Restoration of Windows 10 stuck to "restart".

Similar Questions

• Windows 7 stuck on the installation of the updates after the testore system

  HP Paviluon g7 1322nr Notebook PC

  Had to perform system restore, now Windows is stuck on installing update 3 of 177.  That is for more than one hour.

  In this case, run the tool in troubleshooting Windows Update from the link below and see if it works:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If the problem persists, reset your Windows Update components by following the instructions mentioned on the link below and try to download the updates again:
  https://support.Microsoft.com/en-us/KB/971058

  If the problem is still not resolved, run the system update readiness tool from the link below and see if it works:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Hope this will help you.

• Cannot restart; Function F8 does not work; stuck at "restart windows." Put in standby mode.

  Put the PC into standby mode.  Stuck in the status of "Recovery of Windows".  Impossible to restart.  Power off several times.  F8 doesn't work no more.

  I don't think that XP shows a message "Windows Recovery" when it comes out of Stand By.

  It does when it's Hibernation.

  If you've been cycling power, you can have damaged your system files a bit and should probably start by running a chkdsk/r from the XP Recovery Console.

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• restore the windows available

  I went to one of my FCPX library and deleted some files. Also, I took all my FCPX libraries and place them in a folder. Something tells me that it is a 'no-no' because after my FCPX started acting weird. Then when you restart my FCPX he stuck to "restore the window layout" and a gray screen. I found the support page for this particular problem, but I can't find 'library' in my menu 'go '. Can someone help me?

  I was opening a backup library - usually located in the folder of Final Cut backups in movies.

  Russ

• When I try to compose an email, simply consist of window icon stuck in the taskbar windows cannot really expand and use it

  OK, the details of installation below, so when I try to compose an email, I just get a new message window icon stuck in windows
  taskbar cannot really expand and use it. If I reboot in safe mode with all the addons disabled, then it works fine. But
  If I restart normally and manually disable addons/plugins, then close and restart normally IE mode unsecured, it
  breaks, so doesn't seem to be an addon or plugin, but rather something with the configuration.

  Application Basics
  

  Name Thunderbird
  Version 31.6.0
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
  Profile folder
  See file
  (Local disk)
  Application version identifier 20150330093429
  Permit Plugins about: plugins
  Build configuration about: buildconfig
  Memory usage on: memory
  Mail and News accounts
  Outgoing server ID incoming servers
  Connection security name authentication security name connection default authentication method?
  Account2 (no) plain passwordCleartext of local records
  account3 (nntp) news.mozilla.org:119 passwordCleartext plain stbeehive.oracle.com:465 SSL passwordCleartext set to true
  account5 (imap) stbeehive.oracle.com:993 SSL stbeehive.oracle.com:465 SSL passwordCleartext true passwordCleartext
  Incident reports
  ID of the report
  BP-0a8986d2-ff0c-41C3-9da6-e770e2141224 24/12/2014
  BP-01f44ba7-3143-4452-AC98-981b62140123 23/01/2014
  Extensions
  Name enabled Version ID
  British English Dictionary 1.19.1 false [email protected]
  3.3.3 lightning {e2fda1a4-762b-4020-b5ad-a41df1933103} false
  Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
  Important change preferences
  Value name
  accessibility.typeaheadfind.flashBar 0
  Browser.cache.Disk.Capacity 358400
  Browser.cache.Disk.smart_size_cached_value 358400
  Fake Browser.cache.Disk.smart_size.first_run
  Fake Browser.cache.Disk.smart_size.use_old_max
  extensions.lastAppVersion 31.6.0
  fake font.internaluseonly.Changed
  make. Name.monospace.El Consolas
  font.name.monospace.tr Consolas
  make. Name.monospace.x - baltic Consolas
  make. Name.monospace.x - Central-euro Consolas
  make. Name.monospace.x - cyrillic Consolas
  make. Name.monospace.x - unicode Consolas
  make. Name.monospace.x - West Consolas
  make. Name.sans - serif.el Calibri
  font.name.sans - serif.tr Calibri
  make. Name.sans - serif.x - Baltic Calibri
  make. Name.sans - serif.x - Central-euro Calibri
  make. Name.sans - serif.x - cyrillic Calibri
  make. Name.sans - serif.x - unicode Calibri
  make. Name.sans - serif.x - western Calibri
  make. Name.Serif.El Cambria
  font.name.serif.tr Cambria
  make. Name.Serif.x - baltic Cambria
  make. Name.Serif.x - Central-euro Cambria
  make. Name.Serif.x - cyrillic Cambria
  make. Name.Serif.x - unicode Cambria
  make. Name.Serif.x - West Cambria
  make. Size.Fixed.El 14
  font.size.fixed.tr 14
  14 are. Size.Fixed.x - Baltic
  make. Size.Fixed.x - Central-euro 14
  14 are. Size.Fixed.x - cyrillic
  make. Size.Fixed.x - unicode 14
  14 are. Size.Fixed.x - West
  make. Size.variable.El 17
  font.size.variable.tr 17
  17 do. Size.variable.x - Baltic
  make. Size.variable.x - Central-euro 17
  17 do. Size.variable.x - cyrillic
  make. Size.variable.x - unicode 17
  17 do. Size.variable.x - West
  gfx.blacklist.Suggested - driver-version 257.21
  mail.openMessageBehavior.version 1
  true mail.winsearch.firstRunDone
  mailnews. Database.global.datastore.ID 8 d 997817 CEE1-4f16-aa36-008d5baeb30
  Mailnews. Fake Database.global.indexer.Enabled
  true network.cookie.prefsMigrated
  Network.TCP.sendbuffer 65536
  places.database.lastMaintenance 1429004341
  places. History.expiration.transient_current_max_pages 78789
  plugin.disable_full_page_plugin_for_types application/pdf
  true plugin.importedState
  plugin. State.Flash 0
  plugin. State.Java 0
  plugin. State.np32dsw 0
  plugin. State.npatgpc 0
  plugin. State.npctrl 0
  plugin. State.npdeployjava 0
  plugin. State.npfoxitreaderplugin 0
  plugin. State.npgeplugin 0
  plugin. State.npgoogleupdate 0
  plugin. State.npitunes 0
  plugin. State.npoff 0
  plugin. State.npqtplugin 0
  plugin. State.nprlsecurepluginlayer 0
  plugin. State.npunity3d 0
  plugin. State.npwatweb 0
  plugin. State.npwlpg 0
  true plugins.update.notifyUser
  Graphics
  Adapter Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Fake license DirectWrite (6.2.9200.16571)
  Gamma settings ClearType: 2200 Pixel Structure: R
  WebGL Renderer blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  GPU accelerated Windows 0. Blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Skiing AzureCanvasBackend
  AzureSkiaAccelerated 0
  AzureFallbackCanvasBackend Cairo
  AzureContentBackend Cairo
  JavaScript
  Incremental GC 1
  Accessibility
  0 Active
  Prevent accessibility 0
  Versions of the library
  Minimum version expected Version in use
  NSPR 4.10.6 4.10.6
  NSS 3.16.2.3 ECC base 3.16.2.3 base ECC
  Util NSS 3.16.2.3 3.16.2.3
  NSS SSL 3.16.2.3 ECC base 3.16.2.3 base ECC
  S/MIME 3.16.2.3 NSS ECC base 3.16.2.3 base ECC

  Noticed in the information provided:
  Graphics adapt Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver.
  Try to update your driver graphics version 257.21 or newer.

  You can update your graphics driver and retest.

• Satellite P850 - Windows 8 will not restart properly

  Does anyone know why Windows 8 will not restart correctly on the laptop Satellite P850?

  It seems that whenever I have to restart, especially after the installation of an update, it crashes right on the screen of "Reboot" and I usually find myself having to hold the power button down to completely stop and then turn upwards again. Sometimes, I still have to do to make it stop.

  I would be very grateful for any help that anyone can give me please.

  I have no idea why the Windows 8 will not restart correctly, but this document should help you to repair or restore the system of Windows 8 on your Satellite P850

  + Windows 8 recovery & Repair +.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Please post comments if this helped and how you can solve this problem!

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• END OF RESTORATION OF WINDOWS NEVER

  Ive tried to run a restore of windows 2 times because none of my shortcuts work and none of my downloads are finished, not even google chrome... what should I do? I have Windows Vista.

  Ive tried to run a restore of windows 2 times because none of my shortcuts work and none of my downloads are finished, not even google chrome... what should I do? I have Windows Vista.

  What is "restore windows ?

  Do you actually mean the System restore?
  If Yes, do it again in Safe Mode >
  Here's how to go in safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.

  Here's how the system restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows vista stuck in mode hibernation, then received error/BOOT/BCD file.

  Windows vista stuck in mode hibernation, then received file error/BOOT/BCD, Oxc000014c of the State. I inserted the Windows Vista disc to plant but it goes back to the previous message.

  Hello

  Turn off the computer if it has not been extinguished because it started and wait 5 minutes so there
  is a complete reset of the material.

  See if this applies:

  Error message when you resume a Windows Vista Service Pack 1 or Windows Server-based
  2008-based computer after hibernation: "Windows failed to Start.
  http://support.Microsoft.com/kb/95752

  ----------------------------------------------------------------------------------------------------------

  More troubleshooting:

  / Settings (BIOS/CMOS) often F2 so watch the screen as it starts - set boot order for
  1 CD/DVD so it can boot the disk - you don't want to not install Windows - you want to repair.
  Don't forget to put it on hard drive first of all when you do not want to start on the DVD.

  Try the Startup Repair tool

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  ----------------------------------------------------

  If the above didn't help:

  At the prompt of the startup disk:

  Bootrec /fixmbr

  then

  Bootrec /fixboot

  See if you can boot from the hard disk

  If this isn't the case, restart on Windows drive:

  At the prompt of the startup disk:

  CHKDSK C: /f /r

  ----------------------------------------------------

  If necessary this 'peut' help: (not the same error however it may be useful)

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  ==============================================================

  If no help, the assistance of a computer store real (not the leeks and glances at a Best Buy or another Big
  Box stores) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Updates Windows 7 - stuck on 'check updates'...

  I have a HP desktop computer.  Running Windows 7 Home Premium.  Recently upgraded to the 10 Windows (while it was free).  Discovered that even after the analysis of compatibility says 'OK' I had to call Microsoft for more help and told me that my computer was not compatible.  Asked why the analysis said it was.  No real answer not followed.  Little has been said to restore to Windows 7.  After that I have known issues.  Before the update of window 10, this computer has been running great!

  in any case, I noticed recently that my computer is not updated.  When I go on ' check for updates ', it just stays on that.  The status bar does not move, but just on the 'check updates' for days.  The only way to stop it is to restart the computer.  But I know there are updates because my other computer is up-to-date (did not upgrade Windows 10 - but is currently running Windows 7).  So, I have sen the videos and articles on remove and clean up the folder "Software Distribution".  I did it several times and it DOESN'T WORK.  At one point, I decided to do a factory restore.  Took the computer to update 1.  At ran Windows Update and found 16 available updates and other things to seem to be good.  But noticed once the "Service Pack 1" has been downloaded and installed the Windows Update is blocked again.  So, I'm lost here.  What can I do?  Is there a solution?  Or should I trash this computer and buy a MAC?  Questions please ask.

  Help, please... Thank you!

  See this thread and perform the steps exactly.  I did the following steps on several computers and they work.

  Windows Update solution

• Windows Update stuck at 'Check updates'

  Original title: Windows Update stuck

  I had to recover my laptop windows 7 back to out-of-box state system. Once presented to my office, I immediately went to Windows Update to install all of the updates that I needed. After installing SP1, and restart the computer, windows update to update the update agent, so he could get some more updates. He said he would close and re - open Windows Update, which she did, but now it is stuck on "check updates".

  The update that broke the update of Windows was "Windows Update Agent 7.6.7600.320"

  I have since made a recovery of the system to the State out-of-box three times and each time "Windows Update Agent 7.6.7600.320" installs Windows Update is stuck saying "check updates".

  I did tons of attempts to solve this problem, but it won't find more updates and I can't install more updates.

  I have also experienced problems with Windows Update still looking for updates when Windows Update 7.6.7600.320 has been installed automatically after the system update to SP1 (it was after doing a clean install of Windows 7).

  The following worked for me:

  1. manually installing KB3083710

  2. manually installing KB3102810

  3. restart the computer

  4. run the Windows Update Diagnostic tool to reset Windows Update (support.microsoft.com/en-us/kb/971058)

  5 restart the computer again and search for updates

• HP Windows 7 stuck in a reboot loop

  Hi all

  Recently, I accidentally upgraded my HP Envy 14 from Windows 7 to Windows 10 and let the month pass without switch back.  Due to one host of other problems that have arisen, I decided to Windows 7, so I took out my old Windows 7 recovery disc to re-install Windows 7.

  He successfully reformats the hard drive and everything seems to go well until the end of the installation, when all of a sudden it shuts off and restarts.  He will then get as far as the 'starting windows' screen before it restarts again, each time giving to the screen "Windows is not stopped successfully", is not just a part of the installation process.  He's stuck in this reboot loop.

  Any advice?

  Couple comments:

  I have created a startup repair disk and ran the Startup Repair, but he reported having found no problem.  Very well.

  When you try to start the computer in safe mode, I get to the screen "Windows is set up your computer for first use" and then informs me that Windows cannot complete the installation in safe mode.  He gets up to now in normal mode, however.

  The battery is thus burned - can install Windows on a computer that has failed the test of the battery?  I don't see how there would be a relationship, but I'm really running out of ideas.

  Thanks for any help/insight you have!

  Eventually the recovery disc files are corrupted, try the following:

  Download Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Updates Windows 7 stuck in verification mode

  After a dismal upgrading to W10, I decided to restore on W7.  Everything is fine, but updates are glued to the verification mode.  I waited hours, tried tools, checked computer files for corruption, the FixIt Windows thingy... nothing worked.  I can't try a bunch of command prompts or removing and reinstalling stuff more things.  Someone has another help or am I screwed because Microsoft deliberately sabotaging W7?  Frustrated!   Thank you.

  You have two options here.

  Option 1 - use a guide to solve the problem

  You can read my wiki article on how to solve this specific problem. Attention, it requires technical skills to some extent. That being said, here is the link:

  Windows Update stuck on "checking for updates... ».

  Option 2 - use the Roll-Up of the Windows Update

  Recently, Microsoft has packed all the updates of Windows 7 over the past five years in a single, easy-to-install package. Instead of spending hours trying to install updates 200 +, just install the roll-up and make. Personally, I would say this to option 1. I wrote an article of wiki for more details. Here is the link:

  Using the convenience of Windows 7 cumulative hotfix (SP2)

• Windows 7 stuck loading at the Welcome screen

  -Loading of Windows 7 stuck on the Welcome screen

  -Only works on Safe Mode, safe mode with network works well

  -Starting repairs na not

  -I don't have a Windows 7 CD or the HP recovery CD

  -I've never had viruses or malware or connect USB drives for this laptop

  I got a blue screen down yesterday (no external connected device), after which Windows does not go beyond the loading screen. I have not installed the new drivers and programs recent. The last thing I've updated some Adobe applications ended a month ago but my latop working well at all until this blue screen suddenly. It is also the first blue screen crash in like 2 years.

  What has not worked:

  Start by using last good configuration, under the main boot menu

  Uninstalling the drivers I thought to be the cause, in safe mode

  Msconfig: Disable everything under services and startup

  PROMT command: Sfc/Scannow

  My system does not display the restore points

  However, I found restore factore default but that's the last thing that I want to try because I have to do my music and adobe production apps back will cost a lot of time and data.

  Norton Bootable Recovery Tool will fix the problem?

  Product name: HP Pavilion DV6 Notebook PC
  Operating system: Microsoft Windows 7 (64-bit)

  I have no am HP recovery CD or a CD with Windows 7. Traore is something else I can try without having to go through the service center because it's a wind

  I asked the Norton Bootable Recovery Tool in my original post. Or maybe Windows 7 installation of a flash drive? Or anything from the command prompt

  Also, how can I connect USB devices in safe mode? It does not appear

  You can download the ISO image of Windows of oficial from here: https://www.microsoft.com/en-us/software-download/windows7