Satellite L650-11F is not supported on the service page

Similar Questions

• Why the Satellite L650-116 does not appear on the list of products?

  Why my notebook l650-116 does not appear on the list of products?
  It does not appear even with the auto detects the program located on the site.

  Hello

  I put t know what you mean?
  SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
  You can find the details on the Toshiba Cyprus page
  http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

  In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

  Welcome them

• Satellite L650-11F - question about brightness of the display by using Win XP

  I apologize;
  I want to know is why in windows xp before you plug the adapter into the laptop (Toshiba L650-11F), screen light is bright, but when I drag the adapter, the display light is dark? And the driver is installed

  Please help me

  Hello

  Alternatively, you can change the brightness of the screen by using the FN + F6 and FN F7.
  But as mentioned by Akuma; You should check the power options.
  I guess that the Toshiba Power Saver is installed because you use Win XP.

  In the configuration of the Toshiba Power Saver, you can assign the screen brightness level to certain power profile. For example; You can define a profile of power when the laptop is connected to the power adapter or another profile of power for battery operation.

  Perhaps the brightness of the display is set to a lower level, while the laptop works on sector
  Then change this value, and I think that this will solve your problem.

• Satellite L650-11F - cannot install driver page of the ATI graphics card

  I just bought a Satellite L650-11f and tried to update the drivers for my Ati hd5650.
  The problem is the control of catalyst can I install without problem but when I try to install the site display drivers driver ati I get this error:
  ATI catalyst mobility can t be downloaded due to the incompatibility of hardware/software on your computer. The version of your driver card is not supported. for an update of the graphics driver, contact the manufacturer of your laptop.

  How should I update with the latest display drivers cause the manufacturer are 6 months old?

  Hello

  You have a few problems with the Toshiba display driver?
  Graphics drivers from Toshiba are modified for mobile use, this means that the Toshiba drivers support for GPU overheating protection.
  ATI drivers don t support this protection and this is the reason why you get this message.
  Generally, you have to take the driver of Toshiba page

  Of course, it is possible to install the ATI drivers also.
  But you would need to install the driver in Device Manager.
  To use the Advanced installation procedure that would allow to choose the driver downloaded from the ATI page you simply forcing windows to choose such driver

  But note; You can use these drivers ONLY at your own risk

• Re: Satellite L550-129 does not support the Toshiba external HARD disk

  Toshiba Satellite L550-129 does not support disk Toshiba store.e canvio external hard.

  Al other portable thosiba in the family meets the canvio store.e and many former protable?

  Why do you think so?
  Drive external DRIVE is not recognized when you connect it to Satellite L550-129?

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• Drivers of recovery satellite L650-11F

  Yesterday I bought the laptop Toshiba Satellite L650-11F, I want to create or make a recovery for the drivers but I don't know how it is, can you help me please?
  I have already created a recovery on Toshiba Recovery Media Creator (2DVD disc) but I don't know if it includes drivers of recovery, it's on Windows 7,
  Help me please
  Thank you

  Post edited by: bacquet

  Toshiba disc creator recovery using you create the recovery disk/disks that contains the recovery image. It's a kind of footprint of the preinstalled operating system.
  With other words: this recovery image contains the operating system, all necessary drivers, specific Toshiba tools/utilities and some additional software.

  When you use it for the installation of the OS you'll have once again out of the box state.

• Satellite L650-11F - how to access HARD drive recovery?

  Hello!

  I have a Toshiba Satellite L650-11F.

  The other day I had a huge massive Goner virus (lol) and the computer is turned off. Whenever I tried to turn it on, it started to load Windows, and then restart. I tried to start Windows in safe mode but the same thing happened, just keep restarting. I tried to repair Windows (by pressing f8 and etc.) and without success, he kept restarting.

  So I tried to put it because it came from fabric and when I press 0 or F1 happears just 2 options: choose an opperating system to start or press tab to select a tool: Windows 7 tools: Windows memory diagnostic

  Can you help me please? Is there another way I can access the hidden hard drive recovery partition? Please :(

  Hi dakova,.

  Ist it Toshiba's original OS is still installed? I ask this question because it of necessary for the recovery of HARD drive. If you have installed another OS, you can access t HARD drive recovery option.
  In addition, recovery of HARD drive option is available if you press the F8 key before Windows starts. In the advanced boot menu, select fix my computer. The exact procedure is described here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  Alternative, you can take the Toshiba recovery disc. This will also restore the original settings. :)

• Adobe flash plugin not supported in the e bike 2nd gen (xt1506)

  fix Adobe flash plugin not supported in the bike e 2nd gen (xt1506) please.

  Nothing for Mozilla to difficulty. The phone uses a quad-core processor, in which the discontinuous old Adobe Flash player 11.1.x does not support because he can't stand of the ARMv7 processor.

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• SIM card is not supported in the activation

  I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).

  Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.

• The sim card that you are currently installed in this iPhone is a carrier that is not supported under the activation policy that is currently affected by activation serv

  The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...

  Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls

• Firefox 3.6.3 is not supported by the Google Font API

  I have Firefox 3.6.3 on my Macbook, but is only detected as 3.0.1on this form. When I have the link to the Google fonts site, he said, "we're sorry, but your browser is not supported by the Google Font API. To browse the fonts in the fonts directory Google please switch to a browser more modern. "I have to use Safari to access the page.

  URL of affected sites

  http://code.Google.com/WebFonts

  Maybe this article will help you - sites say that Firefox is obsolete or incompatible, even if it's the latest version

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Calibration error SMU-4141 niDCpower version 1.8, "calibration function is not supported by the device."

  Dear Sir.

  Nice to meet you.

  When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.

  It shows an error "function of calibration is not supported by the device." (false cae)

  But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)

  It will work.

  See attachments.

  My equipment list:

  Windows XP SP3

  LabVIEW 2011

  niDMM 3.0.5

  niDCpower 1.8

  PXI-1073 case with 2 cards.

  SLOT2: SMU-4141

  slot6: PXI-4071

  Could someone tell me the solution?

  Hi Peter,.

  The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device.  It is even for the Cal of NOR-DCPower function adjust a current measurement.

  You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.

  I'm not sure I understand your question very well.  Please let me know if I have not responded sufficiently.