Resolution of location sharing
What sharing content with a Mac or PC on CE8.0 content does not fill screen completely. I see two grey bars on the side and I was wondering if this does not work as expected? I thought that the previous version allowed content to occupy the entire screen.
Thank you
Graham
Hi Graham,
During the resolution of shared content is 16:9, the content will take the entire screen on the endpoint. If not, the end point will add gray or similar bars.
-Amélie
Tags: Cisco Apps
Similar Questions
-
Is there an optimal resolution for iCloud sharing Photos
Is there an optimal resolution for iCloud Photos sharing on computers, iPad and Apple TV?
I want to scan photo album my grandparents to share with my friends and family. I scanned a few pages of test at 3200 x 2000 pixels. They have look great on my Mac and look great on an iPad also. I want to future proof them for 4 k and recent televisions.
Is the size of 3200 x 2000 pixels too small, too large or OK?
If you want to transfer photos using iCloud shared Albums, photo sharing, they will be transferred from smaller - the edge long will be at maximum 2048 pixels, unless they are panoramic.
I would scan the photos to a pixel size you want to keep for reference, so you can print them in a format you like - 4000 x 3000 pixels or more, and when you share with iCloud, sharing photos they will be slightly reduced in any way.
-
shouldHow I don't know who removed the disk file or folder location sharing?
How do I know that erased on file location of the shared drive or folder?
Never used a tool so third 3rd could not recommend a.
It is a guide to allow logging in versions of Windows.
http://blog.windowsnt.lv/2011/11/15/tracking-user-activity-English/
It does what it is supposed to, if there is a problem is the fact that the results are in the event viewer that isn't the best tool in terms of ease of use.
-
Members of the family can share Contacts? A member of the family is on IOS9 and others are on IOS10. Our calendars are sharing but not our contacts?
No, sharing of family does not share Contacts. He shares:
Purchases
(If you are registered) Apple's music
Family Photo album
Family calendar
Location sharing
Find my iPhone
Apple - iCloud - family sharing
See you soon,.
GB
-
Uninstall Avast engine of research?
I installed Avast Antivirus some time ago, stopped using it, then uninstalled, but I find few remnants of it here and there (I don't know which is bad, but it's boring), and I just found in my search bar there is a search engine 'Google (Avast)', so I go into the search parameters and remove it , but worried he might still be installed somewhere. I am unable to find it anywhere, then someone can advise on this?
Firefox detects search plugins in two different places. We're in your personal settings, and we're in the Firefox program folder. There could still be a third location (shared settings folder) but I have not seen before.
To check your personal settings folder:
Open the settings folder (AKA Firefox profile) current Firefox help
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table of the page, click on the view file"" button. This should launch a new window that lists the various folders and files.
Look for a folder named searchplugins and click inside to see if you find that anything unwanted.
Keep this window open for the next step...
To verify the folder Firefox program:
Since you have a 64-bit version of Windows, go to:
C:\Program Files (x86)\Mozilla Firefox\
Click on browser then searchplugins to verify whatever it is unwanted here.
OK?
You can check for all avast! modules modules on the page. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
Switch categories by using the left column. The key is Extensions, but you can also see Plugins.
-
Is there a way to display metadata (file specifically size) like a «View» mode
Some of my wedding photos have been confused with some high resolution more written by versions low resolution used for sharing and I need an easy way to find the low resolution but at the moment I have to click on each photo, then click on 'i' to get the metadata which is laborious. I'm sure that iPhoto was a way to do this via the sidebar, but can't find an option in Photos?
iPhoto could not do either.
Why do you think that some versions have been replaced?
-
When I boot back into OS X El Capitan, I can see screen burn-in remains of my Windows 10 homescreen.
My screen on Windows 10 resolution is located at 2560 x 1440 (recommended).
Graphics card Specifications:
iMac specs:
- iMac (27-inch, late 2012)
- Intel Core i7 3.4 GHz
- 32 GB 1600 MHz DDR3
- NVIDIA GeForce GTX 680MX 2048 MB
- OSX El Capitan | 10.11.3 version
- Boot Camp | Version 6.0.1 (522)
- Apple Magic Mouse 1 | AA batteries
- Apple Wireless Keyboard 2011 | AA batteries
Thank you for your time!
Avoiding ghosting on screen LCD Apple poster - Apple Support
-
It seems that changing the settings of project in iMovie (10.1.2) is no longer possible. I have not tried to do so within a certain time. But each project is about to 720 p 60 unless I drop something of better quality. I have a lot of old stuff that is of poor quality, and not taking into account the project settings to match the lower resolution and cadence. Does anyone have a solution for this?
iMovie sets the frequency of images and based on the first clip that you insert in the draft resolution. When you share the project, you can select your settings
for the quality and options of the resolution in the sharing menu box that appears.
-
Hotspot Droid on Verizon RAZR problems
Hi all
Is anyone else having problems with the help of the RAZR as access point mobile on Verizon Wireless? I received new mt Droia RAZR last Thursday and have been a persistent problem of access to Web sites randomly when using the RAZR as a mobile hotspot. I have filed cases with Verizon and was back to Motorola customer of level 3. Level 3 support had take me several screenshots of sites hang up and support.
I bought the RAZR to replace a MIFI 2200 I used as my hotspot. Today, I had Verizon cancel the hotspot on the RAZR and reactivate my MYFI until some resolution is located. I would like more information about what is done to remedy this problem. I saw on other blogs that this problem is not unique to me. Also, it was of a "firmware update" massive ongoing issue of development, and Verizon mentions to me that an upgrade was due sometimes to mid-November.
News would be greatly appreciated.
Rise of Larry
New Member of the forum
-
All of a sudden I'm unable to download files. I find that the file attributes have a blue box to reading only one box for the files in the folder, I try to change it but it returns immediately. Have looked for a solution, but nothing seems to work.
What to know before applying permissions to a file or folder
http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folderEven if the box is blue,
Your name user account has full rights to the files inside.
If you notice a UN-block button click it and apply and OK.
The user account folders are still isolated from other users on the same machine,
Unless the files are in a location shared,
Home group from start to finish
http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish
File sharing essentials
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials
Other users,
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/sharing-FilesFolders-with-others-on-the-same-PC/eb2a62da-eff0-4fb5-B06B-0cc454487a4c
Share files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network
Home network, wireless network and computer networking Made Easy
http://www.home-network-help.com/
Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html
Networking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/ -
WiFi connection works, but cable has limited access.
Hi I had a problem with my internet connection under windows 8. I got 2 networks, public and private, and I can't delete one of them. I tried turning power on/off (network location) sharing, to update/reinstall all drivers and windows updates. If I unplug the cable, connection Wi - Fi works very well. But when the cable is connected, wifi says connected, but does job and cable has limited access. If I turn off wifi, cable always says no internet access. Internet works fine on my other laptop with win7. I am connected to a mobile internet with modem usb Axesteel by WL500gp (oleg firmware). Here is a picture of my problem:
+ ipconfig/all with my cable disconnected, otherwise I couldn't post.Windows IP configuration
Name of the host...: Ducktide-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Local Area Connection wireless LAN adapter * 22:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Hosted network virtual card
Physical address.... : 52-08-CA-83-59-A4
DHCP active...: Yes
Autoconfiguration enabled...: YesLocal Area Connection wireless LAN adapter * 11:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Wi - Fi Direct virtual card
Physical address.... : 12-08-CA-83-59-A4
DHCP active...: Yes
Autoconfiguration enabled...: YesEthernet Ethernet adapter:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
Description...: Realtek PCIe GBE Family Controller
Physical address.... : C8-60-00-11-AE-9E
DHCP active...: Yes
Autoconfiguration enabled...: YesWi - Fi wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: No wireless Qualcomm Atheros AR9002WB-1NG
network adapter
Physical address.... : 00-08-CA-83-59-A4
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::7cb8:2081:678d:d3d6% 12 (Preferred)
IPv4 address...: 192.168.1.134 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Monday, December 23, 2013 16:33:57
End of the lease...: Tuesday, December 24, 2013 16:42:51
... Default gateway. : 192.168.1.1.
DHCP server...: 192.168.1.1.
DHCPv6 IOOKING...: 251660490
DHCPv6 DUID customer...: 00-01-00-01-18-17-B5-8C-00-08-CA-83-59-A4DNS servers...: 160.218.167.5.
192.168.1.1
NetBIOS over TCP/IP...: enabledCard tunnel Teredo Tunneling Pseudo-Interface:
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2001:0:5ef5:79fb:340 b: 3b1b:3f57:fe79 (Pref
made a mistake)
Address IPv6 local link...: fe80::340b:3b1b:3f57:fe79% 16 (Preferred)
... Default gateway. : ::
NetBIOS over TCP/IP...: disabledCard adapt 6TO4 tunnel:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 card
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {4EE390FE-FA6B-4548-825E-E5A2F3A33080}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #9
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {2206F404-0D8D-4EE5-B28E-898469440B68}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #10
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesHi Jerry,
Please, try the following steps:
Method 1:
You can click on diagnose to see if it shows the error message at the time of diagnosis.
The diagnostic button is the screenshot you sent for the status of the Ethernet.
Method 2:
Reset the TCP/IP stack.
One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.
The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:
a. open an command prompt, press the Windows key + X select prompt as an administrator.
b. When the user account control box pops up, click on Yes.
c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:netsh int ip reset c:\resetlog.txt
d. Note: If you do not specify a path of the directory for the log file, use the following command:netsh int ip reset resetlog.txt
c. restart the computer.
d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
SYSTEM\CurrentControlSet\Services\DHCP\Parameters.e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt
Method 3:
Uninstall and reinstall the device adapter NIC from Device Manager can help.
How can I troubleshoot network card?
In addition, the driver version 7,077 for the Ethernet tΘlΘcharger the link given below.
Please post with the State of the question.
-
Recognition of Capture of Document Oracle server - how does it work?
Dear Experts,
Our intention is to implement a barcode solution to replace the indexing of the ODC.
So, we have recognition server to do. So, I went through the Administrator's guide and set up a profile profile of Recognition server.
In the console of administration of the ODC, I created a Cabinet and a scanning profile...
I created a few TIFFs with code barcodes (code 39) and placed under the path where the scanner install profile.
But Recognition server not to treat those and just stay idle.
Then, I created a profile of index also Document capture and import an image to the profile of indexation.
Recognition server then checks in the batch record for a bar code that is not there.
So please explain to me how Recognition server works and how to create a free driver for this process. (indexing and principal - automatically)
Thank you
NIR
Certainly, you need to configure the import server that you give the location from where to choose files though e-mail where location shared etc.
After the server import import the files it will check if you have configured the recognition task, if yes then according to your profile for which you configured the recognition will be taken by recognition server.
In recognition server, we define actually create batch jobs, which determine the batches in the process and how to treat them.
Lots of recognition server contains all the settings to use when the batches are scanned, indexed, and committed. For example, batch processes determine how images are separated into documents how barcodes are read and assigned to index fields and if index values are assigned to an external database.
Batch processing can lead Recognition Server to search for tickets assigned to the Cabinet, scan of the first image of a Code 39 type barcode, read a value of eight characters bar code, assign the value to an invoice and drop the image in the given CAB file.
Just for info,
It will be good to use ODC 11 g.
-
Impossible to find applications
I install App Vol 3 and file sharing for applications. I run the capture tool and downloaded files in the share. Synchronize now on sharing, but no application is listed in the inventory. The action comes as green under rentals. The flight of the APA Director is deployed using the OVF. Anyone who has an idea why?
One thing that I'm not sure is the credentials that the location Sharing App flight use to connect to the windows server share? I can't specify that?
I finally saw what I did wrong... I mistyped the datastore prefix in the config of the CR... Now I see!
-
How can I share a work-in-progress with a remote colleague without publication?
How can I share a work-in-progress Muse with a remote colleague without publishing the project prematurely?
Hello
If you want to your colleague for just to see a preview of your work you can create temporary links using Business Catalyst.
You can create temporary link of the file > publish to Business catalyst. This will create a temp url for you colleague preview.
In case you want your colleague working on the site to make changes, then you can share the file the.muse with him on a location shared like dropbox, creative cloud etc.
But I remember that muse don't support a collaborative environment for you two can't work on the entire file at once.
Please let me know in case you need additional information.
Concerning
Vivek
-
Cs6 save the file for the printer company
Question on master Parent AI file, or art presented in another file I send to the printer?
I created a leaflet (2.83x11) that I can now add 3 to a sheet of 8.5 x 11 for 3 leaflets per leaf. When I save the master flyer (the 2.83x11), I crushed my text in text outlines to 1200 dpi and rasterized my art at 400 DPi and then saved the file. Ok
Then I open a new Board art 8.625 x 11.13 (to bleed) printing on the edge (border less) then place my Flyer 3 times on my plan of work and when I'm going to save this option to send to the printer here in lies my question (s)
1. when I record a new workplan with a related Parent file this related info will save the file so that when my (printer) opens this file I. I bring the file Parent bound with it too on my USB key? Or the artboard will save all the contours and raster art on 8.65x11 the work plan?
Take me to a second question
2. when I go to save this new artboard flyer and 8.5 x 11. I'm asked or warned of 72 dpi rasterization of the newly placed flyer to be saved and then placed in the 1200 and 400 dpi in as mentioned above. But I think I should go effect > rasterize > high or other (fill in PPP)
Here's the question if I save which place Parent, or the linked file and then rasterize, choosing 1200 as is the text of the first file is saved, it errors and says big enough to rasterize the 1200 dpi. IF I rasterize say 400 dpi does now that sharp text I saved in the Parent bound 1200 file? In other words how save you this file as it is stored in the master or the parent Flyer when you place it on a work plan for a printer?
CS6 AI not cloud.
Here's what I do. I would like to see the screenshots of the dialog where you are notified to rasterize. But, that aside except (ad I will continue when I have more time), the text in the presentation are vector curves. No need to convert to text converted to outlines. Leave the direct text, unless the printer ask contours. When you generate the PDF file, the text becomes incorporated. Resolution is located in the "exit". You set the resolution of pixelation in Illustrator, if you applied some type of effects of rasterization (such as shadows). It is, as far as I know, a maximum of 300 PPI in pixelation effects. In General, when using a CTP (computer-to-plate) pre-press, a 5080dpi output resolution is common to generate a point as thin as 150 lines per inch. Now get you to a point where you can understand the fundamentals and they understand no pixelation. No deer at the level of the sender.
Maybe you are looking for
-
How can I find my password for Thunder bird
I had to reset my computer and lost my thunderbird program. I downloaded a new copy, but I don't have the password. I can always access thunderbird on my other computer
-
Requests that are lost during the restoration of time machine
For example, recently my laptop (MacBookPro7, 1.) Intel Core 2 Duo. 2.4 GHz. memory to 6 GB) came up with a message saying to upgrade to el capitan, and after some research to see if my computer were compatible (OS X 10.6.8) I've updated. However, I
-
Satellite L650-11F is not supported on the service page
I can't find anything on the Satellite L650-11F in the pages of the service. ? f you have any idea please help me.I bought this laptop but I can not find any Abu knowledge in the web pages of Toshiba.
-
PhoneGap Application signature question for BB 6.0
Hello I'm trying to sign my application phonegap from yesterday, but is still not signed. Error: general failure of . Please try again. Server is maybe not available. Let me know by when the server is available. As it is urgent to get out.
-
Confirming a design where I need to save where the user navigated to the screen.
A matter of design, which is a good implementation of the following? I need to be able to save the location of the place where the user has scrolled, then when the user: Changing screens and returns to the previous screen. The application farm (moves