Restore my mac at the factory to update settings for macOS sierra/el capitan?

Similar Questions

• Clueless users accidentally restore their machines to the factory settings. How is that possible?

  I had one up to four cases where users have restored their machines to the factory settings. These users know nothing about computers and appear to be shocked as much as me on the fact that it has been restored. By default, all windows restore features are disabled by group policy which covers everyone. This means that they are using the Dell restore feature on their machines and unknowingly restore their systems. It only happens on newer Dell computers that we began to receive that comes with Windows 7.

  The last of them was the straw that broke the camels back. She said she kept tripping his power strip that caused here system constantly crash. I don't know who got the windows of catering for here to push blindly. She does not deny that she does nothing wrong and now trying to blame us (IT Dept) for the system being reset.

  Is it possible that the System Restore automatically after constant incidents or the user must press a button to get there? Questions that you need to restore, I see that there may be a restoration to a simple pressure to default settings. Or am I wrong?

  I found as follows to disable the system restore feature Dell and will apply to all new machines. I searched for examples of what happens to others but have not turned to the top of any "accidental restores.

  wesodo,

  System Restore should not be the problem, something has caused the shutdown of the system. Try to run full diagnostics, press F12 on startup and report to the back of any error message.

  Since you are the it Department, maybe delete the original image, given that you should have drives for the operating system for each system. If no disk were made, the attempt to read...

  Windows 7 - IMPORTANT Windows 7 to create backup discs

  I guess that when the system crashed, he triggered the problem with starting the system. The person should have come to you at this moment there, but didn't. Then they tried to startup repair, when they were invited, then it did not work, then, you are prompted to restore the original image system. If the original image is deleted, then they will have to come to you for help.

  Rick

• I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  Thanks, I have solved this problem, simply delete the old and manually I have brand new!

• Is it possible to back up and restore a U300s to the factory settings?

  I decided to buy a U300s. Since it is not an optical drive and therefore does not come with any installation media, I'm a bit confused how I could backup the drive so I can later restore to the default settings.

  Is there a way to copy the content of the internal on a USB to allow SSD to boot on the USB key? Is it possible to restore the SSD in the exact state wherever it was when it left the factory?

  A little more detail...

  I plan to install Linux on the U300s and didn't want to dual boot Windows. So I'll be reformatting and using the entire disk for Linux. However, there are a few rare times where I might need to start Windows (for example BIOS update Setup). Preferably, I would like to have a USB collecting dust somewhere that I could start in these rare cases.

  I wonder if something like this might work:

  1. Start a new U300s with a live Linux USB flash drive
  2. Use the dd to clone the SSD on a portable USB drive
  3. Install Linux
  4. Start Windows from the USB drive cloned as needed

  Would this be something like this work? I prefer to do all this Linux because I have very little experience with Windows (I can barely do anything), but use Linux for 15 years and more.

  Using the software onekey recovery start in windows, there is an option to save an image of the disc on a DVD external U300s of origin. It's tedious, but you can use a virtual DVD drive to achieve. I found a free and set the size of disk backup 8 GB or something, then ran the backup saying onekey recovery backup on the external virtual drive.

  Take a look at this and previous pages of the forum to get info on how todo it.

  Worked a charm

  Only problem now I guess that could recover from that backup, because it's too much to be burned onto a single DVD. Some combo of virtual disks again and maybe an external USB drive.

  Let us know how the installation of Linux.

• Need to do system restore after you perform the most critical updates

  Since getting internet cable in January, and the creation of a network, I couldn't install more updates to Vista security on my laptop Dell for 5 years.  Every time I have download and install, the next time I start my PC, repair Windows startup program is displayed because Windows cannot start.  The only solution never finds it is to do a system restore, which of course gets rid of all the updates of security that I just installed.  An exception to this rule are the updates with a tool to remove malicious stuff.  Those who work.  And my works of Bit Defender.  But I'm heading out for big trouble not being able to do all the other critical updates?  What do you think is the problem?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  I suggest you to install the updates one by one and...

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/9b7aafc2-5e3c-4d2D-BC01-4b81d319922a >

  NOTE: any changes you make now will NOT affect updates already in the queue of the installation. For which is concerned about the automatic updates, you have already approved these updates.

  UTC/GMT is 07:30 on Tuesday, may 1, 2012

• I'm trying to restore Vista OS to the factory settings and it requires a password that I never created.

  It is an Acer Aspire 5315 that my mom gave to my daughter. She says that she has never created a system restore point that requires a password so how to do this? Oh, and I have no disc as it came preloaded.

  Hello

  A System Restore Point is not the process of factory settings recovery.

  Using a System Restore Point puts the settings of the computer to an earlier date.

  Recovery to factory settings is to reinstall the operating system to how it was when new.

  Some Acer models have a default password that you use to start the process of the "hidden" recovery Partition Recovery

  Usually press you Alt + F10 at startup to start the process of relocation and Acer default password should be 6 zeros, unless someone has changed.

  If not, give Acer a phone call.

  See you soon.

• I have stopped way to update for LR6... now the bed message "update not for iMac 10.8.5"

  I have dec 2012 iMac 10.8.5. He was CS6.

  2 months ago that I bought the drive for Lightroom 6 because I don't want to use cloud. I installed it and the two have worked well...

  Recently... I started updates for CS6 and LR6.

  And in the Middle updates... with panic and perseverance...

  I turned off my iMac in the middle of the update... realizing turned their availability of cloud...

  Now my CS6 icon is no longer, it is replaced by the Ps icon (when I activate it, there still etiquette "Photoshop CS6"). This method works.

  the Lr icon is, but when I try to turn it on, it has message...

  "You cannot use this version of the"Adobe Lightroom.app"application with this version of Mac OS X.

  You have OS X 10.8.5. The app requires OS X 10.9 or higher. "The LR6 will no longer appear.

  How to get older versions of CS6 and LR 6?

  You must uninstall, remove, your current installation of LR and then go to this link

  Install Photoshop Lightroom

  At the top, you want to download the Mac version of the Application Installer and refresh forever. that will return you to the original version of LR 6.

  But I suggest that you upgrade your operating system to El Capitan and continue to update LR to the 6.5.1 update this link.

  Update of Lightroom

  NOTE: do not install the update of 6.6. Install the 6.5.1 update. The 6.6 update bugs in there.

• Problem with the security sysytems update KB3110329 for Windows 7 64 x-based

  Microsoft is aware of this problem with security update KB3110329 for Windows 7 x 64 systems? Have they fixed it? Thanks to John Butler to isolate the problem of configuration updates from January 12, 2016.

  Bill Blair

  Dear Jayant Gupta,

  Thank you for your response. When I tried to install the updates from 12 January 2016 on my Windows 7 computer, I met a problem at the stage where I have to shut down the computer to complete the process. When configuring updates, he remained at 12% for a very long time and then permanently returned to the opening of session and when I checked the history update based on the x 64 updates eleven have been identified as having failed.

  I ran to the resolution of the problems of Windows Update. I did not try to reset the Windows Update components for fear of making things worse. I see at least another user, John Butler, has encountered the same problem and he identified the update of security KB3110329 as the cause of the problem of configuration.

  Later, I downloaded the updates again and hid and then successfully installed their KB3110329 leaving unchecked everything.

  Currently, I have hidden KB3110329 and wait for the opinion of its repair.

  Thank you for your help.

  William Blair

• The updated firmware for the hp1606dn will be available for MacOS?

  The latest version for MacOS install is not 20120130 as requires it the "critical update for HP.

  Hello
  We downloaded the latest version:

  Exit the: 14-02-2012
  Version: 20120130

• Popup error when using the AJAX or update Action for the region or a State

  Hello

  I had a problem with an application that I developed and I was banging my head against the wall with this for some time without success. Several pages in my application rely on the use of AJAX to refresh a region on the page with the updated data, running every 5 seconds. I have the following code in the foot in my region:

  var refresh_region = function (region_in) {
      try {
          jQuery(region_in).trigger('apexrefresh');
      } catch (e) {
          //Suppress error messages
      } finally {
          setTimeout(function() {refresh_region(region_in)}, 5000);
      }
  }
  refresh_region('##REGION_STATIC_ID#');
  
  
  

  What is happening is that I often have a popup with the title "Message from Web page:" and one of the descriptions following error (with the last being the most common):

  • : Error - HTTP Version not supported
  • Error: error - unknown

  The problem is that this page is used on the kiosks without keyboard, and once the error popup is displayed, the page continues to answer and user interaction to click on the Ok"" button. Another question, which is even more frustrating, is that these windows will accumulate above the other nearly one hundred sometimes profoundly, to the point where, sometimes, I need to force, exit the browser or restart the kiosk. There are also cases where the entire application stops responding and none of the pages will load. The only way to solve this problem is to have my DBA restart Glassfish. He went through some of the papers, but he sees nothing specific that helps him understand why he keeps to himself, but he believes that all these popups eat connections until the server runs.

  This has been a recurring topic since the app went live and I had hoped that with the help of a block try {} catch {} would prevent these popups errors but no luck. I also made a copy of the page today and refresh moved dynamic Action using the timer plugin but the popup always appears. I am following up to see if it happens more often than the AJAX approach.

  In the end, there are two issues here:

  1. What causes the error in the first place?
  2. How can I prevent the error popup windows until I can find #1

  I have tried everything I can find online to disable popups, all of this without a bit of luck:

  • Using try {} catch {}
  • Disable script debugging in Internet Explorer
  • Uncheck 'display a notification of every script error '.
  • Catch the window.onerror event

  Does anyone have any suggestions on how I can avoid these popups?

  I have a copy of the application on apex.oracle.com:

  • Workspace: SCCC_TEST
  • User/Pass: TEST/test
  • Page: 5

  Thank you!

  Once I started to think the ajax Manager that I started, I was wondering if ajax would actually raise an error at all, and it is not just the success of shooting when but throwing an error because it cannot handle the return (error page html for example). I'm not sure.

  You can try to use this code, which will replace the current call and will call _Appel with your own parameters. _Appel is a private member is not accessible so it's probably the best alternative. Not really a hack in my book. The structure is in place, then why not.

  //preserve original function
  var asw_orig = apex.server.widget;
  //override existing function
  apex.server.widget = function(pName, pData, pOptions){
    var lOpts = pOptions;
    //set the error handler function
    lOpts.error = function(){alert("this is my error handler function");};
    //pass along the variables to the original call
    asw_orig(pName, pData, lOpts);
  };
  

  I wondered if maybe the session may have expired at a certain time and therefor, you found these errors, because the update is not aware of this and therefore makes invalid calls. Just throw something out there.

• update problems since macOS Sierra to iMovie

  Hi everyone, I hope someone can help me out here because I'm starting to get really frustrated.

  I have a MacBook Pro and yesterday I upgraded to macOS Sierra and I regret it now because when I wanted to work with iMovie today he is more worked how it used to. I make youTube videos for a living and I'm already a day behind my schedule download because of this problem. Basically what is happening, it's only when I imported my video files to my SD card into iMovie files seemed normal, however when I put them in a project and began to play them I noticed that the color was distant, it almost looks like there is a misty overlay. At first I thought that maybe my DSLR camera has broken out and checked the files on the SD card (played files to QuickTime) but they seem quite normal and how they should look, iMovie for a reason any turns them... I have no idea how to solve this problem, because I'm not even sure what really is the problem. Can someone help me please?

  Hi, Anny,

  I don't know what is happening with the change of color in your timeline.   Whenever there is an upgrade of the operating system there always is the possibility of conflicts with specific applications until the bugs have been worked.  So, it is possible that your question is related to your recent update to OS Sierra - hard to say.  I'm not aware of anyone who still displays with your problem.

  Given that the problem appears only in your timeline, maybe media are complex and your computer is hard to deal with in the time line or keep in touch with your editing.

  You can see if the problem is linked project by creating a new project with the same or different media.   Is it possible to have a color filter activated inadvertently?  You can also try to reopen iMovie while maintaining the option and command keys and selecting Remove preferences.  Sometimes, it allows to launch iMovie in a different account, as your guest account, in which case there is a conflict with your current user account.  If none of the works above, you can try to create a new library on your boot drive or disk formatted Apple iMovie and see if your projects are working properly.   Another possibility is to restore your old operating system from Time Machine.

  In any case, I think that once the film is shared out he will play with his normal colors.  Try sharing file on your desktop to confirm that.   If he plays well, at least you'll be able to keep your schedule download then you want to solve your problem.

  Best,

  Rich

• Upgrade to Windows 7 Ultimate and highway 2010 receives the error: "your registry settings for this application no were not copied correctly."

  I updated from XP Pro to Win7 Ultimate.

  When I try to install Highway 2010 (that I had before) I get the following message

  "Your registry settings for this application were not copied correctly. To correct these settings, run the installation of this application from the location where you originally installed it. »

  I tried the suggestions without success. So what do I do to fix this?

  I have found since that when I uninstall several files are missing, 41ce1.rbf & 41d81.rbf are later. It seems that highway will not properly work without their files (I guess here).

  So where they are or how can I get the.

  I get the same problems when I try to install Highway 2011 test, I don't buy the full program so the custom of trial run.

  Chris Townsend

  Now, I know the .rbf files are files of Roll-back.

  Hello Lrchr,

  Your question would be better addressed in the highway, streets and trips and MapPoint.
  Click here for a link to repost in the forum of the highway. They will be better able to solve your problem here.

  I hope this helps.

  Marilyn

• After restoring the factory network card settings will not start

  I have toshiba L300 satt he wouldn't start so after restore settings factory network card does not start so can't do updates cannot find wireless network and I tried plugging cable ethernet directly to the router still cannot be detected or nothing comes with the network adapter won't start not error code 10 tried to load the driver updates but it's so far has got no restore point or restore system disks completely made through bak right discso to normal, says its running vista 32 2006 windows looked everywhere no joy please don't help the driver is realtek rtl8101

  Hello

  go to toshiba and download the drivers for your model laptop

  There is a download tab at the top on the link below

  use the computer that you use to get here download and save to the desktop

  copy to a flash drive - transfer and install it on the other

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Satellite M40 - how to restore the factory without ODD settings?

  Hello

  My HARD drive crashed a few days ago on my Toshiba Satellite M40.
  So I bought a new HDD IDE to use my Toshiba WinXP recovery DVDs. But my internal optical drive does not work.
  My BIOS does not let me start on an external optical drive...
  I tried to use another laptop recovery DVD but it says 'this recovery DVD is only for Toshiba laptops.

  All I want is to try to find a way to use my restore DVD...
  Can someone help me? or ideas?

  Concerning

  Hello!

  I think that every resident has reason. You can restore t to factory settings on the recovery disk Toshiba no CD/DVD drive work.
  If you want to use the Toshiba Recovery disk, you need to replace the CD/DVD drive!

  But as resident suggested, you can install Windows XP with a disc of Microsoft. Therefore, you don't need a CD/DVD drive work.

  It of your choice what you do! Either you replace the CD/DVD drive, or you use a disk of Microsoft.

  Good bye

• How can I get the 4.2 update lightroom for Mac

  Hi, I have problems updating to 4.2 Lightroom on my Mac.There does not seem to be a patch, it has been suggested that you should uninstall 4.1 and reinstal the complete version 4.2, is this correct?

  Richard

  Yes, LR updates always contain the full program, so just install 4.2 or 4.3 works.

  Mylenium