Reset buttons

Similar Questions

• where is the reset button in the troubleshooting information page?

  my firefox is the 42 version and there is no reset button on the troubleshooting information page.

  I searched Bronze help ads appearing on the lower left panel and found articles like this one: https://malwaretips.com/blogs/ads-by-bronze-aid-removal/

  However, I recommend after cleaning first of all the steps in my previous post.

• What to do if the reset button does not work on the Airport extreme a1408 w / Password lost?

  What to do if will not work the Reset button on Airport Extreme a1408? The password is lost (bought used). I spent several hours trying every method I could find anywhere on how to reset; soft, hard and default. Airport utility doesn't let me do anything without the previous owner password. I can't get him.

  Can anyone help?

  At this point, your only hope is to open the AirPort Extreme to try to repair the reset button... If possible. This link provides some tips on the process to open the unit.

  https://www.iFixit.com/device/Apple_Airport_Extreme_Model_A1408

  Honestly, it isn't easy, unless you're a guy real DIY, you can buy an A1408 used on Amazon for about $35-40.

• The reset button in Firefox for Android is missing!

  Cannot find the reset button using the subject: support > troubleshooting information page? Also can't open the Profile Manager?

  Reset does not exist for Firefox for Android.

  You must use the Android App Manager to erase stored data or uninstall and reinstall Firefox.

  This will eliminate completely all the settings of Firefox for Android, bookmarks, history, saved passwords, etc will all be deleted.

• [waterfox] Using a default profile. No reset button in the troubleshooting information page.

  QUESTION:

  Having a thousand bookmarks affect performance of firefox?

  An add-on would prevent the reset button to appear? (tried to disable (blocking, not the addon) probably guilty, edge of adblock, nothing) safe mode seems to 'disable' the page of troubleshooting for some reason any so couldn't really use that to test.

  I would have posted these but downstairs I noticed side issues tend to be ignored. or at least the way I say them gets ignored them, so here they are.

  As the title says.

  I use only one profile is the default (and not only her name, she is also defined as default value according to the profile.ini).

  According

  http://KB.mozillazine.org/Troubleshooting_Information_page#Reset_Firefox_to_its_default_state

  The only factor would prevent her to appear if I do not use the default profile, which is what I currently have, and it's the only profile I.

  So... what could be preventing it from appearing?

  I'm not on Windows and I am not familiar on what support Waterfox feature and what has been deleted, so you can be better contact Waterfox for support on the problems with the program.

  Of course, you can always use the Profile Manager and create a new profile if that's your only intention and manually copy files to the new profile folder.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How can I fix crashes of Firefox-26 Fedora-19/20. No CrashReporter, about: crashes MT, no apparent RESET button

  In particular to access the pages of Wikipedia (which is my test case) FF-26 Linux Fedora-19 & 20 accidents. No Crash Reporter will appear. Topic: crashes is MT no RESET button appears on the troubleshooting page.

  I did a cleaning and reinstall. FF - 26 still crashes in UNSAFE MODE.

  My work around to open Wikipedia in a separate window will break soon. I have not noticed problems in any another Wikimedia page.

  Thank you for your help. My problem has been marked as resolved.

• When I press Alt - T tools foor, then go into options and advanced there is no reset button to fix my toolbar problem... help!

  Try resetting your Internet Explorer settings by following the instructions below.

     Click the Internet Explorer Tools menu, or press Alt-T on your keyboard.
     Select Internet Options.
     On the Advanced tab, click Reset.
     Select the "Delete personal settings" checkbox.
     Click Reset.
     If you still don't see the Toolbar, try the steps above again to re-enable add-ons and the Toolbar.
  

  But there is no reset button! Help:)

  Clear the cache and cookies from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

• How to install Canon imageCLASS MF4700 on my IMAC? Yes, I did. But it shows inactive. Also, I couldn't see the reset button.

  How to install Canon imageCLASS MF4700 on my IMAC? Yes, I did. But it shows inactive. Also, I couldn't see the reset button.

  What signs it helps us when you let us know what version of Mac OS X is installed on the computer. Without that, you have to guess.

  I'm going to assume you have the most up-to-date version of Mac OS X installed (El Capitan 10.11.4), if so please follow the instructions of OS X El Capitan: Add or remove a printer -

• Pavilion a775c power/reset button?

  I have an old hp Pavilion tower which has a motherboard BioStar inside.

  The other night, I was doing something when the screen went black and the light on the power switch will Flash yellow.

  Run fans, that the monitor only stop blinking when connected to the video card. the fan on the card, so I guess that the card is good. As an additional check to ensure that the card is good; My son-in-law has hung the tower with its monitor, using its video card, still nothing.

  Take off the lid of the Tower, I noticed that there were only connectors on the power pins on the front panel to the motherboard.

  My thoughts on this is the person who has replaced the motherboard did not connect the pw switch correctly and when for some reason, the Commission went into hibernation, and given that nothing is connected the PIN; the motherboard will not be from hibernation.

  My question is very simple, I'm on the right track; and if I am how I connect the original power switch to pro

  empty power switch and reset.

  Thank you very much for your review

  Have a blessed day

  Bob

  (1) is the scenerio of what's not correct? NOT without doubt, as the reset button is rarely used and does not have the computer on low power such as the standby or hibernation States.

  (2) if so, how do I wire the original switch for the reset on the map or what type of switch would I need to do the reset works? Again, it is probably not the case and your problem is probably caused by something else. Please provide details about your problem... What happens when you hold the button in 10 seconds? The computer turns off? What happens if you briefly press the power button? What operating system is installed on the computer? What is plant HP or your technician installed? Etc.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Satellite A300-17N where is the reset button

  Hello

  I have laptop toshiba A300 17N but, I can't find the reset button on it? :) if anyone knows... Please help me...:)

  Thank you..

  Afraid to tell you, but you will not find any reset button, because there is only a power button. You will need to restart your laptop by using the windows or hold down the power button to turn it off completely and start it again.

  Maybe you could try the old combination of CTRL + ALT + DELETE to restart your system.

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• I would like to create a reset button

  I would like to create a reset button resetting a counter on my vi. I tried several methods, as seen in the forums, but my only last resets to 0, but as soon as the button is released the number that was displayed when the button has been selected can be seen in the meter box.

  As you can tell I am a very new newbie.

  Any help would be greatly appreciated!

  You're so close.  Wire the output to select your indicator.  Also wire this output to the cable directly above.  Remove the "short circuit".

  The shift register to the left should only go to the Select function.  The result of the Select must go where you put the wire from the registry to offset (the on the right add function).

• X 1 carbon starts more-also no reset button / open hole.

  Hello

  I recently bought a Thinkpad X 1 carbon (model number: 20A7CTO1WW - 2nd Gen?) and have been using it happily for a while. However, the screen now gives me only a mouse, the function keys seem to react, but I get no response or no matter what windows screen. I don't know how to restart, as the machine does not respond to either a Ctrl-alt-del or a 5 seconds press the power button (it is in a sort of Eve), as after power up, I get the same result (mobile mouse, but nothing else). With the HDMI connection I can project the same image on my TV screen, but no other results. Also, the touchscreen seems to react as mouspointer disappears when I touch the screen.

  Now, I read in another article that I should push the reset button, but I can't seem to find it on my model. The photos in the related article do not match, and the only thing that looks like a reset button hole is smaller than the thickness of a paper clip.

  Any help is appreciated as my daughter needs this computer for his exams next week.

  I am very disappointed by the Belgian technical support service. There is a choice of classic (LENGTHY) button sequence that disconnects you sometimes, you sometimes refers to a number that is no longer in service and sometimes to a number that works only in week 9-6. (No chance of a transfer, you must reconstruct the physically each time) I bought 3 years on the support of the site and cover against accidental damage, but these people seem to be inaccessible when you need it.

  Kind regards

  Bert.

  Hello and welcome,

  From page 7 of the User Guide (English) - ThinkPad X 1 carbon (20 A 7, A 20, 8)

  Z.

  

• I have a HP Deskjet D4160 printer. The reset button will Flash. Diagnosis HP said there was a "breakdown of pen", but he didn't give any directions on how to fix it.

  Original title: breakdown of pen deskjest d4160

  I have a HP Deskjet D4160 printer. The reset button will Flash.  When I ran the HP diagnostic he said there was a 'pen failure' that had to be fixed, but he didn't give any directions on how to fix it.

  Hi Fred Cornell,.

  ·         You have any problems with the performance of the printer?

  ·         What operating system is installed on your computer?

  ·         The printer works well before?

  You can check the link mentioned on official website of HP that describes the problem for the specific printer model you are using.

  Flashing lights in the HP Deskjet D4160 printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00635074&cc=us&DLC=en&LC=en&product=501857#n129

  Alternatively, you can contact HP support for help on the issue.

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Let us know the results.

• I don't know the username/password for the configuration web page and reset button is not reset.

  Hello guys, as I said I don't know the user and the password in the web settings page of the basis of my WRT120N (Linksys router model) and I almost tried everything with my reset button, and it does not seem to reset my router. Please, if you guys know something I could do to fix my router, that would be great. Thanks for the help!

  Be fixed by myself some moderator let this thread closed.

• Broken 300 SG - need to reset switch Reset button

  I can't reset my switch and realized that the reset button is missing/broken.  Is there another method to reset the switch to factory settings?  If this is not the case, how to find the IP address of the web interface, it is not the default.

  Hi Mark,

  You can try a free tool like Angry IP Scanner to scan the subnet and search for all devices or install the toolbar FindIT in your browser that will locate the switch.

  http://www.Cisco.com/en/us/products/ps10660/index.html

  -Marty