Restore from a file of lrcat-journal

Similar Questions

• Problem restoring from backup files

  Because I had to reformat, I tried for days restore files from backups. Backups are on a removable hard drive, I have: who is connected to my computer, and I can see the files by right-clicking on the folder.

  So I go to the center of backup and restore, click on restore files and get the message, "There is no backup on this computer." (Even though I know there are).
  If I click on advanced restore and restore files from another computer and check files from a backup made on a different computer. I'm sailing on the 'I' in the car. In the Date and time column, he later shows several backups, but in the other column, it says: "backup location is not available."
  How can I get the program to recognize that the "I" drive is, in fact, connected to the computer?

  I gave up and called the neighborhood guru. He discovered that it is possible, by searching the backup files, to copy the selected files directly in the records desired on the main drive, without going through the restore function. I don't know why it works like this, but I get back my files. Thank you for all the time spent on my problem.

• VCS restore from backup error

  Hello

  I have a problem with system restore from backup on the VCS X7.2.2 SW version. When I want to restore the backup system I get an error

  System error: invalid or missing system restore configuration data.

  I tried to downgrade VCS Cluster of X.7.2.2 to the SW X7.1 version. I made backup before you demote two peers. Perform later after some tests, I've upgraded VCS to X7.2.2 and wanted to restore the system backup created before the downgrade. But it is not possible, I just get error mentioned above, it is same on both peers. Even when I am creating a new backup and imediatelly try to restore from this file, I get the same error. Backup file looks good, I tried to restore this file to the VM system, and it has been restored correctly.

  Do you have an idea what might happen and how to solve this problem?

  Thank you

  Hi mark, have you tried to reinstall the respective software of VCS on the failed device and try to restirong the valid backup of the same version of software?

  BR, Mahesh Adithiyha

• I can not restore from the backup 'bookmarks-2013-03-31. "File not supported".

  I use Firefox in Swedish, but I think that these English terms:

  I did a back-up of my bookmarks in Firefox before I formated my PC, which resulted in this file: "bookmarks-2013-03-31". It's not an HTML-file and I think neither an JSON-file. When I'm now trying to "recover" the bookmarks from this file, it say's that the file-type isn't supported. What the heck?!? A back-up file that isn't supported by it's own program??!?
  (I just did a quick and simple back-up, and am now trying to restore it. It shouldn't be any problem, as I see it).
  

  Make sure that the bookmarks backup file has the correct file extension:

  • .html for HTML backup
  • . JSON for JSON backup

  You can check the type via the context menu of that file and open properties.
  
  If you are unsure of the type of file, then you can open the file in Firefox via "file > open a file.
  A JSON backup will appear as a single line of text without line breaks and one backup HTML in a web page with clickable links.

  A JSON backup begins with: {"title": "","id": 1, "dateAdded": }
  
  An HTML backup begins with: <! DOCTYPE NETSCAPE-Bookmark-leader-1 >

  Add quotation marks ("" ") around the name to rename the file with the correct file extension if the current file extension is hidden, or if she does not work otherwise.
  
  Check the file type in the properties using the context menu to make sure that the change was successful.

• My Favorites are lost and Firefox can not restore from backup with this error msg "Unable to deal with the backup file.". Someone please help.

  I use Firefox 12 on my Macbook Pro, it crashed and when I rebooted, all my favorites have disappeared. When I tried to restore from the backup files, he returns with "Failed to process the backup file." Someone help please I would have lost years of bookmarks.

  Thank you

  Hi guys,.
  I also experienced this problem and based on the previous explanation in one of the threads here I got the following article - http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

  I myself have deleted only the file places.sqlite and places.sqlite.corrupt from the profile directory and was able to import my favorites since the backup file successfully.

• File restore from Time Machine Yosemite to El Capitan

  I need to restore a single file from a Time Machine backup of Yosemite to my new iMac El Capitan.  The file in question has been saved from a Mac Pro from 2008 to a Time Capsule.  I put Time Machine in the dock and right clicked on it, so I could navigate "Other Time Machine disks" and I am able to see the Mac Pro to backup, then select it.  However when loading the backup, it's for my new iMac and not for the Mac Pro.

  How can I solve this problem?

  Hi jt

  To be honest, the easiest is to go through the Finder. Navigate to the document you want and copy. Then simply paste it where you want.

  The finder will allow you to see all of the back-ups no matter the OS at the time.

  Hope this helps, Greg

• I deleted by mistake the pic files, ran sys restore from an earlier date, always missing, suggestions

  try to burn photos to a cd, pic files deleted by mistake, can not find all the files. has a restored system since 2 days earlier (point), files are still left, they are not in the trash. anyway I can find/restore the photo files?

  Hi and welcome to the forum. Unfortunately, the system restore does not monitor and/or backup of personal data. This is left to the user. It only back - up system files. However, your photos can probably be recovered using Recuva from Piriform, the creators of Ccleaner. Stop using the computer NOW. The more you use it, more files will be overwritten and destroyed. When you use Recuva to recover the files don't be a noob.  Read the help text. It is because they know how to use their software. If your system has a logic or slave drive put the files recovered on it, or if you have an external one that works as well. Chances of recovery improve drastically by placing the recovered files on one drive other than the one they were deleted on.  The link below is the portable version, it does not settle. It is a stand-alone application. This will also help since you're not going to install software.

  http://www.Piriform.com/Recuva/download/portable

• Is there a way to restore a SINGLE FILE in a folder deleted from the Recycle Bin?

  Suppose that you remove all the contents of a folder that contains the files and subfolders. If you open the Recycle Bin, you can see a list of deleted files and subfolders, but there is no way to see the files in the subfolders. So, if you want to restore ONLY a single file in a subfolder of the deleted, it seems there is no way to do it. You can only restore the entire sub.folder, which is not necessarily what you want, especially if you filled out the application parent with other files and subfolders after the deletion.

  Is there a way to restore a SINGLE FILE in a folder deleted from the Recycle Bin?

  Another method would be to drag the folder to the Recycle Bin on your desktop. Open it and recover the files required - re - delete the folder.

  @ Palcouk... you can actually retrieve files deleted, even when they are home to recycle the locker to restore a previous version of the folder parent; These come available restore points so not always guaranteed, but he made the most of the time if action is taken quickly enough. :) Ric

• Lightroom - how to restore backed up files (not the Lightroom Catalog) from one external drive to another?

  How to restore backed up files (not the lightroom catalog) from one external drive to another.

  I've recently saved my photo files to one external drive to another. The backup (carbon copy clone) pointed out some files corrupt on the original drive.

  I deleted these files and find good copies of Time Machine backups.

  I want to get rid of the original external drive; use the recent backup as my main outside and then save it to a new disc.

  I'm not sure how everything is point lightroom for backups so he knows look on the new drive instead of the old drive and all points of exclamation and question marks go away.

  There are close to 60 000 images in several files with a 'parent folder."

  My best guess is Lightroom Help - create and manage folders - locate missing files

  Can I point to the folder of one of their parents, and all of the subfolders will return?

  This is the process for recovering files in lightroom and there will be a problem with so many photos?

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

• ORA-01152: 1 no file has been restored from a sufficiently old backup

  Hi all
  
  I have restored my database,
  
  and after it's over, I've tried.
  
  RMAN > alter database open resetlogs;
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 2010-05-26 14:53:08
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: ' D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF'
  
  
  is there a solution to the situation?
  
  Thank you
  
  Ugur

  Here is the explanation:

  ORA-01152: file string has not been restored from a sufficiently old backup

  Cause: An incomplete recovery session was launched, but an insufficient number of logs have been applied to standardize the data base. This file is always in the future than the last applied log. The most likely cause of this error is forgetting to restore the file from a backup before proceeding with an incomplete recovery.

  Action: Apply more marbles until data is coherent or restore the database from a previous backup and recovery of repeat file.

  Also, check out the following link:
  http://oraware.blogspot.com/2008/05/ora-01152-file-1-was-not-restored-from.html

  Published by: Kamran Agayev, a., 26 May 2010 17:02

• restore from old backup files

  Hello
  
  I backed up the entire database in ' / u01/backup/%s%d.dbf ' in shape and then moved to another directory as "/ u02/old_backup /...» ». after restore spfile and autobackup controlfile controlfile, who I can tell rman backup files are in this directory ("/ u02/old_backup /...") ») ? and restore from that?
  
  
  
  
  When I run 'restore database', there show me:
  
  RMAN > restore database;
  
  From restoration to 23-SEP-08
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 586 devtype = DISK
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 2008-09-23 15:28:01
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  
  THX in adv.

  Catalog starts by ' / u02/old_backup /' noprompt

  Khurram

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.

• restore multiple system files from Recycle Bin by using the command line

  Hello world

  I ' v done gone wasted with this one

  I downloaded a third party software to delet all files duplicate on my laptop

  unfortunitly I completely forgot I had put all the files in the files of system including visible on partion 1 running windows 7, bye bye file system

  Now, I can't find my installation disk to restore the system files and don't have not one partion factory repair, also I can't start in safe mode with command prompt.

  what I got is windows server 2012 on the partion 2 that works very well

  I found the folder bin recyle for windows 7 opperating system while in server 2012 what I want to do is to restore all the files not only some like fortunately we who will get all my files back in there right posion with fear that the time spent...

  

  now, there is another way I could restore these files but unfortunitly I don't have enough room in my score didn't do the restore

  I found under the disk management Explorer/properties/previous vertions, but did not...

  

  appoligies for the bad spelling

  Any help would be appreciated

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Help please... Replaced the hard drive of MBP, restored from TM, but the Windows XP virtual machine does not start

  I replaced the 250 GB hard drive in my MacBook Pro early 2009 with a 500 GB drive, it the Mac OS extended (journaled) format and restored from my Time Machine backup.

  Now when I try to start my Windows XP virtual machine (using Fusion 2.0.6... planning upgrade to 3.1.2 but wanted to validate all was well first), I get BSOD, even in safe mode.

  I have my vm separately saved on a network drive data files based on things that I had read before, I do not think that TM backup of virtual machines. However, a friend with a similar setup with more knowledge I think because I could see my Windows XP vm VMWare listed under 'Documents' in Time Machine showing its full size, it has actually saved and there restore it. Apparently he has done this successfully before.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  TIA!

  Katie

  To be clear: you have restored VMs from the disk or network time Machine?  And if the network drive, what backup method you use?  (i.e.: have you just copied engine off the computer virtual package or not?)  Can you copy/restore the virtual machine to the network again drive?  What is a virtual machine that has the error, or other virtual machines have problems?

  Time Machine backup correctly a virtual power off machine. But since Time Machine works automatically, you often will get not a consistent backup unless you do some tricks to make sure Time Machine backup only when you use a virtual machine.  (i.e.: turn on Time Machine only when you're done with the virtual machine.)  Thus, it is normally recommended to exclude the virtual machines from Time Machine and use another method to back up virtual machines.  Your friend is lucky or is only backup virtual machines powered off.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  The Mac player Paritioning is unnecessary unless you use Boot Camp or have required another for the partition.

• 2012 MacBook Pro VERY slow after restoring from time machine

  Recently, I upgraded my hard drive on a seagate drive. I went from 500 GB to 1 TB. The installation went well. Later, I followed the steps to set up the hard drive:

  1. start the computer by using the R command

  2. open disk utility

  3. formatting the new hard disk by the computer specifications

  4 closed disk utility

  Then I restored from a time machine to the top. It took about 3 hours I had about 350 GB of data to restore. Since that time, my computer is moving very slowly! For example, the start-up takes at least 15 minutes for loading applications. Between the tabs in Chrome takes about 45 seconds to a minute. Loading a new web page takes about 3 minutes or more. Open an application like Evernote can take 5-8 minutes. Same shutdown takes about 10 minutes.

  In a previous forum, someone suggested to take a look at errors in the console. I have no idea what it means. Can someone help me figure out what this topic?

  Here is example of them below:

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Automator.app/Contents/MacOS/Automator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app / happy

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading of files-data Applications/App Store.app/Contents/MacOS/App Store

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data file Store.app/Contents/MacOS/App Applications/App Store /... namedfork/rsrc

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents/MacOS/Calculator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app / happy

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-Applications/Calculator.app/Contents/MacOS/Calculator/... namedfork/rsrc file data

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading of files-data Applications/App Store.app/Contents/MacOS/App Store

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app/Contents/PlugIns

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents/MacOS/Calculator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents/PlugIns file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents/MacOS/Automator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-Applications/Automator.app/Contents/MacOS/Automator/... namedfork/rsrc file data

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calendar.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calendar.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents/MacOS/Automator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calendar.app/Contents/MacOS/Calendar file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-Applications/Calendar.app/Contents/MacOS/Calendar/... namedfork/rsrc file data

  If you haven't done so already, please try first this simple step .