Window not finding touch pad

Similar Questions

• Stream laptop HP 11: after the update of windows 8.1 Windows 10, the touch pad does not work

  My Hp Notebook PC 11 Stream works fine on Windows 8, 1 until I updated to windows 10. Now the touchpad is dead. I have to use a USB mouse.  In Device Manager, all the drivers work fine. Any clue?

  Thank you for visiting the Forums HP's Support and welcome.

  Information below can help you

  Make sure your keyboard is on

  Check in the settings 'Mouse & touchpad' to ensure that the touchpad is enabled.

  Open the Settings menu (Start > settings) and go to devices > Mouse & touchpad. Scroll to the bottom of the screen, and then click additional mouse options.

  The mouse properties window opens. Click on the tab more far to the right (it may be called MOMENTUM ordevice settings). Under devices make sure your keyboard is not disabled. If it is disabled, click on the touch pad to select, and then click Activate.

  Another thing to try is to see if your laptop has a function button that enables / disables the touchpad. It should look like a tiny touchpad with a diagonal line through it (on my computer laptop is F6, on other laptops we Fn + F5, Fn + F6 , or something else entirely). Try to switch this key if you have before you panic on the misfortunes of possible touchpad.

  Update your drivers

  Windows 10 has been out for a few months now, and most of the manufacturers of touchpad have updated their drivers accordingly. But you may need to manually update your driver.

  There are two ways to do this. First, click on the Start button and select Control Panel. In the Control Panel window, open the Device Manager.

  By clicking on "update driver software... "will your computer Internet search for an updated driver.

  Best regards;

  Marcel

  I am an employee of HP

  Please click the White Star Kudos to say thank you for helping.

  Please check accept as Solution if my help has solved your problem.

• Acer Aspire TimelineX 3820 t - Windows Update - Synaptics Touch Pad conflict

  Hello

  I just bought an Acer Aspire TimelineX, 3820 T. It's like a Synaptics Touchpad, which works fine until I do a Windows Update. Once I do the update of Windows, the touch pad doesn't work. Even if it works, there is no control over the touchpad. It is an old laptop of the week and I won't send it to Service Center for repair. Also, I'm afraid to get Exchange of the same model, since it is a software problem with Windows update and could be the same thing with another of the same model. I disabled the Windows Update and there is no problem since then. But with the new laptop, I cannot deal with Windows update and will be updated soon.

  Help, please!

  Welcome & thank you for your comments but I said nothing about disabling the automatic update from Windows Update.

  See...

  Understand the automatic Windows Update
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  [Maybe you want to disable the automatic installation of the driver & other option updates or maybe just change the way which THE supply & install updates by my previous answer?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update Windows not finding updates/East remained after fresh installation of win 7 pro on the laptop of dell d610 32bits.

  Hello

  I have recently re - installed win 7 pro on a 32-bit computer laptop dell d610 and after installing some updates it now just says: "check for updates...". "on the windows update screen and the green light just continues to go everywhere for centuries if I leave.

  I have also no wireless connection just a wireframe.

  I've added a certain drivers from the dell website including an update of the BIOS.

  When Windows 7 was installed it has 4 drivers problems / missing in the Device Manager and since the update of dell, there are now 2 problems with

  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family and the controller of the network if I thought I had added the driver for this.

  I tried to use them, but they make no difference:

  WindowsUpdateAgent-7, 6 - x 86 (I also tried to install an equivalent standalone update for it and he says just looking for updates on this computer and also keeps going and going)

  WindowsUpdateDiagnostic

  MicrosoftEasyFix50202

  MicrosoftEasyFix20179.mini

  tweaking .com - reset the registry permissions

  Its a genuine product key as it turned on and I think that sp1 is built in otherwise it wouldn't activate.

  I tried to solve this for a week now without success any help would be really appreciated.

  Thank you very much

  Craig

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

• Where can I find touch pad drivers for Satellite A300?

  Where can I find drivers for Toshiba A300 Touchpad?

  Help, please.

  Hello

  See the page of the European driver Toshiba:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Welcome them

• Satellite click L30W 2-B - Touch Pad doesn't work

  Hello

  When I connect to my computer, after a few minutes y touch pad works, the system tray icon has a red x through it, and if I go to properties it is not my touch pad, but he said any other device. I updated the driver for touchpad without result

  Are you using the original pre-installed version of Win8.1 that you got with your machine?

• Satellite C50D - B - 11 X - touch pad does not work

  Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

  Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

  I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

  After removing the touchpad driver, please restart the system.

• HP PAVILION DV7 4045ea touch pad not working not

  Hello world

  Can someone help me, I am running windows 7 64 bit on this machine, I've only had the computer a few days and the touch pad does not work. I know that the material is ok because I downloaded the Synaptics site driver, but windows seems to lose it when I turn it off? Did anyone had this problem if so can help you.

  Thank you very much

  TOPO

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Reboot the laptop.

  Now reinstall the synaptics driver and when you are done, reboot the laptop again.  If during the reboot, the driver was deserted again, from windows control panel, open Device Manager and open to mice and other pointing devices, right-click on your Touchpad device and select uninstall.  Once done, reboot once again and see if Windows will find the device and install the appropriate driver.

  Kind regards

  DP - K

• touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

  touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

  Hello

  It's material is not a Windows problems.

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
  is a toggle the TouchPad that it is enabled.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
  only once if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP 15 ab019na: clicking on the touch pad does not work

  My laptop newly purchased has just been upgraded to Windows 10. My problem is with the touch-pad. Clicking on most of the things with it (left or right) turn simply on the element, but it does not open the item. For example, the cross that appears in the top right, to a screen, to cancel this screen does not when you click on it. I have to touch it with my finger so he could work (the laptop's touch). A lot of hypertext links do not open when you click on it, but their contact works. The Start button at the bottom left does not open when you click on it, but it's when they are affected.

  Clicking is sometimes more convenient than touch, so I would if the issue is resolved.

  Hello @Gallant,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the TouchPad and wanted to help you!

  Please consult the following document and let me know how it goes:

  HP Notebook PC - using the touchpad and ClickPad (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Kind regards!

• Touch pad to turn off Windows 7 when the mouse remotely installed as I could in Windows XP

  In Windows XP, I could go to control pannel, mouse and click to Disable Touchpad when another mouse was attached.  It would be automatically on the touch pad if no mouse was attached USB.  I couldn't locate any method or the answer that allowed a change of software touchpad in Windows 7.

  I had an old Dell D820, installed Win7 and couldn't find a way to disable the touchpad and keys/stick.  Based on other suggestions, I went to the Dell website and downloaded the drivers Vista (Win7 drivers not available).  As soon as he installed and rebooted, I had an icon in the Sys Tray (by the clock) that I could then select a setting to turn off when the external mouse connected.  So for those who said it is a pilot thing, I agree with them.

• Portege R930 - Touch Pad on / off button does not work

  Hello

  R930 nine (PT330A) and a minor but annoying thing... the small button above the touch pad and below the space bar for the Touch Pad on / off does not work. I can't find the configuration options for this anywhere. Fn + F9 works very well.

  Not much, but I like things to work! And this button would be very convenient for a quick switch.

  Thank you
  Mark

  Can you use the Toshiba? I think you should have the button eco and presentation on this machine.

  Check please if you can enable/disable these keys in the HWsetup tool.
  I don t have Win8 machine, but I think that all these buttons can be enabled/disabled.

  Please, check and send comments.

• Portege R700 - Touch Pad, ecoUtility and presentation of the key does not

  Hello

  I got a Portege R700 with Windows 7 64 bit.
  This machine starts very slowly after the log in user mode only.
  The system is waiting for 1 to 2 Minutes before you can work. In administrator mode erverything is fine and fast.

  Thus our directors thought it might be the Toshiba Software and a lot has been disabled or uninstalled.
  Because this did not help and because I thought that it migt be cause of Kaspersky, I started to reinstalled and update the software from Toshiba. Most of it works now. Shortcut keys does not work, then I start TfcRst.exe via autostart now, even he would somehow it would be better in 'systemecommencent '.

  But still some keys do not work. The Tablet touch power switch, just above the touch pad does not work.
  The Fn F9 works. And the two keys to the right upper corner (ecoUtility/off button and the presentation-Key) do not work. In all three major, I get a pop up saying "this function not taken in charge.

  Anyone has any idea of this?

  Thank you

  Solomon_de

  Hello

  Why you n t try to restore the operating system back to the same state until the administrator has removed or uninstalled the Toshiba Software?

  Generally speaking the VAP (value added package) controls the multimedia keys.
  Also the FN keys require the VAP and Flash memory card Support utility.

  Welcome them

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Tecra A9 - sometimes I can not type - click using the touch pad

  There are times that I can not type - click using the touch pad or other keys (all of a sudden without any reason)

  I can move the cursor in this case but not tap - click here to be able to click once again, I have to restart (this happens on both windows and linux)

  On windows, I press alt + ctrl + del and when the Task Manager window I can tap it and after I do I can tap - Select something else and so on.
  Click on the Task Manager click on anything else until I reboot and the problem goes away just to appear suddenly unexpectadly at the same time.

  I have the newest bios and driver accupoint

  Any tips?

  This happens only with touchpad, or when you use an external USB mouse?
  For me it looks more like the Windows operating system freezes for a short period. Is this good?