cisco ucs with VMware 5 auto deploy

  Hello

  In our lab, I test with 5 VMware and Cisco UCS. We run UCSM 2.0 (1 m). I am now to test the auto hand deploy. I have auto configuration to deploy in VMware and it works (first of all, I had some problems with DHCP on windows which is solved in version 2.0 of UCSM (q)). vSphere gets deployed to the blade. When the blade (vShpere) wants to connect to vCenter I get an error of vCenter has enough licesing for this action. I loaded a lot of low-income VMware. When I create a virtual machine, it starts perfectly and apears in vCenter.

  I search on the internet for people who have the problem of the simailer, but could not find.

  Some body the same problem our help me?

  Thanks in advance,

  Robin

  Robin,

  This looks more like a VC related question (UCS) platform.  UCS has no effect on the functionality of licenses of the VC.

  If the host does not connect to the CR, how are you VMs to "start perfectly and appear in vCenter?

  Kind regards

  Robert

• vSphere 5.1 on Cisco UCS

  Hello

  I just want to check is one have tried to install VMware vSphere 5.1 on Cisco UCS blades? I was fine that some items and come to know that if you want to install vSphere 5.1, you have to first upgrade the firmware 2.0 (4A or 4B), and only then you can install / upgrade the 5.1 vSphere

  If anyone has a sine qua non for the installation of vSphere 5.1 on B200M2 & B200M3 to share the same

  -Amit

  Hello Amit,

  The UCS SW/HW interoperability tool should answer your questions.  5.1 ESXi is supported of the UCS 2.0 (4) and later versions.  Install the OS, and then update the drivers enic & fnic from the ISO driver available on cisco.com

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  Matthew

• CISCO UCS C200 M2 amber display clear on mem and warning

  Hello

  My company bought 5 units of CISCO UCS C200 M2. The servers are equipped with 2 x 6 core 2.67 GHz. The server was also equipped with 32 GB of ram. One of the shows Server alert light yellow on mem and warning on the front panel. Can someone tell what could possibly cause this problem?

  Thank you

  Logan

  Hi Steve,.

  There could be a faulty MEMORY Strip on the system, in the MMIC, you can check the logs SALT (System event log) that will provide you with more details.

  I give advice you open a TAC case for this, we can take a look at the tech show and understand why accurate and if necessary replace the defective DIMM module / part (if defective).

  Thank you!

  . / Afonso

• How can Cisco ucs c220 m4 I start with 12g cisco sas controller? 2012 UEFI Server installation issues

  first time with cisco ucs c220 m4, check my photos

  You have a VD 11TB.

  Only way to start on this is by using UEFI.

  You need to activate UEFI in the boot order.

  Anything over 2 TB and more 4 K sector size readers require the UEFI boot option.

  BIOS will not process the VDs when manages UEFI.

  Kirk...

  Summary for those who seek a similar question:

  • Client a large VD created, 11TB
  • 2 TB and more, 4K sector drives, require boot UEFI + GPT, cannot use the legacy/MBR
  • To set startup to local HD option, that referenced the PCI-E Slot, the raid controller was in (HBA slot in this case)
  • UEFI mode, can't score a VD as "bootable disk / startup.
  • You will see not the VD/raid controller appear in the 'real' boot order during the OS install.
  • Once the installation of the OS compatible UEFI is made, it will create a UEFI boot to the operating system "Windows Boot Manager" entry in our case.
  • After the next reboot, if you check your boot order, you should see this UEFI OS boot manager entry.

• VNX 5300 file shared storage - connect to Cisco UCS 6200 interconnection fabric

  Hello

  I'm designing a calculation and Shared Storage solution to help

  • EMC VNX 5300 shared storage
    • Block
    • File - sharing two Data Mover with i/o 10GE ports
  • Cisco UCS Blade Server Platform
    • Interconnection of Cisco UCS 6248 fabric
    • Chassis Cisco UCS 5108

  I have a question about where the connection Data movers with i/o 10GE ports. I connected to the 6248 UCS Cisco fabric interconnections or connect them to the switch IP network?

  kind is ok.

• Dell TL4000 Tape Library on Cisco UCS 6120

  Hello

  We have Cisco UCS 5108 2 6120XP fabric of interconnection. We are running VMware on my Cisco blades. I have I need to connect my Dell TL 4000 LTO3 tape library this Cisco UCS so that I can configure a virtual machine with the EMC Networker software for backup of virtual machine data. When I connect the Cisco UCS library, it does not recoginize as tape drive.

  Please suggest how to set up the same.

  Thank you

  Amit,

  We do not support direct damage attach FC tape library to the FI currently.

  It may be a CF or CF storage end switch.

  . / Afonso

• How to move a stand-alone series C of Cisco UCS managed service profile without losing any data?

  Hello

  We currently have a stand-alone series cisco C with 2012 Windows Server installed on the local disks.  We need to go this Cisco UCS server managed with a service profile, but can not lose existing data and the method of operating system boot.

  Does anyone know how to do this?

  Thank you

  Hi Adrien,.

  To be able to accomplish this together the local drive to 'any Configuration' policy this way UCSM won't overwrite the current raid on the server configuration.

  See the link below

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config...

  Let me know if that helps

• Virtualization Cisco UCS in some software

  Hello community,

  I want to ask you a few tips. My question is: If there is some software that virtualizes Cisco UCS? Freeware is the best option. Reason why I ask is because I need to create the test environment for the follow-up. IBM followed agent KV6 for Cisco UCS, which connects via HTTP to UCS Manager.

  Thank you Jan

  Take a look at the UCS platform emulator. https://communities.Cisco.com/docs/doc-66688

  In my view, that it will respond to SNMP requests and api as the normal version.

  Thank you

  Kirk...