Trying to Hard reset Palm Treo 500v

Similar Questions

• Restoration of hotsync after Hard Reset Palm Centro

  Hello

  My Palm Centro was freezing randomly and in particular whenever someone called me. As this was very annoying, I performed a Hard Reset of the device. Before I did I did a Hotsync to back up everything (or so I thought).

  Now when I do another hotsync after Hard Reset nothing is restored, the only things on the device that were there before are the photos that were on the memory card. All my Contacts, phone numbers, notes, calendar entries and everything disappeared. How can I restore them?

  EDIT: Ive since found all my contacts, calendar entries, memos, etc. in the application of "Palm Desktop" in Windows XP. How to I move from the computer on the Palm Centro?

  -Aussieguy

  When you hotsync it will ask for a user name, be they existing or invites you to create a new.

  you remember what username you assigned when you do the front hotsync.

  You also said that you can see your information in palm desktop, check the user name in the upper right corner where you see the user name.

  regardless of the user name displayed in the area where you can also see your data, this is the username correct to decide when you hotsync.

  now, your device is empty so kindly do the hard reset on it and then try to hotsync, but this time, you should be able to know what username to choose.

  Message is about: Treo 680 (unlocked GSM)

• Hard Reset damaged Treo 680?

  Some time ago I've nailed my Treo 680 mounted belt on a sharp angle, causing the key 5-way such as the 'up' command is no longer available. I have now changed to a replacement of 680 and want to erase everything from the original before disposing of it, but of course, ordering "mounted", what confirms the deletion of all data during the procedure to hard reset!

  Does anyone know of another way to do a hard reset which does not have this command? Any other suggestions to clean all personal data?

  Thank you, Chris.

  Hello and welcome to the forums of Palm.

  You can download the HARDRESET program from www.palmpowerups.com. This program will be hard reset of your device as soon as you click on it - it will give you 10 seconds to press a button to cancel the hard reset. After 10 seconds, you must perform a soft reset of your device (remove the battery and then put it again) to complete the hard reset.

  I hope this has been helpful!

  Message relates to: None

• 17 - k250CA: HP won't turn on, tried the Hard Reset still nothing system is 9 months old

  Afternoon in the hope of getting assistance, I tried to call tech support 4 times they keep telling me they ship me a box to send them back up after fustrating many hours and days away I decided to reach out to see if there is something, someone can help me with this

  System ran great the next morning about 2 months ago, the computer turned off just when I go to re start it I get no respone so I have some research the other night on a HARD RESET I finished it now when I press the power button system starts then shows the HP screen and stops just out of luck and more now he lights Please note that in this case the led turns off even when the charger is always plugged

  If I unplug the charger and plug it back I will get the led on the demonstration we have power/charging with a orange place any help would be great I have I need this for my school project due and I spend a lot of money on this computer and the fact that technical support phone call to give me same run me tracking code so that it shows waiting for microphone and HP still 2 months now I just need this work yet once

  Hi @BigDanPtbo,

  I've increased your question to the appropriate team.
  
  Please take a moment to read the HP privacy policy at http://www8.hp.com/us/en/privacy/ww-privacy.html

  Please let me know if this help solve the problem by marking this post as accept as a Solution.

  Thank you.

• hard reset my treo, stuck b/c touch screen is broken!

  Hard reset my device forget that to get it going again, I had to go through the stage 'Please touch the screen with your stylus' things.

  Screen on my device has long been dysfunctional, I was doing around the use of scrolling.

  Is it possible to use the buttons to go beyond this screen, so I can use my phone as before?

  Any suggestion would be appreciated!

  Thank you!

  Seem to have it fixed, yay!

  Did a 'hot' reset and it happens again.
  Now the sync to put all my data back to this topic.

  Greatly relieved!

• OfficeJet Pro 8620: Officejet Pro 8620 won't copy. Tried the hard reset suggested in the forum.

  Won't copy even if she looks like her do something. Error message reported that incorrect paper size has been used. All other functions seem fine. Just bought.

  Odd. If it was the lamp of the scanner, it would happen, but you wouldn't be able to scan. If it was the print head removes you from the copy of the blank pages and not be able to print. It's really a weird question. I sent you something to try out via private message.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If the steps I sent do not resolve the problem, it will be best to reach out to the hotline. They may have additional options.

  www.HP.com/contacthp/

• Sync Outlook 07 for Palm Treo 650 Sync Conduit product Contacts DUPLICATES in Outlook... Help!

  I downloaded the Palm sync Conduit, linked a Treo 650 sync with Outlook 2007 (Vista 32) and it created duplicates for most of my CONTACTS in Outlook 07, not all but most, weird.

  Treo 650 (Cingular) - (Palm Desktop 6.2) - Outlook 2007 (Office 2007) - PC Dual Core Vista Edition Home Premium

  Can someone help get Sync Palm leads do not create DUP? I deleted everything and tried twice. There are no duplicates in the Treo or office, never had a problem syncing Palm Desktop, only Outlook (I'm converting Windows Mail to Outlook)

  Thank you

  Smitty 631-345-0000

  The hotsync Manager create you any duplicates.

  Clean the database of contacts in Outlook, you need hard reset your Treo, set the desktop hotsync conduits replaces handheld and then synchronize.

  Click on the following link for the Web page of kb.palm.com for the article about reset procedures.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=887

  There is a 3rd party app that will remove duplicates in Outlook.

  Here is the link to the site; http://www.MAPILab.com/Outlook/remove_duplicates/

  One thing that you may not be aware is that Palm desktop 6.2 lines already installed Outlook 2007, there is no need to install the update for Outlook 2007 lines.

  You can remove the update 2007 conduit using the control panel.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Treo/650/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Stream laptop HP 13: hard reset HDMI.

  Hello
  I recently broke my screen so I use a screen tv with an HDMI cable. I was doing a PowerPoint presentation and then it froze so I restarted my laptop, but when I went to turn it back on the screen remains empty, but it lights up. I tried the hard reset on the phone, but I do not see it in the HDMI TV screen. And I was wondering if there is a way to get everything back operational again? Thank you.

  Hello
  Sorry I just sort all thank you.

• HP 6810us laptop does not start. Hard reset does not

  Hi people,

  Need your help. My HP dv6810us notebook is not initialized. I tried the hard reset as suggested in these forums, but his does not work. Would appreciate if you can let me know of other options.

  Its no more warranty and HP directed me on these forums. My OS is windows vista.  I can go well in the system implementation (F10).

  I would like to know what are my next steps? Start the laptop?.

  Thank you

  Milind

  Hello

  You are welcome

  You can create a bootable copy of Ubuntu on a USB - just follow the guide here.

  Kind regards

  DP - K

• Dell XPS 12 - will not start / turns on after hard reset

  Last night I was with my XPS w12 in laptop mode on battery and he finally went down to 7% of the capacity.  At this point, it turns off the display and I moved my office to connect the power adapter (thinking it would simply turn the display when there was enough power...  The screen never came back (I waited 15-20 minutes), but the battery has been recharged.  At that time, I tried a hard reset by holding the power button for 5 to 10 seconds.

  When I tried to turn it on, nothing happened.  No backlit keyboard, no screen, just the fan.  The light never came the switch either. So I tried an another hard reset with the same results.  I even tried to turn it on with the "D" button held down for on board diagnostics and got nothing more than the start of the fan.

  I thought it might be an overheating problem, so I let it set for an hour and tried again - none other than the fan. It seems that the laptop does not pass the initial diagnosis and not even up to the point where the bios starts to load.

  I really thought that my cell phone was dead and ready for use.  I took it in the office the next day so I could call Dell Support Pro. Just for fun, I plugged with the AC adapter and tried to turn it on - viola!  It started working again.

  I had this problem once before, and he began to work after 2-3 resets hard. I was working on a proposal when the laptop went down. I tried reset hard over a period of 4 hours with no result. It baffles me why it start OK the next day morning.

  I was wondering if anyone else has had the same problem.  I am running the A07 BIOS (the most common) and my 12 XPS is configured with 8 GB of memory and 256 GB SSD with an i7 and Intel wireless card.

  Any suggestions on this diagnosis? The hardest part is then if fails, the failure is total - you are unable to diagnosis. When she comes back, all right, and there is than any event in the event log that relate to the failure.

  OK - I narrowed down it to the following:

  When the laptop is "asleep", it will finally in power mode. It seems that connect a power adapter for the laptop at this point will enter a State of confusion, when the button is pressed, the laptop fan turns on but no light on the power button or on the keyboard – the screen remains blank.  Laptop fan works (it is very quiet - he must hold the phone to your ear to hear it).

  I don't know if the cause is a low battery or if the issue is simply with the State of the CPU to power down.  All I know is that when it happens, if I disconnect the power adapter and press and hold the power button until the fan of the laptop turns off, the hard reset allows him to come back normally.  If you leave the adapter attached, it will charge the battery but will not allow the laptop start.

  I said this experiment several times with the same result every time. I'm guessing that there is a bug in the BIOS that defines an error state that are resolved with the associated power Board. Do the hard reset without the adapter seems reliable to fix the problem.

• Hard Reset Treo 650

  How to hard reset my palm treo 650, I watched the palm support pages but couldn't find something that says how to do a hard reset...

  How about this article?

  http://KB.Palm.com/wps/portal/KB/common/article/887_en.html

  WyreNut

• Replacement Palm TX has problems white screen even after hard reset

  I hope someone can help me find a solution.

  I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

  It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

  I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

  I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

  Does anyone have a suggestion?

  Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

  Message edited by Damien on 06/30/2009 08:24

• Does hard reset wiping all software on Palm Zire 31?

  I was given the device by a student who was more useful.  I would like to delete a software called CompTracker but also to clear the calendar, etc., while not losing do not have any other software again on the device.  How can I do this?

  Hello and welcome to the Community Forums of Palm.

  A hard reset will be wipe everything clean, all the data and applications and leave you with just the built-in apps that come preinstalled.  The Zire 31 has also come with additional third-party software (see below) on the installation disc.  If you hard reset the device without first HotSync on your computer, you will lose these third party apps, unless you also have the original disc and any other person that the previous owner had installed as well.

  You can first install Palm Desktop on your computer, then sync.  HotSync must recognize the Hotsync ID existing on the device and create this ID on your computer, then save all applications and data to your desktop.

  Then you can Hard Reset the device and Hotsync again.  This time, when it asks you what Hotsync ID to use, create a new one for yourself.  Later, you can go in Palm files on your desktop (c > program files > palm) and look for the user folders.  There's one for the old ID Hotsync, and one for the other, you just created, they'll folder names that will resemble the Hotsync ID somehow, perhaps an abbreviation or combination of initials.  In the previous user folder, locate the backup folder.  Which will house all the third-party applications that were previously installed.  You can double click on those you want to restore.

  [NOTE: many commercial third parties applications require a registration or activation code in order to work beyond the trial period.]  [These activation codes are generated based on the unique Hotsync ID of the device, which means that if the previous owner purchased the software that you want to continue to use, you will not be able to do it with a new Hotsync ID... you could use existing ID the device]

  Message relates to: Centro (AT & T)

• How can I perform a hard reset on a Palm Centro?

  I installed a third party-thrower and want it removed, and I don't know how. If there is another way to take off this launcher, could you tell me? If this isn't the case, I need instructions for a Hard Reset.

  Thank you

  Ramiro.

  Nevermind, I found the answer. Thanks to all those who were getting ready to answer!

  Message relates to: Centro (Sprint)

• Language settings for PALM TREO PRO 850

  My PALM TREO PRO 850 has a Chinese (I think) Tools menu in the settings window.  Does anyone have a map of the site for this Tools menu, or you know a way to change the language.  I tried various resets hard.

  Hello

  I would contact your phone support site and check if it helps:

  http://KB.hpwebos.com/wps/portal/KB2/na/Treo/T850/unlocked/supportservices/page_en.html