Reset of oversized IPR (488%) in Windows XP

Similar Questions

• Pavillion M4-1006tx: 10 Windows reset on a laptop pre-installed Windows 8

  Hello

  M4-1006tx Pavilion my laptop came with pre-installed Windows 8. I have upgraded to Windows 10 last July and now I would like to reset this installation of WIndows 10. I discovered that there are 2 methods to do a reset:

  1. in the "settings" inside Windows 10 frame and choose the reset option

  2. thanks to the recovery of the system (F11).

  If I choose to reset through F11, it will install Windows back 8 or 10 Windows instead? As it happens with Windows pre-installed 8.

  And if I choose to reset settings of Windows 10, will it suffer no problem at reset?

  Thank you!

  Hello

  To answer your questions in order:

  1. the option reset under will reinstall Windows 10 - it is impossible to say if you would run in any problems using this method, but it still does not work for everyone.

  2. the option to access the Recovery Manager via F11 at startup would normally be to reinstall the original operating system (Windows 8), but it will not work now as a upgrade to Windows 10 breaks this feature - if you want to reinstall Windows 8, you must use the recovery media (disk or flash drive) that you created when you bought first Notepad - a guide on the reinstallation of Windows 8 of the recovery media can be found on the following link.

  Performing a HP System Recovery - Windows 8

  3. Fortunately, there is also an option at your disposal 3.  As long as the current installation of Windows 10 has activated Ok after upgrade from 8.1, you can simply perform a new installation of Windows 10 as stated in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How can I reset the time and date on Windows Vista?

  How can I reset the time and date on Windows Vista

  http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html

  http://www.Vistax64.com/tutorials/114989-date-time-change.html

  Read the information in one of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I reset my forgotten administrator password for Windows 7, without a password reset disk?

  How can I reset my forgotten administrator password for Windows 7, without a password reset disk?

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• If I have my latop factory reset will I have to reinstall windows 8.1?

  Original title: factory reset

  If I have my latop factory reset will I have to reinstall windows 8.1?

  Hello

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to update Windows 8 and 8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8 and 8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  Repair and recovery (create a recovery USB disk and more)
  http://Windows.Microsoft.com/en-us/Windows/repair-recovery-help#repair-recovery-help=Windows-8&V1H=win8tab1

  And if necessary, you can make a bootable disc.

  Download ISO 8.1 Windows using your Windows 8.0 key
  http://mcakins.com/2013/10/19/download-Windows-8-1-ISO-using-you-Windows-8-0-key/

  Download iso Windows 8.1
  http://philipyip.WordPress.com/download-Windows-8-1-ISO/

  Download ISO Windows 8.1 using a key of Windows 8 and a few simple tips
  http://BetaNews.com/2013/10/21/download-the-Windows-8-1-ISO-using-a-Windows-8-key-and-some-simple-trickery/

  You can also do a recovery USB drive.

  How to create a USB stick recovery in Windows 8 and 8.1
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  On November 15, 2013 8.1 Windows Backup Media will be available for purchase. Newegg and
  others offer disk,

  "Backup Media" Windows 8.1 disk has the sale soon
  http://BetaNews.com/2013/11/05/Windows-8-1-back-up-media-disc-available-to-buy-soon/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• YouTube is massively oversized in the firefox window?

  I am running windows 7 on a Lenovo ThinkPad. All my plug-ins are up-to-date. I've searched and searched, but no one seems to have had this problem!

  This could happen if you did use the 'zoom' on any page. To reset the zoom back level by default, press Ctrl + 0 (that's a zero). You must do this before you click on the drive, otherwise Flash will intercept the keyboard. Does make a difference?

• Restore backup after the reset Time Capsule (1st generation) using Windows PC

  I apologize if this question is somewhere already. I tried to find an answer and I've seen similar discussions but not exactly what I need.

  A bit of history... The location is a small school with about 10 cameras, its network systems, point of sale, cloud networked storage, etc. Was asked by the owner to create or activate a Guest WiFi SSID. They said he worked at the same time, but some work was done by a previous technician and they lost the WiFi of comments.

  So I used the Airport utility to access the time Capsule. However, after the change to the next level (enable the public IP sharing? maybe?), he ended up destroying the entire network, as in nothing was back upward when the utility scanned for devices. Even the Time Capsule was not recognized by the utility. I ended up doing a hard reset on the Time Capsule and do my best to manually configure the device again, even though I was not initially designed the network. I have also discovered that 1st generation Time Capsules have no comments WiFi capabilities.

  To make a long story short (too late... "I know sorry..) .. I got most of the features, functions, etc. on the network back where they were before, with the exception of camera systems and a network storage device active cloud to the owner's House.  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?  I would need to do this using a Windows computer.

  Any help will be greatly appreciated. What I'm trying to avoid the most is having to reset all the cameras, which are upstairs, hard to reach areas. I guess that people who were previously assigned on the cameras must still be there. If only I could get the Capsule of time exactly where it was before he went down, which would allow me to save a lot of time and frustration.

  You can also (2nd choice)... If there is a simple way to detect the active network cameras and other devices on the Time Capsule and pull the IP out of them, that would be helpful as well.

  Thanks in advance for answers!

  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?

  You have my sympathy all...

  Been to this place before today... and I always get myself into it by pure stubbornness... I should just walk on some of these jobs and tell them too hard...!

  What you had to do was to export the configuration before you start playing. Without export of the configuration there is not much hope of healing to less than the previous tech saved a configuration to the unit... This example gets much delicate.

  The TC is actually able to contain several configurations... There is a good chance, however, that wipe you the.

  Anyway... coming to the serious Tin. (same version on Mac and PC utility should work the same).

  Here's my TC who foolishly a reset.

  

  When I do something... first manual configuration, I wonder is to revert to the previous version.

  

  You have done or could you saved the previous settings as a profile... I hope that you did... in the hope...!

  IF so, you have a saved profile.

  In the area of the top menu go in manage profiles.

  

  

  Now, if you are lucky or did the job just last time... by accident... you'll have a saved profile... Just click back.

  

  If nothing is there, or it's current settings... Sorry, but you didn't know something was there... and you cannot was expected to know the trouble you would get yourself in.

  If you have changed a setting in the TC of the bridge in router mode...

  

  (enable the public IP sharing? maybe?)

  Getting back to what it was... mode bridge being the most common.

  At the bridge of the TC does control most things... and you need to return to the main router.

  If the TC kicking upward a stench to return to the bridge, reset it simply still once and then bridge will work... It would be useful to loads to remember what was the setting... just to see the bridge takes the TC of the equation to know where the cameras are.

  If the cameras are on static IP, they will respond to a ping scanner... If the primary router is configured for a standard range of IP addresses... 192.168.1.xxx some.

  Then the TC in bridge must have also taken an ip address in this range and the cameras (Ethernet or wireless)?

  I hope that ethernet, but if they were using the TC as a wireless access point, unless you know exactly the SSID wireless as it was in the past then you do not have this info...

  Look at any computer, they have in the building that was running wireless and watch all the SSID that they use... one of these is likely the TC and you can restore this name.

  Or drop a camera... and ethernet allows to connect to him... and find the ssid, that it's been fixed... redefine the TC on this name (SSID) wireless security... all cameras must be able to connect to it... and you can then restore the entire system by connecting to the IP address that will be displayed in the list on the main router.

  Good luck.. as says Han Solo... you'll need!

• Factory reset x 360 13-s121ds convertible windows 10

  13-s121ds convertible Windows hp 360 10 x, I received for Christmas, it was a gift.  I wanted a bigger screen, so I plan to return it to hsn for a larger 17-inch laptop.

  I installed a few items and saved the laptop before I changed my mind.  So I read all the instructions to factory reset this new laptop, but none of this does not work.  The new laptop came on a windows 10 platform, so all the instructions are for windows 8, which looks a bit different.  I have a 500 GB external drive vacuum that this laptop would not recognize in order to create the recovery disk/partition.  the f11 option will not find the partition created by HP, and I am aware that I don't need a windows recovery, but I need a discount for the HP original until I return the new portable software to a larger factory.

  Why can't I find a simple solution?  I have an external storage drive, it wouldn't recognize or use it, I did the F11 option and hoped it would recognise the recovery already partitioned option, nothing wants to work.  Please help, I have until 31/01/16 to return this laptop for the above-mentioned trade.

  Laws Fuller

  Recovery will not use an external hard drive. There's a flash drive. However I would try if possible partition recovery.

  Maybe this will help.  10 Windows Recovery:

• How to reset my security question in my windows live id?

  heeeeeeeeeeeeeeeeeellllllllllllllllllllllllp

  How can I remove my security question to reset my password if I have made a typo in my windowslive id?

  Hi Mike,.

  Since you are facing problems with your Windows Live ID, you can publish your application in the Windows Live Forum for assistance.

  In the Windows Live Forum

  http://windowslivehelp.com/searchresults.aspx?query=reset%20security%20question&ProductID=10

• E-mail/password reset for an xbox 360. Windows Live support is me misleading to their moderators, etc. I need some help here!

  I need a password reset on an old e-mail account linked to my xbox 360. (the enamel of related Xbox Live account). However after going around in circles with the xbox and Windows Live support person will help me. I have provided more than enough evidence that its me (old/new address, debit card info AND xbox console ID AND serial number for information). And I am NOT to START a NEW GAMERTAG due the fact that I have spent money under my current gamertag. Now they are misleading me to the moderators of Windows with this problem. So now what?

  E-mail bellsouth.net and its related help/support page has since been purchased, reformatted and dissolved for their new name like ATnT. Their support tech/operators won't help me as well since it is a problem of bellsouth and not an ATnT. But the email is bellsouth.

  I can't do any kind of password reset because I forgot my secret question answer. A mistake in good faith, but one that keeps this issue to be resolved. I have provided a list of answers to him but still no help and I keep getting turned down and rejected.

  Windows answers forums are for technical problems and we do not have any control over the resets password for all Windows, XBOX and Windows LIve accounts.

  You will need to contact Windows Live Support as Kim said.

  http://windowslivehelp.com/product.aspx?ProductID=15

  Thank you

• Envy 15-c101dx: 8.1 Windows reset always available after upgrade to Windows 10 and refreshment?

  I tried to troubleshoot and fix a driver of hareware problem that was discovered after doing the upgrade of Windows 10 Windows 8.1. Before updating my system, I was warned by the software that I would not be able to return to Windows 8.1 if I did the update with the upgrade of Windows 10 still installed. My question is if Windows 10 also stop me from going back to Windows 8 if I did a reset of the system?

  I played it safe and restored back to 8.1 for Windows before you reset this time, but this will delay upgrading me to Windows 10 in confidence (1 month to try it is not a lot of time).

  Hi @hyjiad.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY x 2-computer laptop 15-c101dx and concerns with the Windows 10 upgrade. It shows me that your system is compatible with Windows 10 drivers. It tells you which driver he would have a problem with?

  The best I can offer at this point is to create your a HP recovery USB drive.

  Here is a link to Windows 10 FAQ. It gives you that Go Back is a feature that will restore your computer to the old operating system that was installed before you upgraded to Windows 10 for only 28 days. But with your recovery USB disk you can do at any point and time.

  I hope this helps you.

  Thank you.

• How to reset the winsock regestry in MS Windows XP Professional SP3?

  I have Windows xp professional SP3 - Media center edition upgrade v.2005 v.2002

  "How to reset the Protocol Internet (TCP/IP)"
    <>http://support.Microsoft.com/kb/299357 >

  "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP, and in Windows Vista"
    <>http://support.Microsoft.com/kb/811259 >

  HTH,
  JW

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• How to completely reset my emachines computer you use windows vista, back to factory settings

  you try to reset my husband (my old man) a computer to factory settings, I have the disc that came with it.  But it asks where you want to install windows?  And I do not know which of the two options to check.  I want to completely rest the whole damn thing! to the factory settings.  I need first of all go to computer and reformat the drive c and d both and then go into the installation disc and then install or what?

  Hello

  Please ask this question throughout these Forums of Vista will stop you.

  For moderators, please merge:

  http://answers.Microsoft.com/en-us/profile/f750afd8-9B40-4FF7-8911-be843623ef83

  You answered no to the support offered to you in one of your other Threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/if-i-do-a-clean-installation-of-Windows-Vista-will/4a4a1fce-c7f0-4ECE-b406-d11f3140cc7b

  And this is the first time you mentioned it is an eMachine and you have a recovery disk.

  You should normally install windows on the C: partition, but we don't know how he put up with the installation on the eMachine recovery disk.

  eMachine belongs to Acer and Acer used to put in place their hard disk with two partitions + a hidden recovery Partiiton

  Please contact eMachine support at the following link for the exact way to use their recovery software.

  http://www.eMachines.com/EC/en/us/content/home

  See you soon.