restrictive access privileges

Similar Questions

• Impossible to download Acrobat Pro because of the 'restrictive access privilege' on Mac

  I am unable to download Acrobat Pro because of the 'restrictive access privilege' on a Mac Mavericks folder ('Applications', where else?), but I left "Read & Write". I won't install anywhere else, so need help. Thank you.

  Mickey McFly please make sure you download your download folder or a different folder in addition to your Applications folder.  Once Adobe Acrobat is downloaded you can install the software in your Applications folder.

• Error: Not enough access privileges

  Try to add a video that is in the correct format for my itunes library, but I get this message "attempt to copy to disk"OS"failedd.  You have enough access privileges for this operation.  I am logged in as administrator.  What should I do?

  You add with permission of right and property (including all files and subdirectories) for the folder music in your profile, and regardless of the folder allows you to store your iTunes library.  Make sure that do you on key issues.  Do on the tab page main secirity and also if necessary in the special permissions under Advanced section (where you can find the property tab).  Make sure that everyone is not seen to refuse approval of anywhere (if so, change it to allow and give read-only access).  See if that solves the problem.  Unlike XP, being an administrator in Vista gives you unlimited access to everything - there are a lot of restrictions.

  Here is some additional information about permissions and ownership that can help if you are having problems or need help with specific procedures:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to restrict access to users?

  Original title: ask the community

  Hello

  Operating system is Windows 7 Pro 64 bit.

  Scenario:

  Drive C is about 200 GB

  D drive is 500 GB.

  Want to keep the drive clutter free C, so I created folders for music, videos, etc. on my drive D. I downloads I need to restrict access to all users except those with administrator privileges. How can I do this?

  Vijay.

  I'm sorry that I didn't have this update. At the end of the day, it is quite simple.

  Right-click on the folder, go to "share with"select"Nobody" selected "change sharing permissions."

  Adds the user in the drop-down list just to be sure.

  Tried to access the folder since the account other users & got an access denied message. If I clicked on continue after he asked my administrator/user password. It was good enough for me.

  Vijay.

• Restrict access to vcenter

  Hello world

  We have 5 vcenter servers in our environment of support, but we want that users specific access to the 1 single outside the other server vcenter vcenter server. Users who currently have admin privilege to all 5 VC, so let me know how to restrict access to the other 4 VC. Appreciate help on this. Thank you

  Thank you

  vm2014

  You can add a permission "No access" only for that user on the top level of each vCenter you want this user do not have access.

• How to restrict access in EDITION of APEX Applications in the same workspace

  Hello
  
  I have a workspace that consist of several say application APPL1, APPL2, APPL3,... etc...
  This workspace has access to several... say developers Developer1, Developer 2, etc...
  
  How can we restrict access in EDITION of Applications for a particular user.
  
  for exp.
  
  Developer1 should be able to access/change only the APPL1 & the APPL2. He should not be able to modify APPL3.
  same way... * Developer 2 * should be able to access/change only APPL3. He should not have editing access to APPL1 & APPL2.
  
  
  Thank you
  Deepak

  Hello

  I think that's not possible. At least I don't have to see how it could be done.

  This is why there are work spaces. You must create a workspace clean to all applications for example.
  Then of course there was maybe still problem with the analysis of access privileges to the schema if for example all 3 applications use the same scheme of analysis.
  You must assign same pattern to all areas of work, and then all of the developers of the workspace that you can change database schema objects.

  BR, Jari

• I can't open my Dungeon of docs word any error message "user lacks access privileges.

  I can't open my imported word docs Dungeon receive an error message 'user lacks access privileges' ideas of what she may be contacting Apple and they tried a lot of things and tell Microsoft that the docs are corrupt and nothing wrong with the word 2016.

  More info, please.

  When you say that it is "any word docs", do you mean another user on the same Mac, another Mac, an earlier version of Mac OS X, an earlier version of Word, another type of computer, from another type processor, or something else?

  These documents are currently stored in your Documents folder, into another directory user on an external drive, on a server, or elsewhere?

  You do it on El Capitan? What version of 10.11.x?

  Your copy of the word 2016 is perfectly up to date?

• Restricted access has changed

  I'm getting frequent notice about "Changed to restricted access, emergency Service is blocked. I don't know why it is so frequently. It is related to which of the functions? Can someone tell me please how to disable it?

  
  

• Problems with word and PDF after computer crash. Error "user has access privileges."

  Problems with word and PDF after crash

  My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

  Hello world
  I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
  Thank you.

• How to restrict access to the drive of Wndows xp sp3?

  I have 3 user account on my computer, it is has the administrator rights and the other is a standard user account.

  I want to restrict access to all readers for the standard player.
  I used gpedit.msc to enable the administrative model, but it also limits the account admin and me to access the road
  OS: windows XP SP3
  Please advice
  Hi Utkarsh.Ranjan,
   
  If you want to restrict access to a drive by using the Group Policy Editor, you can not apply for a particular user account. This will change for the user accounts.
   
  You can't restrict access to the complete transmission. However, you can resrtict access to folders and files inside a car to a particular user.
   
  Refer to the section "set, view, change, or remove special permissions for files and folders" in the following article and follow the steps to remove the authorization of the user access to the file/folder.
  How to set, view, change, or remove special permissions for files and folders in Windows XP

• BEFSX41 - Blocked Services in restrict access tab is grayed out

  Blocked Services restrict access tab is grayed out, so I've updated to the current version of the firmware:
  Release date: 14/08/2009
  Current firmware: Version 1.52.16.4
  Product part No.: BEFSX41 v1/v2/v2.1

  Hung services is always grayed out.

  I have tried Linksys chat, but they do not help this serial number is "out of warranty". So I'm looking a way enable the blocked Services feature. .  Does anyone know how to activate it?  Thank you.

  Are you sure that you create an authorization rule and not a deny rule. Hung services are available that allow for rules, i.e. you want to allow internet traffic except some blocked services. A deny rule will block all internet. In the demo UI I choose blocked services if I select "allow".

• Restricting access to Internet WRT160N problem

  I use router WRT160n.

  I used the access restriction to restrict internet access for 12-05:30 every day.

  during 12-05:30 every day, when I use my laptop to access the internet by wifi, the site is blocked, and internet access is limited. This works correctly.

  However, when I connect the lan from my laptop to the router and try to access the internet, I can browse the site normally. I can browse google, yahoo and all Web sites. in this case, the access restriction cannot funciton properly.

  My question is:

  Why restricting access can work when I use the lan cable to connect to the router?

  How do I fix this so that the router can block all access to the internet, even when I use the lan cable to connect to the router?

  Thanks for your help!

  If you are using an ethernet cable, your computer uses a different MAC address and a different IP address on your local network. Basically, for the router, it looks like a completely different computer. You need to add the IP address or a MAC address restriction policy.

• Cannot open backup files. Error "user has no access privilege.

  I can't open the files I copied from my laptop on an external drive. My book, which is running XP, crashed and I had to do a complete reinstall. I had backup files copied to an external drive. I did not use any backup software, just the copy command. But now when I try to open the backup files, I get "the user has no access prvileges.

  I tried ALL of the suggestions found here, unless I missed one, such as the safe boot mode and change the settings and owner privileges. I've logged as an administrator and even created administrator accounts but still no go. I changed the parameters of the owner of the entire disk in the hope of it cascading down to the files, but still no luck. I can get the files to show that the property has changed, but whenever I try to open them, the problem persists!

  The backup drive that I used is now connected to my desktop computer running Windows Vista. Is there a program I can use to hack and open files or y at - it some part that I have not found another workaround solution?

  How can I disable this mode and access the privilege entirely stuff in Vista?

  Help, please.

  After taking possession you must then give yourself permissions to
  access the file.

  --
  ..
  --
  "flight027" wrote in message news: 7d8249e0-8663-40f2-8bf6-d004e3f807b8...
  > I can't open the files I copied from my laptop on an external drive. My
  > notebook, which is running XP, crashed and I had to do a complete
  > reinstall. I had backup files copied to an external drive. I have use any
  Copy the command. But now when I try to open the
  > backup files, I keep getting "the user has no access prvileges.
  >
  > I tried ALL of the suggestions found here, unless I missed one, such as
  > start safe mode and change the settings and owner privileges. I have
  > logged as an administrator and even created administrator accounts, but
  > still no go. I changed the parameters of the owner of the entire disk in the hope of
  > It cascaded down to the files, but still no luck. I can get the files to
  > show that ownership has changed, but whenever I try to open them, the
  > problem persists!
  >
  > The backup drive that I used is now hanging in my office running
  > Windows Vista. Is there a program I can use to hack and open the
  > removal or y at - it some part that I have not found another workaround solution?
  >
  > How to turn off this mode and access privilege stuff completely in Vista?
  >
  > Please help.
  >
  >

• Import of camcorder films / access privileges

  I am trying to download films from camcorder to my computer vista laptop but import is refused - "impossible to import becuse you don't have access privileges for the folder to import to." photos of drive C is the folder it will allow me to select I have downloaded images from yesterday without problem. How can I allow these films to be imported?

  It is probably a permissions problem.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If this does not work, please transfer your question in Forum video and photos to http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in graphic problems like yours will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• my wireless connection says "restricted access" no network connection. I used the same key code to get my other computer online

  my wireless connection says "restricted access" no network connection, I used the same key code to get my other computer I can have up to 5 computers online at the same time online.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This means that the computer cannot connect to the router.

  Try this process.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  Above everything is OK, you must be able to connect to the router.  A window that says connected does not mean that you are really connected. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it is not connected in the log to router from any computer that can connect to the router wirelessly with a wire, disable wireless security, (make sure that the wireless SSID broadcast) is on and try to connect with no. wireless security.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET