resolution of surface-mounted

Similar Questions

• Surface Mount Test Points 2

  This test of surface mount point is on the bottom of the Board. I can't do a pad on the bottom layer sm. How can you put a component surface mount on the bottom of the Board in Ultiboard? I know how to do in many other programs, but I can't find a way to do it here. This must be done 140 times.

  Thanks for the help.

  Scotty544

  Select a part, not > swap

• test of surface mount points

  I have a hole in the 8 layer Board, I want to put buffers of type of mounting surface on the bottom to serve as a test for a part of a connector points 72-pin and a 68 IC pins. So far, I can't get the provided test to come at the bottom points, or they have pierced holes.

  Thanks for the help.

  Scotty544

  Hello

  You can create a new component with a single wafer SMT and use it as the test point.  You must add the testpoint in your schema as well because you need what it to be part of the netlist and also, if you annotate forward, and if the charge is not in the netlist, Ultiboard will remove Board.

• Resolution for Surface Pro 4 Flash

  Hello team Adobe Flash.

  I recently bought a 4 body of Microsoft Surface, and I thought it would be a fantastic tool to animate in flash with, given that you can draw directly on the screen that resembles a cintiq.

  When you use the flash, I noticed that the interface is very pixelated. I know that the SP4 screen has a high density of pixels, so it is quite difficult to use. Same drawing with the brush causes pixelated results, even if these are traits of vector.

  Y at - it all the graphics settings can remedy this? I can't find anything in the properties panel to do this.

  See you soon,.

  Jarrad

  I see the difference between ps and flash pro, but I don't see a significant problem of flash pro.  I know you might feel differently and can ask a sharper interface, feature request/Bug Report Form

• Surface-mounted with audio synchronized PluralEyes

  Hi - a bit of a newbie here... Please bear with me!

  Yesterday, I shot a few videos with a shotgun microphone from rode to the taking of microphone in camera on a Canon HFG30 set to use the external microphone of cameras to record.  This was sent by hdmi to the NInjaBlade.  I also recorded separately on a Zoom H6 recorder using the XY microphone.

  I used successfully PluralEyes to synchronize the audio tracks.

  I have 90 minutes of recordings and want to create subitems/clips that I can move me around, intersperse with another content etc.

  If PremPro subelements are the more useful approach, how can I get the synchronized sequence of master in the source window to create points of e/s that would allow me to create the subitems?  How can I associate the track synched Pluraleyes for the soundtrack of video/hdmi so that the IO brand clipping selects the external audio synched and includes it in the subitem?

  Or maybe there is a better way all together... or a method step by step to achieve this.  I guess I could use the blade on the main sequence, but that seems rather destructive and could limit my ability to re - edit trim positions.

  Any help/advice would be so appreciated.  Does anyone have a workflow that will allow them to share?

  Thank you very much

  Andrew

  Since nobody has jumped in to offer any assistance, I thought that it would be useful to other newbies like me to share my last two days of effort to try to come up with a workable workflow.

  So at the beginning, I got excited with the help of prelude to generate shorter clips that I knew that I would need the accumulated gross video.  So I opened each file in prelude, created for subitems along the timeline to match these areas, I want to save.  I then created a scripted, added the subelements, then exported the first edit to create a new folder of transcoded files.  Then, I took this clips folder and tried to sync it with the audio files using PluralEyes.

  It does not, because a lot of my clips were short (less than 5 seconds) and this inhibits the algorithm of PluralEyes to be able to find exact matches.

  Back to the drawing board!

  So I then synced all of the original video files (i.e. cut / edition) with the external audio using PluralEyes and it has exported to the output file standard .xml.

  I imported it directly in PremierPro and he gave me a long unique sequence that was all spaced appropriately along the timeline.

  Then the Epiphany... based on my knowledge of the use of assemblers of cinema to work!  The secret is to isolate and remove what you don't want, rather than trying to isolate and record what you want!  So, I went along the timeline creation of entry/exit points to cover the areas of junk.  And used the Extract tool to remove the unwanted stuff.  This resulted in a timeline of the individual clips with audio link internal and external to the video.  Because I didn't define the markes IO such as a few additional images were available at the beginning and end of each clip search, can I know enter each and refine the garnish on an image by image basis.

  Wow I did it!  I don't know that there are other, perhaps better ways to do this (it seems that Prempro always offers several ways to get to something!)... .but this workflow works for me and I will continue to use it until I could better!

  I hope it's a value for at least one other person there!

  Andrew

• How can I fix my resolution when it will automatically from high to low?

  Since I installed my touchsmart 610-1180qd I had problems with passing automatically to 640 x 480 resolution.  When I try to change the resolution in the Control Panel, the resolution button is not highlighted. I have to turn on my computer works to return to the initial setting high resolution. I called technical support 4 - 5 times all ready without solution. I'll give them another call, but if anyone knows what is the problem, I would appreciate your help.

  I also have the same problem with the resolution of the screen change after the mode 'sleep'.  After being unable to find a solution to the problem on the internet, I have played around with my settings and have found what seems to be a viable solution (at least for me).  I say this because I know that the issue is not yet resolved, but at least I found a way to keep my video resolution even after the return of the mode 'sleep'.  I have tested my 'solution' for the week past and have found that it works... until now.  So without further ADO, here is what I did:

  (This process which requires you to write your settings of resolution in a two steps)

  First of all, you need to open the 'NVIDIA control panel '.  This can be done by right-clicking on a any part of the homepage and selecting "NVIDIA control panel", or will the taskbar (next to the clock) and right click on the NVIDIA icon.  Once you are in the Control Panel, select "Change resolution" under the heading "display".  When everything is working properly, you will see your "recommended" setting, as well as all the other parameters available.  Then click on the 'Customize' button which will open a pop-up window.  In this window, click on the button 'Create Custom Resolution'.  This will bring up a context menu that allows to display all of your current settings (for example Horizontal pixels, vertical lines etc.).  There are 17 variables, you will need to register.  Once you have entered these parameters, you can put your computer in mode 'sleep' to activate the resolution problem.  For me, I had to wait some time before the issue of the resolution would surface (an indication that the problem occurred before even to see the screen was a sound the computer would just before you wake.)  It's the sound that makes Windows when you connect a usb device and windows detects it).

  Now that your screen resolution has changed (a very undesirable occurrence), you must make your way to the NVIDIA Control Panel.  It is extremely difficult due to the large size of the windows and such (I had to hide my taskbar automatically in order to access all the necessary buttons).  You will need to then press the button 'Customize' and 'create a custom resolution' button once more.  Once there, you can enter your 'custom' variables, even if they are the real '' recommended '' for your resolution settings.  (Tip: under the "calendar" section, you may need to move from "automatic" to "manual" in order to access the lower set of variables.)  Once you have finished, click on the 'test' button, and your resolution should be back to normal.  I think he will ask you if you want to preserve settings, and if they are to your satisfaction, then click Yes.  Once you have done this, it will save your settings 'customized', so that when your computer becomes crazy and changing your resolution again, it will be pushed to change for your custom configuration.

  Some things to note, you can't create and save a custom setting when your computer is not working properly because it will just tell you that it is a double parameter.  Your can only create and save the custom setting when the computer has been removed and all parameters available in addition to 640 x 480.  That's why you go through all the trouble in resolution 640 x 480.  That's what I did to make my computer 'Act' normal after the mode 'sleep'.  It has worked for me so far, but I know that the problem is still there because all the other resolutions are missing (next to 640 x 480 and my "custom" of the 1920 x 1080 resolution).  Of course once you restart your computer, all your choices of resolution will be back.

  If this does not work for you, I'm sorry.  I'm not an it expert by any means.  I couldn't stand having to restart my computer whenever he entered mode 'sleep'.  I am very disappointed that hp has not addressed this issue or have found a real solution to it, but at least I can leave my computer goes into sleep mode now.  I tried to be as detailed as possible in my explainantion of measures to take, but feel free to ask if you have any questions.   I'll try to clarify if I can, but as I said, I'm no computer expert, and I could not be able to answer your actual technical questions.

  Good luck to you all.

• Buying advice wanted: Surface Pro and Photoshop

  Hello

  I am looking to buy a laptop for College. As a user of Photoshop, it is important to me for my laptop to be fast enough to run Photoshop with ease. I've been watching the 3 Surface Pro, and I'd love to hear from someone who has had experience with her before. Of course, it's an experience incredible pen and it has great resolution and some hardware pretty serious packed in, but I'd like to hear from those who have actually used. I heard that the high resolution makes the user interface icons and very small items. I have young eyes, so I can deal with a few small, but how small is small? Can I get with an i5 model or I have to go for the i7 processor? I know there's an experimental feature in CC of Photoshop that allows you to increase the size of UI elements, there is a similar possibility for CS5? I heard that you can edit the configuration files in programs to achieve the desired increase. What's illegal/no possible with Photoshop?

  Any contribution is appreciated.

  Thank you!

  The surface Pro 3 is a great little portable machine.

  Photoshop IMO is not usable without being able to use shortcut keys, system on screen keyboards hack when he arrived at the use of short pieces. What is short to have to bring up a keyboard. use a shortcut by dismissing on screen keyboard.

  Even using CC 2014 2 x UI does not make Photoshop UI friendly touch.  With the keyboard attached using the pen is a bit compromised.

  With a Bluetooth device mouse Photoshop UI is small but usable in mode 1 x high resolution. The way I use it.  I found a utility button CAN touch interface usable design for use with Photoshop.

  I think that the resolution of Surface 3 pro 216ppi is usable with Photoshop, however with a Surface Pro 267ppi 4 display you would probably need to use cc 2014 2 x UI and winding up with less pixel because of the scale and then the Surface 3 pro using 1 x.

  Wacom Intuos Pro works well with the surface there is no need to cover your work with your hand or get fingerprints on it.  Your surface can also be use announces a second screen on your PC back in the dorm or at home.

  I I7 256 GB model, but I use it mainly as a third screen for a second view of the document that I am editing.

  X UI Photoshop CC 2014 1 and button interface which can be displayed/hidden power off when the stylus is close.

  

  On my Windows 10 workstation

  

• Time machine disk disappeared launching parallels

  Hello
  When I run the word on Windows 10 on 11 Parallels on my iMac, my Time Machine drive icon disappeared from my office. The time machine software stops the backup of my HD since the drive has disappeared.
  It reappears when parallels is closed and the smoking cessation.
  Why?
  What should I do in order to make parallel and time machine living peacefully side by side. Thanks and greetings
  https://www.dropbox.com/s/gy7li2b6eiu7e0y/Screen Shot 2016-04-25 to 18.47.20.png? = 0 dl

  Personally never used Parallels and there is not much for support information on their Web site.  Based on my experience with VirtualBox, surface-mounted disk in the virtual machine, it takes control of the host OS.  This is perhaps what is happening.

  This seems to be a relevant article in the Parallels knowledge base.

  http://KB.parallels.com/en/120389

• RN104 procedure to swap the attachment. #26221873

  Received a new box of RN 104 today after creating a ticket on the 22/12/2015 for lcd display digits turn white from the left of the screen. No instructions were given to me on how to do it. I guess I must first save the configurartion, which I just did. Then, turn off the worn device. Power of the new unit and update the firmware 6.1.4 the latest date on which my old unit is currently at. Once that is done, restore the backup of the configuration of this new unit. Turn off the power. Get the readers of old unit to the new unit. New unit of power. After the start, everything should be like before, right? Has anyone else had to do this? I also believe that I need to make sure that readers are implemented in the same way that they were in the old unit. Which means, from left to right, drive 0, 1, 2. Comments, help, suggestions are welcome!

  Jenn, I'll keep the handy FedEx tracking numbers on the table by the computer. Once he reached NetGear I'll put in a call to check that no charges were made on my credit card without my knowledge. Thanks for staying in touch here. Here are some pictures of my practical work yesterday. Gives you an idea of what is inside these cases.

  

  

  The defective LCD display module above and below.

  

  

  Take a look at this beautiful surface mount technology. Notice that there is a change of components in the next two close-ups.

  

  Note the components '4R7. It seems to be the coils or resistances. Can be a combination and a part of the power control.

  

  These look like metal and plastic covering the previous, or something. I just thought it was interesting.

  Hey, do you think that Netgear could use another repair tech? I work not expensive!

• Upgrade graphics card on laptop T400?

  Hello

  I wonder if it is possible to update the graphics card on my laptop T400. I opened the Device Manager, went to graphics cards, and it's a pretty weak (so I hear) Mobile Intel (r) 4 Series Express Chipset Family. I want to upgrade, because of different reasons. (Which sometimes includes having my computer 'black out' for a second, then say that one sort of thing screen failed but recovered and slow loading images/videos, etc., as well as the main problem of every time I load which is heavy graphics, either an assignment of imagery or a video game, I hear my computer to work extra hard and a 'click' sound comes from my computer that I think and I feel that it is because my) graphics card is "good enough", and I might as well update if possible).

  So yes, I was wondering if it is possible to update the graphics card on my laptop of Lenovo T400 and where to buy a new one (if possible).

  Thank you!

  "evening.

  in itself, there is no 'graphics card', in your machine. It's all surface mount, welded to the plane. even in the case of models that include switchable graphics, the discrete gpu is soldered (nested vs) to the plane. so, there is no update that way, sorry.

  Kind regards.

• Looking for spare part

  I have an AT-MIO-16DE-10, which has been damaged. A glance on the jury noted that the inductor "L4" has been broken, I wonder if there is a part number to replace this component.

  Yes, this is the part I thought it was.  Unsolder it and replace it with a short circuit.  If the Council is working in this State, you can replace the short with some UH inductance.  The damaged part is 3.9uH, and there is also room for a part by holes instead.  The part number for the option of through-hole is HCCC Fastron-3R6M-02.  The part of surface mount is Sumida CD43NP-3R9MC.  Any part similar to one who should work fine.

  IIRC, the benefit of the inductor is rather subtle. I think that it has reduced the amount of 250 kHz power supply noise on the analogue output.  So you should be fine without it.

  Chris

• S5120Y wiring diagram business Slimline

  I am repairing a HP Pavilion Slimline of S5120Y. I've been looking for a case wiring diagram Slimline help identify the correct façade component wiring to install on my card mother ASUS P5G41T-M LX Plus. I have the diagram for the motherboard but I assure you linking the son corectly to avoid damage to the Board or components.

  Someone has a link to it would be well appreciated.

  Your 4-pin Cable from the HP 6-in-1 reader is a USB 2.0 connection.
  WATCH POLARITY - POWER, GROUND.
  You can damage the motherboard USB IC, Surface Mount; OR 6-in-1 Reader.

  HP has a bad habit of using various DIY cable on their front panel wiring
  to support a variety of motherboards.
  Largely because of the lack of USB 2.0 on motherboard headers, there are a dozen years.

  * You must see their case computer a000 wiring! * (I have one, adaptation to the standards of Intel).
  ===
  The optical CD/DVD may be a LED or a simple switch. Was it connected initially to disk or motherboard?
  Are not supported on Asus motherboard...

• "Fan error" on T60

  So first of all, there is no dust and there is nothing to block the fan blades, so it should work fine. In addition, fan is tested outside the laptop on a different power source to make it work probably. But when I turn on the laptop the fan does not turn at all. Just shows BIOS splash screen and fan error and then turns off. There is no way it is the fan, because as I said I tried it and it worked on a different power source.

  Thanks for any help.

  You need equipment to work ion the surface mount fuses. I think a preheater of quartz and a station of rework at controlled temperature is the minimum required. I think that on this model, the designation is F4

• HP Designjet 110plus nr. Printer fails to power on when turned on

  I have try all these steps here and I see in photo 8 my green light is on what that means? supply of power gives power?. and how can I test my new offer the power used is working? I bought used original aliexpress... my conduit to the role of diet does not work and I buypass it afer put the power cable in ploter as see you in figure 6a and b.

  What test do I fint my problem if it is the Board of directors or power... or else

  I can't hear any sound such as fan or blink from the inside...

  video of ploter ploblem https://www.youtube.com/watch?v=jiJGRv7YKLY

  http://www.howtofixit.gr/Forum/showthread.php?t=67522 I try to fix it with internet... found .i burned rollfeed noise and a corrupt CRONOTERMOSTATO .i try to change it tomorrow and I'll see then... Sorry the forum is in greek

  I repair myself .with aid i forum http://www.howtofixit.gr/forum/showthread.php?t=67522&page=2 ... .the first problem with fuse t800ma I have change and it works and the second s468a of CRONOTERMOSTATO of Burn and replace it with Surface Mount Schottky Barrier Rectifier

  sb040
  1N5819
  +
  +

  Foto and video how to solve this problem in http://www.howtofixit.gr/forum/showthread.php?t=67522

• How to get a newer video card?

  Please help me my computer does not support certain videos as screensaver, some movement, internet cards.

  The video is not the cause of the failure to screen saver. and your other elements relate to confused. What do you mean by "certain move" and "internet cards?  What specific problems are you having?

  In general, in a desktop a updated video card can be installed in the proper slot (most often a PCI Express 16 slot on new computers).  Most laptops do not upgrade the video material which is a chip on the motherboard surface mount.  (There are a few rare exceptions with machines high-end multi media, but rare).