Resolution of conflicts of LabVIEW

Similar Questions

• Problem with DESC ordering for the resolution of conflicts

  I am trying to create a composite event with semantic alias set and table. I created a simplified below example to show the problem that I get. I have assessments that are entered into a table, and whenever a new is an elder at the same address, the composite event should fire. But, if there is more than two for the same address, I want only to raise the event for the most recent prior assessment. I know that this is not yet a complete solution I have to find a way to expire old events after they are used for the composite event, but I can't get beyond the error I get. CREATE_RULE_CLASS gives me the following error:
  
  Error on line 1
  ORA-41621: error in ordering the property:
  ORA-00904: "RLM$ EVENT. "" RLM OBCOL_0DESC$ ": invalid identifier
  ORA-06512: at "EXFSYS. DBMS_RLMGR', line 709
  ORA-06512: at line 2
  
  Looks like he's trying to treat my "DESC" designation under another name of the column to order by. Oracle 11g Enterprise 11.1.0.7.0. Here is my script:
  
  CREATE TABLE APPRAISALTEST
  (
  APPRAISAL_ID NUMBER (20) NOT NULL,
  ADDRESS_ID NUMBER (20).
  DATE OF APPRAISAL_DATE,
  NUMBER VALUE (10)
  );
  
  CREATE A UNIQUE APPRAISALTEST_PK ON APPRAISALTEST INDEX
  (APPRAISAL_ID);
  
  
  Start
  DBMS_RLMGR. CREATE_EVENT_STRUCT (data = > 'AppraisalPair');
  
  DBMS_RLMGR. () ADD_ELEMENTARY_ATTRIBUTE
  Event_Struct = > 'AppraisalPair ',.
  attr_name = > "appr1"
  tab_alias = > RLM$ TABLE_ALIAS ('APPRAISALTEST'));
  
  DBMS_RLMGR. () ADD_ELEMENTARY_ATTRIBUTE
  Event_Struct = > 'AppraisalPair ',.
  attr_name = > "appr2"
  tab_alias = > RLM$ TABLE_ALIAS ('APPRAISALTEST'));
  end;
  
  BEGIN
  DBMS_RLMGR. () CREATE_RULE_CLASS
  rule_class = > 'AppraisalPairRC ',.
  Event_Struct = > 'AppraisalPair ',.
  action_cbk = > 'AppraisalPairCBK ',.
  actprf_spec = > ' EVENT_TYPE VARCHAR2 (20), EVENT_PARAM VARCHAR2 (20),
  rslt_viewnm = > 'NewAppraisalPairs ',.
  rlcls_prop = > ' < composite equal = 'appr1. ADDRESS_ID, appr2. ADDRESS_ID"' |
  ' consumption = command 'shared' = 'appr1. ' APPRAISAL_DATE DESC' cnfevents = 'I' / > ");"
  END;
  
  SET DEFINE OFF
  insert into AppraisalPairRC (rlm$ ruleid, score_component_type, score_value, rulecond$ rlm)
  values ('Rule1', 'ABC', 'DEF',
  ' < condition >
  < and join = "Appr2.APPRAISAL_DATE & gt; Appr1.APPRAISAL_DATE and Appr2.VALUE & gt; Appr1.value">
  < name of the object = "Appr1" / >
  < name of the object = "Appr2" / >
  < / and >
  (< / condition > ');

  Hello

  You came across a bug that has been fixed in the latest version. You can work around this problem by changing the command clause as follows.

  SQL> BEGIN
    2            DBMS_RLMGR.CREATE_RULE_CLASS (
    3            rule_class => 'AppraisalPairRC',
    4            event_struct => 'AppraisalPair',
    5            action_cbk => 'AppraisalPairCBK',
    6            actprf_spec => 'EVENT_TYPE VARCHAR2(20), EVENT_PARAM VARCHAR2(20)',
    7            rslt_viewnm => 'NewAppraisalPairs',
    8            rlcls_prop => '');
   10  END;
   11  /
  

  Hope this helps,
  -Aravind.

• New user of watercourse having set up the conflict resolution

  I have just recently started working with Oracle Streams 11 GR 2. I have two-way replication between two data bases of work. Now I'm starting to experiment with the resolution of conflicts. I use a simple table with only three columns (no LOB). I tried to clarify first DISCARD, then CRUSH and MAXIMUM then (after adding a TIMESTAMP field that is filled by a trigger). In each case, when I try to commit an insert of the exact same rendered first in a database and then immediately after the second database, the account assignment for each abandoned with a uniqueness violation. Anyone has an idea why the conflict resolution is not doing its job?

  lol, took me a while to realize:

  Update conflict managers deals updated and you do an INSERT. There is a uniqueness conflict:

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10705/conflict.htm#i1006244

  You are supposed to use one set of keys by DB. usually people give a different range of sequence by site.

  http://download.Oracle.com/docs/CD/E14072_01/server.112/e10705/conflict.htm#i1006279

  Now if you can not use, then set an error handler that transform the INSERT in an UPDATE.

  Cheer.

  B.Polarski

• Y at - it something to pass classes without causing conflicts to project?

  I am using OOP for a few months, but I was frustrated a handful of times trying to move classes. With other files, I just go in file display and click 'Move to disk', which has always worked very well.

  But if I try to move a folder that contains several classes or classes nested in subfolders, the FREAKS outside project. It of almost like LabVIEW moves the files one at a time, but not updated to other classes on new locations of methods, dependencies, etc. Then she moved something out of use and then all the classes that is supported on this monster file out, ask yourself where the file went.

  Then, about a thousand warnings pop up, and I can't reject them both. In addition, the resolution of conflicts does not work because LabVIEW confused on the point where the files loaded into memory are now located on disk.

  I had to source control returns to my workspace set to return to a State of operation. Then I usually move the classes on one at a time, which is a desperately slow and painful process.

  I'm doing something wrong here?

  I ran into similar questions before. Project files and library are just text. I moved things and edited the paths in the project/lvlib file. Can also use a backup as the library file. Your move is transformed into a copy and rename operation.

• LabVIEW library for twain

  We are currently using the demo version we sent by Graftek Imaging on the following link:

  FTP://FTP.AllianceVision.com/LabVIEWtools/Toolkit Twain LabVIEW.zip boxes.

  After reading the manual and install the libraries successfully, we are not able to run the DEMO VI included in the lib of the user. We get an error: error 97 took place at an unknown system error in TWAINV5 - clear Acquisition.vi-> TWAINV5 - demo IMAQ 1. vi this is due to the "Open Source Manager VI" due to the error: - 2147221164 - class not registered in TWAINV5 - Open Source Manager.vi-> TWAINV5 - demo IMAQ 1. vi

  To ensure that our DSM and the Data Source to scan (Canon LIDE220) are connected successfully, we used twacker32 and everything was fine. We do not know if our problem is with the installation of law libraries, or using the library of the Vision of the Alliance. We are very interested in resolving this issue and who runs the application before investing in a license. Thank you for your support.
  Steps to reproduce the BP: we have just opened the files of the DEMO: demo IMAQ1 and IMAQ 2 demo.

  Eve thnx for your concern... .i got the solution of the question which is the version compatabilities I work on labview 2015 64-bit and the cannon scanner scangear is 32-bit, which causes the conflict in labview twain driver which is obtained by the site of the alliance and the scanner driver

  is what I do for the solution: using labview 2015 32bits and the scangear driver to my scanner and it works well

• For what display size is optimized Labview 2012?

  Hello

  I have a top of Tower with a high resolution (1920 x 1080). After that I installed Labview2012, on some of the dialogs, e.g. Tools-> Options (see image) not all text is shown completely.

  Also, when I opened VI designed for a lower resolution display I overlap on the labels and controls.

  Can someone tell me if this is due only to the display resolution, or also the Labview? And what display size optimized Labview2012?

  Concerning

  

  Hi, I found the problem. Text size DPI in my Windows display settings has been set to 120 DPI. After, I changed to 96 DPI, text and labels returned to their normal position.

• Compilation of Xilinx not installed labview 2015 FPGA tools

  Hello

  I just installed Labview 2015 + FPGA Module on my computer with an older version of Labview 8.6.

  When I compile a labview FPGA project 2015 I got this error message "year error occurred while communicating with the server compilation" and warning "tools of Compilation of Xilinx not installed."

  I can assure you that my server of 2015 lunch perfectly and I installed everything correctly. I assure that it is a conflict between labview 8.6 and 2015 therefore uninstalled the older one.

  The problem is my build configuration is set to Xilinx 10.1 (which should be 14.7) and there is no way to change this.

  After looking around I found that Labview looking for best compilation tools then maybe this is not the problem

  Is there something I missed?

  Kind regards

  Hello

  I found the source of the problem. The FPGA, I used was based on a FPGA Virtex II matrix that is not compatible with this version of the build tools.

  Thanks for helping me!

• LabVIEW 2012 Setup error

  Hello guys,.

  I need to install LabVIEW 2012 on my computer (windows 7 32 bit), however, when I clicked on the setup.exe. A popup window to install Microsoft.NET framework 4.0, after, then another popup window to show an error occurred during the installation of Microsoft.NET framework 4.0. Is a conflict of LabVIEW 2012 with Windows 7?  There is a thread discussing this topic. The suggestion it's reinstalling the OS. For the PC here tergiet, reinstalling the operating system is not an option. Is it possible to go over the installation of Microsoft.net? or any other suggestions? Thank you very much!

  right after the update here.

  Microsoft .NET must be installed separately here. After that has been installed, the installation of LabVIEW 2012 could spend...

  Thank you

• PXI-6608 fairer frequency measurement

  The attached VI measures the frequency of a known Hz 24,575,000 signal. When measured with a meter of frequency of 3 GHz Agilent 53181 A-010, that measure 24,575,999.4 Hzsignal. When the same signal is measured with the PXI-6608 meter, this signal is 24,576,149.3 Hz. The two instruments are calibrated, and the two measurements were performed with a portal of 8 sec.

  I use the more precise measurement technique? My PXI-6608 is defective or out of calibration, although it is brand new?

  various Info. :

  The PXI-6608 is in slot 2 a PXI-1033. I connect to CTR1 via PFI - 35, triggering on the front and I have a door 8 sec for sub-Hz resolution.

  2009 LabVIEW, TestStand 4.2, MAX 4.6.1

  Thanks in advance,

  Sam Broyles

  
  

• Close Excel workbook ActiveX will not save

  I use ActiveX with Excel and try to save and close a workbook, but not to close the application.

  My question is twofold:

  First of all, I can't get a workbook to close when save is wired to her and defined as True. But once save set to False, the workbook closes very well (except it does not save of course). I thought that this could be linked to the following sentence of MSDN

  If there are these changes and the workbook appears in the other windows open, this argument is ignored.

  To check that this is not the case, I completely closed on Excel and tried again. Always the same question.

  So, my next step is to try a workaround as the use of the saveas method, then I can close the workbook without saving changes after (this constant i.e. false wired upward).

  Since the MSDN site: xlLocalSessionChanges = 2 the local user's changes are always accepted.

  But, when I "2 wire" to the variation of resolution of conflict for the saveas method, I always a dialog box asking the user if it is ok to replace the file to appear.

  Anyone encountered this before? I stuck links to MSDN, below.

  http://msdn.Microsoft.com/en-us/library/bb241584 (v = office. 12) .aspx

  http://msdn.Microsoft.com/en-us/library/Microsoft.Office.Tools.Excel.workbook.close (v = vs. 80) .aspx

  http://msdn.Microsoft.com/en-us/library/Microsoft.Office.Tools.Excel.workbook.SaveAs (v = vs. 80) .aspx

  Workbook has become corrupted. Solution was to recreate.

• API of BOTTOM add user with the PIM Memo/address settings

  Hello

  I try to add a new Blackberry user if LOW API with the PIM Memo/address configuration. I know that using the BASUserAdminClient it is possible, so I think it would be possible to do the same thing by using web services.

  Have no idea about it?

  Currently user control PIM by BWS is limited to control wireless synchronization and the resolution of conflicts, specification of the server is not yet supported for knowing where to retrieve the data.

• BlackBerry Smartphones recorded messages on phone to Word Doc on PC

  I have 50 or if the text messages saved on my phone I have to suddenly get printed to give to a specialist in resolution of conflicts in 14 hours-, who knew this would happen?

  I can't find a way to send them individually to my email and one at a time...

  There is no way I have the time or mental health to do it this way and I think that there MUST be a way faster, easier to do.

  Any suggestions?

  1 million thanks!

  K

  KayR1968 wrote:

  Well, I'd like to try the program but when I install my computer does not recognize the file type, and when I told him to check the Web for a program that could read what I have as a message "is not a file type recognized - no program to open it was found.

  I'm so lost and confused. If you are ready to help guide me through what whatsoever, I hurt, I would really appreciate it. I'll be here in about 4 hours then please, don't think that I abandoned, if I do not answer immediately.

  Thanks for trying to help!

  K

  'I suppose I didn't know sorry!' "I wrote:"

  (1) OTA this free software screen shot of your device.

  2) installs with ease, and I'll be there. Over-the-air install software screenshot

  I received for it's then the next best thing to a photocopier, I guess.

  Point the browser of your phone on the link I sent. Install the software. Choose a side key, or you

  adjustable to show the menu (but not on the picture).

  Then compose the message, click on the picture, compose the next message... Repeat as needed!

  Thank you

  Bifocals

• Panasonic NV-GS300

  I need if I can find los drivers Windows 7 para the NV-GS300 Panasonic Please. El OS Win 7 ve pero no dice "debe ser is a resolution of conflicts" y no reconoce la. I made everything that el os be replaced by pero Recomiendan no encuentra los apropiados in the web controllers.

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• Problems of Smartphones blackBerry sync with outlook, following a back up and restore

  It gave me a new BlackBerry "BOLD" device to replace a defective. I did a sync with my outlook, contacts etc. calendar so all the information was up-to-date and then backed up all my data from the original handset. I then successfully restored all of this data to the new remote control.

  Since I was not able to properly synchronize my phone with outlook. the blackberry desktop manager no longer link the contacts in outlook with the correct contacts on the handset. It so happens with messages with "resolutions of conflict" where he compares with Emma Smith on the BlackBerry smartphone, contact for example John Smith on outlook - have nothing to do with eachother. Both Outlook and the handset have the same information, but they are more link successfully.

  I wondered if it has something to do with how contacts are identified by the Office Manager and if restore information from the new remote control has changed that on the device?

  As I have more than 600 contacts, I am very concerned about doing the wrong thing and lose vital information and so far nobody's confidence was able to tell me what to do.

  Please can someone help me solve this problem?

  Thank you

  MarijkeV

  If you have the data synchronized in Outlook as a backup, you will be ok. You can also use the backup and restore utility to perform another backup of the databases on the device.

  If you delete this folder, you will lose any information on the BlackBerry or Outlook. Start with the Desktop Manager closed before deleting this file. After that you remove it, connect the BlackBerry to your computer, then open the Desktop Manager.

  From the Desktop Manager 4.3, I think, the icon you would go in to reconfigure the settins would sync | Synchronize

• Combine dissemination and replication integration

  Hello
  
  I'm new to the Golden Gate.
  
  I would like to know if a combination of replication of the integration strategy and distribution is best way to achieve the two-way replication so that we can avoid conflicts?
  
  I mean, if I have 2 data source A and B, I will raise a built-in source 'C' such as A and B will merge and C. I have implement a replication of dissemination of the merged data from 'C' return to A and b. Such a facility is still possible, and does make sense? It will help prevent conflict?
  
  Thanks in advance for your advice and suggestions.
  
  -SS

  You can do it, but...:

  Where does she live data merged on A and B? Another scheme? If you don't mind using resources and additional storage to duplicate/repeat your data, go ahead. However, you should always take account of conflicts in C when the new flow of A and B happen, so everything that you do use another instance (you have the license for this?) and move the matter from one place to the other. Just deal with the resolution of conflicts at A and B and be done with it.